Brusilnik Za Hoble nakup rabljenega (84.265)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! Gjdpfx Aehy Tlrjnfjbl • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) Godpjl D Rp Ejfx Anfebl HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Gjdpfx Aelc Ewisnfsbl Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Working height: 800 mm Gbodpfxjwiwnqo Anfel Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles Gbedpfx Aned Supgsfel MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Gedpfxot Dx U Ss Anfobl Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Laminating Press MAWEG Machine frame inclined at 10° Single-side loading Horizontal beam height adjustable via hand crank (all clamping cylinders can be adjusted simultaneously) Hydraulic cylinders with quick clamping, stepless adjustment Manual hydraulic cylinder clamping Hydraulic cylinder pressing force approx. 2000 kp Hydraulic cylinder stroke 100 mm Clamping depth 100 mm Max. clamping length 2800 mm Max. clamping height 1800 mm 4 pcs. vertical press cylinders 2 pcs. horizontal press cylinders 6 pcs. counter stops Note for used machinery: • Subject to errors in technical details and prior sale. • Quoted prices are ex works, loaded free of charge! Gbjdpjyyn E Ujfx Anfsl • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!) Gsdpfsxqggcex Anfobl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, OTT model JU 2513 Hidravlična furnirska stiskalnica z elektro grelnimi ploščami Izvedba s podbatnicami BUSSE elektro grelne plošče Centralna nadzorna plošča z vsemi upravljalnimi elementi Analogni prikaz temperature za obe grelni plošči Pritisk stiskanja brezstopenjsko nastavljiv s tlačnim stikalom Glavno stikalo dvostopenjska hidravlična črpalka z avtomatskim preklopnim ventilom iz nizkega v visok tlak Varnostna vlečna vrvica Izravnava z zobato letvijo Omejevanje hoda CE Stisna površina: 2500 x 1300 mm Število stiskalnih valjev: 4 Skupna stiskalna sila: 70 t Obratovalna napetost: 3 x 400 V + N, 50 Hz. Skupna priključna moč: pribl. 20,3 kW Gbodpfx Ajxgpaqenfjl Potreben prostor (D x Š x V) pribl.: 2900 x 1250 x 1900 mm Teža: pribl. 3200 kg

Stanje: dober (rabljeno), Leto izdelave: 1989, Pressing area: 2550 x 1350 mm Number of press cylinders: 6 Total pressing force: 140 t Opening width: approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load: approx. 26 kW Required space (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5,500 kg Hydraulic Heated Platen Press Bottom-ram design Electric heating plates Pressing pressure steplessly adjustable via pressure switch Hydraulic pump Central control panel with all operating controls Gedpfxjwd N Rms Anfjbl Digital temperature display for both heating plates Press cycle counter Safety rip cord Rack compensator Main switch Note for used machinery: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works prices – free loading included! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will be answered only if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Calibration and fine sanding machine with 1 sanding unit, 1 motor, top-side processing Working width: 1000 mm Abrasive belt dimensions: 2200 x 1030 mm Workpiece dimensions: 3 - 170 mm Table height adjustment motor: 0.18 kW, 400 V, 50 Hz Main motor: 7.5 kW, 400 V, 50 Hz 2 feed rates: 5.5 & 11 m/min 1st Unit: Combination unit, rubber-coated sanding drum, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd Unit: Cleaning brush Compressed air requirement: approx. 6 bar Extraction port diameter: 200 mm Dimensions (approx. L x W x H): 1385 x 1980 x 1900 mm Gsdpfx Anoudxchjfjbl Weight: approx. 1,800 kg Automatic workpiece thickness adjustment with digital display Sanding belt oscillation Emergency stop for sanding belt with disc brakes Table extension with 3 outfeed rollers Emergency stop button Main switch CONVEYOR BELT AS NEW – replaced by us approx. 3 years ago OVER 30 WIDE BELT SANDING BELTS INCLUDED Note on used machines: • Technical data subject to change and prior sale. • Prices quoted are ex location – free loading. • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at our premises. • Special agreements only valid in written form. (We will only respond to inquiries that include your address and phone number!)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Working width: 1100 mm Godetwzyfjpfx Anfebl Min/max workpiece height: 3 - 120 mm Feed motor power: 0.8 kW Abrasive belt speed: 18 m/sec Abrasive belt dimensions: 1115 x 2620 mm Feed speed: 4.5 / 9 m/min Extraction port: 3 x 160 mm Compressed air connection: 6 bar 1st Unit: Sanding roller Rubber-coated 90 Sh Motor power: 11 kW 2nd Unit: Combination unit Rubber-coated sanding roller 60 Sh Rigid sanding pad Motor power: 11 kW 3rd Unit: Cleaning brush Automatic workpiece thickness adjustment at infeed with digital thickness display Table extension at outfeed Dimensions (approx.) L x W x H: 2291 x 1784 x 2350 mm Weight (approx.): 3000 kg Note for used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location and free loaded. • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and phone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Gbjdpfxsitvkuj Anfel Working width: 1,100 mm Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: Gbodpfshtuvrjx Anfsl - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: delavnici obnovljeno (rabljeno), Grinding table dimensions: 2500 x 800 mm Abrasive belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Table height adjustment: mechanical Right and left rotation 2 abrasive belt speeds Abrasive belt cover on top CE compliant Includes special grinding shoe Note on used machines: • Technical specifications may contain errors; subject to prior sale. • The indicated prices are ex-works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. The buyer is welcome to inspect the machines on site. Gbsdpfxjv D H Sij Anfsl • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Gbedpouxqzuefx Anfjl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Belt dimensions: 2600 x 150 mm Gjdpott Da Defx Anfebl Motor power (grinding belt): 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Grinding table height adjustable via handwheel Table size: 975 x 340 mm Height-adjustable grinding table for radii; size: 400 x 200 mm Sanding arm adjustable: 90° – 0° Extraction port: Ø 120 mm CE certified Required space (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note on used machinery: • Technical specifications are subject to error and prior sale. • Listed prices are ex-site and ex-loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any guarantee or warranty. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Belt Sander LANGZAUNER Model LZG Approximate table dimensions: 2500 x 800 mm Approximate sanding belt dimensions: 6800 x 150 mm Motor power approx.: 3.0 kW, 400 V, 50 Hz Motor protection switch Manual table height adjustment Right/left rotation of sanding belt Sanding belt cover (top) Work area light strip CE compliant Includes special sanding shoe Includes extraction fan NEW GRAPHITE CLOTH Notes on used machines: • Subject to technical changes, errors, and prior sale. • Quoted prices are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as seen, without any warranty entitlement. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!) Godpfxeuxnyuo Anfebl

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Gedpfx Anjhvan Iefebl Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: delavnici obnovljeno (rabljeno), Mortising machine, oscillating chisel mortiser MAKA Type DB 5 including numerous mortising tools – see photos Workpiece stop: 2 pcs Stop rail left/right: 2150 mm Workpiece blow-out: 2x Foot switch Pneumatic workpiece clamping, lateral: 1 pc Pneumatic workpiece clamping, from above: 2 pcs Extraction connection: D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Technical specifications are subject to errors and prior sale. • Stated prices are ex location, free loading! • The machines have been cleaned and function tested. • All machines are purchased as inspected, with no claim to warranty whatsoever. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. Gbsdpfxov Hm Nmj Anfjl (Inquiries will only be answered with your address and phone number!)

Stanje: novo, ALTENDORF Model F45 Pro Drive Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at special price with full manufacturer's warranty. Pro Drive Control: 3.5" colour display with separate keyboard Automatic adjustment of parallel and mitre fences when tilting the saw unit Easy axis calibration Machine diagnostics, operating hours counter, USB interface Recall of last measurement entry (back function) 99 storable cutting programs Grooving: with automatic stepwise positioning of the parallel fence 400V / 50Hz - Europe, scale: mm scale Electromotive height and tilt adjustment 0 – 46° for the main saw blade with automatic cut height correction when tilting the saw unit Machine height 910 mm (standard equipment) The F 45 control panel is mounted at eye level, allowing convenient operation of all axes and easy overview of all settings. Single-handed operation of the swing-away device is easily accessible from the operator's position in front of the machine. Another advantage: nothing obstructs your way at the smooth machine front. INCLUDES OPTIONS: M62003 Template holder M64080 Increased cutting height with saw blade projection up to 204 mm max. M51101 Single-side tilting saw unit with 7.5 kW (10 HP) motor M24030 2-axis scoring unit with electromotive height and lateral adjustment M24037 LED lighting for the scoring unit hazard zone M41010 Table extension, 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Mitre-angle fence, crosscutting up to 3500 m M44443 CNC-controlled parallel fence, cutting width 1300 mm M44450 Front support roller M37003 On/off switch on the double roller carriage Note on used machines: Gbjdpfxoiz Aufj Anfjl • Errors in technical data and prior sale reserved. • Stated prices are ex location - free loading! • Machines have been cleaned and function-tested. • All machines are purchased as inspected, without any warranty claim. Buyers are free to inspect the machines at the site. • Special agreements only possible in written form. (We only answer inquiries with your address + telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Torsion-free C-frame construction made from steel Standard heating system Disc system with tolerance compensation for different veneer thicknesses Regulation of heating output in stationary and mobile operation Thread breaking roller Throat depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Includes gluing reel & operating manual Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg Note on Used Machinery: Gjdpfx Ansg Nn E Njfsbl • Subject to technical changes and prior sale. • Stated prices are ex location - free loading! • Machines have been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries containing your address & telephone number!)

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Godpofh Tmmofx Anfebl Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: Gbedjd E Ixzjpfx Anfsl • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Zelo dobro ohranjen stroj malo delovnih ur, Kontak možen tudi preko WatsApp, Govorimo Angleško Nemško in ex YU jezike. Strj se nahaja v Nemčiji. Vsa specifikacija mašine je v prilogi pdf Gbodpsr Idkwefx Anfjl