Hohner 2 Hohner Šivalni Glavi 43/6 nakup rabljenega (99.529)

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3L3YF03390, moč servomotorja: 550 W, vhodna napetost: 230 V, razmak između stupova: 262 mm, vrsta vhodnega toka: Klimatska naprava, globina grla: 130 mm, pnevmatska povezava: 6 letvica, Ta serija obsega šest industrijskih šivalnih strojev JUKI serije LH, opremljenih z dvojnim iglom in sistemom za zaklepni šiv, ki so bili neposredno odstranjeni iz proizvodnih linij nekdanje tovarne MASI JEANS v Estoniji. Serija JUKI LH-3100 je ena izmed najbolj razširjenih industrijskih platform za šivanje z dvojnim iglom na svetu, znana po izjemni zanesljivosti, natančnem paralelkem šivu in izjemni produktivnosti v zahtevnih proizvodnih okoljih oblačil. Vsi stroji so bili uporabljeni v isti profesionalni proizvodni enoti in so bili vzdrževani v skladu z istim tovarniškim programom vzdrževanja, kar predstavlja odlično priložnost za pridobitev ustreznega proizvodnega kompleta, pri čemer imajo vsi stroji enake delovne načine, skupni seznam rezervnih delov in poenostavljeno vzdrževanje. Ti stroji so idealni za proizvodnjo denim tkanin, sestavljanje hlač, izdelavo delovnih oblačil, uniform, tehničnih oblačil in drugih aplikacij, ki zahtevajo močne in natančne paralelne šive. Vsebina kompleta Stroj 1 Model: JUKI LH-3188-7 Notranja referenčna številka: 3A-V256 Stroj 2 Model: JUKI LH-3188-7 Letnik: 2004 Notranja referenčna številka: 7A-V257 Stroj 3 Model: JUKI LH-3128-7 Letnik: 1998 Notranja referenčna številka: 37A-5470 Stroj 4 Model: JUKI LH-3178-7 Letnik: 2008 Notranja referenčna številka: 32A-V459 Stroj 5 Model: JUKI LH-3178-7 Letnik: 2002 Notranja referenčna številka: 28A-V249 Stroj 6 Model: JUKI LH-3188-7 Notranja referenčna številka: 47A-K525 Tehnične specifikacije Proizvajalec: JUKI Corporation Serija modelov: LH-3128-7 / LH-3178-7 / LH-3188-7 Vrsta stroja: Industrijski šivalni stroj z dvojnim iglom in sistemom za zaklepni šiv Država proizvodnje: Japonska Sistem za zaklepni šiv z dvojnim iglom Vertikalni sistem rotacije Avtomatsko podmazovanje Integriran elektronski upravljalni sistem (-7 modeli) Avtomatski rezalec niti Avtomatski povratni šiv Avtomatsko pozicioniranje igle Industrijske šivalne mize Robustni jekleni podstavki Proizvodne prednosti • Usklajen proizvodni komplet iz ene tovarne • Visokohitrostno šivanje z dvojnim iglom • Odlična enakomernost šiva • Natančna tvorba paralelnega šiva • Zanesljivo delovanje med neprekinjeno proizvodnjo • Zmanjšane zahteve za usposabljanje operaterjev • Skupen seznam rezervnih delov za celotno proizvodno enoto Zakaj kupiti to serijo • Šest profesionalnih šivalnih strojev JUKI z dvojnim iglom • Usklajeni stroji iz ene tovarne • Skupni postopki vzdrževanja • Skupen seznam rezervnih delov • Stroškovno učinkovito razširitev proizvodne linije • Idealno za nove ali razširjajoče se tovarne oblačil • Odlična naložba za proizvajalce denim in delovnih oblačil Aplikacije • Proizvodnja hlač • Proizvodnja denim tkanin • Dvojni vrsti zaključnih šivov • Šivanje pasu • Pritrditev žepov • Dekorativni zaključni šivi • Proizvodnja delovnih oblačil • Proizvodnja uniform • Tehnična oblačila • Industrijska proizvodnja oblačil Stanje Prej uporabljeno v profesionalni proizvodnji oblačil. Vsi stroji so bili v obratovanju do nedavnega zaprtja tovarne MASI JEANS. Iedpfx Aoznbtloptoif Dobro splošno industrijsko stanje z normalno estetsko obrabo, ki je skladna s tovarniško uporabo. Pred razstavljanjem je na voljo pregled. Lokacija Valga, Estonija Razstavljanje in transport Kupcev je odgovoren za razstavljanje, natovarjanje in transport. Pogoji prodaje Prodaja se "kot je", kjer je, brez garancije. Del likvidacije tovarne MASI JEANS. Stroji so ponujeni predvsem kot en celosten, usklajen proizvodni komplet. Individualna prodaja je morda

Stanje: novo, Diamond grinding wheel Manufacturer: Wendt Shape: 6 A2 Iisdpfxsmxi Tqj Aptsf (28416) Diameter: 125 mm Coating width: 2 x 9 mm Coating thickness: 3 mm Grit size: D 91 for universal grinding Bore: 20 mm Unused, in opened original packaging

Stanje: rabljeno, prevoženi kilometri: 801.000 km, moč: 324 kW (440,52 KM), prva registracija: 08/2014, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, MAN TGX 18.440 4x2 tractor unit, Euro 6, XLX cab with 2 bunk beds, roof/side spoilers, differential lock, automatic transmission, leaf/air suspension, automatic climate control, auxiliary heater, heated seat, sun visor, 2 fuel tanks 580 L/580 L, roof hatch, air horns, refrigerated compartment, radio/CD, electric windows. Iijdjttpv Eepfx Aptof 1st owner Inspection booklet 3 units available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, skupna masa: 8.000 kg, skupna višina: 300 mm, skupna dolžina: 6.000 mm, skupna širina: 2.000 mm, Dolžina: 6000 mm Širina: 2000 mm Višina: 300 mm Število T-utorov: 8 Razmak med T-utori / korak: 250 mm Velikost T-utora: 28 mm Teža na ploščo cca.: 6000 kg Število ustreznih kosov: 1 Dolžina: 6000 mm Širina: 2000 mm Višina: 300 mm Teža: 8000 kg Prosimo, upoštevajte: Informacije na tej strani so zbrane po naših najboljših močeh in, kolikor je mogoče, pridobljene od proizvajalca. Podatki so posredovani v dobri veri, vendar za točnost ne moremo jamčiti. Zato ne predstavljajo pogodbene pogoje ali uradne izjave. Priporočamo, da preverite vse pomembne podrobnosti. Iedpfxexf Exgs Apteif

Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our entire range of vehicles that are immediately and soon available on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * MAX810-neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Gooseneck hydraulically liftable/lowerable as well as removable. Length approx. 3,650 mm * Truck hydraulic connection with flow controller (20 l/min), * incl. gallows for suspension of supply lines, tractor unit (SZM) tank must hold at least 80 l, with MAX Trailer coupling pieces; otherwise, coupling pieces to be provided by the customer ex works. * For tractor units: 6 x 4 or 8 x 4 Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-lug coupling at the front and approx. 500 mm x 8° chamfer at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. Pendulum axle 2-axle front running gear, pendulum axle * All axles are hydromechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-lug coupling front and rear. * Length: approx. 2,970 mm, chassis width: approx. 2,750 mm * BEKA-MAX central lubrication for a 2-axle running gear with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle running gear. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM, PENDULUM AXLE * All axles hydromechanically forced steered. * Hose burst valve on the axle compensation cylinder with automatic reset function. * Hydraulic cylinders with shut-off valves and pre-pin for securing in raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation. TYRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Final coating of the axles * Painted with two coats of single-colour 2-component paint in DB7350 nova grey. * PAINTING Complete steel structure automatically blasted with shot blasting system after welding. * Second blast processing with corundum for optimal adhesion of the coating system. * HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. * PAINTING Trailer carmine red (RAL 3002) Including the following accessories * Gallows with winch for spare wheel at the front of the gooseneck. Iisdpfx Aozbfuhoptjf * 3.5 inch king pin * Steel front wall approx. 400 mm high. * Plug-in ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodized version. * Control lever on the gooseneck protected by a foldable cover. * Lighting of the controls on the gooseneck with on/off switch. * One 7-pin socket left and right rear on the gooseneck for the warning sign. * Load gauge on the gooseneck for axle load determination on the running gear at front and rear * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the low bed with screw couplings. * Access possibility on the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm, emission level: EU Stage V, max. hydraulic pressure: 280 bar, max. flow: 21 l/min, installation on the gooseneck. * Hydraulic oil tank 100 L, frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between powerpack and plug-in plate on the gooseneck. * Radio remote contr

Stanje: rabljeno, 1x Hohner Stapling Head 43/6S, used The Hohner Stapling Head 43/6S is a high-quality narrow stapling head designed for professional wire saddle stitching of brochures and other print products. This used stapling head delivers reliable performance and precision in stapling operations. Key Features: - Versatility: Suitable for the production of brochures, booklets, and other print products that require robust stapling - Compatibility: In addition to Horizon, the Hohner stapling head can also be used in saddle stitchers from various manufacturers such as Duplo or Bourg - Flexible Application: Ideal for processing different paper formats and weights - Easy Handling: Tool-free adjustment for quick adaptation to various stapling requirements - Precise Stapling: Ensures clean and consistent stapling with high quality - Wire Gauge: Compatible with wire diameters from 0.4 to 0.6 mm, enabling a wide range of stapling projects - The "S" in the model designation stands for "narrow" and indicates a more compact design Iiedpfxsw Ewyxj Aptjf Technical Specifications: - Staples: Designed for standard staples - Maximum Stapling Capacity: Up to 5 mm - Paper Weight: Suitable for paper weights from 60 to 300 gsm - Dimensions: Compact design for integration into existing systems All-in-One Service Package We take care of everything: from secure packaging and transport to customs clearance. Upon request, we can also provide you with a customized leasing offer. Sustainable and Economical Opt for a used machine and enjoy double the benefits: protect the environment and reduce costs. Despite possible signs of use, you receive a quality product at an attractive price.

Stanje: rabljeno, 1 Hohner Stitching Head 43/6S, used The Hohner 43/6S stitching head is a high-quality narrow stitching head designed for professional wire saddle stitching of brochures and other printed materials. This used stitching head delivers reliable performance and precise staple closure. Key Features: - Versatility: Suitable for producing brochures, booklets, and other print products requiring stable stitching - Compatibility: In addition to Horizon, the stitch head can also be used in saddle stitchers from various manufacturers such as Duplo or Bourg - Flexible usage: Ideal for processing a range of paper formats and weights - Easy handling: Tool-free adjustment for quick adaptation to various stitching requirements - Precise stapling: Ensures clean and uniform stitching with high quality - Wire thickness: Compatible with wire thicknesses from 0.4 to 0.6 mm, enabling a wide range of stitching projects Iiodpfew Ew Agsx Aptsf - The "S" in the model designation stands for "schmal" (narrow), indicating a more compact design Technical Specifications: - Staples: Designed for use with standard staples - Maximum stitching thickness: Up to 5 mm - Paper weight: Suitable for paper weights from 60 to 300 gsm - Dimensions: Compact construction for integration into existing systems

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding Iedpfxjuxfu No Apteif - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Iiodpfxjzahp Se Aptof Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: rabljeno, Leto izdelave: 2007, The Heidelberg Stahlfolder TH 82/6-4-2 RFH, year of manufacture 2007, is a high-quality folding machine with a fold diameter of 820 mm. The machine is currently dismantled and located in Germany. It is equipped with a RFH-82 rotary feeder. The configuration comprises three stations: the first station is fitted with six fold pockets (82 cm) with automatic pocket adjustment; the second station offers four fold pockets (66 cm) with automatic pocket adjustment; and the third station includes two fold pockets (56 cm), also with automatic pocket adjustment. Additionally, the machine features an SBP 66 stack delivery, a touchscreen monitor, and an MCT control system. The specific model designation is TH82/6/4/2 with machine number O-00951. Format: 820 mm Equipment: - Rotary feeder RFH-82 Iiedpfswnft Sjx Aptef - 1st station: 6 folding pockets, 82 cm, automatic pocket adjustment - 2nd station: 4 folding pockets, 66 cm, automatic pocket adjustment - 3rd station: 2 folding pockets, 56 cm, automatic pocket adjustment - Stack delivery SBP-46 + MKE + VE - Touchscreen monitor, MCT control system

Stanje: novo, Nosilnost regala: 18.000 kg Nosilnost na posamezno raven: 3.000 kg Isdpfsfgyg Hjx Aptoif Število ravni za nalaganje: 6 kos Priporočena dolžina materiala: 6.000 mm Razdalja med stojali: 2 x 2.000 mm Višina regala: 2.440 mm Najprimernejša rešitev za skladiščenje dolgih materialov s 3 stebri. - Vsaka polica se lahko zasuče navzven, kar vedno omogoča nakladanje in razkladanje z mostnim dvigalom. - Enostranska izvedba.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, številka stroja/vozila: RS 110-6-2 TF, Funkcionalnost: popolnoma funkcionalen, filtrirna površina: 660 m², skupna višina: 10.400 mm, skupna dolžina: 9.200 mm, skupna širina: 2.500 mm, skupna masa: 9.000 kg, Oprema: dokumentacija / priročnik, Industrial Extraction System Venti Oelde, Spülluftfilter RS 110-6-2 TF, High-Performance System Airflow approx. 87,500 m³/h, 660 m² filter area, year of manufacture 1997, incl. 3 high-capacity fans, incl. ductwork, incl. air recirculation system for approx. 70,000 m³/h, excl. spark extinguishing system. For sale is a powerful industrial extraction system from Venti Oelde, designed for an airflow of approx. 87,500 m³/h. The system comes from ongoing production and is intended for use in larger industrial applications (e.g. woodworking, furniture industry, operations with high chip and dust volumes). 👉 This is a complete central extraction system, not a standalone unit! Key Technical Data (excerpt) - Airflow: approx. 87,500 m³/h - Design: central extraction system - Year of manufacture: approx. 1997 - Area of application: industry / continuous operation - robust steel construction - designed for heavy-duty continuous use Scope of Delivery - filter unit - fans - ductwork - air recirculation system - steel framework / support structure Isdpfx Apsywflajtjif Condition - System was in operation until recently - age-related used condition, but solid industrial construction - Inspection expressly encouraged Special Features - Very high air output – ideal for larger production facilities - Immediately available – no long lead times as with new systems - Massive construction – durable industrial technology - Attractive alternative to expensive new investment - Dismantling assistance can be organized for an additional fee!!!! The offered machine is sold as a used system. Sale takes place under exclusion of any and all liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller does not provide any guarantee for functionality, performance, or fitness for a particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or from intentional or grossly negligent conduct of the seller. Dismantling and Transport Dismantling of the system is to be carried out by the buyer at their own risk and expense. The buyer bears all costs and risks associated with dismantling, loading, and transportation. Transfer of Risk Risk passes to the buyer at the latest upon commencement of dismantling or loading. Other No liability is accepted for hidden defects. All information regarding the system (e.g. year of manufacture, operating hours, technical data) is provided to the best of our knowledge but without guarantee.

Stanje: rabljeno, prevoženi kilometri: 1.015.000 km, moč: 340 kW (462,27 KM), prva registracija: 04/2016, vrsta goriva: dizel, skupna masa: 19.500 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2016, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Dodatne informacije: * Nosilnost: 11108 kg * Višina: 3900 mm * Širina: 2550 mm * Dolžina: 6160 mm * Tip | Prva os: Goodyear R * Velikost pnevmatik | Prva os: 385/65 R22.5 * Globina profila notranje levo | Prva os: 30 % * Globina profila notranje desno | Prva os: 30 % * Največja osna obremenitev | Prva os: 8000 kg * Tip | Druga os: Goodyear R * Velikost pnevmatik | Druga os: 315/70 R22.5 * Globina profila zunanje levo | Druga os: 30 % * Globina profila notranje levo | Druga os: 30 % * Globina profila zunanje desno | Druga os: 30 % * Globina profila notranje desno | Druga os: 30 % * Največja osna obremenitev | Druga os: 11500 kg * Medosna razdalja: 380 cm * Kabina: Da * Položaj | Prva os: Spredaj * Znamka | Prva os: Druga * Vrsta zavor | Prva os: Kolutne zavore * Vzmetenje | Prva os: Parabolične vzmeti * Krmiljena | Prva os: Da * Položaj | Druga os: Zadaj * Znamka | Druga os: Druga * Vrsta zavor | Druga os: Kolutne zavore * Vzmetenje | Druga os: Zračno vzmetenje * Redukcija | Druga os: Enostavna redukcija * Dvojna kolesa | Druga os: Da * Pogonska | Druga os: Da * Diferencialna zapora | Druga os: Da Dodatna oprema: * Adaptivni tempomat * Aluminijast rezervoar goriva * Protisistem blokiranja (ABS) * Sistem proti zdrsu pogonskih koles (ASR) * Samodejna klimatska naprava * Strešni usmernik zraka * Diferencialna zapora * Dvojni rezervoar goriva * Električna okna * Električno nastavljiva zunanja ogledala * Elektronski zavorni sistem (EBS) * Elektronski program stabilnosti (ESP) * Klimatska naprava * Hladilnik * Zračno vzmetenje * Meglenke * Parabolično vzmetenje * Filter za delce * Radio/CD predvajalnik * Kolutne zavore Iodpfszbf Stox Aptoif * Stranska zaščita * Stranski usmerniki zraka * Spojler * Grelna naprava v mirovanju Semtrade B.V. Kontakt | Martin Klaaijsen | Tel: | Whatsapp: | Email: Stroški izvoza | Prosimo, da se predhodno pozanimate o stroških in postopkih v vaši državi Lokacija | Maasdijk (NL) | 140 km od meje | 20 km od letališča Rotterdam The Hague Izjava o odgovornosti: Pridržujemo si pravico do sprememb, prodaje ali napak.

Stanje: rabljeno, prevoženi kilometri: 876.174 km, moč: 340 kW (462,27 KM), prva registracija: 03/2015, vrsta goriva: dizel, velikost pnevmatike: 385/65, stanje pnevmatik: 30 odstotek, konfiguracija osi: 4x2, medosna razdalja: 3.800 mm, gorivo: dizel, barva: drugo, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 16, emisijski razred: Euro 6, skupna dolžina: 6.160 mm, skupna širina: 2.550 mm, Leto izdelave: 2015, Oprema: ABS, drugi rezervoar za gorivo, električno nastavljivo ogledalo, električno upravljanje oken, = Dodatne možnosti in oprema = - Radio CD-predvajalnik - Spalna kabina = Dodatne informacije = Splošne informacije Število vrat: 2 Registrska številka: 78-BFR-1 Iiedpfxjy Uh Das Aptef Tehnične informacije Število valjev: 6 Prostornina motorja: 12.902 cc Največja dovoljena masa: 19.500 kg Največja vlečna masa: 50.000 kg Konfiguracija osi Profil pnevmatik: 30 % Velikost prednjih pnevmatik: 385/65 Velikost zadnjih pnevmatik: 315/70 Notranjost Število sedežev: 2

Stanje: rabljeno, Champagne capsule applicator and folder Zenith 2/6 Ottico No. 13/80MO-1089123/1989 Capsule type: Champagne capsule folder Iiedpfxsxytrkj Aptsf Output per hour: 3,000 Direction of operation: left to right Operating mode: fully automatic Dimensions L x W x H [m]: 2.50 Number of heads: 3

Stanje: rabljeno, Direction of travel: left-right Ijdpfsxytvcsx Apteif Number of heads: 6

Stanje: rabljeno, Drive power 7.5 kW Isdpfx Aovt Efasptjif Voltage 260 V Current 32 A Machine weight approx. 120 kg DC motor Type: MO30/43/2 S/N Speed n = 3,000 rpm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 55062012, Funkcionalnost: popolnoma funkcionalen, sesalna zmogljivost: 80.000 m³/h, filtrirna površina: 577 m², lastna masa: 9.900 kg, Oprema: CE označba, TEHNIČNE PODROBNOSTI Iedpfoxcnthox Aptsif Kapaciteta: 80.000 m³/h Filtracijska površina: 577 m² PODROBNOSTI STROJA Lastna teža: 9.900 kg Transportni paketi: 1 OPREMA Odsesavanje Protipožarni sistem Obstoječa električna omarica Sistem stresanja filtrov CE označba prisotna

Stanje: dober (rabljeno), prevoženi kilometri: 1.025.219 km, moč: 368 kW (500,34 KM), prva registracija: 01/2018, vrsta goriva: dizel, konfiguracija osi: 4x2, gorivo: dizel, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2018, Oprema: AdBlue, Bluetooth, EBS (Elektronski zavorni sistem), drugi rezervoar za gorivo, električno upravljanje oken, filter saj, greljenje sedeža, klimatska naprava, meglenke, navigacijski sistem, spojler, tempomat, = Additional Options and Accessories = - Aluminum fuel tank - Bluetooth Isdpsywak Dsfx Aptoif - Roof spoiler - Low noise - Alloy wheels - Particulate filter - Radio/CD player - Sliding roof - Sleeper cab - Side door - Heated seats - Toolbox - Xenon lighting = Additional Information = Suspension: Air suspension Front axle: Steering Unladen weight: 7,911 kg Payload: 13,089 kg Gross vehicle weight (GVW): 21,000 kg APK (Technical Inspection): valid until 03/2027 Technical condition: good Visual condition: good Reference number: 76 Vehicle number: 76 MAN 18.500 TGX / XXL / 2 x Tank / Full Air Suspension / Euro 6 VIN: WMA10XZZ1JB100733 Transmission: Automatic Suspension: Air / Air (Full Air Suspension) Air conditioning Engine brake Cruise control Refrigerator Auxiliary heater Distance assist Lane departure warning assist Emission standard EURO 6 2 x fuel tanks No liability for printing and typographical errors, subject to change, prior sale, and mistakes! = Company Information = No liability for printing and typographical errors, subject to change, prior sale, and mistakes! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Mrs. Sabine Faust Email:

Stanje: novo, Load capacity, rack: 6600 kg Load capacity per level: 1100 kg Number of storage levels: 6 pcs. Recommended material length: 6000 mm Column spacing: 2 x 2000 mm Rack height: 2440 mm Compartment width: 800 mm The optimal solution for storing long materials with 3 uprights/columns. Iiedpfx Apjfgyhistsf - Each compartment can be swung outwards, allowing for easy loading and unloading with an overhead crane at any time. - Single-sided design. - Compartment depth: 800 mm

Stanje: novo, Shelf load capacity: 36,000 kg Load capacity per level: 3,000 kg Number of storage levels: 2 x 6 pcs. Recommended material length: 6,000 mm Frame distance: 2,000 mm Rack height: 2,440 mm Iiedpfxefgyhce Aptef Compartment width: 500 mm Dimensions (L x W x H): 4.8 x 2.55 x 2.5 m The most suitable solution for storing long materials with 3 uprights. - Each compartment can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Double-sided design.

Stanje: dober (rabljeno), Kuka KR 6 industrijski robot KRC 2 ED 05 KCP 2 Robot Iiedsxt Hb Ejpfx Aptef

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Hardinge Talent 6/45 2-osni CNC stružni center (2007) Siemens 810D krmiljenje (CCU3) Glavni motor 11 kW Revolver z držali VDI30 Hitrosti vretena do 6000 vrt/min Maks. dolžina struženja 381 mm Maks. premer struženja 284 mm Maks. premer nad posteljo 457 mm Hod osi X 228 mm Hod osi Z 406 mm Isdpfjyvqdfsx Aptjif Teža: 2800 kg *Naprodaj pri podjetju Jet Machinery Ltd* Skladiščna številka Jet Machinery: #79161 Serijska številka stroja: BLAA7E0070 Cena: £13,950.00 + DDV Čeprav se trudimo zagotoviti, da so zgornji podatki natančni, njihova točnost ni zagotovljena. Priporočamo, da si potencialni kupci preverijo vse ključne podatke. Zakon o zdravju in varnosti pri delu 1974: Kot dobavitelj ju ne moremo v celoti zagotoviti, da oprema za vašo uporabo izpolnjuje vse zahteve zakona glede zaščitnih naprav itd. Priporočamo, da opremo pred uporabo pregleda ustrezen strokovnjak za zaščitne naprave.

Stanje: rabljeno, Leto izdelave: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Engineered for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-solid products. Ijdpfxsywuczs Aptsif Featuring advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while maintaining strict hygiene and food safety standards. The machine is equipped with user-friendly controls, allowing operators to easily adjust fill volumes and production speeds to accommodate different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-solid products - Hygienic stainless steel construction - User-friendly control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact, space-saving design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Masterfill S500 6-head filler, while Rise Filler M2-AF serial number 4716 Year of manufacture: 2006 Filling capacity: 2 ml to 2000 ml The filler is a 6-head automatic filler with the ability to store 50 separate preset menus. Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars are fed on a constant stainless-steel rail conveyor • Jars are automatically indexed in feed and discharge via pneumatic gates • Jars are filled by positive pressure from a 50-litre holding tank (this could easily be changed to a constant positive pressure in the manifold via a modulated pump) • Volume control via Nixon BNO turbine flowmeter with communication to Siemens high-speed counter • Liquid is filled into the jar at rise or above the jar for fill time • Complete SIP, CIP, and programmable rinsing functions available Dico Capper Serial Number 3/379 Brief FDS • Capper with rotating starwheel • Caps square or round jars/bottles (spare parts included) • Jar enters, PEC signal turns the starwheel 90⁰ under the capping head • Cap lowers into the groove and retracts in the groove • Jar/bottle retainer activated by adjustable cam on 5/2-valve • Starwheel turns 90⁰ to discharge conveyor • Current capping head removable, for 40 mm closures (no alternative head) • All systems operated by cams and relays, no PI • Motor runs continuously for capping (clutch set and var. speed gear) • Cam motor uses frequency inverter. Safety guards with interlocked access doors Required Services • 3-phase 32-amp power supply • 7 bar compressed air Main Control Panel Closure sorter and feeder RNASRC-N 400-2L Serial Number 00801 Brief FDS • 40 mm closure sorter and feeder...

Stanje: rabljeno, številka stroja/vozila: IC1369, Leto izdelave: 2016, obratovalne ure: 3.096 h, nosilnost: 3.000 kg, dvižna višina: 4.700 mm, težišče tovora: 500 mm, vrsta goriva: plin, tip droga: triplex, gradbena višina: 2.194 mm, 5216803 Iisdpozirt Sofx Aptof Serijska številka: FN530570