Ebu Ekscentrični Pritisk - Enojni Stolpec nakup rabljenega (1.741)

Stanje: rabljeno, Leto izdelave: 1989, Skupna stiskalna sila: 80 t Grlo stroja: 280 mm Hod bata: 8 - 140 mm Ppodpfxsy Hqz Ss Altow Nastavitev bata: 100 mm Vgradna višina (hod spodaj, nastavitev zgoraj): 520 mm Vpenjalna površina mize cca: 850 x 670 mm Vpenjalna površina bata cca: 550 x 400 mm Prebojna odprtina v mizi: 250 x 180 mm Št. hodov na minuto: 20 - 100 min-1 Potrebna moč: 7,5 kW Dimenzije D x Š x V: 2210 x 1510 x 2750 mm Količina olja cca: 50 l Maks. teža orodja na batu: 300 kg Teža stroja cca: 8,3 t

Leto izdelave: 2013, stanje: zelo dobro (rabljeno), 1. SCOPE OF SUPPLY Ppodpfxefrzlmo Altsw • EBU H 12 FT Eccentric Press • Siegfried SPC Control Unit 2. DOCUMENTATION • Complete operating manuals available 3. TECHNICAL DATA Year of manufacture: 2013 Type: Eccentric press Rated force: 120 kN Max. tool installation height: 170 mm Max. upper tool weight: 25 kg Stroke adjustment range: 30 mm Ram height adjustment: 40 mm Strokes per minute: 40–200 Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1,200 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, tested machine: Power: 75 tons Strokes per minute: 90 spm Throat depth: 300 mm Pjdpfsy St Ncjx Altjpw Ram stroke: 16 - 140 mm Ram adjustment: 80 mm with protective guard newly safety-inspected (UVV-tested) .

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Pressing force 800 kN, stroke adjustment 30 - 240 mm, ram adjustment 80 mm, strokes 30 - 90 / min, table 1,200 x 800 mm, through-hole 350 x 370 mm, ram size 900 x 450 mm, throat depth 410 mm, max. table-to-ram 695 mm, ejector, ejector stroke 70 mm, ram weight compensation, oil-air cooling system, safety control III. Height 3,600 mm Psdpfx Aoiuxwqeltjpw Width 1,660 mm Depth 2,400 mm Weight 12,100 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, številka stroja/vozila: 5058870, Pressing force: 25 t Throat depth: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Strokes per minute: 150 /min Podpfsm Uxzuox Altspw Drive motor: 380 V, 1.1 kW Space requirements: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Leto izdelave: 1972, stanje: rabljeno, številka stroja/vozila: 51512/72, Pressing force: 75 t Throat depth: 300 mm Table size: 620 x 800 mm Pass-through hole in table: 225 x 325 mm Table adjustment: 175 mm Ram surface: 180 x 475 mm Ram adjustment: 80 mm Stroke adjustment: 16 - 140 mm Strokes per minute: 90 Drive motor: 380 V, 3 kW Required space: 1700 x 1200 x 2500 mm Weight: 3.3 t Pedpfx Aljb Tdqujtopw

Stanje: rabljeno, Single-column eccentric press EBU Type 75 SKU Machine No. P 4598462 Year of manufacture: 1962 Pressing force: 75 tons Throat depth: 300 mm Table size: 800 x 620 mm Scrap chute: 325 x 225 mm Ram area: 470 x 180 mm Clamping shank bore: Ø 40 mm Table height above floor: 845 mm Stroke adjustment: 16 - 140 mm Ram adjustment: 80 mm Max. installation height: approx. 420 mm Strokes per minute: 60 & 105 spm Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Pneumatic clutch-brake combination EBU - Overload protection with rupture disc in the ram - Tool monitoring system UNIDOR, type APS MINI - Mechanically driven gripper feed with strip straightener OSTERKAMP, type ZPN 200/350 - Strip width: 200 mm, feed length: max. 350 mm Ppodpfx Aedzqltjltew - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds via 2-step V-belt transmission on the gear train - Two-hand operation - Simple swing-away work area guard - Table height adjustment at lowest position = leadscrew adjustment 50 mm below floor level - Switch cabinet and operator panel for tool monitoring included and placed beside machine - Automatic central lubrication - 4 machine feet Space requirement (L x W x H): 2600 x 2300 x 2450 mm Weight: approx. 5.5 tons Good condition

Stanje: dober (rabljeno), Leto izdelave: 1960, številka stroja/vozila: P4461960, Ponudba 25471 Tehnični podatki: Pedexxwc Repfx Altspw - Tlačna sila: 75 t - Izrez cca: 300 mm - Velikost mize cca: 800 x 600 mm - Nastavljiva višina mize - Nastavitev hoda cca: 16–140 mm - Nastavitev batnice: 80 mm - Število hodov: 80/min - Priključek za pnevmatiko - Pogon: 400 V - Potreben prostor cca: Š 1800 x V 2450 x G 2000 mm - Teža cca: 4000 kg

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Tlačna sila: 800kN, največja vgradna višina orodja: 380mm, največja teža zgornjega dela orodja: 300kg, nastavitev hoda: 8mm-140mm, nastavitev višine batnice: 100mm, št. hodov: 100/min, izrez: 350mm, mere mize X/Y: 850mm/670mm, površina batnice: 550mm/400mm. Dimenzije stroja X/Y/Z: cca 2250mm/1550mm/2750mm, teža: cca 9000kg. Stroj je bil leta 2016 v celoti obnovljen s strani proizvajalca (retrofit). Leta 2024 so bili obnovljeni sklopka, rotacijski podajalnik, varnostni ventil stiskalnice in hladilnik hidravličnega olja. Leta 2021 so bili pogonski motor in jermen za vztrajnik predelani na frekvenčno regulirano hitrost. Dokumentacija je na voljo. Ogled na lokaciji je možen. Pjdpfx Aexq Exwjltjpw

Stanje: rabljeno, Leto izdelave: 1970, Adjustable stroke: yes Machine weight: approx. 9.5 t Serial number: 10457/2 Pressing force: 160,000 kg Ram strokes: 41 strokes/min +++++ Please note that the machine is currently dismantled and ready for loading. For this reason, a powered demonstration or the production of a video is not possible. Furthermore, our listing includes the most informative and highest-quality photos available. Unfortunately, sending additional pictures is not possible. Psdpfx Aevvx Exeltjpw +++++

Leto izdelave: 1996, stanje: rabljeno, Pressure: 80 t Stroke: 8–140 mm Stroke rate: 105 strokes/min Ram adjustment: 100 mm Table surface: 900 x 625 mm Ram surface: 600 x 280 mm Passage opening in table: Ø 150 mm Table height: 1000 mm Ram bore: Ø 40 mm Pjdpfx Aerc Ipnoltepw Installation height, ram adjustment at top: 490 mm Machine weight: approx. 7 t Space requirement (WxDxH): approx. 1800 x 2200 x 2600 mm Manual stroke adjustment Manual ram adjustment Mechanical rupture disc Hydraulic clutch-brake combination Manual central grease lubrication 2x roller feeds Zehnder+Sommer EV 320 (infeed and outfeed sides)

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 75 t, širina mize: 600 mm, dolžina mize: 800 mm, skupna dolžina: 20.400 mm, skupna širina: 18.300 mm, skupna višina: 24.100 mm, skupna masa: 4.650 kg, nastavitev hidravličnega cilindra: 80 mm, Can be inspected under power. Podpfx Alerr Sybotepw

Stanje: rabljeno, Ruska izdelava, Maks. tlačna sila: 25 t Pedpfxsxbf Sfj Altspw Velikost mize: 550 x 400 mm

Stanje: rabljeno, skupna masa: 2.000 kg, premer rotorja: 252 mm, skupna dolžina: 2.200 mm, skupna višina: 2.520 mm, skupna širina: 1.500 mm, širina rotorja: 800 mm, moč: 18,5 kW (25,15 KM), širina odprtine za polnjenje: 1.000 mm, dolžina polnilne odprtine: 1.050 mm, perforacija sita: 15 mm, premer ekstrakcijske šobe: 200 mm, Št. 04546 Enovaljni drobilnik / sekljalnik WEIMA WL 6 Rabljen Enovaljni drobilnik za drobljenje lesnih odpadkov, ostankov lesa in ploščatih materialov Moč motorja 18,5 kW Premer rotorja 252 mm Širina rotorja 800 mm Število vrtljajev rotorja 90 vrt/min Sistem V-rotor Hidravlični potiskalec materiala Ročno in avtomatsko upravljanje Rešeto z luknjami, premer lukenj približno 15 mm Dvodelna polnilna lijak, približno 1050 x 1000 x 1800 mm (D x Š x V) (višina vsakega od dveh elementov lijaka približno 900 mm) Ppodpfx Aleznnf Ujtow 2 odsesovalni priključki, premer vsakega 200 mm Dimenzije za transport, približno 2200 x 1500 x 2520 mm (D x Š x V) Teža, približno 2000 kg Za izogib morebitnim nesporazumom je možen ogled na kraju samem po dogovoru o terminu, kar je priporočljivo. Prodaja poteka v trenutnem stanju. Tehnični podatki, opis stanja, leto izdelave in obseg dobave so navedeni v prospektu proizvajalca oz. pri prejšnjem lastniku, brez garancije. Pridržujemo si pravico do vmesne prodaje. Za rabljene stroje velja izključek kakršnih koli garancij, z veljavnostjo: „kupljeno v videnem stanju“. Plačilni pogoji: Cene so navedene brez DDV, plačilo pred prevzemom oz. pošiljko. Pogoji dostave: dobava iz skladišča.

Stanje: rabljeno, Leto izdelave: 1994, KAISER preša Prešna sila 4.000 kN Ppodezp Ed Rspfx Altjw Nastavitev hoda 40–200 mm Nastavitev bata 150 mm Število hodov 20–80 1/min Površina mize 2.340 x 1.600 mm Površina bata 2.000 x 1.500 mm Vgradna višina 550 mm

Stanje: rabljeno, številka stroja/vozila: 005385, Type of applied edge: thin edge, thick edge, solid wood Ppedpfx Aog Iy Dusltew Glue system: EVA, laser Jointing cutters: yes Multi-function unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 8 units

Stanje: rabljeno, Leto izdelave: 1990, Press force 3 t Outreach 0 mm Stroke 200 mm Total power requirement 15 kW Machine weight approx. 4 t Space requirement approx. m JENNY - Switzerland, Automatic Double-Column Straightening Press Type RZ - 205 / 3 - 600, Year of manufacture 1990, Serial No. 86 596 _____ Press force of upper ram 3 t Ram stroke approx. 200 mm Max. installation height 500 mm Max. clamping length of workpiece 600 mm Height of center above table approx. 210 mm Ram feed rate down 0.17 mm/sec Ram feed rate up 0.02 - 0.17 mm/sec Pump drive 15 kW Total drive power approx. 20 kW - 380 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: Machine without automatic workpiece feed, the parts (wave-shaped) are manually loaded; a Plexiglas sliding hood is located in front of the work area, manually operated. Currently equipped with 1 straightening punch and 4 pneumatic measuring stations; however, connection options are available for up to 7 measuring stations. These are longitudinally adjustable along the lower press table over a range of approx. 500 mm; the straightening punch is adjustable on the upper ram in a prism guide. 2 tailstocks on the press table, adjustable for a max. clamping length of 600 mm; the left side is motor-driven and equipped with a clamping quill, the right side with a dividing disc. Workpiece rotation via stepper motor from 10 to 100 rpm. 2 workpiece supports (prisms) on left and right for placing the workpiece. The workpiece is measured at pre-determined positions and straightened accordingly; the straightening process is monitored and controlled with the measurement device. Ppodpfx Ast Hw Ameltjw Stroke control for pre-set ram stroke. Left tailstock powered. Original JENNY sequence controller (FMS) in a separate switch cabinet with monitor and keyboard for parameter input.

Stanje: rabljeno, Leto izdelave: 1984, Pressure 10 t Distance between uprights 500 mm Stroke 200 mm Total power requirement 10 kW Machine weight approx. 4,500 kg Space requirement approx. ... m M A E Automatic Double-Column Straightening Press with Microprocessor Control Model ADS F 10 RH Year of manufacture 1984 Serial No. 5 002 84 00 Straightening force - Upper ram pressing force 10 t Return force 7.5 t Ram stroke 200 mm Stroke speed 100 mm/s Maximum height above table 160 mm Clamping length of workpiece, approx. 600 mm Maximum installation height 600 mm Pump drive 5.5 kW Total drive power approx. 10 kW - 380 V - 50 Hz Weight approx. 4,500 kg Pjdpfx Alot Hwwdotopw Machine height approx. 3,300 mm Accessories / Special Equipment: • FEINPRÜF MILLITRON P 2070 measuring and process control system with display for fully automatic straightening operation: load workpiece, measure 'bend', position workpiece at 'maximum bend at top', straightening process, control measurement (and if necessary re-straighten), eject workpiece. • Machine equipped with a short workpiece feed via lifting beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points per workpiece; 2 workpiece supports left and right, plus 1 pneumatically adjustable straightening anvil. • The straightening punches are individually actuated pneumatically • Gripper for rejected parts that can no longer be straightened, mounted at the rear Condition: good to very good – demonstration ready shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further straightening presses in stock – please enquire.

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm mit Aufspannplatte – 340 – 530 mm Psdpjt Hwz Nsfx Altjpw Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.

Stanje: rabljeno, Leto izdelave: 1987, Tlak 800 t Premer vretena 100 mm Število vrtljajev vretena 45 /min Razdalja med stojali 600 mm Površina mize 560 x 650 mm Izmetna sila 5 t Hod izmetnega mehanizma 15 mm Površina stikala 590 x 450 mm Pjdpfxszl E Saj Altjpw Moč pogona 22,0 kW Teža 17,0 t Potreben prostor (ŠxGxV) 1,7 x 2,55 x 3,1 m Nominalni hod 1,46 mm z pogonom s kolenčastim vzvodom, zavoro vztrajnika, hidravlično sklopko z 2. zavoro, uravnoteženjem okvirja stroja, enojnim izmetnim mehanizmom v mizi, samonadzornim upravljanjem.

Stanje: novo, Continuous drilling capacity: 25 mm Standard drilling capacity: 30 mm Thread cutting capacity: M 12 Spindle: MK 3 Drilling depth: 135 mm Infinitely variable spindle speeds: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Power supply: 400 Volt, 50 Hz Features: - Thread cutting device - Digital speed display as standard Ppodpfx Alsd R Acbotjw - Coolant system - LED machine light - Stepless speed adjustment - 24 V electrics - Base plate with T-slots - Drill table adjustable via rack and pinion and pivotable around the column - Emergency stop switch - Full motor protection - Star handle - CE compliant

Stanje: novo, Max. drilling capacity: 35 mm Tapping capacity: M 24 Tool holder: MT 4 Spindle speeds, stepless: 65 - 2000 rpm Throat: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size / T-slot size: 685 x 485 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Features: - Variable drive for stepless adjustment of the required speed - Quill feed selectable by hand or via mechanical feed - Set speed can be read quickly and easily via digital display - Sturdy cast table with T-slots and coolant channel Ppodjd Sd Tvjpfx Altsw - Adjustable drilling depth stop, drilling depth can be read via scale - Tapping device - Gear preselector - CE / IEC compliance, German documentation and German-based service Scope of delivery: - Table clamping and height adjustment from the front - Quick-action drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MT 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MT 3/2, MT 3/1 - LED machine lamp - Height-adjustable safety guard

Stanje: novo, Maximum drilling capacity: 30 mm Tapping capacity: M 16 Tool holder: MT 3 Spindle speeds, stepless: 150 - 2500 rpm Throat depth: 265 mm Drilling depth: 150 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Motor power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Psdpjd R Nv Iefx Altspw Features: - Variable speed drive for continuously adjustable speed selection - Quill feed selectable either manually or by mechanical feed - Set speed quickly and easily readable via digital display - Robust cast iron table with T-slots and coolant channel - Adjustable drilling depth stop, drilling depth readable by scale - Tapping device - CE / IEC, German documentation and German service Scope of delivery: - Keyless drill chuck 1 - 16 mm / B 18 - Drill chuck arbor MT 3 / B 18 - Coolant system - Digital speed display - Reducing sleeves MT 3/2, MT 3/1 - LED machine lamp - Height-adjustable safety cover

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, BOLZ – posoda iz nerjavečega jekla za mešanje, 706 litrov tlakotesen magnetni mešalnik s plaščem za ogrevanje prostornina posode: 706 litrov uporabna prostornina: 600 litrov najvišja delovna temperatura: 150 °C Nord Drives – magnetni mešalnik moč: 0,55 kW Proizvajalec: drug letnik proizvodnje: 2006 Ppsdpozqantofx Altew potrebna površina: 140 x 105 x 215 cm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, VÖGELE Apparatebau, posoda mešala, prostornina 692 l tlakotesen magnetni mešalnik (Mavag / Nord) s plaščem za ogrevanje prostornina posode: 692 litrov prostornina plašča: 62 litrov deli, ki so v stiku z izdelkom, so iz nerjavečega jekla največji dovoljeni nadtlak: notranjost: -1 / +4 bar, plašč: -1 / 6 bar Ppsdpfx Alszqangstew Proizvajalec: neznan Leto izdelave: 2002 Potrebna površina: 110 x 130 x 210 cm