Briketna Stiskalnica / Briketna Stiskalnica nakup rabljenega (2.712)

Stanje: rabljeno, Technical details: Pressure: manual t Stand width: - mm Stroke: approx. 20 mm Machine weight approx.: 9.5 kg Machine dimensions: L: 580 x W: 280 x H: 80 mm PNEUMATIC CABLE LUG PRESS - Application range: Pressing cable lugs onto electrical cables and air conditioning lines Other features: - Press cylinder: ram Ø 25mm; external Ø 68mm; extension length approx. 20 mm Dcsdsu Nftgopfx Ac Noh - Tool holder: width = 40 mm; length = 90 mm - Hand lever Ø 30 x L: 300 mm Equipment: - Tool box with various round and hexagonal die sets, see picture in-stock

Stanje: rabljeno, Leto izdelave: 1969, Tehnični podatki: Tlak: 55 t Iztek: 250 mm Število hodov: 120 hodov/min Dodoxu Dwmepfx Ac Noch Vgradna višina: miza/bata zgoraj: 380 mm Nastavitev bata: 55 mm Debelina pločevine pri prehodnem hodu: 2,25 mm Območje hoda bata: 6 - 90 mm Skupna potrebna moč: 8,8 kW Približna masa stroja: 2,75 t Dimenzije D x Š x V: 1,4 x 1,2 x 2,2 m

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Dedpovc Awxofx Ac Nsch Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes

Stanje: rabljeno, Technical Details: Pressing force: 100 t Installation height: Table/Ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Dedpfx Aovc Ax Nec Njch Ram advance speed: 200 mm/s Ram return speed: 200 mm/s Table size: 750 x 560 x 90 mm Passage in table: Ø 26 mm Ram mounting surface (W x D): 530 x 400 mm Pin hole in ram: Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Stanje: rabljeno, Tehnične podrobnosti: Djdpou Icwtsfx Ac Noch Tlak: 80 t Razmik med stebri: 880 mm Vgradna višina: 200 mm Velikost mize: 880x300 mm Višina nad tlemi: 1000 mm Razmik med stebri: 800 mm Skupna moč: ca. 12 kW Teža stroja ca.: 2855 kg Prostorske potrebe ca.: D:1,4 x Š:1,65 x V:1,9 m TISKANJE - IZTISKANJE - Toplotna preša (greta preša) Možnosti uporabe: - npr. za folije, plastike, papir, trde vlakninske snovi ipd. - Velikost žiga: 600x310 mm Oprema: - Števec - k - Napajanje 380/415 V / 50 Hz Pribor: - Nosilna plošča za matrico (600x300x90 mm) ni ogrevana. Prodaja v videnem stanju.

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Pressing force: 200 t Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Djdpfx Aeu Icc Asc Nsch Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tooling optional *

Stanje: rabljeno, Tehnične podrobnosti: Pritisk: 160 t Izvitek: 760 mm Hod bata: 32...140 mm Razdalja med mizo in batom: 400 mm Nastavitev bata: 100 mm Dcjdpou Nfhqofx Ac Njh Število hodov: 50 hodov/min Miza: 760x1000x95 mm Prehodna odprtina v mizi: 400x350 mm Vpenjalna površina bata: 630x850 mm Vpenjalna plošča: 760x1010x92 mm Skupna potreba po moči: 15 kW Teža stroja pribl.: 6,2 t Dimenzije stroja pribl. D x Š x V: 2,9x1,2x3,4 m Dimenzije elektro omare D x Š x V: 0,8x0,45x2,1 m Upravljanje preko dvomičnega upravljanja Stroj je možno demonstrirati. i.D. *

Stanje: rabljeno, Tehnične podrobnosti: Dcodpou Nfnwsfx Ac Nsh Tlak: 80 t Vgradna višina: 600 mm Hod berila: 200 mm Tlak: 30 t Vgradna višina: 680 mm Hod berila: 300 mm Razdalja med stebri: 1060 mm Vpenjalna površina osnovne plošče: 1060x600 mm Miza nad tlemi: 720 mm Hitrost berila: berilo 1: 40 mm/s Hitrost berila: berilo 2: 95 mm/s Vpenjalna površina osnovne plošče: Dm=150 mm Skupna potrebna moč: 13 kW Teža stroja pribl.: 4,5 t Potrebni prostor pribl.: D:1,6xŠ:1,1xV:3,4 m MONTAŽNA PRESA - Preša z dvema beriloma z 30t + 80t - Nožni upravljalnik Preša je na voljo za prodajo kot opisano, prosto v Leipzigu.

Stanje: rabljeno, Leto izdelave: 1991, Technical Details: Pressure: 40 t Installation height: Table/Ram Top: 450 mm Throat depth: 375 mm Ram stroke: max. 300 mm Table size: 900 x 500 x 85 mm Table opening: Ø 120 mm Height above floor: 900 mm Dodpfx Aju Nfp Isc Nech Total power requirement: 15.0 kW Machine weight approx.: 5.8 t Machine dimensions approx. LxWxH: 2.3 x 1.45 x 2.40 m The press features a welded frame designed according to static calculations. (Manufacturer's specifications) The hydraulic unit consists of a three-stage pump system (high-pressure pump, low-pressure pump, and control pump). Additional technical data: - Ram plate size W: 900 x D: 500 mm - Ram bore Ø 40 x 75 mm - Hydraulics: tank capacity approx. 500 liters; operating pressure 275 bar; pump capacity 22.9 l/min - Overrun travel 7 mm - Overrun time 58 ms - Single stroke and automatic cycle - Light barrier (can be repaired optionally) Two-hand operation and/or control panel *

Stanje: rabljeno, Tehnične podrobnosti: Dolžina stebla: maks. 30 mm Zmogljivost: 600 kos/min Največji premer žice: 5 mm Delovno območje: 30 mm Dedpfx Asu Nfrcjc Njch Dimenzije krmilne omarice DxŠxV: 1,45x0,55x2,1 m Dimenzije stroja: 2,95x1,5x2,15 m Dimenzije odvijalnika: 1,15x1,15x1,15 m Mehanska stiskalnica za hladno preoblikovanje Za proizvodnjo zakovic, verižnih zatičev, zatičev ali posebnih izdelkov. (BREZ VIJAKOV po navedbah proizvajalca) Naprava je posebna izvedba in neuporabljena (kot nova). Pribor: - odvijalnik - navodila za uporabo Stroj je možno prikazati v obratovanju. i.D.

Stanje: rabljeno, Leto izdelave: 1960, Technical Details: Pressure: 10 t Throat depth: 255 mm Ram stroke - max.: 400 mm Ram return speed: 0.180 m/sec Ram advance speed: 0.080 m/sec Installation height: table/ram, top: 630 mm Installation height: table/ram, bottom: 230 mm Dcedpfsu Nfudjx Ac Neh Table clamping area: 420 x 400 mm Passage opening in table: 220 mm Ram clamping area: 200 x 200 x 65 mm Total connected load: 1.6 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 1.1 x 0.5 x 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Leto izdelave: 1998 Model: HÄMMERLE BM 200 - 4100 Kataloška številka: 11803-37 Serijska številka: 590 097 Tlak: 2000 kN Delovna dolžina: 4100 mm Maks. hod: 400 mm Izrez: 250 mm Dcjdpewn Hfijfx Ac Neh Teža: 18.900 kg + orodja Stroj ni popolnoma funkcionalen, desni valj pušča, stroj se spušča neenakomerno, hidravlična črpalka je glasna Osi: Y – gibanje nosilca gor in dol X – omejevalo in nastavitev razdalje upogibanja 2x R – omejevalo zgoraj in spodaj, neodvisno 2x Z – neodvisno 2 osi na sprednji strani nosilca, ročno 2 osi na zadnji strani nosilca, samodejno Nosilec pločevine

Stanje: rabljeno, Dimenzija plošče: 2.500 x 1.1250 mm Odpiralna širina: 300 mm Število etaž: 1 kos Teža stroja ca. 3 t Dcjdsy Ty E Topfx Ac Nsh Leto izdelave: neznano

Stanje: zelo dobro (rabljeno), Prehodna stiskalnica 3000 mm 14 zgornjih batov 6 stranskih batov Vodno ogrevanje z grelniki v plošči CE oznaka Dcedpfx Acsx Apxle Nsh Leto proizvodnje 1996

Stanje: zelo dobro (rabljeno), Prehodna stiskalnica 3000 mm 14 zgornjih batov Djdoza Duwspfx Ac Njch 6 stranskih batov Vodno ogrevanje z grelniki v plošči CE oznaka Leto proizvodnje 1996

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur Dodpfx Aed Nm Sioc Noch

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Dcsdpfxegl Nlmj Ac Njh Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Dcedpfx Acsv Rpxle Njh Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Dcedpjxfwdefx Ac Njh Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: Dsdpfxofci D Ao Ac Nech -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months Dcodpfx Acogfm Rys Neh The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Dedot Hxudjpfx Ac Nsch Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: dober (rabljeno), Technical data: Briquetting press RUF RB 440 Pressing capacity (wood briquetting): up to max. 440 kg/h Dedpfjt H D Ezsx Ac Njch Material moisture content: max. 15% Motor power: approx. 30 kW Briquette size, rectangular: 150 x 60 mm Length: 40 – 110 mm Dimensions (approx.): 1680 x 1800 x 2000 mm Weight: 3000 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Briketirni stiskalnik za aluminijeve ali jeklene ostružke Izjemno visok pritisk stiskanja: 3.700 kg/cm² Velik lijak: 600 x 1500 mm Format briketa: 60 x 40 mm Zmogljivost: Aluminijevi ostružki – do 70 kg/h Jekleni ostružki – do 180 kg/h Medeninski ostružki – do 220 kg/h *odvisno od vhodnega materiala in nastavitev Vključeno: Dcsdpfxew Ig Sue Ac Neh - Kad za emulzijo - Črpalka za emulzijo - Oljni hladilnik

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Dcedod N Dnhopfx Ac Neh Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result