Dah Lih Dl-Mcv 610 nakup rabljenega (2.667)

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 1480 x 1150 x 1250 mm Weight: 550 kg Total power requirement: 3 kW Double-sided long hole drilling machine DL-130 - Maximum slot length: 130 mm - Maximum groove depth: 60 mm - Slot width: 16 mm Dksdpfsvz Evnex Ahqer - Maximum travel of the work table: 70 mm - (left/right) Work table tilt angle: -20° to +20° - (forward/backward) Work table tilt angle: -5° to +25° - Frequency: 170 - 230 cycles/min - Speed: 15,000 rpm - Motor: 2.2 kW - Oscillation motor: 0.5 HP - Compressed air connection: 6 bar - Includes 2 pneumatic clamps per side - Dimensions: 1480 x 1150 x 1250 mm - Net weight: 550 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, dolžina brušenja: 620 mm, širina na sredini: 680 mm, premer brusilnega koluta: 350 mm, skupna širina: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete dismantling of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings of the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to a like-new condition Geometry: - Hand scraping of the X-axis guideway - Hand scraping of the Z-axis guideway - Grinding of the X-axis table - Grinding of the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle headstock, grinding spindle headstock, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: The main assemblies will be newly painted; the rest of the machine will retain its original paintwork. Electronics: Dkjdperz Nflsfx Ahqsr The entire machine's electronics will be inspected, tested, and any defective switches and cables will be replaced.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, višina središča: 100 mm, širina na sredini: 680 mm, skupna dolžina: 620 mm, premer brušenja: 199 mm, Condition of the machine: The machine is currently in used, non-refurbished condition. All wear parts of the machine will be replaced, including the X-axis feed spindle, and all assemblies will be brought to a like-new condition. After refurbishment, the machine is easily comparable to a new machine. Geometry: The machine will be completely disassembled except for the guideways. Before restoring the geometry of the individual tables and assemblies, the guideways of both the Z and X axes will be hand-scraped and restored to like-new condition. Upon completion of these works, the machine will receive a measurement report according to the original manufacturer's specifications. Electronics: The electronics and the control cabinet enclosure will be completely replaced. All electrical components will be renewed, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, will be replaced. The hydraulic unit will be overhauled, and the hydraulic lines will be replaced with new ones. Dedpfx Ahjv Hqlrsqokr Painting: Once the geometry of the machine has been restored, it will be prepared for repainting. All covers, tables, and the machine bed will be stripped of old paint, cleaned, and newly coated. Technical data of the machine: Centre height: 100 mm Centre width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Machine weight and footprint: 2600 kg // 2320 x 1400 x 1450 mm Standard equipment: • 1 pc. grinding spindle head Ø35 • 1 pc. workpiece spindle head MK5 • 1 pc. safety cover for discs Ø400 mm • 1 pc. tailstock MK3 standard • 1 pc. flange Ø127 mm • 1 pc. hydraulic unit • 1 set of operating tools and operating manual

Stanje: rabljeno, Leto izdelave: 2010, Grinding length: 1025 mm Grinding width: 520 mm Control: SINUMERIK 840 D Tool holder: HSK-A 63 A-axis: ° Workpiece weight: 30 kg Distance grinding spindle – table min./max.: 473.5 – 1023.5 mm X-axis: 520 mm Y-axis: 550 mm Z-axis: 1000 mm V-axis: 166 mm Feed rate X-axis: 4 – 6,000 mm/min Dksdevxwl Aspfx Ahqjr Feed rate Y-axis: 4 – 4,000 mm/min Feed rate Z-axis: 30 – 25,000 mm/min Table dimensions: 1,400 x 874 mm Grinding spindle speeds, stepless: 0 – 12,000 rpm Drive power – grinding motor: 35.00 kW Grinding wheel diameter min./max.: 100 / 300 mm Grinding wheel width: 60 mm Total power requirement: 100.00 kW Machine weight approx.: 11.00 t Space requirement approx.: 8.60 x 7.25 x H3.80 m Profile grinding machine in 5-axis configuration, with SIEMENS SIN840D, dual dividing head (B- and C-axis), V-axis (coolant nozzles), Tool changer system EROWA (machine can also be operated without tool changer), fire extinguishing system, Renishaw probe prepared. Without master computer for tool/workpiece management. Without coolant system – was connected to central supply.

Stanje: rabljeno, Leto izdelave: 2010, Grinding length: 1025 mm Grinding width: 520 mm Control: SINUMERIK 840 D Tool holder: HSK-A 63 A-axis: ° Workpiece weight: 30 kg Distance grinding spindle - table min./max.: 473.5 - 1023.5 mm X-axis travel: 520 mm Y-axis travel: 550 mm Z-axis travel: 1000 mm V-axis travel: 166 mm Feed rate X-axis: 4 - 6,000 mm/min Feed rate Y-axis: 4 - 4,000 mm/min Feed rate Z-axis: 30 - 25,000 mm/min Table dimensions: 1,400 x 874 mm Grinding spindle speed, stepless: 0 - 12,000 rpm Grinding spindle motor power: 35.00 kW Grinding wheel diameter min./max.: 100 / 300 mm Grinding wheel width: 60 mm Total power requirement: 100.00 kW Machine weight approx.: 11.00 t Floor space requirement approx.: 8.60 x 7.25 x H3.80 m Dedpfx Aovxwinohqjkr Profile grinding machine in 5-axis configuration, with SIEMENS SINUMERIK 840D, dual rotary table (B- and C-axis), V-axis (coolant nozzles). Tool changer system EROWA (machine can also be operated without tool changer), fire extinguishing system, prepared for Renishaw probe. Without master computer for tool/workpiece management. Without coolant system – machine was previously connected to a central supply.

Stanje: rabljeno, Leto izdelave: 2016, Mitre plate saw with automatic pre-tensioning and double pusher system for optimized cutting OSI Plus numerical control OS Labeling – onboard labeling unit with graphical marking of parts including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Powered feed rollers for side loading via lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of disposable (sacrificial) boards based on specified thickness data in the machine parameters Low stack stop Automatic side loading. Includes: containment fences, twin photocells, pushbutton panel, electrical preparation for the two powered infeed roller conveyors, plus reinforcement with 4 rollers instead of fork passages on the infeed conveyor Intermediate roller conveyor Side loading roller conveyor measuring 3800 x 2200 mm with powered rollers (floor-to-conveyor height 325 mm) Dedjuc Idxepfx Ahqekr Gravity conveyor for longitudinal offcuts to corner station 4500 mm (total length: 7295 mm) 3000 mm conveyor extension for crosscut offcuts Long chute for manual crosscut transportation to the central gravity conveyor Air-cushion outfeed table 2050 x 850 mm, front side equipped with wheels Air generator for up to 6 air-cushion table decks MULTIPUSHER 2.4 System with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows reduction of the minimum panel length to be crosscut from 1830 mm to 1220 mm Automatic device for detecting blade shaft flexure in angular cuts (longitudinal and cross axes), consisting of a sensor for direct deflection measurement on the blade shaft and a device for recording saw blade revolutions directly at the chuck Remote-cycle start keypad Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main sawblade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed: 1–140 m/min (servo motors) Longitudinal pusher carriage speed: 90 m/min Cross pusher carriage speed: 135 m/min Double shuttle carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed + 2 on the Multi-Pusher cross carriage) Cutting system for thin panels

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Technical data: Dimensions (LxWxH): 1850 x 1820 x 2400 mm Table size: 700 x 350 mm Travel X-axis: 610 mm Travel Y-axis: 355 mm Travel Z-axis: 460 mm Tool changer positions: 16 Arm-type changer: Optional Max. table load: 350 kg Spindle: 10,000 rpm Weight: 2,500 kg CNC control: SIEMENS 828D SHOPMILL The following additional equipment is installed: - Increased spindle speed to 10,000 rpm - Swarf conveyor in hinged chain design - Coolant supply through milling spindle (internal cooling) - With 20 bar high-pressure pump = 55 l/min, separate tank - Automatic tool changer without arm for 16 tools - Preparation for 4th axis Full enclosure (CE) Automatic tool clamping Automatic tool changer Automatic spindle blow-out Auger chip conveyor Oil separator Coolant system Automatic central lubrication Dksdpfeyi Ucqjx Ahqsr Work lamp Portable electronic handwheel for all 3 axes Telescopic covers for all 3 axes Chip flushing aid CE conformity Your advantages at a glance ✔ As-new showroom machine ✔ High-quality additional equipment ✔ 40% price advantage ✔ Immediately available If you are interested, we would be happy to provide further information, arrange a viewing, or submit an individual offer.

Stanje: dober (rabljeno), Leto izdelave: 2017, Hladilni stroj Engie SPF 204 DL, vodno hlajen hladilnik vode (v kombinaciji s suhim hladilnikom ali hladilnim stolpom, 209 kW hladilne moči) Letnik izdelave: 12/2017 Cena: 14.500 € Kontaktna oseba: g. Rainer Eckerle Dkjdjg T H Hrepfx Ahqsr

Stanje: rabljeno, Premer čeljustne plošče 610 mm Skupna potrebna moč . kW Teža stroja cca. . kg Potreben prostor cca. . m 170 mm krožno razporejene izvrtine Tehnični podatki so navedeni po informacijah proizvajalca ali uporabnika in so nezavezujoči za nas. Pridržujemo si pravico do vmesne prodaje; veljajo izključno naši splošni pogoji prodaje in dobave. O nas več kot 400 lastnih strojev na zalogi Dodpfx Asyycx Ashqskr več kot 15.000 m² skladiščne površine, zmogljivost dvigala 70 t več kot 10.000 kosov dodatne opreme za vašo delavnico Če želite prodati stroje, proizvodne linije ali celoten obrat, nas kontaktirajte. Več ponudb najdete na naši spletni strani. Ogledi so možni po predhodnem dogovoru. Veselimo se vašega obiska. Vaša ekipa Markus Hirsch

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 62.490 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 160 kN, premer vijaka: 45 mm, injekcijska masa: 330 g, Negri Bossi 160T v zelo dobrem stanju, s popolno servisno zgodovino Negri Bossi. Razdalja med veznimi stebri 510x450 mm. Vmesnik za robota in dve hidravlični jedri. Djdpfx Ahszd U Dioqjkr

Stanje: dober (rabljeno), Filtrirna enota Camfil CS 610 za industrijske odsesovalne sisteme Proizvajalec: Camfil KG Dkodpfx Ahjyrnfwjqor Model: CS 610 lakiran Tip: Filtrirna enota za industrijske odsesovalne sisteme Številka artikla: 518110 Serijska številka: 000442739182 Količina: 2

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2007, Table size 2200 x 1000 mm Longitudinal travel 2050 mm Cross travel 1150 mm Vertical travel 760 mm Spindle speeds 12,000 rpm Spindle taper ISO 40 Dodpfx Aheg Tdavsqekr Feed rate 1 - 8,000 mm/min Rapid traverse Z-axis 15 m/min Rapid traverse X - Y axes 20 m/min Control HEIDENHAIN IT 530 NC Number of tools in magazine 40 pcs

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 1 Panel dividing saw with area storage Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – Right-handed machine Year: 2008 Including integrated area storage PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore storage management software, scrap management, etc. Storage area approx. 37 x 11.5 m Maximum stacking height in storage: 2,500 mm Speed Concept: Setting a completely new benchmark, revolutionizing panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage + Substantial acceleration of the pusher + Central angle alignment device + Electronic height control of the pressure beam + Optimized movement sequences with integrated gripper measurement system Cutting length: 5,600 mm Cutting width (pusher carriage travel): 5,600 mm Panel rotation device for head cuts Laser alignment light for marking the cutting line on the workpiece for visual or scribed cutting Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle feeding of sensitive single panels by vacuum, as well as efficient infeed of panel stacks Saw blade projection: 130 mm Saw carriage feed: Forward: 1–150 m/min Reverse: constant 150 m/min Pusher speed: Forward/reverse: 90 m/min (In EU countries, forward = 25 m/min) Automatic pressure beam height adjustment: yes Automatic cutting height control: yes Adjustable pressure beam clamping force: yes Adjustable gripper clamping force: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device Minimum clamping width: 0 mm Maximum clamping width: entire cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Dkjdsyw Ivhspfx Ahqsr Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT WITH LIFTING ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTION FENCE Program-controlled ejection of part stacks into the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVING PROGRAM (AUTOMATIC) Grooving program with graphical input and process graphics. Positioning accuracy: Groove depth continuously adjustable via control system (hydraulic stop) CUT-OUT / STRESS-RELIEF CUT PROGRAM PART LABELING WITH GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermal transfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' – JUST-IN-TIME – Additional function 'Just-in-time' (possible operating modes): 1. Optimization at the saw ----- - Import function for parts lists from industry packages, Excel, etc. - Inclusion of available remnants in the optimization - In case of production interruption, unproduced parts can be re-optimized - Free selection of which parts with which material to optimize and produce at what time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available remnants - Change panel sizes - Combine runs, etc. A new optimization then takes place directly at the saw. DATA TRANSFER ONLINE + USB PORT CAMERA MONITORING OF THE FEED AREA Material specification for lift table feeding: Maximum waviness: 40 mm/m Minimum panel thickness: 6 mm Maximum thickness tolerance per panel: +/- 0.2 mm Stacking accuracy: +/- 50 mm

Stanje: rabljeno, Transistor pulse inverter for three-phase feed drives with analog control, servo amplifier SIEMENS Type Simodrive 610 6SC6101-3A-Z Serial No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters were developed for powering 1FT5/1FS5 three-phase servomotors. The dynamic characteristics of these motors are designed to be optimally utilized. Depending on the configuration of the power module, the pulse inverters can be used for a wide range of applications. This flexibility is further increased by expansion modules for the power section. Djdpfxjh D Syvs Ahqskr Connection voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA—not included in delivery) Output voltage: 3 DC 200 Volt Efficiency: approx. 95% Number of feed axes: 4 Speed setpoint: ±10 Volt Auxiliary voltage: 24 Volt Relay contact for fault/operation ready messages Dimensions W x H x D: 339 x 440 x 300 mm Weight: approx. 25 kg The servo amplifier is still operational in a Gildemeister GDM42. Additional components from the Gildemeister can be found under stock numbers: 60343, 60347, 60348

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, vrsta pogona: Elektro, High-pressure cleaner Condition: New device Technical condition: New Dkodpsxmb Sfsfx Ahqjr Description: New device

Stanje: novo, Oprema: CE označba, dokumentacija / priročnik, – Semi-automatic – Hydraulic – Infinitely variable bandsaw speed adjustment – Double mitre – Hydraulic clamping of the mitre setting – Saw feed pressure hydraulically adjustable – Fully hydraulic material clamping – Hydraulically adjustable clamping pressure – Coolant system – Automatic shut-off – Automatic machine shut-off in case of: open cover, broken blade, insufficient blade tension Dksdpfxevkkl Te Ahqer – Emergency stop – Documentation – 400V

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Generalna obnova 2025 Dodpfx Asd N S I Tshqekr Stroj s 6 postajami 4 prijemalci, 2 pomična podajalnika, Obdelava kuvert v formatih od DL do C4 Pomični podajalnik obdeluje material do 16 mm, posebna izvedba do 30 mm SPS krmiljenje, možna integracija bralnih sistemov, možna integracija spletnih sistemov

Leto izdelave: 1998, stanje: dober (rabljeno), številka stroja/vozila: 0159488169537, Offer 23293 Technical Data: - Pressing force: 300 kN - Punching capacity, e.g.: up to 30 mm Ø in steel 9 mm - or with special punching tool: up to 100 mm Ø in steel 2.5 mm - Stroke adjustable: 0 to 28 mm (stepless) - Strokes per minute: 26 to 36 1/min - Throat depth: 610 mm - Installation height: 240 mm - Drive: 400 V / 4 kW - Space requirement approx.: W 750 x H 1650 x D 1350 mm - Weight approx.: 1300 kg - Incl.: - Foot switch - Centre-point finder - Support table with foldable stops W 1100 x D 850 mm - Stop travel from centre of punch - Width between left/right approx. 470 mm x D 510 mm Djdpfxjpuy H Do Ahqskr

Leto izdelave: 2000, stanje: dober (rabljeno), Offer 20158 Technical specifications: - Thread tapping capacity up to approx. M16 - Thread tapping depth approx. 75 mm - Drilling feed up & down steplessly adjustable - Throat depth 90 mm - Spindle speeds up to 290 rpm - Pneumatic connection with pressure regulator 6 bar Dkodspvkm Tjpfx Ahqor - Pneumatic foot pedal - Drive 400 V / 0.75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Stanje: pripravljen za uporabo (rabljen), Na voljo je kompaktna parna kotlovska naprava Gebrüder Lödige. Prostornina kotla: 610 l, prostornina plašča: 45 l, največji delovni tlak kotla: 1 bar, največji delovni tlak plašča: 1,5 bar, največja delovna temperatura: 110 °C. Vključno s krmilno omarico. Možen je ogled na lokaciji. Predvidoma na voljo od junija 2026. Djdsyypmtepfx Ahqekr

Leto izdelave: 2025, stanje: pripravljen za uporabo (rabljen), A nearly new baguette long-roller machine for long-moulding dough pieces for baguette production is available. Table dimensions X/Y: approx. 1600mm/850mm, long-rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, maximum gap opening: 75mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Djdpfx Ajwihz Ijhqjkr

Stanje: novo, Sheet width 610 mm Sheet thickness 1.0 mm Frame opening 620 mm Top roller diameter 38 mm Total power requirement manual operation Machine weight approx. 40 kg Space requirement approx. 950 x 270 x 360 mm Sheet metal bending machine featuring: - Capacity 610 x 1.0 mm Dkedpfsupxi Tjx Ahqor - Swiveling top roller

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening width of clamps: 90 mm Min. panel dimensions fed from the rear: 1,830 x 915 mm Max. panel dimensions fed from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Dodpfxoxranpe Ahqokr Scoring saw blade diameter: 200 mm DIGISET: electronic setting of scorer to main saw QUICK CHANGE: fast blade swapping at the press of a button Saw carriage drive: 1 - 140 m/min. Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on pusher with double fingers 3 front aligners 16 roller support rails behind the machine table 4 air flotation tables in front of the machine, rounded, including movement unit for table 2 Automatic ejection of end pieces beyond cut line Material support surface below pusher with brush rollers, suitable for delicate surfaces Machine table with air nozzles for sensitive surfaces Automatic main saw blade control device consisting of a sensor to detect blade flexion and a system to measure main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine VERSION OSI PLUS INTERFACE OPTIPLANNING optimization software incl. hardware dongle, supports management of up to 10 users via network OS LABELLING: Graphic editor on the machine controller with piece drawing, real-time label printing possible MACHINE FEED SYSTEM COMMUNICATION - SELCO Industrial label printer on the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotatable suction frame 0 - 180 degrees with controlled axis Panel alignment system / angle correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted at the suction frame in the separating area, checks if the specific weight value matches the expected range for this panel type. If not, the panel is returned and the separation cycle restarts. Roller conveyor for stack loading/unloading 4,200 mm Software: LINE SUPERVISOR with stock mapping, catalogue, import of processing data from optimizer, management of parts lists, system control

Stanje: dober (rabljeno), Leto izdelave: 2014, Spinner MCV 1000, letnik 2014, krmiljenje Heidenhain TNC 620, hod X/Y/Z 1016/610/508 mm, menjalec orodij za 32 pozicij, vpenjanje SK 40, pripravljeno za notranje hlajenje, velikost mize 1200 x 500 mm, največja obremenitev mize 800 kg, hitrost vretena do 10.000 o/min, vpenjanje SK 40, transporter za ostružke, 4-čeljustna glava Ø 250 mm z čeljustmi, 3-čeljustna glava Ø 315 mm z čeljustmi. Dodpfx Aeyaqn Dshqokr

Stanje: rabljeno, Leto izdelave: 2023,