Haeusler Evo 31031 4-Walzen Blechbiegemaschine nakup rabljenega (61.227)

Stanje: zelo dobro (rabljeno), AUMA SAR 07.5-F10 + ADOR 63-4/80 Hnsdpfezagi Dex Abnjr

Stanje: zelo dobro (rabljeno), Cena podana za 1 kos. Profesionalni digitalni osciloskop LeCroy 9354AL namenjen je za napredne merenje i dijagnostiku elektronskih kola. Uređaj je opremljen sa 4 merenja kanala, širinom pojasa od 500 MHz i visokom frekvencijom uzorkovanja, te nalazi primenu u istraživačkim laboratorijama, servisima elektronike, industrijskoj automatizaciji i R&D odeljenjima. Tehnički podaci: • Proizvođač: LeCroy • Model: 9354AL • Tip: digitalni osciloskop • Pojas: 500 MHz • 4 merenja kanala • Uzorkovanje do 2 GS/s • Memorija akvizicije do 8 Mpts Hnodszaf Skepfx Abner • BNC ulazi • Ugrađeni CRT ekran Stanje: Korišćen uređaj, ispravan. Osciloskop se ispravno pokreće i prikazuje talasne oblike. Vidljivi normalni tragovi upotrebe koji proizilaze iz eksploatacije i skladištenja. Napomena: Jedan od plastičnih delova kućišta sa zadnje strane ima naprsnuće. Oštećenje je isključivo kozmetičke prirode i ne utiče na funkcionalnost niti radne karakteristike uređaja.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Ponujamo zelo dobro robno lepilko Format-4 tempora F600, letnik 2023. Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite. Hsdozak D Sjpfx Abnonr Dober dan, prodamo robno lepilko Format4 Tempora F600 PUR + Eva. Stroj iz leta 2023, nalepljeno približno 60 km robnih trakov. Opremljena z glue boxom za lepljenje s PUR tehnologijo. Poleg tega 2x posodica za hitro menjavo barve PUR/EVA lepila. Več informacij na povezavi:

Stanje: rabljeno, prevoženi kilometri: 433.626 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, prva registracija: 02/2013, naslednji pregled (TÜV): 12/2025, emisijski razred: Euro 5, barva: bela, število sedežev: 14, Oprema: ABS, klimatska naprava, parkirni grelec, * Our internal no.: 1089 * MB Sprinter 516 * Type: City 35 * EVOBUS – ORIGINAL * 2 x air conditioning units * First registration: EURO 5 * New engine installed in 06/2021 at 341,638 km (current engine mileage: 91,988 km), repair invoice for €12,457.63 is available * Additional heater / auxiliary heating * Driver’s seat heating * Gorba destination display with CU5 controller * TFT monitor pre-installation * Convector heating * Seats with 3-point belts * 13 seats + 1 wheelchair space * 9 standing places * Mechanical folding ramp,... * The customer is obliged to independently inspect and verify the condition and equipment of the goods/vehicle! * etc. Hnsdewnlhpepfx Abnsr * Vehicle may still be in use / mileage and condition may differ * All information provided without guarantee * We reserve the right to prior sale * Our terms and conditions apply

Stanje: rabljeno, prevoženi kilometri: 579.278 km, moč: 120 kW (163,15 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, prva registracija: 11/2017, emisijski razred: Euro 6, barva: bela, število sedežev: 15, Oprema: ABS, klimatska naprava, * Our internal ref.: 1090 * MB Sprinter 516 * Type: City 35 * EVOBUS - ORIGINAL * 2 x air conditioning units * First registered 11/2017 – EURO 6 * New engine installed in 05/2024 at 534,162 km (current engine: 45,116 km), repair invoice amounting to approx. €15,000 available * Complete automatic transmission overhaul including new torque converter in 07/2024 * Vehicle has dent/damage * Auxiliary heater / stationary heating * Driver’s seat heating * LAWO destination display with SicmaControl control unit * TFT monitor pre-installation * Convector heating * Seats with 3-point seat belts Hjdpjwnlhvsfx Abnenr * 11 seats * 12 standing places including 4 folding emergency seats or 1 wheelchair space & 2 folding emergency seats * Manual folding ramp, ... * The customer is obliged to independently inspect the condition and equipment of the goods/vehicle! * etc. * All information is provided without guarantee * Subject to prior sale * Please refer to our terms and conditions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, 1. Weishaupt plinski gorilnik WM-G10 / 4-A. Z plinsko progo Dungs DN 50. Izvedba: ZM Leto izdelave: 2011 Moč: 110 - 1250 kW. Priključni tlak: 15-500 mbar. 2. Weishaupt plinski gorilnik WM-G10 / 4-A. Z plinsko progo Dungs DN 50. Izvedba: ZM Hsdpfx Abozaa Uasnonr Leto izdelave: 2005 Moč: 120 - 1250 kW. Priključni tlak: 15-500 mbar.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 39.900 km, moč: 184 kW (250,17 KM), prva registracija: 12/2024, vrsta goriva: dizel, konfiguracija osi: 4x2, medosna razdalja: 5.300 mm, gorivo: dizel, zavore: zaviranje z motorjem, barva: bela, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, število prestav: 8, emisijski razred: Euro 6, skupna dolžina: 9.340 mm, skupna širina: 2.550 mm, skupna višina: 3.560 mm, dovoljena osna obremenitev (os 1): 5.800 kg, dovoljena osna obremenitev (os 2): 9.440 kg, dolžina tovornega prostora: 72.000 mm, širina tovornega prostora: 24.800 mm, višina nakladalnega prostora: 24.000 mm, Leto izdelave: 2024, Oprema: centralno zaklepanje, dvižna zadnja plošča, električno nastavljivo ogledalo, električno upravljanje oken, klimatska naprava, meglenke, tempomat, = Dodatne možnosti in dodatna oprema = - Ojačevalnik zavor - Strešno okno - Euro 6 - Daljinsko upravljanje centralnega zaklepanja - Sistem za nadzor hitrosti - Volan, nastavljiv po višini - LED-luči za vožnjo podnevi - Volan, oblazinjen z usnj - Zračno vzmetenje - Naslon za roko spredaj - Radio DAB MP3 Bluetooth 4.0 - Kolutne zavore - Kabina za spanje - Stranska vrata - Zaščita pred soncem = Dodatne informacije = Splošne informacije Hjdpfx Abezkaqnonjnr Kabina: GLOBAL 1 BED Registrska številka: 05-BZK-1 Tehnične informacije Število cilindrov: 6 Prostornina motorja: 7.698 cm³ Menjalnik: OPTITRONIC 6AS, 8 stopenj, avtomatski Največja obremenitev prednje osi: 5800 kg Največja obremenitev zadnje osi: 9440 kg Mase Lastna teža: 7.512 kg Nosilnost: 6.788 kg Največja dovoljena masa: 14.300 kg Funkcionalnost Nakladalna ploščad: D'HOLLANDIA DH-LM, zadnja vrata, 1500 kg Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): veljaven do 12.2026 Tehnično stanje: zelo dobro Optično stanje: zelo dobro

Leto izdelave: 1980, stanje: rabljeno, Orodje za ostrenje VOLLMER FINZ 4-800 Lokacija: Gorzów Wielkopolski. Pogoji dostave: Hodpfx Aocw Dg Debnjnr Osobni prevzem Stroški dostave: Kupec krije stroške Način zagona: Po dogovoru Opis: Opombe: AVTOMATSKI STROJ ZA BRUŠENJE HIDRAVLIČNO PODPRTIH KROŽNIH PLOŠČ WIDIA

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation Hnjdpfx Absfdkb Tensr - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. Hjdpfx Asd Tbbdsbnsnr The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level. Hjdpfx Abed Tqalsnonr

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. Hnjdpsfdkb Uefx Abnsr According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Hodpfjguk A Hox Abnsnr - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Hsdpfx Aeguk Dkobnjnr Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Hnsdpfx Abofdkbhsner - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Hnodpoguk Dvsfx Abnsr - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1971, Prodam to štirivaljno krožno stiskalnico tipa VRM HY 3000/18 Priključena, možen preizkus Teža 24.000 kg Hsdpexwqdrefx Abnonr

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Leto izdelave: 1963, številka stroja/vozila: 971W01002, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, število valjev: 3, premer zgornjega valja: 400 mm, premer stranskega valja: 400 mm, dolžina valja: 3.000 mm, najv. debelina pločevine: 15 mm, Prodaja se rabljeni valjčni stroj HAEUSLER KRMA 3000 x 15. Proizvajalec: CHR. HAEUSLER AG, Švica. Delovna širina 3000 mm, nazivna debelina 15 mm, 380 V. Serijska številka 971W01002. Na tablici je navedeno leto 1963, kot tudi revizija/CE oznaka 2003. Stroj je namenjen za valjanje in upogibanje pločevine. Prodaja se v obstoječem stanju, ogled na kraju je priporočljiv. Stroj je opremljen tudi za upogibanje profilov. Hnsdpfjzil Hfjx Abnjr

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE ///// Hodowg R I Eepfx Abnjnr

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) Hsdsyzulwspfx Abnsnr ⚙️ Uporaba: industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), Naprodaj električni motor podjetja Kaltenbach Maschinenfabrik Cena velja za 1 kos Stanje: uporabljen, delujoč Motor preverjen s testerjem Vidne običajne sledi uporabe in skladiščenja Tehnični podatki: Proizvajalec: Kaltenbach Maschinenfabrik Tip: DKV 112M 238 4 Trifazni motor Hnedpjyv Uvxefx Abnor Moč: 1,7 / 2,6 kW Napetost: 400 V, 50 Hz Zaščita: IP54 Izolacijski razred: F Število vrtljajev: 700 / 1415 obr/min Dahlander večhitrostni motor Premer gredi približno 28 mm

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, delujoče Proizvajalec: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Opis stroja: Na prodaj profesionalni lepilni agregat HOT-MELT BÜHNEN / MELER 6050, namenjen industrijskemu nanašanju lepila. Visokokakovostna naprava – evropska proizvodnja, uporablja se v: pakiranju pohištveni industriji lesnopredelovalni industriji proizvodnih linijah ⚙️ Tehnični podatki (iz tablice): Napajanje: 230V / 50-60 Hz 400V (3-fazno) Moč: do 4,7 kW Maks. temperatura: 200°C Maks. tlak: do 160 bar Izhodi: 2 Model: HB 6050-2 NI120 📦 Komplet vključuje: ✔️ Lepilni agregat BÜHNEN / MELER Hnjdpfx Aey Aam Nebnjr ✔️ 4 grelne cevi (celoten komplet!) ✔️ Kable in priključke, vidne na fotografijah 🔍 Stanje: predmet rabljen normalni znaki uporabe v dobrem tehničnem stanju notranjost rezervoarja vidna na slikah prodaja se natančno kot na fotografijah

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: Hnedpfxoy Aagij Abner ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131 CNC Machining Centre FORMAT-4 profit H10 22.43 Used, year of manufacture 2017 Operating hours approx. 1800 h Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300 CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data: Phenolic resin matrix table system Grid table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control console Handheld terminal for remote axis control Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24,000 rpm Central extraction via combined connections (D=250mm) Software: Woodflash German (H20/H08/H10/H50) Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Feeding Unit FORMAT-4 L-Motion Technical Data: Hodpfxorrh T Ao Abnenr Year of manufacture 2017 2-axis version with 4 storage positions for loading an H10 with lifting table CNC loading Gentle transport Fully automatic panel handling Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3 Stack height 1800 mm Extraction System FELDER RL 300 Technical Data: Year of manufacture 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar at 40 NL/min Operating pressure in the unit 6 bar Chip container volume 500 l Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation Errors in description and price reserved Dismantling and loading by us is available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as seen Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: rabljeno, prevoženi kilometri: 402.000 km, prva registracija: 11/2015, konfiguracija osi: 2 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2015, Oprema: ABS, klimatska naprava, parkirni grelec, pogon na vsa štiri kolesa,