Kraussmaffei 125-520 C2 M.nr. 61005310 nakup rabljenega (7.518)

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), A total of 9 partially dismantled Krauss Maffei injection moulding machines are available: Lhjdpfeugmx Asx Al Njf 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation is available. On-site inspection is possible.

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Clamping force: 1100 kN, screw diameter: 35 mm, shot weight: 140 g, injection volume: 154 cm³, injection pressure: 2429 bar, max. cylinder temperature: 375°C, weight: approx. 8,000 kg, control system: MC 5 3.0, operating hours: 25,271 h, pump hours: 29,098 h. Included is a linear robot KM LRX 150, travel path X/Y/Z: 900 mm/1200 mm/3000 mm, payload: 15 kg. Documentation available. Inspection on site possible. Lhodpfx Aowz N Tvel Nef

Leto izdelave: 1998, obratovalne ure: 62.144 h, stanje: pripravljen za uporabo (rabljen), Clamping force: 2000 kN, tie bar spacing: 520 mm/520 mm, platen dimensions X/Y: 715 mm/715 mm, minimum mould installation height: 250 mm, maximum opening stroke: 650 mm, ejector stroke: 225 mm, ejector force: 66 kN. Screw diameter: 55 mm, shot weight: 240 g, injection pressure: 2500 bar, stroke volume: 286 cm³, injection unit: 675. Machine dimensions X/Y: approx. 5600 mm/1700 mm, weight: approx. 7000 kg, operating hours: approx. 62,144 h. Documentation available. An on-site inspection is possible. Expected to be available from June 2025. Lhodpfjv Ifwxox Al Nof

Stanje: generalkompletno obnovljen (rabljeno), Krauss Maffei injection moulding machine 25 tons Lsdpfxsrdg Tpe Al Njhf Year: 2000 The IPC does not work (see card)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 1 kos rabljene brizgalke za plastiko Proizvajalec: KRAUSS MAFFEI Tip: KM500-4300CX Leto izdelave: 2010 Zapiralna sila: 500 ton Lhodpfx Aljx Tbfuj Nef Razmak med stebri: 900 x 900 mm Premer polža: 90 mm Maks. volumen brizga: 2.290 cm³ Teža brizganca: 1.777 g/PS Krmiljenje: MC5 Oprema: 2 x izvlek jedra Vmesnik za robota 12-conski vročekanačni regulator Vmesnik za napravo za temperiranje

Stanje: delavnici obnovljeno (rabljeno), Currently, 2 identical machines are still available. Mechanically overhauled machine with new LTG control system StoreControl L. External dimensions: Installation height: 5,200 mm (modification possible at extra cost) Installation width: 1,600 mm Installation depth: 2,800 mm 38 carriers, each with a payload capacity of 250 kg with the following usable internal dimensions: Width: 1,300 mm Depth: 825 mm Height: from 55 to 750 mm Total machine payload: up to 2 x 10,000 kg Start of access opening at 875 mm above finished floor level (FFL), then 875 mm high Color: GREY / BLUE, carriers Sendzimir-galvanized, surfaces cleaned, signs of use possible Lhsdpfx Alsd Hxpvo Nef Performance data: Vertical drive: 1 x 3.5 kW / 400 Volt Horizontal drive: 1 x 0.75 kW / 400 Volt Subject to errors, technical modifications, and detail deviations from the photos. Delivery and installation currently mainly within Germany, Austria, and several neighboring countries.

Stanje: dober (rabljeno), Leto izdelave: 1995, obratovalne ure: 60.000 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 40 mm, razmak između stupova: 470 mm, Naprodaj je brizgalni stroj Krauss Maffei tip KM110-390 C1. Stroj je v zelo čistem stanju, saj je izdeloval medicinske izdelke (glejte slike čistega prostora). Vzdrževanje je do konca izvajal Krauss Maffei. Stroj je takoj pripraven za uporabo in je že razstavljen. Nakladanje z viličarjem. - približno 60.000 obratovalnih ur Ljdpfexbar Hex Al Nehf - Serijska številka: 114104 - Leto izdelave: 1995 - Polž 40 mm - Zapiralna sila: 1100 kN - Razmak med vodili: 470x470 mm - Priključek za izvlek jedra: 1 - Dimenzije: 4,5x1,5x2,2 metra - Teža: 5.800 kg Za vprašanja smo na voljo kadarkoli.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Working area: 2800x1600mm, swivel angle: 90°, parallel stroke: 150mm, clamping force: 700kN, connected load: 50kW, including documentation. Ljdpfx Aloh Nm S He Nshf

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Throughput: 140-180 kg/h, screw diameter: 50-103 mm, screw length: 1,300 mm, max. screw speed: 43 rpm, installed power: 25 kW, operating hours: 62,590 h, including dosing unit with hopper, vacuum pump, barrel cooling unit, and screw temperature control. Lhodpfx Aohz Dyael Nsf

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 504212, vpenjalna sila: 5.000 kN, premer vijaka: 90 mm, razmak između stupova: 900 mm, tlak vbrizgavanja: 1.742 letvica, vgradna višina: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Tie bar distance (h x v): 900 x 800 mm Max. mould opening distance: 1,170 mm Min. mould installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force reverse: 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Lhodpfxjw Dy Rws Al Nef Motor rated current (Iₙ): 170 A Operating voltage: 3 phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged by agreement at an additional cost.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we are offering one of our used injection moulding machines for sale. CONTROL SYSTEM - MC6 TECHNICAL DATA CLAMPING UNIT - Clamping force: 10,000 kN - Tie bar spacing (h x v): 1400 x 1120 mm - Maximum daylight between platens: 1700 mm - Minimum/maximum mould installation height: 700/1200 mm - Platen opening stroke: 2400 mm - Ejector stroke: 250 mm Lhsdjnh Rhvjpfx Al Nof - Ejector force: 226 kN (Reverse: 59 kN) INJECTION UNIT - Screw diameter: 95 mm - L/D ratio: 23 - Injection pressure: 1795 bar - Injection volume: 3367 cm³ - Shot weight for PS: 3064 g - Injection rate: 690 cm³/s - Nozzle contact force: 166 kN Electrical parameters - Pump drive power: 90 kW - Heating capacity: 61 kW Weight and dimensions - Net weight: 65 t - Machine dimensions (L x W x H): 10.98 x 3.29 x 2.49 m As standard, we supply this system in fully functional basic condition. Additionally, as the OEM, we can offer various add-ons depending on the individual case, including: - Energy efficiency updates for the system - Optional: Integration with KraussMaffei digital products - Plasticising unit retrofits - Optional: Organisation and handling of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) With us, you benefit from first-class service, and the option to purchase complete spare part packages for wear parts to ensure uninterrupted production with your new pre-owned machine. Don't hesitate—contact us today for your enquiry!

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334 Ledpjud H Dmofx Al Nshf  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 Ledjuggb Dopfx Al Nehf • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 Lhodpfxow U N Ixj Al Njf • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Saacke TEMINOX GLS 125-45 dual-fuel burner, 10,500 kW, oil + gas. Year of manufacture: 2013. Ljdpfovrkcnox Al Nshf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Fabricant : Krauss Maffei Type : KM 650-3500-700 CZ Année de fabrication : 2007 Commande : MC 4 Unité de fermeture : Force de fermeture : 650 t Course d’ouverture : 1150 mm Hauteur minimum d’installation du moule : 600 mm Distance maximale entre plateaux : 1750 mm Lhsdpfxex Uqa Ds Al Nof Entraxe colonnes (h x v) : 1100 x 900 mm Dimensions des plateaux (h x v) : 1510 x 1370 mm Centrages (buse – plateau éjecteur) : 200 / 200 mm 1ère unité d’injection : Diamètre de vis : 80 mm Poids de dose max. en PS : 1400 g Volume de dosage : 1543 cm³ Pression d’injection : 2205 bar 2ème unité d’injection : Diamètre de vis : 45 mm Poids de dose en polystyrène : 278 g Volume de dosage : 305 cm³ Pression d’injection : 2336 bar Accessoires : 2 électrovannes Cascade 16 voies 3 tirages de noyaux sur plateau mobile 3 tirages de noyaux sur plateau fixe 20 zones de régulation pour canaux chauds Interface robot : Euromap 67 Dimensions : Poids total : 34 500 kg Dimensions totales (L x l x h) : 7,8 x 2,5 x 2,5 m Heures de fonctionnement : 45 400 h La machine peut également être utilisée comme machine monocomposant (1K).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61029386, vpenjalna sila: 2.000 kN, premer vijaka: 70 mm, Oprema: dokumentacija / priročnik, Stroj za brizganje KraussMaffei 200/1400 CX POL BMC je naprodaj v zelo dobrem stanju. Malo delovnih ur, izdelan leta 2017, uveden v obratovanje leta 2018. Krmiljenje MC6. Za več informacij nas kontaktirajte po e-pošti! Hvala! Lodpfewz Iv Aex Al Nshf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 68.500 h, Funkcionalnost: popolnoma funkcionalen, Clamping force 1750 kN Maximum mold opening force 101 kN Travel force, moving platen opening 50 kN Travel force, moving platen closing 42 kN Clamping plate (H x V) 915 x 915 mm Clear distance (H x V) 560 x 560 mm Mold opening stroke 700 mm Minimum mold installation height 350 mm Opening width: 1050 mm Ejector stroke 200 mm Ejector force forwards/backwards 58/28 kN Injection unit: Screw diameter 50 mm L/D ratio 20 Injection pressure 1892 bar Stroke volume 377 ccm Shot weight (PS) 343 g Injection flow 247 ccm/s Screw speed 342 rpm Plasticizing rate 37 g/s Nozzle contact force 84 kN Electrohydraulic equipment: Rated pump motor power 30 kW Installed heating power 16 kW Cylinder heating control zones 5 Oil filling 525 ltr. Dimensions and weights: Space requirement approx. 5.50 x 2.20 x 2.30 m Total weight 10,530 kg Max. mold weight 2535 kg Accessories: - Oscillating elements Additional equipment: - 1 x air valve - Interface for coloring device - 1 x hydraulic core puller - Robot interface according to Euromap 12 Lhjdpfxjykah Uj Al Nsf

Leto izdelave: 2025, stanje: novo, Gravity belt filter system – new – electrically and mechanically pre-wired, ready to plug in for JUNG HF50 / JF520 / JF625 – please specify the machine type when making an inquiry – Ljdpfxjhcn I Te Al Nshf

Leto izdelave: 2021, stanje: generalkompletno obnovljen (rabljeno), used grinding wheel holder for JUNG HF50 / JF520 / JF625 Lhodpfx Ajhcn I Eol Njf - cleaned and inspected -

Stanje: rabljeno, B&R Provit Controller 5C2001 – removed from K-Tec 200-1000S - dismantled from an operational machine - fully functional If the spare part is traded under the exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued following manufacturer feedback. Manufacturer: B&R Lsdpfxop Rb Hco Al Nshf Spare part no.: 1 Manufacturer part no.: 5C2001.16 Condition: used

Stanje: novo, lastna masa: 370 kg, največja dovoljena obremenitev: 930 kg, skupna masa: 1.300 kg, dolžina tovornega prostora: 2.510 mm, širina tovornega prostora: 1.250 mm, višina nakladalnega prostora: 1.560 mm, prostornina tovornega prostora: 5,2 m³, barva: črn, gradbena višina: 2.050 mm, delovna širina: 1.720 mm, Hydraulics, automatic reverse function, hot-dip galvanization, unbraked, aluminium superstructure / tailgate and door combination, *AVAILABLE IMMEDIATELY* incl. aluminium superstructure / tailgate and door combination Superstructure colour: black Technical data: - Type: New vehicle - MOT: New/2 years - Availability: available immediately! - Permissible total weight: 1,300 kg - Unladen weight: 370 kg - Payload: 930 kg - Internal dimensions: 255 x 125 x 156 cm (L x W x H) - Overall external dimensions: 370 x 172 x 205 cm (L x W x H) - Loading edge height: 55 cm Lsdpfxju Htb Ts Al Nohf - Brake: yes - Jockey wheel: yes - Side door: yes - 100 km/h approval: for an additional charge - incl. vehicle documents Superstructure: - Floor: Wooden, Finnish multiplex board - Side walls/superstructure: Double-walled anodised aluminium - Roof material: Full polyester - Chassis: KNOTT rubber suspension axle - Number of lashing eyes: 4 - Tailgate: Yes - Tailgate material: Non-slip aluminium, approx. 500 kg load capacity - Tailgate function: Combination of wing door and tailgate - Interior light: Yes, with switch - Supports: 2 included - Overrun device & brake: KNOTT - Frame/chassis: Welded steel frame, hot-dip galvanised - Lighting connector: 13-pin - Approval: COC papers Standard equipment: - Full aluminium superstructure, anodised aluminium walls - Wooden floor, Finnish multiplex board with phenolic coating - Full polyester roof and front section - Aerodynamic roof and spoiler front section made from polyester - Continuous internal height: approx. 148 cm - Continuous internal width: approx. 124 cm - Rear wing door combination (tailgate + door in one) - Integrated and movable lashing eyes in the side rail system for securing cargo - Interior light - Torsion-resistant chassis - Solid crossbeams for high point loads - KNOTT rubber suspension axle - Automatic reverse function - Knott overrun brake and parking brake - Robust V-drawbar - Plastic mudguards - 13-pin connector - Reversing lights - Large-dimensioned safety lighting - Integrated rear fog light - Jockey wheel with clamp - Splash-proof superstructure - Registration documents: COC papers Retrofittable accessories (on request): - Motorcycle wheel chocks - Motorcycle rails - Motorcycle tie-down straps - Tie-down straps - Additional lashing eyes - Slotted-hole rails for tension belts & cargo bars - Slat rails with rubber coating for tension belts & cargo bars - Cargo bars (steel or aluminium) - Interior lights - Reversing lights - and much more. New vehicle with warranty and MOT. We are happy to offer you suitable financing options! Descriptions and pictures are copyright protected! Over 800 trailers immediately available from our stock! We have been specialists and authorized dealers & repair workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. Delivery throughout Germany available at extra cost! Trailer Centre BAUMANN GmbH Dinxperloer Str. 389, 46399 Bocholt - Errors, omissions and prior sale excepted -

Leto izdelave: 2000, stanje: zelo dobro (rabljeno), Steady rest Bore diameter: 520 mm Center height with base: 970 mm Center height without base: 650 mm Quill diameter: 100 mm Lhsdpfx Alefgwi Rj Nof

Stanje: dober (rabljeno), Hollow spindle stop Diameter 125 mm Lhedpfxedbc E No Al Njf Weight 6.6 kg