Demag 4 Dh1000 Getriebe Mit Welle nakup rabljenega (67.582)

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Premer vijaka 2: 22 mm Bledpfx Aceyz Tmyemeh Razdalja med stebri V: 580 mm Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični 2x hidravlični ventil

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level. Bsdpfx Acjh R Taqemslh

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) Blsdpjmhhy Nsfx Acmsh - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 18565 Manufacturer: DEMAG Model: 150-610, System NC4 Year of manufacture: 2005 Clamping unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (h x v): 500 x 500 mm Minimum mould height: 250 mm Daylight opening: 750 mm Platen size (h x v): 750 x 750 mm Blodpfxsxhfuas Acmeh Injection unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Dimensions and weight Dimensions (L x W x H): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional information: The hydraulic injection moulding machine of the Demag Ergotech System Series is a suitable plastics injection moulding machine for technical plastic parts as well as for automated series production. Thanks to its hydraulic drive system, the machine delivers powerful and stable injection performance, while the Demag NC4 control enables precise process management. The machine is equipped with a Demag (Wittmann) DR721 linear robot. Robot data: Year of manufacture: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm Thanks to the robotic system, fully-automatic part removal, conveyor belt transfer, and automated series production are possible. Additionally, 2 complete spare plasticizing units / injection units (screw and barrel assemblies) are available. The machine was used reliably and without malfunctions in ongoing production until it was dismantled.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Tilting spindle moulder MAKA SF 4510 / GRIGGIO with power feed Bedpey Rh Nzsfx Acmolh Very good condition, the machine comes from a small village joinery with 3 people Everything works flawlessly All bearings and guides are in good condition, the machine runs very smoothly Comes with a milling fence where one fence jaw can be adjusted in depth and features fine adjustment with a scale, allowing for jointing operations, e.g., when processing a gluing profile The entire milling fence can be finely adjusted using a set screw, enabling very precise settings With spindle lock via locking lever Efficient chip extraction, with two 120 mm extraction ports at the fence and on the machine Fitted with a 30 mm spindle, steplessly tiltable from -5° to 45°, tilting is adjusted via handwheel, and there is a precise degree scale With forward/reverse rotation The machine is personally delivered and demonstrated by us throughout Germany for €220.00, so you face no risk on purchase. Delivery to other EU countries is also possible Large table opening, which can be reduced with various rings (thus allowing the use of cutters with very large diameters and enabling safe use of small cutters) Speeds of 3200, 4200, 6000, and 8000 rpm Spindle height adjustment is also via a handwheel with locking screw With exchangeable spindle (a 40 mm spindle can also be used) Optimal power transmission via V-belt drive The machine table is 1070 mm wide and 940 mm deep Ready to work immediately 380 V, 5500 W, with motor circuit breaker for overload protection Year of manufacture: 1999 Weight: approx. 700 kg CE marked With operating manual, motor brake, and emergency stop; the machine meets all requirements of the German Woodworkers' Association (Holz-BG) Additionally, you receive a 3-roller feed unit by HAFFNER with 8 speeds Optimal, simple, fast, and safe handling

Stanje: dober (rabljeno), Leto izdelave: 2003, Demag Ergotech Extra 800-430 (2003) Blsdpfx Asyyzi Hecmsh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, vpenjalna sila: 1.000 kN, Clamping force: 100 t Max. opening: 500 mm Mould height: 250 mm Platen size: 590x600 mm Distance between columns (vertical): 420 mm Distance between columns (horizontal): 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm³ Injection pressure: 2755 Additional equipment: 1. 2 hydraulic core pull circuits on the moving clamping plate (proportional valves) 2. Additional connections for 2 core pulls on the fixed clamping plate 3. Pneumatic core pull (2 circuits) on the moving clamping plate 4. 4-zone cooling water flow regulator with temperature display 5. Compressed air blow-out valves on fixed and moving clamping plate (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation devices Bledex Tdp Nopfx Acmoh

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 35.000 h, vpenjalna sila: 100 kN, delovna prostornina: 51 cm³, tlak vbrizgavanja: 2.800 letvica, skupna masa: 5.000 kg, premer polžastega transporterja: 25 mm, Dobavni pogoji: FCA Pegnitz Blodpfxjwlkb Ns Acmjh Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: FCA Pegnitz Blodpfx Aswlkcajcmeh Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: rabljeno, Leto izdelave: 2007, obratovalne ure: 67.000 h, vpenjalna sila: 250 kN, delovna prostornina: 530 cm³, tlak vbrizgavanja: 2.426 letvica, skupna masa: 14.200 kg, premer polžastega transporterja: 50 mm, Terms of payment: 100% net payment before collection of the machine Delivery time: to be agreed Freight terms: ex works Bedpfx Acswz R Iusmjlh

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG stropni žerjav KBKII -R, žerjavna naprava, delavniški žerjav, mostni žerjav Nova cena: več kot 40.000,00 € Z izmenjevalnikom tirov levo, ročna izvedba, art. št. 87396344 (sama stane 11.000,00 € neto nova cena) 6x 6m ravni deli 2x 5m 4x 2m 3x 1,5m (skupaj 60 tekočih metrov ravnih delov z integrirano notranjo napajalno tirnico, ni potrebna vlečna kabelska veriga!) 2x 90-stopinjski ovinek KBKII-R Bsdpfjv Uvdpex Acmelh z vsemi potrebnimi deli kot so vozički, obešala, objemke ipd. Možnost: 4x DEMAG električni verižno dvigalo PK5 N-F 500kg, 2 hitrosti (pripada napravi, a ni nujno za prodajo), zelo dobro stanje Naprava v preizkušenem stanju z revizijsko knjigo, popolnoma funkcionalna, takoj pripravljena za uporabo Info: več kot 20.000 DEMAG rezervnih delov na zalogi! Oglejte si tudi ostale ponudbe iz moje zaloge!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Schließkraft: 100 t Öffnung max: 500 mm Formenhöhe: 250 mm Plattengröße: 590x600 mm Abstand zwischen den Säulen V: 420 mm Abstand zwischen den Säulen H: 420 mm Typ: Horizontal Antrieb: Hydraulisch Schneckendurchmesser: 30 mm Einspritzgewicht: 103 g Einspritzvolumen: 115 cm³ Einspritzdruck: 2755 Zusatzausstattung: 1. 2 hydraulische Kernzugkreise an der beweglichen Aufspannplatte (Proportionalventile) 2. Zusätzliche Anschlüsse für 2 Kernzüge an der festen Aufspannplatte 3. Pneumatischer Kernzug (2 Kreise) an der beweglichen Aufspannplatte 4. 4-Zonen-Kühlwasserdurchflussregler mit Temperaturanzeige 5. Druckluftblasventile an der festen und beweglichen Aufspannplatte (programmierbar) 6. Integrierte Heißkanalregelung, 8 Zonen 7. Schnittstellen für externe Düsenheizbänder 8. Schnittstelle für integrierte Temperiergeräte (bis zu 6 Kreise) 9. Schnittstelle für Werkzeugtemperaturüberwachung (2 Kreise) Bljdpfjx Tdwyjx Acmeh 10. EUROMAP 67 für Automatisierungsgeräte

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG dvigalo P400 P600 P1000 skupaj 24 delov - Precizni pogon FG - Glavni dvižni motor - Ohišje - Boben za vrv - Vodilo vrvi - Zavora Bledpfx Aov Uvubscmeh Dobro stanje, deloma odlično rabljeno do novo Info: 20.000 nadomestnih delov in komponent DEMAG na zalogi! skladišče DEMAG delov

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Bledpfxeyu R Dzs Acmjh Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: MIKA Seilzüge, 1x Palan à câble Demag DR pour grue En raison des nombreuses demandes - le prix est indiqué par pièce !!!! 5 pièces disponibles, voir liste : 1x Palan à câble Demag EKDR-Pro3 NL1600Kg/1,6t, numéro de série 96656002, 4M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96656701, 2M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305549, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305548, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96305550, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 Avec 2 vitesses de levage, hauteur de levage 12 m, écartement du palan réglable. Chacun avec boîtier de commande suspendu et fiche de raccordement pour l’alimentation électrique. Bjdpfsy D D S Ssx Acmolh Poids total env. 300 kg, alimentation 400V 50Hz. Très bon état, voir photos. Localisation de l’article : 75053 Gondelsheim Expédition possible, merci de préciser votre code postal pour un devis.

Stanje: rabljeno, Demag Ergocontrol IBED NC4 - odstranjen iz Demag Ergotech El-Exis S 60/370-310 - odvzet iz stroja v obratovanju - en pokrov manjka - nima vpliva na funkcionalnost - popolnoma funkcionalen Proizvajalec: Demag Tip: NC4 Št. rezervnega dela: 89380065 Blsdeyxg Swepfx Acmoh Št. proizvajalca: D Če se rezervni del prodaja v postopku izmenjave, sledi delno dobroimetje po prejemu in pregledu poškodovanega dela s strani proizvajalca. Pridržujemo si pravico do zavrnitve dobroimetja glede na stanje oziroma starost vrnjenega dela. Poškodovani del mora biti v stanju, primernem za popravilo, dobroimetje sledi po potrditvi proizvajalca.

Stanje: zelo dobro (rabljeno), DEMAG hoisting motor for DH1000 / DH1200 hoist Type KBH160 B4 Excellent condition, overhauled, original price €14,600.00 Several in stock Bledev Uvdiopfx Acmoh Also individual parts available, both new and used Offered well below manufacturer's original price

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25MythoSarya05, Exhibition unit Mytho S Bjdpoykuh Nsfx Acmelh with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Wrapping height 2,450 mm 99 programs 7" TOUCH display Bjdpfxoykud Re Acmjlh Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Exhibition unit Mytho S with TP / horseshoe cut-out, ground-level accessible with pallet jack and electric pallet truck MAST VERSION Bsdpfeyktrtjx Acmjlh Wrapping height 2,450 mm 99 programs 7" TOUCH display Film carriage type “PRS” (POWER ROLLER STRETCH) with 200% pre-stretch, optionally adjustable for more or less pre-stretch Turntable / TP diameter 1,650 mm / Opening 06.00 - Mast 12.00 (modifiable at any time) ARYA system for automatic film blowing-on and cutting, incl. infrared remote control

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: GP147/147.2/147.3/58, 1 Vetter stenski vrtljivi žerjav, nosilnost / dvižna zmogljivost 500 KG Na voljo so 4 žerjavi! Tip PW2,5-4.0 Izvlek ca. 4 m, nosilnost 500KG - 0,5 t S verižnim dvigalom, nosilnost 500KG (2 hitrosti dviga) Bjdpfx Aoy D D Imecmolh Skupna teža približno 500 kg Letnik 1999 Popoln komplet z nosilno konzolo, iztegnjenim krakom, verižnim dvigalom, kabelsko verigo, podvozjem in drobnim materialom Kot vrtenja ca. 180° Lokacija artikla: 75053 Gondelsheim Naprava je popolnoma razstavljena in takoj na voljo V celoti delujoče stanje Oglejte si slike Pošiljanje s špedicijo ali osebni prevzem Stroške dostave vprašajte glede na poštno številko

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 57.628 h, vpenjalna sila: 800 kN, premer vijaka: 35 mm, injekcijska masa: 149 g, This DEMAG SYSTEC 80/420-310 was manufactured in 2008. With a clamping force of 800 kN and a screw diameter of 35 mm, it is suitable for processing a range of materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann linear robot and a Gravimax 14R gravimetric mixer. If you are looking for a high-quality injection moulding machine, you should consider the hydraulic injection moulding machine DEMAG SYSTEC 80/420-310, which we offer for sale. Contact us for further details. • Processed materials: PA, PP, PE, ABS Blodeyyyuuspfx Acmjh • Cylinder temperature: up to 450°C • Tie bar spacing: 420 mm • Injection unit: 310 • Control system: CDIAS / NC5 • Total operating hours (PLC): 108,544.0 h • Drive operating hours: 57,628.7 h • Heating operating hours: 73,426.7 h • Total cycle count: 5,058,031 • Voltage: 400 V • Frequency: 50 Hz • Current: 114 A • Maximum pressure (Pmax): 235 bar • Maximum flow rate (Qmax): 104 l/min • Mold installation height: 300 mm • Maximum daylight between platen: 750 mm • Availability: mid-2026 Additional equipment • Wittmann linear robot (handling/robot) • Gravimax 14R gravimetric mixer • TORO Systems material loader

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. Featuring a clamping force of 1500 kN and a screw diameter of 45 mm, it is suitable for processing various materials such as PA, PP, PE, and ABS. The machine offers a maximum pressure of 190 bar and a shot volume of 358 cm³. If you are looking for a high-quality injection moulding machine, we recommend considering the hydraulic DEMAG ERGOTECH 1500-840, which we have available for sale. Contact us for further details. • Shot volume: 358 cm³ • Processed materials: PA, PP, PE, ABS, etc. • Barrel temperature: up to 450 °C • Maximum pressure: 190 bar • Maximum flow rate (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of manufacture: 1999 • Availability: mid-2026 Bodpfx Acsyyyn Usmslh Additional Equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) – X-stroke: 550 mm – Y-stroke: 1200 mm – Z-stroke: 2000 mm – Weight: 300 kg • Wittmann W633 – Robot no: W633 – X-stroke: 500 mm – Y-stroke: 1400 mm – Z-stroke: 2000 mm – Weight: 475 kg • Wittmann W743 – Robot no: W743 – X-stroke: 1200 mm – Y-stroke: 2000 mm – Z-stroke: 4000 mm – Weight: 835 kg – Connected load: 18 A / 12.5 kVA – Voltage: 400 V

Stanje: pripravljen za uporabo (rabljen), DEMAG DH2100 H18 - 40t Blodpfoy D Iwxjx Acmeh

Stanje: dober (rabljeno), Leto izdelave: 2010, številka stroja/vozila: ENOG, DEMAG KBK Crane Suspension System / Crane Runway Approx. 8x4 m Bledpemqf Nfofx Acmjh Load Capacity / Lifting Capacity: 250 KG - 0.25 t Technical Data of the System: Crane runway made of Demag KBK1 + KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, mounting brackets/hangers, etc. Including Demag DC-COM 250 KG electric chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems also available. Load capacity ranges from 125 KG to 1600 KG. Please inquire with your required crane runway length, overhang, and dimensions.