Cnc Prilagodljiv Vrtalni Stroj nakup rabljenega (32.975)

Stanje: rabljeno, Leto izdelave: 2009, hitro pomikanje X-os: 32 m/min, skupna višina: 2.250 mm, skupna dolžina: 4.295 mm, skupna širina: 2.575 mm, skupna masa: 8.800 kg, POS PosMill Tip 1100 3-osni CNC rezkalni stroj Vertikalni CNC obdelovalni center s strojnim omizjem pribl. 1.050 x 600 mm. Opremljen s CNC krmiljenjem HEIDENHAIN TNC 430. Avtomatski menjalec orodja. Oprema: hladilni sistem z notranjim hlajenjem orodja (IKZ), hidravlični sistem in transporter ostružkov. Osni pomik Y-os: 600 mm Dimenzije vpenjalne površine: 1050 x 600 mm Hitri pomik: 32 m/min Ksdpsy S Nifefx Ah Uelt Osni pomik Z-os: 510 mm Osni pomik X-os: 1100 mm Dimenzije (DxŠxV) pribl.: 4295 x 2575 x 2250 mm Teža pribl.: 8.800 kg Krmiljenje: HEIDENHAIN (serija TNC) Hitrost brusilnega vretena: 10.000 vrt/min Leto izgradnje: 2009 Stanje: delujoč Plačilni pogoji: 100 % predplačilo pred prevzemom Dobavni pogoji: iz temeljev Pod napetostjo: Da

Stanje: rabljeno, Leto izdelave: 2011, skupna višina: 3.000 mm, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna masa: 7.800 kg, POS PosMill tip C1050 – Univerzalni rezkalni stroj z gibljivimi potmi X 1.050 mm / Y 530 mm / Z 630 mm in velikostjo mize 1.150 x 560 mm. CNC krmiljenje HEIDENHAIN iTNC 530. Hidravlični sistem za natančna gibanja. Oprema: sistem za hlajenje in odvajanje ostružkov. Stroj ima zaščitne naprave in sistem za izklop v sili. Kledoy S Nh Ijpfx Ah Uot Hod osi Y: 530 mm Dolžina mize: 1.150 mm Dimenzije (D x Š x V) pribl.: 4.200 x 2.500 x 3.000 mm Teža pribl.: 7.800 kg Hod osi Z: 630 mm Hod osi X: 1.050 mm Krmilnik: Heidenhain iTNC 530 Dimenzije vpenjalne površine: 1.150 x 560 mm Leto izdelave: 2011 Stanje: nepreverjeno Plačilni pogoji: 100 % predplačilo pred prevzemom Dobavni pogoji: iz temelja Pod napetostjo: ne

Stanje: rabljeno, Leto izdelave: 2001, skupna masa: 3.350 kg, skupna dolžina: 2.100 mm, skupna širina: 2.000 mm, skupna višina: 2.300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510 sa Charmilles upravljačkom jedinicom. Hodovi osa X/Y/Z: 500 x 350 x 400 mm. Opremljena sa Erowa steznim čašicama, Erowa ITS rotacionim menjačem (24-pozicija), ManoSet XL i obimnim paketom steznih alata. Uključuje dodatni sistem za ispiranje, izmenjivač toplote voda/voda i uređaj za hlađenje vode. Dokumentacija dostupna. Polovna, ispravna mašina.Priključak 3~ / 400 V / 50 Hz, snaga 10 kVA, struja 15 A.Automatsko zatezanje žice, precizno vođenje žice, stabilna konstrukcija.Operaterska konzola (Siemens), zaštitne naprave, dugme za hitno zaustavljanje. Kjdoy S Axtopfx Ah Ujlt

Stanje: dober (rabljeno), Nagel Citoborma 290AB vrtalnik za papir Stroj je 100 % delujoč in pripravljen za uporabo. Robustna konstrukcija – teža 200 kg. To je aktualni model vrtalnika Citoborma, ki je še v proizvodnji. Napajanje 400 V. Dva vrtalna glava z nastavljivim razmakom od 45 do 170 mm. Premer svedra: 2–20 mm. Višina kupa: 60 mm. Upravljanje z električnim nožnim pedalom. Ksdpfey Tu H Eex Ah Uelt Odpadki se odvajajo v zunanjo cev. Vrtalna miza je nastavljiva v vse smeri (stransko, naprej/nazaj) in ima omejevalnike za nastavitev razmika med svedri (nestandardno vrtanje). Poleg tega je v mizi nameščen poseben modul za standardne razmake. Miza ima dodatno dve premični robni letvi. Vrtalnik ima avtomatsko sprostitev blokade mize po vsakem delovnem ciklu, kar omogoča premik mize v naslednji položaj. Komplet vsebuje vrtala, orodje in navodila za uporabo.

Stanje: dober (rabljeno), Nagel Citoborma 480AB Vrtalnik za papir Stroj je v zelo dobrem stanju. Ima štiri vrtalne glave. Tehnične specifikacije: Razdalja med svedri: 45-285 mm Premer svedra: 2-20 mm Višina kupa: 60 mm Teža: 275 kg Samodejen vrtalni cikel, upravljan s stopalko in ročnimi gumbi. Robustna konstrukcija na podstavku. Vrtalna miza nastavljiva v vseh ravninah. To je eden najnovejših modelov Citoborma. Vključuje obratovalno orodje, navodila ter novo rezilno palico in svedre. Klsdsy Tu Hrspfx Ah Uot

Stanje: dober (rabljeno), Nagel Citoborma 490 vrtalnik za papir To je največji Citoborma vrtalnik, ki je trenutno v proizvodnji. Klodpfx Asy Tu Hloh Ujt Zelo dobro ohranjen, pripravljen na delo. Stroj ima 4 vrtalne glave. Odpadek od vrtanja se odvaja v košaro na zadnji strani stroja. Stroj se upravlja s stopalko ali z dvema ročnima tipkama. Vsaka glava ima ločeno nastavitev dviga/spusta, kar omogoča uporabo vrtalnih svedrov različnih dolžin. Komplet vključuje rezervne svedre, orodje in navodila za uporabo. Tehnične specifikacije: Število vrtalnih glav: 4 (vsako glavo se lahko hitro odstrani) Največja višina kupa: 60 mm Premer vrtalnega svedra: 2-10 mm Nastavljiv razmak: 45 – 425 mm Dve hitrosti vrtanja Napajanje: 380V Teža: 365 kg Izdelano v Nemčiji.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, obratovalne ure: 5.290 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.800 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x4, velikost pnevmatike: 10-16.5, gorivo: dizel, vrsta prenosa: hidrostat, število sedežev: 1, tip droga: prosto dvigalo s teleskopsko roko, Oprema: dodatne luči, hidravlika, nastavljivo podvozje, pogon na vsa štiri kolesa, spojka prikolice, zapora diferenciala, Authorized SUBARU dealer in Łaziska Górne presents a unique Sandvik Tamrock 120R Command drilling rig. Kodpfx Ajy Tn Ezoh Ujlt This accident-free machine, maintained regularly by its first owner, is equipped with a powerful CAT engine. Technical condition is excellent, featuring new tires and a professionally refurbished finish. Ready for immediate operation, this rig is an ideal choice for companies seeking reliable rock drilling solutions. Numerous spare parts, full documentation, and four 3-meter drill rods come with the equipment. The Tamrock Commando 120R (currently produced and developed under the Sandvik Commando DC120 brand) is an extremely agile, self-propelled, hydraulic surface drill rig. Designed for operations in tight areas and difficult terrain, it is perfect for foundation work, trenching, and quarry applications. Key technical specifications: - Drilling diameter: 22 to 45.0 mm. - Hydraulic hammer: RD106 model, 5.5 kW, 82 Hz impact frequency. - Engine: 4-cylinder Caterpillar C2.2 (Tier 3), 37 kW at 2800 rpm. - Drive and maneuverability: 4-wheel drive (4WD) system, excellent stability and capability for rough terrain. - Control (R-version): Remote radio control (wireless transmitter) for both driving and drilling functions. Transport dimensions: - Length: 4.5 m - Width: 1.80 m - Height (with mast): approx. 2.0 m - Total weight: approx. 2800 kg - Compressor capacity (air flushing): 1.2 m³/min at up to 8 bar - Boom reach (DB 120 HD boom): Provides 10 m² drilling coverage from one surface setup Equipment: - New tires - Original paintwork - Accident-free - 5,290 operating hours - Equipment from the first owner Inspection report: The Sandvik Tamrock 120R drill rig is fully operational and ready for immediate use. It has only been used by one company and regularly serviced. No hidden defects. The listed price is net and applies to export and business customers. Significant discounts possible for private customers—feel free to contact us directly by phone to get your best deal :-) _____ After price negotiations, for seriously interested clients, we can provide a detailed video presentation or perform computer diagnostics or paint thickness measurements, allowing you to confidently purchase the machine remotely.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Horizontalna vrtalna naprava UNION T110 Leto izdelave: 2001 Pomiki: X 1500 Y 1250 skupna nastavitev višine 0 mm najnižji položaj sredine vretena do zgornje površine mize Z 1000 W 550 (gibanje vretena) B 360° brezstopenjsko Premer vrtalnega vretena: 110 mm Število prestav: 2 Maks. število vrtljajev: 4000 1/min Hitri pomik: 15 m/min Ksdpey Rpm Uefx Ah Ujlt Orodno vreteno: SK 50 Vpenjalna površina mize: 1000 x 1250 Širina T-utorov: 22 mm Višina vpenjalne površine nad tlemi: 1050 mm Maks. obremenitev mize: 6 t Skupna teža komplet: ca. 13,5 t Krmiljenje: Heidenhain TNC 426 Elektronski ročni kolesni regulator Različna držala orodja se lahko dokupijo

Stanje: rabljeno, WEBO gang drilling machine with 4 stations, model B 20 Serial numbers: 376/13; 376/14; 376/27; 376/36 Year of manufacture: approx. 1970 Klsdpfxeihmwtj Ah Ujt Drilling capacity: 20 mm Spindle taper: MT 2 – extended quill Headstock distance: 335 mm Throat depth: 260 mm Quill stroke: 190 mm Table size: 350 x 1500 mm Distance spindle/table: min. 30 mm / max. 700 mm Spindle speeds, drilling head 376/13: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Spindle speeds, drilling head 376/14: 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm Spindle speeds, drilling head 376/27: 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm Spindle speeds, drilling head 376/36: 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm Motor power: 1.1 / 1.3 kW Electrical connection: 380 V, 50 Hz - Spindle speed via 2 motor speeds and 4-step V-belt drive - Drilling head height adjustment via rack and pinion and hand crank approx. 300 mm - Height-adjustable drilling table approx. 350 mm Required floor space (L x W x H): 1750 x 1100 x 1900 mm Weight: 1900 kg In good condition

Stanje: rabljeno, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Klodpfx Aed Rmcmjh Uot Machine - Defective - without control unit Machine not operational - no electrical function - without CNC control unit Serial No.: Year of manufacture 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Centre distance 700 mm Centre height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control unit dismantled Space requirement (L x W x H) 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control unit missing. Mechanically in good condition, ideal for CNC retrofit Can be used as a source of spare parts or for refurbishment with a new control unit.

Stanje: rabljeno, Column-type box stand drilling machine WEBO Serial No: 132 Machine No: 9 Drilling capacity: 50 mm Spindle taper: MK 5 - long quill Throat depth: 430 mm Spindle stroke: 280 mm Kljdpfsqa Txqsx Ah Uot Drill head height adjustment: 500 mm Table size: Ø 725 mm Distance spindle to table: max. 740 mm Distance spindle to mounting surface on machine base: max. 1240 mm Spindle speed: 55-820 rpm Feed rate stage 1: 0.13 - 0.2 - 0.27 - 0.4 mm/rev Feed rate stage 2: 0.6 - 0.83 - 1.17 - 1.8 mm/rev Column diameter: 300 mm Motor power: 2.8 / 3.6 kW, pole-switchable Power supply: 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and stepless variator - Manual drill head height adjustment by hand crank, locking via clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment by hand crank - Mounting surface at machine base: 600 x 550 mm Drill head height top: 3020 mm Drill head height bottom: 2520 mm Required space (L x W x H): 1400 x 780 x 2520 mm Weight: 1600 kg Good condition

Stanje: rabljeno, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of manufacture: 1996 CNC path control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface): 1010 x 400 mm Table size (with coolant groove): 1120 x 500 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Kljdetrhq Hepfx Ah Uet Overhang: 450 mm Spindle speed: 80 to 8,000 rpm, infinitely variable Feed rate: 3 to 16,000 mm/min Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Power supply: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool stations - Full safety enclosure with sliding door - Swiveling control panel - Spindle drives Yaskawa (Japan) - Pneumatic-mechanical tool clamping - Coolant system on the side, pushed in from the rear - Chip tray flushing Machine width: 2400 mm Transport dimensions L x W x H: 3400 x 2400 x 2550 mm Weight: approx. 4800 kg Good condition

Stanje: rabljeno, Radial drilling machine with platen table WEBO type HRH 100 / 3000 Machine no. 10009555/7 -- 1110185 -- 6046 Year of manufacture: 1979 Drilling capacity Ø 100 mm in ST 60 at feed 0.5 mm/rev Nominal arm reach 3000 mm Maximum arm reach max. 3100 mm Spindle taper MT 6 Spindle speed 22.4 - 1600 rpm, 36 steps Kodsfbt Hujpfx Ah Uolt Feed 0.05 - 2.5 mm/rev, 18 steps Distance spindle - base plate 970 - 2335 mm Quill stroke 325 mm Boom swing range 360° Travel on bed, bed length 7500 mm Clamping surface of platen field 8000 x 2100 mm - Electric central clamping - Drilling unit movable longitudinally on the machine bed by electromotor - Platen field made of 2 clamping plates with 7x T-slots (length 4000 x width 2100 x plate thickness 360 mm) Required space (L x W x H) 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 t Transport dimensions platen field (L x W x H) 4000 x 2100 x 900 mm (2 plates stacked) Transport weight platen field approx. 14 t Good condition

Stanje: rabljeno, CNC Press Brake FASTI Type 904-125/30 Serial No. 95-904-5775 Year of manufacture: 1995 Press Force: 125 tons Working Length: 3050 mm Stroke: approx. 335 mm Throat Depth: 300 mm Clearance Between Side Frames: 2550 mm Tool Installation Height: max. 465 mm (opening width between tool holders) Table Width: 90 mm (clamping system mounted on the table) Table Height Above Floor: 875 mm (910 mm with clamping system) Backgauge X-Axis Travel: 500 mm Backgauge R-Axis Travel: 115 mm Backgauge Z-Axis Travel: approx. 1950 mm Y Rapid Down Speed: 90 mm/s Y Working Down Speed: 8.9 mm/s Y Return Speed: 75 mm/s Oil Capacity: approx. 160 liters Motor Power: 18.5 kW Power Supply: 400 Volt, 50 Hz, 20 Amp. Ksdpfehmmfksx Ah Uslt - 7-axis CNC control DELEM Type DA 58 with LCD screen - 1 axis for backgauge – depth positioning (X axis) - 2 axes for backgauge – height positioning (Finger R1 + Finger R2) - 2 axes for backgauge – lateral finger positioning (Finger Z1 + Finger Z2) - 2 axes for press beam with servo valves and measurement system Y1 and Y2 - Operation via electric foot switch and two-hand control panel or two-hand control only - Hydraulic tool clamping for upper tool, TRUMPF system, with 20 mm clamping groove - Hydraulic tool clamping for lower tool with 13 mm table groove, 21 mm depth (tool shank 13 x 20 mm) - FIESSLER type AKAS safety light curtain - 2 manually movable, height-adjustable front support arms - Electrical diagram, hydraulic diagram, and control user manual included - Control cabinet mounted on the machine - Delivery without tools Space required (L x W x H): 5000 x 2500 x 3050 mm Transport dimensions (L x W x H): 5200 x 1900 x 2950 mm Weight: 8.5 tons In good condition

Stanje: rabljeno, CNC Milling Machine DECKEL Type FP 3 A Toolroom milling machine with handwheels, suitable for both CNC and manual operation Serial No. 2206 – Year of manufacture: 1982 CNC Contour Control GRUNDIG CNC 2101 Kledpev R E Rdofx Ah Ust Travel paths: X: 490 mm, Y: 300 mm, Z: 340 mm Table size: 705 x 425 mm Spindle taper: SK 40 Quill stroke: 100 mm Spindle speed: 25 – 2500 rpm, 21 steps Feed rate: 5 – 500 mm/min, stepless Rapid traverse speed: 1200 mm/min Spindle drive motor power: 2 / 4 kW, pole-changing Power supply: 380 Volt, 50 Hz - CNC contour control GRUNDIG CNC 2101 - Mechanical handwheels on all three axes - Universal swivel/tilt rotary table - Vertical milling head tiltable and manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Front and side protective enclosure with 3 folding doors - Free-standing control cabinet (L x W = 600 x 430 mm) Space requirement (L x W x H): 1900 x 1700 x 1950 mm Weight: 1700 kg (Machine 1540 kg + electrical cabinet 160 kg) Very good condition

Stanje: rabljeno, CNC vertikálne obrábacie centrum HURCO typ BMC 25/M Výrobné číslo: ZB9-001-052 Rok výroby cca 1995 Pojezdy X: 610 mm, Y: 410 mm, Z: 560 mm Rozmer stola (upínacia plocha): 845 x 400 mm Rozmer stola (s chladiacou drážkou): 1050 x 500 mm Upínanie vretena: SK 40 Vzdialenosť čela vretena od stola: 155 – 710 mm Zaťaženie stola max.: 500 kg Vyloženie: 420 mm Otáčky vretena max.: 10 000 min⁻¹ Posuv: 3 – 5 080 mm/min Rýchloposuv: 10 m/min Pohon vretena: cca 5,5 kW Elektrické pripojenie: 400 V, 50 Hz - CNC riadenie dráhy Ultimax 3 s dvoma TFT monitormi - Elektronické ručné koliesko - Nepriame meracie zariadenie s rotačnými snímačmi na guľovej skrutke - Zásobník nástrojov s 20 pozíciami - Kompletná ochranná kabína s posuvnými dverami Ksdpfx Ahow Nklho Uolt - Otočný ovládací panel - Pohony vretena Yaskawa (Japonsko) - Pneumatické mechanické upínanie nástrojov - Bez chladiaceho zariadenia – čerpadlo je súčasťou, chýba chladiaca vaňa Šírka stroja: 2 400 mm Prepravné rozmery (d x š x v): 3 000 x 2 400 x 2 650 mm Hmotnosť: 4 200 kg V dobrom stave

Stanje: rabljeno, CNC Tool Milling Machine MIKRON Type WF 40C/3M Kjdpfxsw A Af Io Ah Uslt with Heidenhain TNC 310 CNC path control Machine no. 440911 Year of manufacture: approx. 1985, Overhauled and control system retrofit in 11/2000 Travel paths X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min.; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Mains connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - Heidenhain TNC 310 CNC path control, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (readout) - Control cabinet fixed to the machine rear - Coolant system in machine base - Swiveling operator panel - Electrical diagram, operator's manual for the control system available Required space (L x W x H) 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Stanje: rabljeno, CNC Milling Machine ABENE Type VHF-360TI Serial No. 36084 Year of manufacture: 2008 CNC Control: HEIDENHAIN TNC 320 Travel Ranges X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle taper SK 40 Spindle speed 55 - 3000 rpm, 2 ranges Feed rate 30 - 4000 mm/min, infinitely variable Rapid traverse speed (X + Y axes) 4000 mm/min Rapid traverse speed (Z axis) 2000 mm/min Distance spindle nose to table 20-495 mm Spindle drive motor power 7.5 kW Electrical connection 400 V, 50 Hz - CNC path control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - Mechanical handwheels for X and Y axes - Spindle speed manually shiftable in 2 gear stages (Stage 1 = 55-700 rpm) + (Stage 2 = 701-3000 rpm) - Inclined bed design with laterally mounted swivel spindle head +/- 50° - Inclined bed adjustment manually via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with separate electric coolant pump - Machine lamp - Control cabinet fixed to machine Kjdpfx Ahety A Ehj Ujlt - Read operating hours controller on = 14,780 hrs - Read operating hours machine on = 12,980 hrs - Read operating hours program run = 400 hrs Space requirements L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Data: Spindle taper: MK 5 Drilling capacity in ST60: 50 mm Infinitely variable speed ranges approx.: 40 – 180 rpm + 180 – 800 rpm 5 feed rates: 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev Table surface: 880 x 670 mm Throat: 385 mm Kedpfx Aoy St Hnsh Uelt

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 2.115 h, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 50 obr/min, hitro pomikanje X-os: 8.500 m/min, hitri pomik os Y: 8.500 m/min, hitri pomik na osi Z: 7.000 m/min, skupna masa: 2.708 kg, Ponujamo ta rabljeni stroj TOS OLOMOUC FNG-40 CNC A rezkar, letnik 2017. Tip: FNG-40 CNC A Ksdpfjy Rbb Rsx Ah Ujlt Serijska številka: 404 100 008 Letnik izdelave: 2017 Teža: 2708 kg Če imate dodatna vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: rabljeno, Rabljeni stroj Oprema in tehnični podatki: Precizni vrtalni stroj za izmenični tok Elektronsko brezstopenjsko uravnavanje vrtljajev od 400 do 4500 vrt/min Vrtalna zmogljivost v jeklu in sivi litini: 13/15 mm Kjdpsy Ih Tnjfx Ah Uolt Globina vrtanja 60 mm Prikaz globine vrtanja z mm lestvico s hitro nastavljivim omejitvenim obročem Višinsko nastavljanje glave vrtalnega stroja s pomočjo plinske vzmeti, lebdeče nastavljivo Motor 0,5 kW Razpoložljivost: kratkoročno Lokacija: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2005, Obdelovalna dimenzija: 3000 x 1600 x 180 mm Visokotlačna črpalka 60 KM / 45 kW Model E-60 Delovni tlak 4.130 BAR Poraba vode 4,69 litra/min. Programska oprema Watercad-CAM Samodejna optimizacija reza Klodsxgfbqopfx Ah Uet Lokacija zaloge: Stranka

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: 17.018.011, Teža: 4.950 kg, hodi X/Y/Z: 11 mm, zmogljivost vrtanja: priključna moč: 7,5 kW, hitrost vretena: 3.000 obratov/min, poraba toka: 32 A, z 12-kratnim menjalcem orodij, 10 pnevmatskih vpenjal po celotni dolžini ležišča, z različno opremo in elementi valjčnega transporta, upravljalni terminal, krmilna omara, zaščitna ograja z dostopnimi vrati, tloris stroja: 300x14.000 cm. Kjdpey T Nz Defx Ah Ujlt

Stanje: rabljeno, Leto izdelave: 1965, Drilling capacity in steel (diameter): 45 mm Throat depth: 325 / 1000 mm Workpiece height - max.: approx. 1000 mm Spindle taper: MK 4 Spindle speeds: 40 - 1700 rpm Feeds: 0.125 - 1.25 mm/rev Distance spindle/base plate: 385 / 1400 mm Quill stroke: 325 mm Vertical arm adjustment: 700 mm Arm swiveling: 360° Kjdpsvh Nb Iefx Ah Ujlt Drilling head horizontally adjustable: 675 mm Clamping area of base plate: 1300 x 800 mm Total power requirement: 6.2 kW Machine weight: approx. 3.8 t Machine dimensions (L x W x H): 2.30 x 0.98 x 2.82 m - Automatic feed - Spindle right/left rotation Accessories: cube table 1000 x 750 x 500 mm, hydraulic machine vice on rotary base, jaw width 200 mm; coolant device

Stanje: rabljeno, Leto izdelave: 1980, Drilling capacity in steel (diameter): 50 mm Throat depth: 1250 mm Distance spindle/base plate: 1350 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 12.5 - 1000 rpm Feeds: 0.06 - 0.5 mm/rev Arm vertical adjustment: 620 mm Column diameter: 350 mm Kedpfxovh Nbzj Ah Uolt Total power requirement: 7.7 kW Machine weight approx.: 4.6 t Machine dimensions (L x W x H): 2.53 x 1.15 x 2.82 m Accessories: swiveling cube table, 700 mm high, clamping surface 900 x 725 mm or 900 x 450 mm; coolant system - additional column guide at the end of the arm -