Enota Za Laminarni Tok nakup rabljenega (87.488)

Stanje: potreben popravila (rabljeno), Leto izdelave: 2008, obratovalne ure: 4.000 h, Funkcionalnost: omejena funkcionalnost, Stroj za peskanje plošč in europrofilov. Delovna širina: 2,6 m, delovna višina: 0,5 m. Dovodni in izhodni motorizirani valji po 12 m. Stroj je v delujočem stanju, vendar potrebuje strokovnjaka za določene obnove. Že izvedene obnove: - nov motor za odsesovalni ventilator - nova rezila turbine - zaščitne plošče v notranjosti skoraj kot nove - nov jermenski trak dvigala - nova sklopka med eno turbino in motorjem Potrebna popravila: - elektro omara (stroj že deluje z novim krmilnim sistemom, stara krmilna plošča ni nastavljena in ni funkcionalna) - popravilo krtače (obstaja, a je v okvari – trenutno je ne uporabljamo) Iasdpevgbcusfx Alaot - električne povezave in senzorji (nekateri so vgrajeni, vendar se jih ne uporablja)

Stanje: pripravljen za uporabo (rabljen), Lakirni agregat Wagner Črpalka za barvo/lak MODEL T.371 Iaodpfx Aleyaqpbjaet

Stanje: rabljeno, Ferwood Code: RU0011365 - Manufacturer Code: 0000506990B - Condition: Used - Compatible Machine: SQUADRABORDA SCM/STEFANI - If interested, we offer refurbishment services; please contact us. Iedpfsva Avcjx Alaeat

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm Iaodpfx Aljxdm Aweaot - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Stanje: novo, Control panel for BT-2 / BT-12 drilling machines Iaedocwgauopfx Alaot Further spare parts for these machines available on request!

Stanje: novo, Leto izdelave: 2026, Oprema: dokumentacija / priročnik, Laser welding machine with 3 kW laser power, laser components from Siemens. The welding machine comes with genuine CE certification, including a German manual, risk analysis, and all necessary documentation required for operating a laser welding system in Germany. The wire feeder case, also with genuine CE certification, is included in the scope of delivery. Training can be provided on-site at our company. Isdpfx Aen Sl D Rjlaeat

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 54 kW Cooling capacity: up to 300 kW Medium: Water up to 200°C Maximum external volume: 43 l at 200°C Max. flow rate: up to 230 l/min Max. delivery pressure: up to 8.3 bar Motor power: up to 3 kW Dimensions (LxWxH): 1,460 x 525 x 1,200 mm Weight: approx. 330 kg Heat transfer medium connection: Flange DN40 (DIN EN 1092-1), Form B1 *FEATURE HIGHLIGHTS: - Smart controller (7" touch display) for regulation and control - Heating control via solid-state relays - Control cabinet IP54, externally ventilated - Expansion vessel, heater, and piping made of stainless steel - Heating via stainless steel tubular heater made of Incolloy - Dirt trap (circulation) - Unit ready for connection and mounted on castors, 2 of which are steerable and equipped with brakes - Cooling and filling controlled via solenoid valve - Configurable automatic filling via potable water supply or separate connection (factory setting: via cooling water supply) - Flow measurement by differential pressure principle - Level monitoring via magnetic float switch - Automatic temperature-dependent system shut-off (except for WP7-90) - Flow monitoring by flow detection - Bypass between flow and return with reduced cross-section - Dirt filters in cooling water supply, filling, and return line of the circulation system - Continuous bypass of heat exchanger via 3-way motorized control valve (WP7-180/200) - System pressure monitoring using pressure transmitter in the expansion vessel (WP7-150/180/200) - Booster pump for system filling (WP7-180/200, optional for others) - Safety temperature limiter (STL) in heater and supply line (WP7-200) - Manometer in supply line at rear side of the unit - Circulation circuit thermally insulated (WP7-150/180/200) Iodpfxjg Ey T Eo Alajat Visit our website for more details or for other performance classes. *This device is compliant with European Directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) - Unit mounted on castors and ready for connection *OPTIONS: Iasdpfx Aeg Ey Ufslaot - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification:* Device type: 6/95 Heating capacity: 6 kW Cooling capacity: 45 kW Medium: Water up to 95°C Maximum external volume: 50 l at 95°C *Hydraulic Features:* - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water or manual filling (option) - Level monitoring via magnetic float switch - Dirt filter in the return line of circulation and cooling water inlet - Reversal circuit for leak-stop operation - Manual tool draining via leak-stop operation and activation of a vent valve on the rear of the unit - Filling time monitoring and aqua timer - Adjustable pump overrun - Adjustable temperature alarm - Options: filling nozzle, interface cable, mechanical flow meters *Electrical Features:* - Control unit SBCmini, with relay for collective alarm, 230V, connection on the rear of the controller - Heating control SSR - Control cabinet IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A *General Features:* - Corrosion-resistant components (stainless steel, brass) - Heating via stainless steel tubular heating element made of Incolloy - Device mounted on castors, two of which are pivoting with brake - Additional temperature safety for secure shutdown of the heater on heater circuit breaker *Cooling:* Capacity: 45 kW (stainless steel plate heat exchanger) Cooling water connection: socket G3/8" internal thread (Performance data based on 80°C supply and 15°C cooling water temperature, as well as a pressure difference between cooling water inlet and outlet of 3 bar) *Pump:* Type: T401 Flow rate (max): 40 l/min Flow pressure (max): 3.8 bar Motor power: 0.5 kW Design: Submersible pump / Peripheral impeller *Dimensions/Weights/Colors:* Dimensions L/W/H: 514 mm x 238 mm x 493 mm (without connections) Weight: approx. 30 kg Iasdpfxefnvvij Alaet Color: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections:* Circulating medium: socket G1/2" Cooling water: socket G3/8" Filling (option) *This device is compliant with European directives. Other directives and standards are only considered fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard are indicated in offers or order confirmations.*

Stanje: novo, *Technical Standard Specification: Heater output: 9 kW Cooling capacity: 50 kW Medium: water up to 160°C Maximum external volume: 16 liters at 160°C Iaodpfsftm Hrox Alaet Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg HIGHLIGHTS / FEATURES: • Smart Controller Plus 7" touch screen / Industry 4.0 compatible • Flow measurement, configurable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-Sub connector 20mA/TTY • Connection for external PT100 temperature sensor for measuring and displaying tool temperature • Continuous bypass of heat exchanger via 3-way valve to reduce deposits in heat exchangers • High-performance pump, hydraulic components in stainless steel (VA), magnetically coupled • Tool draining via suction • Booster pump for unit filling at high temperatures • Filling via cooling water, switchable to separate filling • SSR for heating control • IP54 splash protection Visit our website for more details or for other performance classes. *This unit complies with European directives. Other directives and standards are only fulfilled if listed in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from standard will be stated in the quotation or order confirmation.

Stanje: novo, *TECHNICAL SPECIFICATIONS: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions LxWxH: 1,414 x 503 x 1,350 mm (without connections for continuous bypass) Weight: approx. 225–320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS: -Control and monitoring unit: Smart Controller (7" touch display) -Heating control via solid-state relay -Control cabinet IP54 -Cooling managed via solenoid valve -Flow measurement using differential pressure principle -Bypass between supply and return with reduced cross-section -Level monitoring via magnetic float switch -Flow monitoring by measuring heating element surface temperature and flow rate -Dirt filter in cooling water supply and in the return of the circulation system -Feed temperature monitoring via electronic safety temperature limiter -External oil filling port -Dilo screw fittings on internal piping connections (except pump connections) -At 350°C: continuous bypass, including bellows valves -Connection for nitrogen blanket with manometer and safety valve 0.5 bar at 350°C (optional) Visit our website for more details or for other performance classes. Iajdjg Ey Rfepfx Alaet *The unit complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *Technical Standard Specification: Device type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C supply temperature, 15°C cooling water temperature, and a pressure differential between cooling water inlet and outlet of at least 2 bar) Medium: Water up to 150°C Maximum external volume: 9 liters at 150°C *Functional Equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return line of circulation and cooling water inlet - Reversing circuit for leak-stop operation (operable up to system shut-off temperature) - Ball valves in supply and return - Automatic temperature-dependent system shut-off Iaodpfxsfnvwqe Alaet - Fill duration monitoring and aqua timer - Adjustable pump run-on - Adjustable temperature alarm - Options: interface cable - Control unit SBCmini with relay for collective alarm, 230V, at the rear of the controller on terminal - Heating control SSR - Switch cabinet IP54 - Interface 20mA TTY; Arburg pin assignment - Cekon plug 16A - Corrosion-resistant components (stainless steel, brass) - Device mounted on castors, two of which are steerable with brake - Additional temperature safety device for secure shutdown of the heater on heating contactor - Bypass between supply and return with reduced cross-section *Pump: Type: Y2051 Flow rate (max) 27 l/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Design: submersible pump / peripheral impeller *Dimensions / Weights / Colours Dimensions (L/W/H): 600 mm x 240 mm x 493 mm (excl. connections) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey, Front door: RAL 5015 sky blue *Connections: Circulation medium: socket G1/2" Cooling water: socket G3/8" *This device is compliant with European directives. Other guidelines and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in quotations or order confirmations.

Stanje: novo, *Technical Specifications: - Air-cooled, 25.5 kW based on +10°C supply temperature at an ambient temperature of +32°C - Supply temperature range: +5°C to +30°C (Optionally, lower temperatures down to -5°C possible) - Air flow rate: 8,000 m³/h - Max. air inlet temperature: +30°C - Optional heating capacity up to 24 kW *Pumps: - Delivery rate up to 150 l/min - Delivery pressure up to max. 4 or 7 bar - Motor power: 1.1 or 2.2 kW *Dimensions: - L/W/H: 1,450 mm x 750 mm x 1,680 mm - Unladen weight: approx. 480 kg - Circulating medium connection: DN 32 internal thread *Details & Highlights: - Internal refrigerant: R 123 a - Power supply: 380-425V/50Hz - Control and regulation unit SBC-T - Setpoint and actual value display, alarm indication - Fully hermetic reciprocating compressor - Refrigerant collector with safety valve according to DIN EN 378 - Capacity control - Frost protection monitoring - Flow monitoring - Protective grid over condenser - Oil sump heater - Draining device - Level monitoring via float magnetic switch - Installed dirt trap in the return line of the circulating medium - Bypass valve between supply and return for pump protection, set at the factory - High and low pressure limiter according to DIN EN 378 - Stainless steel tank, capacity: 80 litres, open system, fully insulated Iajdpfsg Ewwrox Alajt - Self-supporting chassis with castors, mobile - System designed for indoor installation - Control cabinet: IP 54 Other performance categories available upon request. Visit our website for further details. *This device complies with European directives. Other directives and standards are only met if explicitly stated in the order confirmation. This technical specification reflects the standard configuration. Customer-specific requirements deviating from the standard will be specified in offers or order confirmations.

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: Iodpfx Alsg Ezarjaoat - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: rabljeno, Leto izdelave: 2022, Sveži stroji z malo uporabe. Iasdpjyi Uqbsfx Alast Na voljo je več enot letnikov 2022 do 2023. Prosimo, povprašajte za specifikacije in cene!

Stanje: rabljeno, Hot runner control unit Günther DPT 10, 10-channel, 230 Volt Price: 1,850 Euro Iasdpfxeh Uucfs Alast Contact person: Mr. Rainer Eckerle

Stanje: rabljeno,

Stanje: rabljeno,

Stanje: rabljeno, Hot runner control unit Vetter MC 712 L-P, 12 zones, 220 Volt Price: €2,850 Contact person: Mr. Rainer Eckerle Iaedpokt Uzkjfx Alajt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), volumenski pretok: 8.000 m³/h, nazivni pretok: 6.950 m³/h, negativen tlak: 2.630 Pa, GS-tested for dust Iaedpowty Uzjfx Alast Extraction connection Ø 350 mm Pneumatic JET filter cleaning Extinguishing device with powder extinguisher With rotary airlock valve

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, volumenski pretok: 7.880 m³/h, filtrirna površina: 39 m², skupna višina: 2.816 mm, skupna dolžina: 3.999 mm, skupna širina: 1.367 mm, skupna masa: 1.550 kg, priključek za stisnjen zrak: 5 letvica, * Mobilni izpraševalec – visoko kakovostna sesalna tehnika za fleksibilno uporabo • Mobilni, robusten sistem za odstranjevanje prahu Primeren za notranjo in zunanjo uporabo – idealen za delavnice, gradbišča in začasna proizvodna območja. • Posebej stabilna in visokokakovostna konstrukcija Večje dimenzije kot običajne naprave – zasnovan za dolgotrajno, profesionalno neprekinjeno delovanje. • Edinstvenost: Mehansko-pnevmatsko čiščenje filtra ✓ Najbolj učinkovit način čiščenja na trgu ✓ Malo vzdrževanja, pogon na stisnjen zrak brez elektronike ✓ Najnižja poraba energije v primerjavi z običajnimi sistemi • Kompaktna, premišljena zasnova Omogoča enostavno povezavo z: o briketirnimi stiskalnicami o razbremenilnimi zaporami o posodami ali transportnimi sistemi • Pripravljeno za priklop – Plug & Play Brez potrebe po montaži – takoj pripravljeno za uporabo Iodpfxewku Iqe Alasat • Primerno za različne materiale Les, plastika, mešani prah in še več.

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), I am selling a radius copying milling unit for edges, suitable for CNC machining centers with edge banding by HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. 12,000 rpm. Radius R2mm. Iajdpfxohw Db Ie Alajt HSK63 holder. Available immediately.

Stanje: pripravljen za uporabo (rabljen), Suitable for filling sausages as well as for portioning potato and sausage salads. Caliber: 55/60mm. Output capacity: 3-4 sausages/min. Hopper capacity per funnel: approx. 100kg. Year of manufacture: 1990s. No documentation available. Inspection on site possible. Isdpfx Aloq Npf Ajaeat

Leto izdelave: 2016, stanje: kot nova (razstavni stroj), številka stroja/vozila: 00069, Präzisions-Temperaturregelgerät (TCU) – BOFA Baujahr: November 2016, Seriennummer 00069, ausgezeichneter Zustand, Filter in gutem Zustand, elektrische Dokumentation des TCU vorhanden, Kältemittel: R134a 0,75 kg im System Das Präzisions-Temperaturregelgerät wurde speziell für Anwendungen mit Lotpaste entwickelt. Reverse-Flow-Air-Technologie (RFA) erhöht die Filterleistung und verlängert die Lebensdauer. Prozessüberwachung durch Temperatursensoren, die flexibel im Drucker montiert werden können. Das TCU wurde entwickelt, um spezielle Prozessanforderungen in der Elektronikindustrie zu erfüllen. Für die zuverlässige Platzierung von SMD-Bauteilen während der Leiterplattenbestückung ist es entscheidend, dass bereits in der Druckphase die Lötpaste konstant eine Temperatur hält, die optimale Ergebnisse liefert. Da mittlerweile weltweit montiert wird, schwanken Klima und Fabrikbedingungen so stark, dass dieser Optimumswert ohne gezielte Steuerung oft nicht einzuhalten ist. Das TCU ist mit Kühl- und Heizeinheiten ausgestattet, die dafür sorgen, dass die Umgebungstemperatur im Druckbereich unabhängig von der Umgebungstemperatur immer bis auf 1°C genau konstant gehalten wird. Reverse-Flow-Air-Technologie (RFA): Durch die RFA-Technologie wird die Luftgeschwindigkeit verringert und die Strömungsrichtung umgekehrt. Größere Partikel setzen sich vor dem Filter ab und gelangen so nicht in das Filtermedium. Dadurch erhöht sich die Filterlebensdauer signifikant und die Filtrationsleistung bleibt konstant hoch. Technische Spezifikationen: 1. Kühleinheit Iaodjhgfnbspfx Alaot 2. Kondensat-Sammelbehälter 3. Luftauslass 4. Lufteinlass 5. Lenkrollen 6. Servicetür mit Schloss 7. Fehler-Kondensatsensor 8. Montagesockel für vierfarbige Statusleuchte Technische Daten: Luftführung: Umluftsystem Temperaturbereich: +/- 8°C von Umgebungstemperatur im programmierbaren Bereich 19–30°C Temperaturregelung: +/- 1°C Kühlleistung: 2.000 W Temperatursensor: Gemeinsames Signal vom integrierten Druckersensor (0 – 10 V Eingang für 0–50°C) Lufteingangsfilter: G4 (91 % Durchschnittsab scheidung) EN 779:2002 Kältemittel: R134a 0,75 kg Nennstrom: 12,6 A Anlaufstrom: 20 A Frequenz: 50/60 Hz Spannung: 230 V +/-10 % (207–253 V Arbeitsbereich) Einphasenbetrieb Schalldruckpegel: über 75 dBA* Abmessungen: 1.285 mm (H) + (Signalleuchte 450 mm), 540 mm (B), 670 mm (T) Kondensat: Sammlung in 5-Liter-Behälter zur Entsorgung oder mit Ablaufleitung Gewicht: 140 kg Dokumentation: Elektrischer Schaltplan enthalten Verkaufspreis: 1.900 Euro + MwSt., verhandelbar, FCA Oradea, Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim romana.

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), številka stroja/vozila: 2310-028, Präzisions-Temperaturregelgerät (TCU) – BOFA Baujahr: November 2013, Seriennummer 2310-028, hervorragender Zustand, der Filter ist in gutem Zustand, elektrische Dokumentation des TCU vorhanden, Kältemittelgas: R134a 0,75 kg im System. Präzisions-Temperaturregelgerät, entwickelt für Lötpastenanwendungen. Reverse-Flow-Air-Technologie (Umkehrluftstrom) verbessert die Filterleistung und verlängert die Filterlebensdauer. Prozessüberwachung mittels Temperatursensoren, die flexibel innerhalb des Druckers platziert werden können. Das Temperaturregelgerät (TCU) wurde speziell für die Anforderungen in der Elektronikbranche entwickelt. Für ein zuverlässiges Positionieren von SMT-Bauteilen auf Leiterplatten muss die Lötpaste während der Druckphase auf einer Temperatur gehalten werden, die eine optimale Performance sicherstellt. Weltweit unterschiedliche klimatische Bedingungen und Fertigungsumgebungen machen eine gezielte Temperaturkontrolle erforderlich. Das TCU verfügt über Kühl- und Heizelemente, welche die Temperatur innerhalb des Druckumfelds stabil auf ±1°C um den optimalen Einsatzwert halten – unabhängig von der Umgebungstemperatur in der Fertigung. Reverse-Flow-Air (RFA)-Technologie: Durch die RFA-Technologie wird die Luftgeschwindigkeit verringert und die Strömungsrichtung umgekehrt; größere Partikel scheiden sich im Abscheidebehälter des Filters aus. Dadurch gelangt weniger Staub in das Filtermedium, was die Lebensdauer und Effizienz des Filters deutlich erhöht. Technische Spezifikationen: 1. Kältemodule 2. Kondensatsammelbehälter 3. Luftauslass 4. Lufteinlass 5. Lenkrollen 6. Service-Türverschluss 7. Kondensatsensor mit Fehleranzeige 8. Befestigungsplatte für vier-Farben-Warnleuchte Technische Daten: Luftführung: Umluftbetrieb Iajdpfx Aohgg Rrjlast Temperaturbereich: ±8°C um Umgebungstemperatur, programmierbar zwischen 19 – 30°C Temperaturregelung: ±1°C Kühlleistung: 2000 W Temperatursensor: Gemeinsamer Ausgang mit integriertem Druckersensor (0 – 10V Eingang über 0 – 50°C) Lufteinlassfilter: G4 (91% mittlerer Abscheidegrad) EN 779:2002 Kältemittel: R134a, 0,75 kg Betriebsstrom: 12,6 A Anlaufstrom: 20 A Frequenz: 50 / 60 Hz Spannung: 230 V ± 10% (Arbeitsbereich 207 – 253 V), einphasig Geräuschpegel: >75 dBA* Abmessungen: 1285 mm (Höhe) + (Warnleuchte 450 mm), 540 mm (Breite), 670 mm (Tiefe) Kondensat: Sammelbehälter 5 Liter zur Entsorgung oder optional Ableitung direkt zum Abfluss Gewicht: 140 kg Dokumentation: Elektroschaltplan Verkaufspreis: 1900 Euro zzgl. MwSt., verhandelbar, FCA Oradea, Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch / Wir sprechen Deutsch / Beszélünk magyarul / Nous parlons français / Vorbim română.