Demag Seilzug F Dr10 4/1 10T, 6M Hubhöhe nakup rabljenega (109.334)

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Clamping force: 3000 kN, holding force: 3300 kN, max. opening stroke: 670 mm, min. mould installation height: 330 mm, max. mould installation height: 710 mm, max. distance between platen surfaces: 1380 mm, platen size: 1040 x 950 mm, clear column spacing: 720 x 650 mm, max. mould weight: 4.7 t, max. weight on moving platen: 2.4 t, max. weight on fixed platen: 3.6 t, ejector stroke: 200 mm, ejector force: 69 kN, ejector retraction force: 31 kN, screw diameter: 50 mm, L/D ratio: 20, injection pressure at 400°C: 2426 bar, shot volume: 530 cm³, shot weight (PS): 480 g, max. dosing stroke: 270 mm, max. nozzle stroke: 470 mm, nozzle immersion depth (SVO): 20 mm, nozzle contact force: 110 kN, installed cylinder heating: 14.8 kW, material hopper volume: 110 l, oil tank capacity: 700 l, electric screw drive: 38 kW, electric drive clamping unit: 37 kW, pump aggregate power: 22 kW, installed total power: 112 kW, continuous sound pressure level: 78 dB(A), length: 6500 mm, width: 2000 mm, height: 2300 mm, weight: 15.7 t, PLC operating hours: 28,890 h, cylinder heating: 35,656 h, pump: 27,922 h, documentation available. An on-site inspection is possible. Cedpfx Agey Tx Rneujgu

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 39.500 km, moč: 77 kW (104,69 KM), vrsta goriva: dizel, gorivo: dizel, barva: srebrn, vrsta prenosa: mehanski, število prestav: 5, emisijski razred: Euro 6, število sedežev: 3, Leto izdelave: 2022, Število vrat: 5 Kabina: enojna Število cilindrov: 4 Prostornina motorja: 1.600 cm³ Tehnično stanje: zelo dobro Optično stanje: zelo dobro Cedjw R Uucspfx Agujgu Poškodbe: nobene Garancija: nobena

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Hydraulic injection moulding machine from 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mould height of 1530 mm. It is equipped with a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking for a high-quality injection moulding machine, you should consider the DEMAG 420/810 - 2300 we are offering for sale. Please contact us for further details. • Tie bar distance (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mould height: 820 mm • Max. mould height: 1530 mm • Max. daylight between platens: 1530 mm • Max. weight of the moving mould half: 2200 kg • Diameter/height of the centring ring: 160 × 15 • Sprue bush radius: R19 • Diameter of the ejector coupling thread: M24 • Shot volume: 1090 cm³ • Hot runner zones: 8 • Air cascade (quantity): 6 • Cascade hydraulics (quantity): 6 • Hydraulic core pulls: 2 • Oil fill capacity: 730 • Power supply: 217 A Cgodpfx Agsy Nyfljuju • Connected load: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. No.: 18616 Manufacturer: DEMAG Type: IntElect 80/370-100 NC4 All Electric Year of manufacture: 2007 Clamping Unit Clamping force: 80 tons Opening stroke: 340 mm Tie bar spacing (h x v): 370 x 370 mm Minimum mold height: 150 mm Injection Unit Screw diameter: 25 mm Injection volume: 51 cm³ Shot weight (PS): 45 g Injection pressure: 2000 bar Dimensions and Weight Dimensions (LxWxH): 4.3 x 1.3 x 2.3 m Machine weight: 4750 kg Additional Information: Cgedpfxezabkvj Agueu Technology that convinces in terms of energy efficiency: Less energy, higher precision The Demag IntElect series is among the pioneering machines that introduced fully electric drive technology to the plastics injection molding sector in the late 2000s. Unlike conventional hydraulic systems, where pumps and cooling circuits run continuously, the IntElect’s servo drive is activated only when actual movement is required. This fundamental difference enables 50 – 70% energy savings compared to hydraulic machines and significantly reduces annual operating costs. Motor System — Siemens MOTICS 3 Main drive motor · water-cooled servomotor The main drive unit precisely controls all clamping and injection movements. Plasticizing motor · water-cooled servomotor This motor, also based on the Siemens MOTICS 3 platform, plasticizes the material with precise speed and torque control to achieve a homogeneous melt; the water-cooled design ensures stable operation during long-term, intensive production. 5-Axis Full Servo Control The machine is equipped with 5 independent servomotors. Clamping, injection, screw retraction, ejector, and plasticizing are all fully servo-driven. Since each axis can be programmed independently, all movements can be executed simultaneously. This architecture delivers micron-level repeatable precision, shorter cycle times, and minimal mechanical wear compared to hydraulic systems. NC4 Control System The button-based NC4 system manages all machine parameters—including injection profile, mold protection, and cycle analysis—from a single screen.

Stanje: rabljeno, največja dovoljena obremenitev: 6.420 kg, skupna masa: 10.000 kg, konfiguracija osi: 2 osi, prva registracija: 07/1990, dolžina tovornega prostora: 8.400 mm, skupna širina: 2.500 mm, skupna višina: 3.900 mm, Zaradi številnih nepoštenih e-poštnih sporočil / na e-pošte se ne odgovarja WhatsApp x na voljo Nemška prikolica / nemška prometna dovolilnica Listnato vzmetenje Cgodpfx Agjx Dgdnsueu Skupna dolžina 10.250 Nakladalna površina cca 8,4 m "NAPAKE, TIPKARSKE NAPAKE IN VMESNA PRODAJA PRIDRŽANE"

Stanje: rabljeno, 2-speed electric motor with gearbox DEMAG type FG 08B-B3-23-H1-F1 Output speed fast: 915 rpm Output speed slow: 174 rpm 1 unit three-phase linear-rotor motor DEMAG Type: KBA 125 B Motor no. 3926599 Speed: 915 rpm Motor power: 4.7 kW Mains connection: 400 Volt, 50 Hz - Clutch disconnects via armature thrust movement in direct drive 1 unit three-phase linear-rotor motor DEMAG Type: KBA 80 A Motor no. 3926599 Speed: 1360 rpm Motor power: 0.83 kW Mains connection: 400 Volt, 50 Hz - Brake disconnects via armature thrust movement when driving - When stationary, the brake operates via the reduction gearbox on the motor - Output speed via the gearbox: 174 rpm Cgedjy N D E Aopfx Agueu Reduction gearbox DEMAG type FG 08B-B3-23-H1-F1 Gearbox no. 13926599 Input speed: 1360 rpm Output speed: 174 rpm Gear ratio: i = 7.8 Output shaft via motor rotor: Ø 32 mm Shaft stub length: 80 mm Pilot diameter on motor: Ø 125 mm Bolt circle diameter on motor: Ø 150 mm / 4xM12 internal thread Dimensions LxWxH: 1100 x 430 x 300 mm Weight: approx. 160 kg Good condition

Stanje: dober (rabljeno), prevoženi kilometri: 660.000 km, moč: 302 kW (410,61 KM), prva registracija: 03/1999, vrsta goriva: dizel, konfiguracija osi: 8x6, gorivo: dizel, vrsta prenosa: mehanski, število prestav: 16, emisijski razred: euro2, vzmetenje: jeklo, skupna dolžina: 9.000 mm, skupna širina: 2.500 mm, skupna višina: 3.060 mm, Leto izdelave: 1999, Oprema: ABS, = Dodatne opcije i oprema = - Opruge od lisnatih pera - Kardansko vratilo (PTO) = Napomene = Kiper sa tri strane 8x6 = Dodatne informacije = Tehničke informacije Broj cilindara: 6 Dozvoljena ukupna masa (zGG): 35.000 kg Konfiguracija osovina Vešanje: lisnata opruga Prednja osovina 1: upravljiva; Šara guma levo: 30%; Šara guma desno: 30% Prednja osovina 2: upravljiva Zadnja osovina 1: dvostruke gume; Šara guma unutra levo: 50%; Šara guma spolja levo: 50%; Šara guma unutra desno: 50%; Šara guma spolja desno: 50% Zadnja osovina 2: dvostruke gume; Šara guma unutra levo: 50%; Šara guma spolja levo: 50%; Šara guma unutra desno: 50%; Šara guma spolja desno: 50% Funkcionalnost Kiper: levo / pozadi Codpfx Agszbut Houegu Stanje Tehničko stanje: dobro Vizuelno stanje: dobro Dodatne informacije Za više informacija, obratite se Andreju, Henriju ili Andreju.

Stanje: dober (rabljeno), Leto izdelave: 2004, Demag Concept 125/475-320 Zatezna sila: 125 ton 2 x izvleki jedra na premičnih ploščah + Robot Demag W621-1831: X-550, Y-1000, Z-2000 (2004) Cgsdpfx Agexd Sz Eeuju

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, vpenjalna sila: 3.000 kN, skupna masa: 13.900 kg, Ta 5-osni DEMAG ERGOTECH CONCEPT 3000-1450 je bila izdelana leta 2001. Ima zapiralno silo 3000 kN in maso stroja 13,9 ton. Z maksimalnim hidravličnim tlakom 190 bar in pretokom 164 l/min je ta stroj zasnovan za učinkovito delovanje. Če iščete visokokakovosten brizgalni stroj, razmislite o hidravličnem brizgalnem stroju DEMAG ERGOTECH CONCEPT 3000-1450, ki ga ponujamo v prodajo. Za več podrobnosti nas kontaktirajte. • Maks. hidravlični tlak: 190 bar • Maks. pretok: 164 l/min • Skupni tok: 181 A • Tok ogrevanja: 102 A • Pogonski tok: 79 A • Krmilni tok: 67 A • Obratovalna napetost: 400 V • Frekvenca: 50 Hz • Certifikat: CE Cgodpfx Agoy Iciksuju

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. no.: 18622 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping Unit Clamping force: 100 t Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Minimum mould height: 200 mm Maximum mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 35 mm Shot volume: 115 cm³ Shot weight (PS): 103 g Injection pressure: 1600 bar Dimensions and Weights Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Weight: 5,500 kg Additional Information & Extras Core pull: 1 unit Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the category of high-precision, all-electric injection moulding machines, developed specifically for technical plastic parts, automotive applications, electronic components, and demanding serial production. All main machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements as well as ejector functions are fully electric, ensuring highest precision, excellent repeatability, and maximum process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approx. 60% up to 80% can be achieved depending on the application. At the same time, the reduced heat generation lowers the cooling demand and reduces overall operating costs. The machine features a direct servo injection and metering system, enabling very short response times and highly precise injection control. The injection unit is equipped with 4 heating zones, providing homogeneous plastification and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * All-electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for high-speed serial production Thanks to its long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series is still among the most sought-after all-electric injection moulding machines on the market. Cjdpfxey Ub D Ts Aguegu

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18621 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Year of manufacture: 2008 Clamping unit Clamping force: 100 t Opening stroke: 380 mm Tie bar spacing (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection unit Screw diameter: 35 mm Injection volume: 115 cm³ Shot weight PS: 103 g Injection pressure: 1600 bar Dimensions and weight Dimensions (LxWxH): 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional information: The Sumitomo (SHI) Demag IntElect series is among the highly precise, all-electric injection moulding machines, specifically developed for technical plastic components, automotive applications, electronic parts, and demanding high-volume production runs. All main machine movements are driven by direct-drive servo-electric motors. Injection, dosing, mould movement, and ejector functions are carried out entirely electrically, enabling maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly noted for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. Lower heat generation simultaneously reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo injection and dosing system, which allows very fast response times and provides highly precise injection control. The injection unit comes with 4 heating zones for homogeneous plasticising and stable process conditions, especially when processing technical plastics. Key benefits of the IntElect series: Cedpjy Ub D Hsfx Aguegu * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * High dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts * Suitable for fast, high-volume production runs Thanks to their long service life, stable production performance, and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref. No.: 18619 Manufacturer: DEMAG Model: IntElect 100/470-180 NC5 All Electric Cgedpoy Ub Dtjfx Agueu Year of manufacture: 2008 Clamping Unit Clamping force: 100 tons Opening stroke: 380 mm Tie bar distance (h x v): 470 x 420 mm Min. mould height: 200 mm Max. mould height: 430 mm Platen size (h x v): 690 x 620 mm Injection Unit Screw diameter: 30 mm Injection volume: 85 cm³ Shot weight (PS): 76 g Injection pressure: 2,180 bar Dimensions and Weight Machine dimensions LxWxH: 4.8 x 1.4 x 2.2 m Machine weight: 5,500 kg Additional Information: The Sumitomo (SHI) Demag IntElect series comprises high-precision, all-electric injection moulding machines specifically designed for technical plastic components, automotive applications, electronic parts, and demanding mass-production runs. All major machine movements are powered by direct-drive servo electric motors. Injection, dosing, mould movements, and ejector operations are executed fully electrically, allowing for maximum precision, outstanding repeatability, and optimum process stability. The IntElect series is especially valued for its low energy consumption and high production accuracy. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved, depending on the application. At the same time, the minimal heat generation reduces cooling requirements and overall operating costs. The machine is equipped with a direct servo-driven injection and dosing system, enabling extremely fast response times and highly precise injection control. The injection unit features four heating zones, ensuring homogeneous plasticizing and stable process conditions, particularly with technical polymers. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Low-noise and low-vibration operation * High dynamic servo performance * Minimal maintenance requirements * Clean production environment * Ideal for technical and precision parts * Suitable for high-speed series production Due to their long service life, stable production performance, and high energy efficiency, Sumitomo Demag IntElect machines remain among the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2012, Ref. No.: 18610 Manufacturer: DEMAG Model: IntElect 160/520-340 NC5 All Electric Year of manufacture: 2012 Clamping Unit Clamping force: 160 t Opening stroke: 495 mm Tie bar spacing (h x v): 520 x 520 mm Min. mould height: 275 mm Max. mould height: 585 mm Platen size (h x v): 760 x 785 mm Injection Unit Screw diameter: 35 mm Injection volume: 156 cm³ Shot weight (PS): 139 g Injection pressure: 2180 bar Dimensions and Weights Dimensions LxWxH: 5.4 x 1.5 x 2.1 m Machine weight: 7,600 kg Additional Information: The Sumitomo (SHI) Demag IntElect series belongs to the range of high-precision all-electric injection moulding machines, specifically developed for technical plastic parts, automotive applications, electronic components as well as demanding series production. All primary machine movements are powered by direct-drive servo-electric motors. Injection, dosing, mould movements, and ejection functions are executed fully electrically, ensuring maximum precision, excellent repeatability, and optimal process stability. The IntElect series is particularly renowned for its low energy consumption and high production precision. Compared to conventional hydraulic injection moulding machines, energy savings of approximately 60% to 80% can be achieved depending on the application. At the same time, reduced heat generation lowers cooling requirements and cuts overall operating costs. The machine features a direct servo injection and dosing system, allowing for extremely fast response times and highly precise injection control. The injection unit is equipped with 4 heating zones, ensuring homogeneous plasticizing and stable process conditions, especially for technical plastics. Key advantages of the IntElect series: * Fully electric direct-drive servo technology * Very low energy consumption * High precision and process repeatability * Quiet and low-vibration operation * Highly dynamic servo performance * Low maintenance requirements * Clean production environment * Ideal solution for technical and precision parts Cedpfxsy Ub Dms Aguegu * Suitable for high-speed series production Due to its long service life, stable production performance and high energy efficiency, the Sumitomo Demag IntElect series remains one of the most sought-after all-electric injection moulding machines on the market today.

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Premer vijaka 2: 22 mm Cjdsyz Tmyopfx Agujgu Razdalja med stebri V: 580 mm Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Cgodpfxjfdkb Us Aguou The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg Codpfx Asfdkbhsgusgu - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Csdpfeguk Dkjx Aguogu - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Siemens 1HU3056-0AC01 - Z motor SN: E6F10604048006 z 1HU1052 tahometrom 20mV/min in ROD 320 inkrementalnim dajalnikom, 2500 impulzov / obr. / Z = G45 (vgrajena zavora za zadrževanje), rabljen, z minimalnimi sledmi uporabe, 100% delujoč, dobava po slikah. Cedpfx Agsy Npr Iouegu

Stanje: pripravljen za uporabo (rabljen), Heidenhain BF 150 monitor ID: 353 522-04 Serijska številka: 34247984A, strokovno popolnoma obnovljen in preizkušen, s 6-mesečno garancijo, 100% funkcionalen, obseg dobave po slikah. Za ta artikel dogovorjeni prodajni popusti ne veljajo. Za ceno prosimo povprašajte posebej! Cgsdpfxoy Nqdlj Agusu

Stanje: pripravljen za uporabo (rabljen), Siemens SINUMERIK 810 TFT monitor LCD84-0019b, serijska številka S7999, rabljen, dobro ohranjen, 100% delujoč, obseg dobave kot na slikah. Cgedpfxsy Ntave Agusu

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Stroj Sumitomo DEMAG Systec 120/470-600 NC 5, letnik 2008, s krmiljenjem NC 5, polžem 45 mm, prostornino vbrizga 323 ccm / 294 g, zapiralno silo 1200 kN, razmak med vodili 470 mm x 470 mm, minimalna višina orodja 150 mm, maksimalna razdalja med ploščama 850 mm (900 / 950 z WA), hod odpiranja orodja 800 mm, hod izmetalca 180 mm. Stroj je trenutno v prenovi in se testira za delovanje. Csdpfx Asy Tcu Djgujgu

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 18565 Manufacturer: DEMAG Model: 150-610, System NC4 Year of manufacture: 2005 Clamping unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 500 x 500 mm Minimum mould height: 250 mm Daylight opening: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Cgjdpoxhfuaefx Aguju Dimensions and weight Dimensions (L x W x H): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional information: The hydraulic injection moulding machine of the Demag Ergotech System Series is a suitable plastics injection moulding machine for technical plastic parts as well as for automated series production. Thanks to its hydraulic drive system, the machine delivers powerful and stable injection performance, while the Demag NC4 control enables precise process management. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot data: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm Thanks to the robotic system, fully-automatic part removal, conveyor belt transfer, and automated series production are possible. Additionally, 2 complete spare plasticizing units / injection units (screw and barrel assemblies) are available. The machine was used reliably and without malfunctions in ongoing production until it was dismantled.

Stanje: rabljeno, prevoženi kilometri: 173.000 km, moč: 257 kW (349,42 KM), prva registracija: 08/2006, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, dolžina tovornega prostora: 2.700 mm, širina tovornega prostora: 2.450 mm, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, žerjav, Ref. No.: 263 MAN TGA 4x2 with EFFER Crane !!! Self-driving Work Machine !!! * MAN * TGA 18.350 * 4x2 drive * Air suspension front and rear * Perm. total weight: 18,000 kg * EFFER 365 S 8 crane * 8x hydraulic extensions * 2x outriggers * Hook height approx. 26 m * Cable winch * Lateral reach - see load diagram * Radio remote crane control * Foldable crane at the rear * Diff-lock * Central locking * Flatbed: 2700 mm x 2500 mm * 2-seater cab * Radio * Euro 4 * Tow coupling for 24 tons Cgjdjy N H I Hspfx Agusu * Green emissions badge * Net price: €84,900 * Invoice can be provided!!! Trade-in possible Financing from 4.99% Errors and prior sale excepted! The details in this advertisement are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be checked separately. All information in these ads is non-binding! Delivery throughout Germany available on request Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!!!

Stanje: rabljeno, prevoženi kilometri: 173.000 km, moč: 257 kW (349,42 KM), prva registracija: 08/2006, vrsta goriva: dizel, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, dolžina tovornega prostora: 2.700 mm, širina tovornega prostora: 2.450 mm, Oprema: ABS, filter saj, klimatska naprava, parkirni grelec, žerjav, Internal No.: 263 MAN TGA 4x2 with EFFER Crane !!! Self-propelled working machine !!! * MAN * TGA 18.350 * 4x2 drive * Air suspension front and rear * Permissible total weight: 18,000 kg * EFFER 365 S 8 crane * 8x hydraulic extensions * 2x supports * Hook height approx. 26 m * Cable winch * Lateral reach see load chart * Radio remote control for crane * Crane foldable at rear * Differential lock * Central locking * Flatbed dimensions: 2700mm x 2500mm * 2-seater cab * Radio * EURO 4 emission standard * Trailer coupling 24 tons * Green emission sticker * Net price: €84,900 * Price negotiable!!! Trade-in possible Financing from 4.99% Cgodpey N H Iysfx Agueu Subject to errors and prior sale! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typing or data transmission errors. The listed equipment details must be verified separately. All information in the listings is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 to 17:00 Friday from 9:00 to 14:00 and by appointment!!!

Stanje: rabljeno, Leto izdelave: 2024, For enquiries about the attachment, please contact Mr. Herden (via phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock & immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Shreds brush and wood up to 10 cm diameter - For excavators from 5 to 10 tonnes - Compatible with a variety of mount plates - Designed for hydraulic motor drive, depending on carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front and rear guards with chains - Heavy-duty, height-adjustable skid runners reinforced with carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min–max): 29–58 - Required hydraulic pressure in bar (min–max): 150–250 Cgsdpey Rdnasfx Aguju - Required hydraulic oil flow in l/min (min–max): 60–130 Intermediary adapter for BE314 Z1 incl. OQ45-5 adapter plate - approx. 200 mm high We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We offer a very large selection of Seppi products available from stock! Simply get in touch with us / . Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Errors and prior sale excepted! Internal no.: 170051 = More information = Please contact Marius Herden for further information.