Blm Adige-Sys Lt9 nakup rabljenega (1.303)

Leto izdelave: 2026, stanje: novo, Novi PSA generator dušika OS-225-NX zasnovan za 505,2 Nm³/h pri 5 bar (g) in čistosti 98,0 % (druge izvedbe na zahtevo) Dobavni rok 8 do 10 tednov Zahteve za zunanjo dovodno stisnjenega zraka: Prostorninski pretok: 20,21 m³/min Tlak: 7 bar (g) Temperatura: +10°C do +50°C Kakovost stisnjenega zraka v skladu z ISO 8573: 1.4.1 Specifikacija pridobljenega dušika: Količina: 505,2 Nm³/h Tlak dušika: 5 bar (g) Čistost: 98,00 % Oprema: Dušikov generator OS-225-NX Senzor rosišča za stisnjen zrak Iiodpswa I Ebofx Abxsc Auto-Purity-Control vključno z merilcem pretoka Siemens S7 Touch Control Panel Merilec pretoka - vhodna in izhodna filtracija - senzor čistosti in analiza - cevi iz nerjavečega jekla - vhodni in izhodni regulatorji dosožno iglični ventil (regulator pretoka) - izhodni tlačni senzor - večjezični touch control panel - prikazovalnik delovnih ur Obiščite naše poslovne prostore v Erlangnu. Na več kot 450 m² razstavne površine vas čaka široka ponudba rabljenih in novih kompresorjev.

Stanje: rabljeno, Horizontalna hidravlična spona Isdpoy Ud Rpefx Abxoic

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Tip: Loma IQ3+E Mere iskalne tuljave: 650 x 150 mm Mere izdelka: 300 x 600 x 115 mm (d x š x v) Dolžina transportnega traku: 1.800 mm Širina transportnega traku: 600 mm Višina transportnega traku: 850 +/- 75 mm Osnovna občutljivost iskanja: FE: 1,2 mm / NFE: 1,5 mm / SUS: 1,8 mm Iskalna frekvenca: Multifrekvenčni Letnik izdelave: 2017 Posebnosti: na kolesih Transportni trak: verižni trak Hitrost traku: nastavljiva Motor: motor z menjalnikom Priključek: 230V/50Hz Izmet: umikajoči voziček 250 mm Upravljalna stran: desna v smeri transporta Dodatki: 1 komplet testnih palic Tip: IQ2 Mere iskalne tuljave: 550 x 200 mm Mere izdelka: 500 x 165 mm (š x v) Dolžina transportnega traku: 1.500 mm Širina transportnega traku: 500 mm Višina transportnega traku: 850 +/- 50 mm Osnovna občutljivost iskanja: FE: 1,5 mm / NFE: 1,8 mm / SUS(316): 2,0 mm Iskalna frekvenca: 156 kHz Letnik izdelave: 2005 Posebnosti: na transportnih kolesih Transportni trak: verižni trak Hitrost traku: 25 m/min Motor: motor z menjalnikom Priključek: 400V/50Hz Izmet: alarm in zaustavitev Upravljalna stran: leva v smeri transporta Dodatki: tehnična dokumentacija Tip: Loma IQ2 Mere iskalne tuljave: 350 x 250 mm Mere izdelka: 300 x 215 mm (š x v) Dolžina transportnega traku: 1.500 mm Širina transportnega traku: 300 mm Višina transportnega traku: 750 +/- 100 mm Osnovna občutljivost iskanja: FE: 1,5 mm / NFE: 1,8 mm / SUS: 2,0 mm Iskalna frekvenca: srednja Letnik izdelave: 2007 Posebnosti: IP69K Transportni trak: verižni trak Hitrost traku: pribl. 25 m/min Motor: motor z menjalnikom Priključek: 400V / 50Hz Iedor Eq Unopfx Abxjic Izmet: alarm in zaustavitev Upravljalna stran: leva v smeri transporta Dodatki: 1 komplet testnih palic

Stanje: novo, Frekvenčni pretvornik Iodpfxjzabkcj Abxeic

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop device with a small working area, ideally suited for small components. Due to its compact design, the system is highly practical and can be used anywhere. The device is very easy to operate even without programming skills. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a handheld scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optionally: 20 watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (simple preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm Ijdpfjwkpxkox Abxeic - Grid holes for fixtures - Clamping surface 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: rabljeno, Leto izdelave: 2004, Power press cylinder: 4000 kN Steel, cast iron: 4-6 t/h Iodpfx Aolhqc Njbxsic Aluminium: 3-4 t/h Drive power: 1x22 kW Footprint: 7x4, 2x4, 1 m (m x m) Machine weight: 23 t Location: Austria Available immediately

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser has become indispensable for permanent marking. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software can automatically increment serial and part numbers after prior setup. In addition, it can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined fields. Use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser 30 Watt (optionally 20 Watt or 50 Watt) • Class 1 laser • Wavelength 1064 nm • Marking field size 150x150 mm (optionally larger) • Signal lamp to indicate operating status • Optional: rotary axis (3-jaw chuck) • Optional: extraction system (incl. activated carbon filter) • Optional: digital height measurement system • Optional: autofocus system for automatic determination of focus distance • Marking software EZCAD available in German / English (other software available on request) • Pilot laser (simple preview, plain text preview) • Focus finder (easy focus adjustment) Ijdpfx Abewlc Stsxsic • Max. part height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touch screen and keyboard tray, height adjustable • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf Iijdpfjwkpx Rox Abxjc • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm Iodouy H Nqspfx Abxsic - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 Iedjy I Nbmjpfx Abxsic - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: zelo dobro (rabljeno), Here we offer you an ET SYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10,800 VA The 3260A series is a high-power 300 V AC and DC load in one unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with stepped or square waveforms. Each AC & DC load of the high-power series features its own control and display panel, as well as a 5-status recall/memory function that enables more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) extends the simulation of the test environment. The integrated GO/NG meter check function provides a quick test result diagnosis for production and QC test throughput. Features Iijdpfx Ajzd Uh Iobxec - Display of voltage, current, watt, and VA variables. - CC, linear CC, CR, and crest factor mode. - GPIB/RS232 interface and 5-status recall/memory function. - Adjustable power factor (PF): 1, 0.85 ~ -0.85. - Upper/lower threshold capability. - Protection against V, I, W, and ℃. - Dual 4 1/2-digit meter display for voltage, current, watt, and VA. - Suitable for sine, square, and stepped waveforms. Dimensions: Width 600 mm, Height 1506 mm, Depth 600 mm Weight: 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data, specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Applied Biosystems ViiA7 Here we offer you an Applied Biosystems ViiA7. Specifications: - Block exchange from the front of the instrument in under 1 minute; no secondary tools required - Supported applications: standard curve, comparative CT, genotyping, presence/absence, HRM, melt curve - Temperature uniformity: ±0.5 °C, within 30 seconds after reaching the set temperature - Run time: approximately 35 minutes for 96/384-well blocks with Applied Biosystems® Fast Master Mix - Supported blocks and volumes: 96-well standard (10–100 μl reactions), 96-well fast (10–30 μl reactions), 384-well (5–20 μl reactions), TaqMan® Array Micro Fluidic Cards (~1 μl reactions) - Detectable sensitivity: down to 1 copy - Excitation/detection wavelengths: 6 excitations (450–670 nm), 6 emissions (500–720 nm) - Dynamic range: up to 9 logs of linear dynamic range - Resolution: Detect only 1.5-fold changes in target quantities in a singleplex reaction - 21 CFR part 11 enablement: Security, audit, and e-signature functions for instrument data - Automation: Includes plate loading arm with barcode (distribution, service, and support provided by Life Technologies) - Remote notification: Notifies user by email when a run is started, stopped, or aborted - Data export format: Fully user-configurable Description: Applied Biosystems Real-Time PCR ViiA7. Isdozd Ud Nspfx Abxjic Ideal for performing medium- to high-throughput real-time PCR. Interchangeable blocks for 96-well, fast 96-well, and 384-well plates as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet ports. 2x USB ports. 1x RS 232 port. 2x display ports. Weight: 67 kg Model: Applied Biosystems ViiA7 Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and information excepted!) We are happy to answer any further questions by phone.

Leto izdelave: 2019, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Približno 250 kosov na zalogi. Cena na kos: 100 evrov. Gre za mešanico rabljenih in novih kosov. Iodpfx Ajy Uc Sfebxoic

Stanje: zelo dobro (rabljeno), 3D Systems We are offering you a 3D printer here. Solid-State Nd:YVO4 with third harmonic generation Wavelength: 354.7nm Nominal laser head output: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Production layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ Scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Wide line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Iisdpfxszd Tt As Abxec Wide line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (Please see pictures) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Stratasys Type: Stratasys 3D Printer PolyJet Printer J750 Objet Stratasys 3D Printer The Stratasys J750 3D printers enable you to optimize and streamline the process of producing models from various materials on a single build platform within one print job. During the design phase, the J750 3D printer (with CAD software) allows you to assign colors to specific model components. The model can then be saved as a VRML file and printed in the desired colors. The Stratasys J750 3D printer offers a build volume of 490 mm × 390 mm × 200 mm (19.3 × 15.35 × 7.8 in). Power Connection: 100–120 VAC, 50–60 Hz, 13.5 A, 1-phase Or 220–240 VAC, 50–60 Hz, 7 A, 1-phase Materials: - Agilus30 family - Digital ABS Plus - Tango Iiedpfx Aezd Tf Ejbxjc - Transparent - Vero family - Veroflex - VeroUltra Opaque - SUP705, SUP706 support material Applications: - Rapid prototyping - Concept models - Medical models - Tools and fixtures - Full-color textures Total print time on the machine is approx. 1483 hrs. Condition: used Scope of delivery: (see photo) (Technical data subject to change and possible error!) Should you have further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Ifsys Iijdpjzd Rk Eefx Abxoc Type: 114100 Type: VL 13 Servo Press Bunker system with 2x Vibroliner and 2x Vibro Bunker 1x Return Conveyor 2x Control Unit FC 1000 Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have by phone.

Stanje: novo, Nord Drivesystems SK pogon za mešač sa inox mešalicom Novi nekorišćeni pogon za mešač iz lagera. Kompletan set sačinjen od Nord motoreduktora, prirubničkog prihvata i inox mešala za upotrebu u rezervoarima i procesnoj industriji. Proizvođač: NORD Drivesystems Tip motora: SK 90L/4 Tip menjača: SK 9012.1AFBH VL2-90L/4 Izvedba: Pogon za mešač sa motoreduktorom Stanje: Novo staro lager (NOS) Snaga motora na 50 Hz: 1,50 kW Snaga motora na 60 Hz: 1,73 kW Broj obrtaja motora na 50 Hz: 1395 min⁻¹ Broj obrtaja motora na 60 Hz: 1675 min⁻¹ Radni režim: S1 Stepen zaštite: IP55 Klasa izolacije: F Napon na 50 Hz: 230/400 V Δ/Y Napon na 60 Hz: 265/460 V Δ/Y Iisdpfezb Nvvox Abxec Nazivna struja na 50 Hz: 6,15/3,55 A Nazivna struja na 60 Hz: 6,15/3,55 A Faktor snage cos φ: 0,78 Efikasnost IE1 pri 50 Hz: 77,5 % Efikasnost IE1 pri 60 Hz: 80,4 % Prenosni odnos: 8,09 : 1 Izlazna brzina: 172 min⁻¹ Položaj ugradnje: IM4 Osovina mešala: nerđajući čelik Mešalni krakovi: nerđajući čelik, 2-kraki Prirubnički priključak: prisutan

Stanje: zelo dobro (rabljeno), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer features a large build volume, allowing for the production of large models without prior sectioning. Additionally, the large base area increases productivity when printing many small models in a single print run. This is a 3D color printer with impressive productivity and color accuracy. The ProJet ColorJet color 3D printers from “3D Systems”—also known as ZPrinter—use ColorJet CJP ‘binder jetting’ technology, printing layer-by-layer directly in a powder bed. As a result, even for complex and detailed prints, these 3D printers do not require dedicated support structures. The unfused powder supports the components during printing and is then semi-automatically recycled. Areas of application include: communication of form and design, installation analysis, initial functional testing, variant trials, form development, design, research & development, marketing, sales, master patterns for thermoforming, dental models, presentations, and more... Iedpfx Ajzdyxrsbxeic This is the best ColorJet 3D color printer in its class for applications with the highest demands, setting new standards in full-color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Build envelope: 254 x 381 x 203 mm Colors: 390,000 colors (5 print heads including black) Resolution: 600 x 540 dpi Minimum feature size: 0.1 mm Automation: Fully automated (including automated setup and self-monitoring, automated powder loading, automated recycling and removal of powder, snap-in binder cartridges, intuitive control panel) Vertical build speed: 28 mm/hour Material options: High-performance composite material Layer thickness: 0.089–0.102 mm Number of jets: 1,520 Details: ZPrinter ProJet 660 Pro 3D Printer Supported file formats: STL, VRML, PLY, 3DS, ZPR Machine dimensions: 188 x 74 x 145 cm Machine weight: 340 kg Power requirements: 100–240 V, 1.5–7.5 A Workstation compatibility: Windows® 7, Windows® XP Professional, and Windows Vista® Business/Ultimate Regulatory compliance: CE, CSA Special setup requirements: None Type: ProJet 660 Pro 3D Printer Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data. All specifications are subject to change.) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Ifsys Type: 114100 Model: VL 13 Iijdpfx Abozdp Icexoc Screw Feeding System Hopper system with 2x Vibroliner and 2x Vibro hopper 1x Return conveyor 2x Control unit FC 1000 Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted) For any further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Stratasys 3D Printer Dimension Elite We offer you a Stratasys 3D Printer Dimension Elite here. Stratasys 3D Printer Dimension Elite The Dimension Elite 3D printer is part of the Design Series from Stratasys. The Dimension Elite printer is ideal for printing 3D prototypes and modeling functional components such as medical devices, mobile electronic equipment, or precision instruments. With a simple click on "Print," the CAD file is processed and the print job starts. After easily removing the soluble support material, you receive a precise and detailed component. Manufacturer: Stratasys Type: Professional grade Material(s): ABS Technology: Fused Deposition Modeling (FDM) Setup: Plug&Play Dimensions: 686x914x1041 mm Iiodpfjzdnprox Abxjc Weight (kg): 136 Nozzle diameter (mm): - Layer thickness (µm): 178 Printing speed (mm/s): - Precision (µm): - Filament diameter (mm): - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connectivity: Ethernet Operating system: Windows XP, Windows 7 Power requirements: 100 to 120 VAC, 60 Hz, minimum 15 A on a dedicated circuit or 220 to 240 VAC, 50/60 Hz, minimum 7 A on a dedicated circuit Model: Dimension Elite Condition: Used Scope of delivery: (See photo) (Specifications and information subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large build size of 500 x 400 x 200 mm, designers and engineers can quickly produce prototypes to simulate the intended end product more closely than with any other technology. What makes the Objet Connex unique? With Objet's patented simultaneous multi-material jetting technology, the Objet Connex 500 can print models from up to 14 different materials in a single build job. The system is ideal for designers and engineers who want to effectively showcase the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials™. This enables users to simulate various mechanical and physical properties, from rubber-like to rigid, opaque to transparent; and standard to ABS-grade engineering plastics. Outstanding productivity The Objet Connex 500 offers: • Multi-material models – there is no longer any need to design, print, and bond separate model elements • Different parts. Different materials. Same tray – saves time and fulfills multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls down to 0.6 mm • Large format tray with dimensions of 500 x 400 x 200 mm – allows printing of large parts in a single build or many small parts on a single tray • High throughput – up to 20 mm per hour and pass • Reliability and robustness – at least 72 hours of continuous capacity • High speed – simultaneous printing of multiple items from different materials; models cure as they print; models can be processed immediately after printing • Easily removable support material for complex geometries • Office convenience – quiet system with fully sealed, REACH-compliant cartridges that are easy to load and unload. Reported to be operational by last user. No functional test conducted by our company. Year of manufacture: 2010 Type: Objet Connex500 Condition: used Scope of delivery: (See image) (Specifications and technical details subject to change and error!) Further questions can be answered for you by phone. Iisdpfozdnplex Abxjc

Stanje: zelo dobro (rabljeno), Stratasys 3D Printer Dimension We offer you a Stratasys 3D Printer Dimension. Stratasys 3D Printer Dimension The Dimension 3D printer is part of the Design Series from Stratasys. Manufacturer: Stratasys Model / Printing Technology: FDM (Fused Deposition Modeling) Build Volume: 20.3 x 20.3 x 30.5 cm Printable Material / Filaments: Original ABSplus spools or other ABS or HIPS third-party materials Dimensions and Weight: 68.6 x 91.4 x 104.1 cm; 127 kg Build Platform: Plastic; reusable Software / File Types / Operating Systems: CatalystEX / STL / Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista Special Feature: Ideal for complex 3D models with a resolution of 0.178 mm or also 0.25 mm layer thickness. Type: Dimension Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors!) Iisdpfxjzdnpfj Abxoc For further questions, we are happy to assist you by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, skupna višina: 1.626 mm, skupna širina: 864 mm, potovalna razdalja osi X: 305 mm, pomik osi Y: 254 mm, pomik po osi Z: 305 mm, največja dolžina izdelka: 711 mm, število osi: 3, This 3-axis Stratasys F270 was manufactured in 2018. It features a maximum build volume of 305 x 254 x 305 mm and offers multiple material feed options with four spool bays. The machine is designed for various model materials, including PLA and ABS-M30. If you are looking for high-quality 3D printing capabilities, consider the Stratasys F270 plastic 3D printer we offer for sale. Contact us for further details. - Maximum build volume (XYZ): 305 x 254 x 305 mm (12 x 10 x 12 in) - System dimensions and weight: 1,626 x 864 x 711 mm (64 x 34 x 28 in), 227 kg (500 lbs) with consumables Iijdpfszbhxvsx Abxoc - Noise specification: Maximum 46 dB during build, 35 dB idle - Dimensional accuracy: +/- 0.200 mm (0.008 in) or +/- 0.002 mm/mm (0.002 in/in) - Material feed options: 4 material spool bays, 2 for model material, 2 for support, located in a front-loading drawer - Model materials: PLA, ABS-M30, ASA, FDM TPU 92A, ABS-CF10, QSR support material - Layer thickness options: 0.127 mm (0.005 in), 0.178 mm (0.007 in), 0.254 mm (0.010 in), 0.330 mm (0.013 in) - Network connectivity: Wired (TCP/IP protocols with at least 100 Mbit/s, RJ45) and wireless-ready (IEEE 802.11n, g, or b; WPA2-PSK, 802.1x EAP) - Software compatibility: GrabCAD Print - System requirements: Windows 7, 8, 8.1, or 10 (64-bit) with at least 4GB RAM (8GB+ recommended) - Operating environment: Temperature: 15-30°C (59-86°F), humidity: 30-70% RH - Power requirements: 100-240V~, 12-7A, 50/60 Hz - Regulatory compliance: CE, FCC, EAC, cTUVus, KC, RoHS, WEEE, Reach, RCM - The F270 has a defective circuit board, and the display’s touch function no longer works. However, the touch function is not essential, as a mouse can be connected via the USB port. Due to the defective board, it is currently non-operational and cannot be switched on. - Insight software license: Not included - DOD STIG compliance (Red Hat Enterprise Linux): Not included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, skupna višina: 711 mm, skupna širina: 864 mm, potovalna razdalja osi X: 355 mm, pomik osi Y: 254 mm, pomik po osi Z: 355 mm, največja dolžina izdelka: 1.626 mm, število osi: 3, This 3-axis Stratasys F370 was manufactured in 2017. It features a maximum build volume of 355 x 254 x 355 mm and supports a range of materials including PLA, ABS, and PC-ABS. The printer is equipped with four material spool bays for efficient operation. If you are looking for high-quality 3D printing capabilities, consider the Stratasys F370 plastic 3D printer we are offering for sale. Please contact us for further details. - Maximum build size (XYZ): 355 x 254 x 355 mm (14 x 10 x 14 in) - Model materials: PLA, ABS-ESD7, ABS-M30, ASA, Diran 410MF07, FDM TPU 92A, PC-ABS, ABS-CF10, QSR support material - Layer thickness: Depending on geometry/material (0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm) - Material feed options: 4 material spool bays (2 for model, 2 for support material), located in a drawer at the front of the unit - System dimensions: 1626 x 864 x 711 mm (64 x 34 x 28 in) Iiedpszbhudefx Abxec - System weight: 227 kg (500 lbs) with consumables - Noise specification: Maximum 46 dB during build, 35 dB idle - Accuracy: +/- 0.2 mm (0.008 in) or +/- 0.002 mm/mm (0.002 in/in), whichever is greater - Network connectivity: Wired TCP/IP (minimum 100 Mbps, RJ45), wireless capable (IEEE 802.11n, g, or b) - Software: GrabCAD Print, Insight software license - Security feature: ProtectAM technology (U.S. DoD STIG compliance based on Red Hat Enterprise Linux software) - Power requirements: 100-132V/15A or 200-240V/7A, 50/60 Hz - Only the touchscreen function is defective. The device can still be operated using a connected mouse.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 240 V, vhodni tok: 13 A, vhodna frekvenca: 60 Hz, Ponujamo to rabljeno 3D tiskalnik Stratasys Objet350 Connex3, letnik 2019. Model: Objet350 Connex3 Serijska številka: 370192 Leto izdelave: 2019 Napajalna napetost: 100–120 V Napajalna napetost: 200–240 V Iiodpfx Absyzq Nlexec Nazivni tok: 13,5 A Nazivni tok: 7 A Frekvenca: 50–60 Hz Število faz: 1 Kratkotrajna tokovna obremenitev: 1000 A Če imate kakršnakoli vprašanja ali potrebujete dodatne informacije, nam pišite ali nas kontaktirajte po telefonu.