Com Com Jd-240F-30 nakup rabljenega (32.544)

Leto izdelave: 2007, stanje: dober (rabljeno), Volume flow rate: 4.6 m³/min Maximum pressure: 10 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2 inch Operating hours: 8,000 h Includes compressed air dryer!!! Lredpfxei D D Nis Al Ret Space requirements (L x W x H): 1850 x 1050 x 1760 mm Weight: 910 kg Good condition

Stanje: novo, Leto izdelave: 2024, I am selling the new four-side planer LEADERMAC COMPACT 430, year of manufacture 2024. Exhibition machine! Configuration with 4 spindles: Bottom: 7.5 kW / 10.0 HP Right: 7.5 kW / 10.0 HP Left: 7.5 kW / 10.0 HP Top: 7.5 kW / 10.0 HP Feed speed adjustable from 6 to 24 m/min. Feed motor: 7.5 kW / 10.0 HP with inverter Maximum workpiece width: 15–300 mm Maximum workpiece height: 10–200 mm All 6 spindles: 6,000 rpm Schneider touch screen with EASYSET electronic programming for working width, working height, and pressure height. Pressure system for short workpieces. Three-zone pneumatic material pressure system for feed. Ljdpfx Aerfud Iol Rjrt Total weight: 4,000 kg Total power requirement: 39 kW / 52 HP Fully operational. Available immediately. Exhibition machine, completely NEW! Including CE marking and complete documentation!

Stanje: rabljeno, Leto izdelave: 2004, Pregled Ta stroj za etiketiranje s hladnim lepilom je bil izdelan leta 2004 pri nemškem podjetju KHS. Stroj je bil v uporabi do januarja 2025 in je sedaj skladiščen v podjetju. Etiketirni stroj je opremljen s kamerami za poravnavo varnostnih etiket za steklenice s preklopnim zamaškom. Lsdswhwwvspfx Al Rjrt Tehnični podatki - Zmogljivost: do 26.000 steklenic na uro - Smer delovanja: v nasprotni smeri urinega kazalca - Formati: - 330 ml Longneck steklenice - 330 ml Steinie steklenice - 330 ml steklenice s preklopnim zamaškom - 500 ml NRW steklenice - Pozicije etiket: - Sprednja stran (do 2 etiketi) - Zadnja stran (do 1 etiketa) - S Siemens S7 krmiljenjem - Nova HMI zaslonska plošča iz leta 2019

Stanje: novo, številka stroja/vozila: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideally suited for combustion in wood gasifiers as well as in smaller wood chip boilers and heating systems. Any material generated in a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, and more are by-products found in all craft and industrial enterprises within the woodworking sector. Enormous storage and transport costs are incurred daily for these materials. Briquetting presses offer an ideal solution, as briquettes are simple and space-saving to store and transport. Additionally, the risk of self-ignition is significantly reduced. The briquetting presses require little space, are robustly built, and feature low-maintenance technology. Whether wood, paper, biomass, foam, or Styrofoam – the ZBP can briquette any suitable material. With a throughput of up to 35 – 130 kg/h, they are especially suitable for small and medium-sized businesses. Lrjdpfxeyr I Hno Al Rjt

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.205 mm, skupna širina: 1.000 mm, skupna višina: 1.890 mm, REF: MM6147 30 nosilcev iz nerjavečega jekla za obešanje mesa pri sušenju, prejšnje uporabljeni za obešanje salame chorizo. Lsdpfox Tg Axox Al Rsrt Te nosilce je mogoče zložiti enega na drugega. Celotne mere: dolžina 1205 mm, širina 1000 mm, višina 1890 mm.

Leto izdelave: 1988, stanje: dober (rabljeno),

Stanje: novo, Leto izdelave: 2026, Standard Equipment - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Power cable with CEE plug - Mechanical Z-axis feed - Includes electromagnetic clutch for 3 feed rates - Drilling cross with push button - In thread cutting mode: Forward/Reverse (right/left) TECHNICAL DATA Continuous/standard drilling capacity (mm) R1 - 27/32 (in E335/ST60) (100) R2 - 25/30 (in E335/ST60) (70) R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R1 = M24x3, R2 = M20x2.5, R3 = M30x3.5 Spindle: MK III Drilling depth: 125 mm Throat: 300 mm Column diameter: 125 mm Usable table area (W x D): 590 x 450 mm Digital speed display Digital drilling depth display Fine adjustment drilling depth stop Table height adjustment with rack Spindle/table: 150-700 mm Stepless spindle speeds: R1 (single stage) 0-1,000 rpm R2 (single stage) 0-1,600 rpm R3 (2-stage with intermediate gear) 0-4,000 rpm Choice of R1 or R2 at no extra charge Price surcharge R3: €1,700 Optional Coolant Unit (€620) - Separate tank - Filling capacity: max. 15 L - Delivery rate: max. 13.4 L/min Optional Drill Package 5 (€875) - Vice [felix] 2.0 150 - Morse taper arbor MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to site incl. packaging NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN SUPPLY ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST A QUOTE! Ledpfx Alsfmh Tlj Rert

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Dryer Wittmann Drymax C30 - 30-P Ljdsumnknepfx Al Rort Year of manufacture: 2004 Feeding units year: 2005 Available: 2 units

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Rondo, stroj za valjanje testa HD 3000. Ljdpfxot Twp Hj Al Rsrt

Stanje: rabljeno, Leto izdelave: 2010, Overview This bottle washing machine ARCADE GEL 6 was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and is being replaced due to an increase in production capacity. Technical Details Nominal capacity: 33,000 bottles/hour Adjustable range: 13,200 – 36,300 bottles/hour Chain pitch: 169 mm Cell pitch: 110 mm Bottle cells per row: 30 pcs Total bottle cells: 7,860 pcs Bottle cells, loaded: 7,680 pcs Consumption Compressed air: 1 m³ Steam (operation): 489 kg/h Steam (heating up): 4,430 kg/h Electrical power: 48.4 kW Lodpfx Alet Ul Exs Rort Water: 7.35 m³/h Tank volumes Pre-soak: 2,263 l Caustic pre-rinse: 7,240 l Caustic tank 1: 31,755 l Caustic tank 2: 350 l Hot water tank 1: 350 l Hot water tank 2: 350 l Cold water tank: 350 l

Stanje: novo, Leto izdelave: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Ledpfoh D If Hex Al Rjrt Suction inlet: 300 mm Rated motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum airflow: 6,000 m³/h Rated airflow: 5,089 m³/h Negative pressure: 2,587 Pa Filter surface area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting output: 30 - 50 kg/h Briquette diameter: 50 mm Weight: 1,570 kg This machine is brand new in our stock – IMMEDIATELY AVAILABLE – Subject to prior sale Location: 54634 Bitburg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM), Čeljusni drobilnik za drobljenje kamna in rude v kamnolomih ter rudarskih obratih Model: PE600X900 Največja vhodna velikost: 500 mm Zmogljivost: 80–135 t/h Motor: 75 kW Teža: 15 t Poleg tega modela so na voljo tudi drugi modeli, kot so PE900X1200, PE500X750, PE250X400, PE400X600 itd. Na voljo imamo tudi udarni drobilnik, konusni drobilnik, kladivni drobilnik, drobilnik tipa VSI ter – kar je najpomembneje – lahko zagotovimo celotne obrate za drobljenje in separacijo kamnin s kapaciteto od 30 do 1.000 t/h. Za dodatne informacije ali povpraševanje po drugih modelih oziroma vrstah drobilnikov nas kontaktirajte. Če potrebujete drugačen model ali drug tip drobilnika, nam lahko tudi pošljete sporočilo. Ljdoq H Shcepfx Al Rsrt

Stanje: generalkompletno obnovljen (rabljeno), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 SP. 150 mm Composition: - LOADER Lredpfxsn R Diho Al Rjt - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 SP. 150 mm - GRAVITY ROLLER UNLOADER, 3000x1300 mm Press platen dimensions: 3000x1300 mm Pressing pistons: No. 6, Ø 70 mm, stroke 200 mm Pressing force: 70 t

Stanje: dober (rabljeno), 12-head drilling machine for sale, Lsdopy D Dwepfx Al Rert Table size: 400 x 360 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, ABB IRB260-30/1.5, samo robot; 20-odstotni popust ob naročilu več kot enega robota. Ljdpfxezxbnqs Al Rort RAZVOJ PODJETJA GSG ROBOTICS GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marlu od leta 2015 in pokriva obsežno območje storitev za vzdrževanje in popravilo robotov. Skozi leta smo se razvili v celovitega partnerja pri vseh vprašanjih, povezanih z industrijskimi roboti in tehnologijo avtomatizacije. Ponujamo celoten nabor storitev za dva priznana proizvajalca robotov, ABB in Fanuc.

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 662 h, dvižna višina: 4.600 mm, vrsta goriva: električni, proizvajalec motorjev: Elektro, vrsta prenosa: samodejen, Električni viličar Still RX60-30/600L, leto izdelave: 2021, delovnih ur: samo 662 ur!, prejšnji lastnik: Nemška vojska, nazivna nosilnost: 3.000 kg, višina dviga: 4.600 mm, dolžina vilic: 1.800 mm, tehtnica, stranski premik, tristopenjski jambor, prosti dvig, osvetlitev v skladu s STVZO, vključno z napajalnikom, dobro stanje!, takoj pripravljen za uporabo! Lodpszwlx Djfx Al Rert Na zahtevo vam bomo pripravili ponudbo za lizing ali financiranje. Gospoda Mihma lahko kontaktirate na telefonski številki, kjer vam bo z veseljem pomagal. Dodatne informacije najdete na naši spletni strani. Pridržujemo si pravico do sprememb in napak! Servo volan, zaščitni lok = Dodatne informacije = Nosilnost: 3.000 kg Višina: 225 cm Za dodatne informacije se obrnite na Tobiasa Eberta.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold anodized platens Touch display control - Electric heating platens: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm - Opening height: 350 mm - Loading possible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW - Electric heating platens made of solid hard aluminum with integrated heating wires - Heating capacity: 22 kW - High-pressure insulating panels - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Meets CE safety regulations Standard features: - Movement of the press table via rack-and-pinion and parallel guides on 2 corners of the press table made of self-lubricating material - Electronic control unit with touchscreen for machine control and monitoring - Digital timer for pressing time setting and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for pressing time selection - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety support for lower press table Integrated accessories: - Touch Screen TS/400 - EFC Electronic flatness control - Gold anodized heating platens (Busse) Lrjdpjdx R Tfsfx Al Rjt Location: Ex stock 54634 Bitburg - Immediately available -

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), Opis Novi noži in proti-noži z odsesalnim sistemom HS-40/SL-SP Tehnični podatki Proizvajalec: TRIA Model: BM 50-30 Lredpfx Aozwwdxol Rot Letnik izdelave: 2005 Stanje: Rabljeno Številka izdelka: AI2182

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, format saw with side carriage, in full working condition Lsdpjfv Hphefx Al Rert

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, 5-osno obdelovalni center | Proizvajalec: MATEC | Tip: 30 HV | Letnik: 06/2008 Spekter obdelovalnih delov: jeklene, litoželezne in varjene konstrukcije. Velika os X in glava, ki se lahko vrti za 105° na obe strani, sta idealni za večstransko obdelavo dolgih profilov ali gredi. Stroj si lahko ogledate pod napetostjo po dogovoru o terminu. Stanje: deluje / pripravljen za uporabo. Delovne ure (07.09.2026): Vklopljen nadzor: 76.085 Vklopljen stroj: 62.198 Trajanje programa: 26.653 TEHNIČNE SPECIFIKACIJE Poti gibanja: - Os X: 3.000 mm - Os Y: 800 mm - Os Z: 1.100 mm - Os A: +/- 105° - Os B: 360° - 1-osna NC vrtljiva glava, vrtljiva za +/- 105 stopinj - Območje vrtljajev: 20 - 9.000 vrt/min - Povečana moč pogona motorne vretena: 30 kW * Največji navor: 190 Nm * Kapaciteta vrtanja v jeklu: približno 60 mm * Kapaciteta frezanja: približno 500 cm3 * Rezkanje navojev: M30 OPREMA: - CNC krmilnik: HEIDENHAIN iTNC 530 - NC rotacijska miza, proizvajalec: KESSLER, vgrajena v mizo stroja, SKH-NC 6/800 * Vodoravna rotacijska miza, premer: 800 mm * Neposreden merilni sistem za NC rotacijsko mizo * Natančnost pozicije: +/- 12" * Največja nosilnost: 2,5 t * Največji tangentni navor s pritrdilom: 6.500 Nm, vključno z motorjem (AC) z vgrajenim rotacijskim merilnim sistemom ter hidravličnim pritrdilom in dodatno CNC osjo - Pritrdilna plošča: Širina / Dolžina: 835 / 3.500 mm Število T-utorov: 7 Širina utora: 18-H8 - Ampermeter pogona glavne vretene - Magazin za orodja: 48 mest - Dodatni magazin za orodja: 48 mest, vključno z menjalnikom orodij, specializirano programsko opremo in upravljalno ploščo za nalaganje orodij, medtem ko stroj deluje v avtomatskem načinu - Delovni prostor: * Hitri pomik: 30 m/min * Pomik: 30.000 mm/min - Vreteno: * Stožčasta povezava/ vpenjalna glava: SK40, DIN 69871 * Vrtljaji: 9.000 / 30 kW - IKZ / Notranji sistem za dovod hladilnega sredstva 40 bar (filter za papirnate trakove, prostornina rezervoarja: 450 l) - Visok tlak hladilnega sredstva na zunanjih šobah Črpalka za visok tlak hladilnega sredstva, ki jo je mogoče preklapljati s funkcijo M v programu dela, na zunanji šobi na vretenčni glavi, 20 bar. - Nadzor pretoka hladilnega sredstva - IK-stisnjen zrak skozi orodje - Centralno mazanje z oljem - Sistem za sesanje oljne meglice - Neposreden merilni sistem osi X, Y, Z - 3D tipalo, proizvajalec: RENISHAW RMP 60, z brezžično prenosom signala na krmilnik, vključno z programsko opremo za krmilnik - Nadzor za prekinitev orodja Lrodjzyy Rmjpfx Al Rst - Merjenje dolžine orodja - Popolna zaščita delovnega prostora z nadstreškom, popolnoma zaprt delovni prostor. Vrata za nalaganje so zasnovana tako, da omogočajo nalaganje s žerjavom v odprtem stanju kadar koli. - Zaščitna ograja, pritrjena na stroj - Močnejše linearne vodila za os Y = 800 mm X = Gr. 65, Y + Z = Gr. 55 - Zložljiva zaščita s jeklenimi lamelami - Pralna pištola - Elektronsko ročno kolo (prenosno), proizvajalec: HEIDENHAIN HR 410 - Transportni sistem za odrezke - Razsvetljava delovnega prostora (2-krat) - Sesalni sistem - Sušilnik stisnjenega zraka - Zaščitni zasloni/zasloni stroja bodo obnovljeni - Dokumentacija - CE oznaka Posebnosti: - Sistem za pritrditev na ničelno točko - Vrtljiva glava - NC rotacijska miza v kombinaciji z vrtljivo glavo omogoča 5-stransko ali 3D obdelavo obdelovancev Prodaja ne vključuje pritrdilnih orodij. Brez jamstva za popolnost in pravilnost tehničnih podatkov in opreme. - Pridržana pravica do predčasne pro

Stanje: rabljeno, številka stroja/vozila: 008412, Vrsta nameščenega roba: tanek rob, debel rob Lrjdpsyilxmofx Al Rjt Lepilni sistem: PUR Multifunkcijska enota: da Stroj za lepljenje robov: Stroj 1 in 2 Maks. podajalna hitrost: 40 m/min Delovne enote, desna stran: 11 kos Delovne enote, leva stran: 11 kos

Stanje: rabljeno, Leto izdelave: 2014, moč: 30 kW (40,79 KM), WEIMA WLK 800 – 30 kW – drobilnik z eno gredjo – 2014 Naprodaj: profesionalni drobilnik WEIMA WLK 800 z eno gredjo, izdelan s strani priznanega nemškega podjetja WEIMA Maschinenbau GmbH. Stroj je zasnovan za drobljenje različnih vrst materialov in industrijskih odpadkov. Serija WLK ima robustno konstrukcijo, zasnovano za neprekinjeno delovanje v reciklažnih in proizvodnih obratih. Tehnične specifikacije: • Proizvajalec: WEIMA Maschinenbau GmbH, Nemčija Ledpfxozv Th Rs Al Rert • Model: WLK 800 • Letnik proizvodnje: 09/2014 • Serijska številka: 510-1282 • Širina rotorja: 800 mm • Moč motorja: 30 kW • Napetost: 400 V • Frekvenca: 50 Hz • Nominalni tok: 70 A • Hitrost rotorja: 90 vrt/min • Teža stroja: pribl. 2,8 t • Označeno s CE Uporaba WEIMA WLK 800 se lahko uporablja za drobljenje, med drugim: • plastike, • materialov PE, PP, HDPE in LDPE, • plastičnih cevi in profilov, • proizvodnih odpadkov, • lesa in lesnih materialov, • embalaže, • posod in zabojnikov, • drugih industrijskih odpadkov, ki so primerni za drobljenje z eno gredjo.

Stanje: rabljeno, Leto izdelave: 2009, Numerical Control POWER CONTROL PC 22 Machine suitable for the first and second panel pass Mobile motorized shoulder opening via NC, 3000 mm Maximum panel height: 60 mm PVC-ABS edge thickness: 3 mm Feed speed: 40 m/min Feed speed with corner rounding: 20 m/min Motorized rubber pressure belt Support rail with retractable pin (distance between pins: 500 mm) Squaring section consisting of: Non-stick unit Lsdjpp Tkfepfx Al Rsrt Time-controlled automatic chip guard unit Double trimming unit Space reserved for future group extensions Gluing unit with pre-melter and glue pot Automatic adjustment of pressure rollers for edging Edge holder magazine with 2 positions Trimming unit with two motors Overlapping cut-off unit Corner rounding group (FK) Scraper unit for edges Glue scraper unit Buffing unit Non-stick unit

Stanje: rabljeno, Plate turning device for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm Lredpfxorzhfpo Al Rst * Maximum panel length: 3200 mm * Rotation system: double-cone * Rotation direction: from crosswise to lengthwise This device is frequently used in the woodworking and furniture industries to facilitate the handling of panels during processing. If you have any questions or require further information, please do not hesitate to contact us!

Stanje: rabljeno, Vertical machining centre, ideal for the production of kitchen doors, for pantographing, drilling, cutting and the integration of highly flexible hardware. The vertical processing allows this series of machines to operate with a high level of flexibility, productivity and quality. In addition, the automatic loader and the automatic return/rotation of the panel make it fully automated. • TPA machine programming and control system with Windows-based PC - Computer, keyboard and mouse - 15" monitor - CD-ROM Ljdpfx Asux Si Hjl Rert The production line consists of the following machines: 1. Motorised comb-type multi-position input transfer - Length: 2000 mm 2. Bremen Vektor vertical machining centre - Automatic infeed via motorised chain and vertical pressure rollers for clamping the workpiece during machining - Automatic working height adjustment by CNC - No. 1 horizontal drilling unit for the hole for the stop insertion - No. 1 drilling head with 7 horizontal spindles in X and 16 vertical spindles in Y - No. 1 power take-off with automatic revolver-type tool changer with 8 positions 3. Motorised panel handling/return with 180° rotation and sliding on THK guides - Length: 2500 mm 4. Bremen Vektor vertical machining centre - Automatic infeed via motorised chain and vertical pressure rollers for clamping the workpiece during machining - Automatic working height adjustment by CNC - No. 5 storage tanks and automatic insertion of hinges/buffers/tie rods 6. Motorised transfer for discharge and panel movement from vertical to horizontal orientation for the operator - Length: 2000 mm 7. Motorised belt transfer for panel return to the operator • Perimeter safety fence