Enojni robniki

HOMAG KAL 210 AMBITION 2274/L LASERT

Stanje: zelo dobro (rabljeno), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, sliding table length: 320 cm main motor: 7 kW 3 spindle speeds maximum blade diameter: 450 mm tilt adjustment 0–45° electrically controlled with digital readout Gijdpfsv S Hy Asx Ad Asp blade height adjustment electrically controlled, without readout drip fence (rip fence) on the right, motorized adjustment up to 1240 mm digital readouts on carriage crosscut fence angle-cutting device included Branded machine in very good condition.

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: VZ0200A) Loading station with double pick-up station "BARGSTEDT" model TBH 500/D/30/12 VZ0200B) 1st double-sided sizing and edge banding machine "HOMAG" model KFL 525/8/A3/15 VZ0200C) Turning station (90° LONGITUDINAL-TRANSVERSE) "HOMAG" model TDL 310/30/12 Giedpodt Rgvjfx Ad Ajp VZ0200D) 2nd double-sided sizing and edge banding machine "HOMAG" model KFL 526/10/A3/30 VZ0200E) Turning station (90° TRANSVERSE-LONGITUDINAL) "HOMAG" model TDL 510/25/12 VZ0200F) Sword brush "WANDRES" VZ0200G) Stacking unit with double storage station "BARGSTEDT" model TSP 410/D/25/12

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Giedpswuz E Rofx Ad Asp Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Gsdpfxowlbxlj Ad Asip Automatic return system for workpieces with Winner 4A bridge offload

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers - Trim saws for precise end cutting Gisdpfet Hxxpjx Ad Ajp - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.

Stanje: rabljeno, številka stroja/vozila: 006835, Type of applied edge: thin edge, thick edge Gedpsrl Utbofx Ad Aeip Post-processing unit: yes Max. panel height: 55 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Giodpfx Adeuiy Nyj Asp Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Godpfjiidm Nex Ad Aeip Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 2128, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 65 mm, največja debelina roba: 15 mm, hitrost pomika os X: 18 m/min, trajanje garancije: 12 meseci, HOLZ-HER kantovací stroj SPRINT 1329 multi, rok výroby 2025, dodání ze závodu - Motorické nastavení tlakové lišty - iTronic – automatické řízení tlaku a množství lepidla - Motorické nastavení vodicího pravítka vstupu 1350 mm - Automatické mazání řetězu - Vertikální zástěrky pro nesting - Řídicí jednotka Edge-Control PPC 322W s 21,5" barevným dotykovým displejem - ECO-MODE úsporný režim - Předfrézovací agregát FG501 se 2 frézovacími jednotkami - Systém nanášení lepidla GlueJet GJ725 pro EVA a PUR v kazetách a granulátu, výkyvný o 90 stupňů - Zásobník pro 1,5 kg EVA granulátu - Motoricky poháněná tlaková jednotka D501 - Ořezávací agregát KA501 - Frézovací jednotka FR701 Mot6 multi Godpfsx Nqn Rox Ad Ajip - Rohovací frézovací agregát FF701 se 100% přesností opakování - Stahovací agregát ZT502 Mot6 multi s motorickým 6osým nastavením - Plošný stahovací nůž FK701 - Stříkací zařízení TR501 pro vstup a výstup - Stříkací zařízení GM501 za tlakovou jednotkou pro vysoce lesklé hrany - Lešticí agregát SW501 - Doba dodání: ihned k dispozici

Stanje: novo, MAIN MACHINE FEATURES: -Single-head drilling machine for drilling at 0° to 90° -Pneumatically adjustable head angle -Cast iron fences -Spindles adapted for quick-change couplings -Patented pneumatic material clamps -Cast iron worktable -Fast and precise adjustment -High-precision drilling STANDARD MACHINE EQUIPMENT: -Two 1.5 m aluminium stops (right and left) with two position stops each -Five quick-release clamps Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic clamps: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Gjdpfxjp Ecdgs Ad Aoip Spindle speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm