Tranzistorski impulzni pretvornik za trifazne pogone z analognim krmiljenjem; servo pogon

SIEMENS Simodrive 610 6SC6101-3A-Z

Leto izdelave: 1994, Stanje: pripravljen za uporabo (rabljen), Engine power: 15.5 kW / 19.5 kW, pressing force: 320 kN, specific pressure: 425 kN/m², machine dimensions (X/Y/Z): approx. 5700 mm / 1900 mm / 1800 mm, weight: approx. 6000 kg. The machine is malfunctioning due to moisture and should be inspected. Ndsdjip D Rpopfx Abpsd

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 20.580 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 48 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.250 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 450 kg, vhodni tok: 59 A, skupna masa: 12.000 kg, transportna višina: 2.750 mm, kapaciteta rezervoarja za olje: 300 l, moč: 30 kW (40,79 KM), transportna širina: 2.300 mm, transportna dolžina: 8.500 mm, kapaciteta rezervoarja: 300 l, Good day, Nodpfx Aet H Rcasbpjdd We are pleased to offer you, without obligation, a used baler manufactured by HSM, model VK 4812. The following technical data has been taken from the manufacturer's operating manual and brochures, for which we do not assume any responsibility for accuracy or completeness. Manufacturer: HSM Model: VK 4812 Year of manufacture: 2011 Operating hours: 20,580 hours Main press force: 48 t Drive power: 30 kW Machine weight (press): 12 t The machine documentation is available in German. An inspection can be arranged by appointment at our workshop. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 1975, Martin Miniline 616 - Vakuum-Zuführung - hhs-Leimsystem mit Leimkontrollsystem - Max. Geschwindigkeit: 24.000 St/h - Max. Format: 600 x 1.600 mm - Baujahr: 1975/1991 - 2-Farben-Flexodruck - Slotter (Schlitzaggregat) - Rotationsstanze - Falten und Verkleben Ndodpfxeq Nf D He Abpod - Zähl- und Ausstapeleinheit, Baujahr 1991

Stanje: pripravljen za uporabo (rabljen), približno 11 kosov = 44 tekočih metrov Ndsdpfx Aod Hapkobpjd Število vodnikov/polov: 4 V standardnih dolžinah: 4000 mm Za napetost omrežja do: 500 V Prerez zbiralke: 10 mm² Teža: 2 kg/m Obremenitev pri 100% ED: 60 A

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, dolžina bale: 1.000 mm, širina bale: 750 mm, višina bale: 750.750.750 mm, teža bale: 500 kg, vhodna napetost: 400 V, skupna masa: 7.500 kg, kapaciteta rezervoarja za olje: 500 l, moč: 30 kW (40,79 KM), lastna masa: 7.500 kg, vhodna frekvenca: 50 Hz, Manufacturer: Pal Pacomat V Year of manufacture: 1985 Main press force: 50 t Specific press force: 5 kg/cm² Feed channel: 1,000 x 720 mm (L x W) Theoretical throughput: 200 m³/h Bale size: 700 x 1,000 mm (W x H), length adjustable Ndjdpfx Abjic Rl Dspsd Drive motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8 t The hydraulic unit is functional, the drive motor is removed.

Stanje: nepreverjeno (rabljeno), Hydraulic press for compacting paper and similar materials. The machine was in working condition prior to disassembly. Press dimensions: Length: 4,850 mm, width: 1,370 mm, height: 3,000 mm (can be reduced to 2,300 mm). Weight approx. 3,500 - 4,000 kg. For further information, please contact: +48 539 660 495. Nsdpfxeh Nyfys Abpjdd

Stanje: zelo dobro (rabljeno), Storti RM 500 Edger - Made in Italy Nodpfx Ajk Talpjbpjdd - Year of manufacture: 1993 - Electrically adjustable sawblade spacing TECHNICAL SPECIFICATIONS: - Maximum cutting width: 435 mm - Maximum cutting height: 170 mm - Motor power: 2 x 22 kW - Maximum width of workpiece: 600 mm - Minimum workpiece length: 800 mm - Maximum blade diameter: 600 mm - Arbor diameter: 40 mm - Two upper feed rollers - One upper pressure roller - Roller drive motor power: 2 x 1.1 kW - Rollers with automatic pressure engagement - Seven lower toothed feed rollers - Electric adjustment of sawblades - Two lasers - Feed speed: 25 and 50 m/min - Infeed table: 2950 mm - Outfeed table: 3000 mm - Drive rollers diameter: 100 mm - Feed roller motor power: 2 x 1.5 kW Transport dimensions: 500 x 240 x 180 cm Weight: 3,500 kg

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, Ndodpfx Ajvgrh Uebpjd We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm: 0.3 / 3 Njded Nt Rqjpfx Abpjdd Edge thickness with strip veneer (min/max) mm: 3 / 10 Panel thickness (min/max) mm: 8 / 60 Working width (min/max) mm: 236 / 3300 Control / software: ICOS Open Feed speed (m/min): 10 - 50, No power transmission bar (master & slave systems) Retractable reference pins, distance (mm): 1080 FORMAT PROCESSING (per side): - Pre-milling cutter 75.186 (1 x kW 4.4) - Chipper (2 x kW 8) - Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (per side): - Gluing unit (hot melt glue) 283.1513 04.1570 + 283.205 - Edge pressure zone – edge magazine for rolls (compartment No. 6) - End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) - Milling unit 08.055 (2 x kW 1) 0° - 30° - Multifunctional unit (radius milling and contour milling unit) 08.342 (2 x kW 0.66) servo motor - Profile scraper unit 08.519 - Flat scraper unit 08.521 - Sprayer unit (for polishing agent) - Buffing unit 08.617-4 (4 x kW 0.18) - Universal milling unit for grooving/rabbetting and profiling 08.190 (1 x kW 4.5) 90°-180°-270°