Biesse Rover A 1359 Ats nakup rabljenega (79.728)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2009, Funkcionalnost: nepreverjeno, število osi: 4, dolžina mize: 4.300 mm, širina mize: 2.200 mm, število vreten: 40, premer orodja: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Ndodpfx Aeyq Ez Tskhjc Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of positions tool magazine 1: 22 Number of positions tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT Automatic panel loading system Automatic panel stacking system Lift table Transport system Vacuum pump Note: The safety fences at the rear and at the loading table are missing and will only be delivered if available. The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documentation of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7087

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Oblepilka robov BIESSE Akron 1440A Na voljo april/maj 2026 Ndsdpfxjyh A I Aj Akhjc CE certifikat Leto proizvodnje: 2017 Možnost pregleda stroja pred nakupom

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Units with emergency brake device Njdpsychqzjfx Akhedc Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: rabljeno, Numerical control with NC 410 software Machine suitable for the first pass of the panel Motorized mobile shoulder opening by CNC, 1500 mm Panel height 60 mm PVC/ABS 3 mm Infinitely variable feed speed Electronically adjustable working height by CNC Motorized rubberized belt with superior pressure Squaring unit consisting of (on each side): * Double pre-milling unit * Automatically timed anti-splintering unit Ndsdpfx Akerxzb Ushoc Edge unit consisting of (on each side): * Gluing unit for EVA hot-melt adhesive with pre-melter * Pressure roller unit for straight profiles with adjustable pressure rollers * 2-position coil magazine with automatic edge change * Overlapping trimming unit with 2 motors * Picking unit with 2 tilting motors * Scraping unit tiltable from 0-90° * Edge scraper unit * Glue scraper unit * Belt sanding unit * Brush unit

Stanje: rabljeno, številka stroja/vozila: 007686, Working area X-axis: 3765 mm Working area Y-axis: 1560 mm Working table: nesting table Main spindle power: 13.2 kW Number of controlled axes: 3 axes Number of drilling spindles: 18 Number of tool positions: 12 Nedpfxou Tliyo Akhjdc

Stanje: rabljeno, številka stroja/vozila: 008483, Tip nameščenega roba: tanek rob, debel rob Lepljenje sistem: EVA Multifunkcijska enota: da Maks. podajalna hitrost: 30 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 10 kos Ndsdpfsyxmx Rjx Akhec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: 36956, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 3 mm, skupna dolžina: 9.800 mm, skupna masa: 600 kg, višina plošče: 1.060 mm, TEHNIČNE PODROBNOSTI Višina obdelovanca: 60 mm Debelina roba: do 3 mm Minimalna širina plošče: 55 mm Minimalna dolžina plošče: 100 mm Višina plošče: 1.060 mm Nosilec orodja: ISO 30 Ndodpfx Asx A Tzqjkhjc PODROBNOSTI O STROJU Mere & Teža Skupna dolžina: 9.800 mm Teža: 600 kg Vhodna frekvenca: 50 Hz OPREMA Povratni sistem Deluje z PUR lepilom Razpršilni sistem Predrezalna enota RT 20 Lepilna enota SP 20 6-pozicijski magazin za robove Končna rezalna enota IT 90-S Groba rezkalna enota RS 10 Fina obrezovalna enota RF 40 Opomba: Dodatne informacije o opremi so na voljo v priloženi kartici stroja.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, številka stroja/vozila: 94464, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.400 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 155 mm, model krmilnika: XNC Numerical Control, TEHNIČNE PODROBNOSTI Delovno območje X-os: 3.400 mm Delovno območje Y-os: 1.300 mm Delovno območje Z-os: 155 mm Število delovnih polj: 2 Pozicije stranskega menjalca orodij: 3 Pozicije verižnega menjalca orodij: 20 Nedjydkkgopfx Akhjdc Razpored vrtalne glave: 10 vertikalnih svedrov, X-os 12 vertikalnih svedrov, Y-os 6 horizontalnih svedrov, X-os 2 horizontalna svedra, Y-os PODROBNOSTI STROJA Krmiljenje: XNC Numerical Control Tip vertikalnega vretena: C-os Vector, Iso 30 stožčasti priključek OPREMA Sesalna črpalka 8 ročno nastavljivih palic za podporo priseskov z indikatorjem 8 pnevmatskih bakelitnih letvic za dvigovanje plošč 3 ročno nastavljive prisesalne čaše na palico Sprednji zaščitni in varnostni sistem z zaščitnimi preprogami Popolna zaščitna ograja Motorizirana preproga za odvod odrezkov

Stanje: rabljeno, Tehnični podatki Območje obdelave - X = 3200 mm - Y = 1250 mm Dimenzije obdelovanca - Dolžina X: 200 – 3200 mm - Višina Y: 35 – 1250 mm - Debelina Z: 8 – 60 mm - Največja teža obdelovanca: 50 kg Referenčni sistem obdelovanca Predhodno pozicioniranje obdelovanca v vzdolžni smeri (smer X) poteka v območju nalaganja na levi strani stroja s pomočjo opore, ki je nameščena v fiksni poziciji na delovni mizi. Enota za pozicioniranje obdelovanca Sistem za pozicioniranje obdelovanca v smeri X poteka s pomočjo dveh vpenjalnih čeljusti, ki obdelovanec držijo med fazo obdelave. Gibanje poteka s pomočjo dveh neodvisno pogonjenih servomotorjev. Površina za namestitev obdelovanca Površina za namestitev obdelovanca, na kateri se nahajajo obdelovalne enote, je sestavljena iz vrste z gumo oblazinjenih valjev, ki tvorijo referenco obdelovanca v smeri Z. Na nasprotni strani obdelovalne enote je nameščen sistem proti pritisku, ki optimalno drži obdelovanec v stroju. Transformator in priključek za napetost za napetosti 380 – 415 V (+-10 %), 50/60 Hz Klimatska naprava za električno omarico krmilnik bSoilid Komplet HP za hitro premikanje vpenjalnih čeljusti obdelovanca Kombinirani sistem s servomotorjem in natančnim planetarnim menjalnikom omogoča hitrosti gibanja do 110 m/min s hitrimi pospeševalnimi ramponami. Ndjdpozutraofx Akhoc Pedi za potrditev za odpiranje/zapiranje vpenjalne čeljusti Vrtalna glava BH28 z individualno nastavljivimi vreteni - 17 vertikalnih vreten (7 v smeri X, 10 v smeri Y) - 5 horizontalnih vreten (3 v smeri X, 2 v smeri Y) - 1 enota krožne žage s fiksno smerjo delovanja v smeri X Električno vreteno 11 kW s prilagodnikom HSK-F in osjo „C“ Torque - 11 kW, 24000 vrt/min v obratovalnem načinu S1 - 6000 – 24000 vrt/min, programirljivo prek NC Kotna žagana enota HSK F63 za žagine liste - Največja hitrost vrtenja 8.400 vrt/min Vrtalno-frezalna enota za zgornji in spodnji rob / čelna vrtalno-frezalna enota - Največja hitrost vrtenja 9.000 vrt/min - Oprema za orodje z vpenjalno čeljustjo ER20 8-stopenjski magazin za zamenjavo orodja – izmenjevalnik plošč Komplet dodatne opreme "Občutljive površine" za transport obdelovancev Laserska naprava za ročno branje QR kod SOPHIA – IoT povezava Lesena mozek Ø8x40 mm in enota za vstavljanje lepila Barcode2Hops z variabilami Nadgradnja MultiPost POST_razdelilnik elementov NC-Hops 7.0

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, Hidravlična pločevinasta strižna strojnica Njdpsz Ny Ntofx Akhsdc Proizvajalec: ATLANTIC, tip: ATS 2012 Letnik izdelave: 2010 Tehnični podatki Proizvajalec: ATLANTIC Tip: ATS 2012 Letnik izdelave: 2010 Velikost pločevine: 2000 x 12 mm Nastavitev kota striženja: 0,5 – 3 stopinje Višina delovne površine: 900 mm Moč motorja: 22,5 kW Dimenzije: približno D 3,20 x Š 1,50 x V 2,30 m Teža: približno 8 t Oprema • Kotni vodnik • Podpirni roki • Ročna nastavitev širine reza • Avtomatska nastavitev kota striženja • Motoriziran zadnji vodnik Vse informacije so podane brez garancije. Predstavitev je mogoča kadarkoli v našem razstavnem prostoru.

Stanje: dober (rabljeno), Leto izdelave: 2017, V imenu stranke ponujamo naprodaj približno 10 let star stroj Biesse v dobrem stanju. Primerna naložba za začetek nove proizvodnje z nizkim proračunom. Ndjdpfx Aoywup Uskhjc

Stanje: rabljeno, številka stroja/vozila: 007641, Type of applied edge: thin edge, thick edge, solid wood Adhesive system: EVA, PUR Edgebanding machine: Machine 1 Max. panel width: 1200 mm Njdpfjwuz R Hsx Akhsdc Working units, right side: 8 units Working units, left side: 9 units

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in one line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 – 3 Panel Thickness (min/max) mm: 10 – 60 Working Width (min/max) mm: 240 – 2700 Control: PC Base Windows / Software SINITRA Feed Speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam Pitch (mm): 500 FORMATTING UNIT (for each side): Protective cutter (pre-milling) AS 10 (5.8 kW), pneumatic Njdju Rc Anepfx Akhodc 2 x hogging units DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING SECTION (for each side): 1st Gluing Unit (hot-melt adhesive + pre-melter) SP30 (High Melt + Edge Control EC 40) 2nd Gluing Unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled). Edge magazine for rolls (6 positions) End trimming unit IT 90-X (0.65 kW x 2) 28 m/min. 0 – 25° Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC controlled) RF 40 (1 x 2 kW) 0 – 25° Multipurpose unit (radius and profile milling unit) AR 80 (0.65 kW x 2) 25 m/min ROTAX. 8+8 position turret (max. 25 m/min) Motors with automatic tool change (tools) Multi-profile scraper unit (CNC controlled) RB 40 (multi-profile) Flat scraper unit RC 20 + spray unit (for polishing liquid) Buffing unit SZ 30 (0.37 kW x 2)

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) Ndjdpfxjywk Elj Akhjc - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: rabljeno, Leto izdelave: 2025, Pregled Ta popolnoma avtomatska naprava za čiščenje in polnjenje KEG sodov proizvajalca ATS Wibbing GmbH iz leta 2025 je sestavljena iz zunanjega stroja za pranje KEG (AW 75), naprave za čiščenje in polnjenje KEG (HRF 101) ter celotnega sistema za dovajanje in transport. Naprava je zasnovana za obdelavo različnih formatov KEG sodov. Z zmogljivostjo približno 30–35 KEG/h je primerna za male in srednje velike pivovarne ali proizvajalce pijač. Opremljena je s Siemens S7-1500 krmilnikom in zaslonom na dotik (HMI), kar omogoča popolnoma avtomatsko delovanje z vodeno uporabniško vmesnikom. Obseg dobave vključuje popolni transportni sistem, zalogovnike z dozirnim sistemom in merjenjem prevodnosti ter vso potrebno cevno povezavo med strojem in medijskimi rezervoarji. Sistem je na voljo z 2-letno proizvajalčevo garancijo in je dobavljiv v približno 2–3 mesecih. Priložena projektna postavitev prikazuje celotno razporeditev sistema, vključno s pralnim strojem za KEG, napravo za čiščenje/polnjenje, transportnimi odseki, pripomočkom za ravnanje s paletami, oskrbovalno postajo in ekspanzijsko posodo. Ndedpfey Rk Igox Akhoc Tehnični podatki - Proizvajalec: ATS Wibbing GmbH - Tip stroja: popolnoma avtomatska naprava za čiščenje in polnjenje KEG sodov - Glavne komponente: ATS zunanja pralna naprava AW 75, ATS čistilna in polnilna naprava HRF 101, dovajalni in transportni sistem - Leto izdelave: 2025 - Razpoložljivost: približno 2–3 mesece - Zmogljivost: približno 30–35 KEG/h - Primerni KEG formati: inox KEG, Plus-KEG, Party-KEG, posode, premer: 160–420 mm, višina: 280–600 mm - Krmilni sistem: Siemens S7-1500 - HMI: zaslon na dotik z vodeno uporabo - Zunanji pralni stroj AW 75: indeksirano kontinuirano delovanje, krožno kopel cca 270 l, črpalka za pršenje 2,2 kW, vrečasti filter z nadzorom tlaka - Čistilno in polnilno postajo HRF 101: elektro omara iz nerjavečega jekla, popolnoma avtomatski postopek čiščenja in polnjenja - Transportni sistem: valjčna in verižna steza, popolna električna in senzorska opremljenost, vključno s kabelskimi kanali - Oskrbeni sistem: 4 zloženi rezervoarji (po 150 l, uporabna prostornina 120 l), 3 rezervoarji z gretjem, inox črpalke, uravnavanje temperature in zaščita pred suhim tekom, prikaz temperature in nivoja, 2 sistema za merjenje prevodnosti z dozirnimi črpalkami, kompletna cevna povezava med strojem in rezervoarji, nadzor tlaka in temperature za izdelek, CO₂, sterilni zrak in paro, ločena elektro omara - Ekspanzijska posoda 150 l - Pripomoček za ravnanje s paletami - Potrebni mediji: sterilni zrak: cca 3 bar, delovni zrak: cca 6 bar, CO₂: cca 2–3 bar, para: max 3 bar, vodovod: min. 50 °C - Garancija: 2 leti proizvajalčeve garancije

Stanje: rabljeno, številka stroja/vozila: 008013, Delovno območje os X: 5780 mm Delovno območje os Y: 1650 mm Delovna površina: Z vakuumskimi konzolnimi podstavki Moč glavnega vretena: 13,2 kW Število krmiljenih osi: 4 osi Največja višina roba: 60 mm Število vrtalnih vreten: 16 Nsdpfx Akjwuz Ekehedc Število orodnih mest: 16

Stanje: zelo dobro (rabljeno), Double-sided – First machine in a production line Double-sided (1 LEFT single-sided machine + 1 RIGHT single-sided machine) Edge thickness in rolls (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 100 / 1200 Nodpfou Rc Hysx Akhedc Control: PC-based, Windows / PC software / SINTRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER CNC) EDGING PROCESSING (for each side): Spray unit (for liquid non-stick agent) No. 2 hoggers DT 10 (5.8 kW x 2) Free space EDGEBANDING UNIT (for each side): 1st gluing station (hot melt + pre-melter) SP 30 (high melt + Edge Control EC 40) 2nd gluing unit (pre-melter with hot air) Air Force System Edge pressure zone (CNC-controlled) + edge magazine for rolls (no. 6 positions) Pre-milling unit RS 10 (2 x 2 kW) Multi-profile milling unit (CNC-controlled) RF 40 (2 x 1 kW) 0°–25° No. 1 universal routing unit for grooving/rebating/profiling EB 60 (1 x 5 kW) – ISO 30 motor Multi-profile scraper unit (CNC-controlled) RB 40 Flat scraper unit RC 20 Spray unit (for polishing fluid) Buffing unit SZ 30 (2 x 0.37 kW)

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.300 mm, število vreten: 21, hitro pomikanje X-os: 80 m/min, hitri pomik os Y: 60 m/min, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,200 mm Travel range Y-axis: 1,300 mm Traverse speed X-axis: 80 m/min Traverse speed Y-axis: 60 m/min Traverse speed Z-axis: 25 m/min Number of traverses with vacuum suction: 6 Spindles Number of vertical drilling spindles: 15 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 2 Total number of spindles: 21 Ndjdpeytr Ryofx Akhec Milling unit Number of axes: 3 Max. speed: 24,000 rpm Motor power: 9 kW Tool changer Number of positions: 10 MACHINE DETAILS Total power requirement: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and cutters are not included. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and is solely responsible for installation, securing, and operation of the machine at the destination. External reference: 8174

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 6.170 mm, pomik osi Y: 1.395 mm, pomik po osi Z: 180 mm, premer vrtanja: 35 mm, največja hitrost vrtenja: 24.000 obr/min, Submitting a bid obligates timely collection by the end of May! TECHNICAL DETAILS Travel Range X-axis: 6,170 mm Travel Range Y-axis: 1,395 mm Travel Range Z-axis: 180 mm Ndjdpfx Aey Iwuhskhsc Spindle Main spindle power: 7.5 kW to 12 kW Max. speed: 24,000 rpm Tool holder: HSK F63 Drilling Head Vertical spindles in X-direction: 10 Vertical spindles in Y-direction: 10 Horizontal spindles in X-direction: 6 Horizontal spindles in Y-direction: 2 Max. drilling diameter: 35 mm Usable length: 45 mm Max. reach: 60 mm Tool Changer System Turret tool changer capacity: 18 tools Mount: ISO30 / HSK F63 Max. tool diameter: 200 mm Max. tool length: 160 mm Working Length: approx. 7,300 mm MACHINE DETAILS Clamping and Vacuum System Vacuum pump performance: 90 m³/h Uniclamp clamping unit workpiece thickness: 4,098 mm Electrical Connection: 400 V / 50 Hz / 3 phases Power: 22 kW Compressed Air Connection: 3/8" Operating pressure: 6 bar Consumption: approx. 400 NL/min Extraction Connection diameter: 250 mm Air requirement: 5,300 m³/h Air velocity: 30 m/s Pressure loss: 1,500 Pa Dimensions & Weight Dimensions (L x W): approx. 8,850 x 4,020 mm Machine weight: approx. 4,750 kg EQUIPMENT Portal construction with movable processing unit 10 consoles with adjustable vacuum supports 30 adjustable support elements Multi-zone vacuum system Automatic central lubrication Chip conveyor Spindle air blast unit Pneumatic preparation system Safety features according to Directive 98/37/EC CNC control (Biesse system)

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Double fine millers, top and bottom 2 pre-milling units Milling unit Ndedpfx Akeyq Avhehec Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: rabljeno, moč: 37 kW (50,31 KM), vrsta prenosa: drugo, vrsta goriva: dizel, barva: rumena, skupna masa: 4.700 kg, lastna masa: 4.260 kg, največja dovoljena obremenitev: 440 kg, konfiguracija osi: 4x4, število sedežev: 1, prva registracija: 01/2000, zavore: drugo, Leto izdelave: 2000, obratovalne ure: 6.320 h, voznikova kabina: dnevna kabina, medosna razdalja: 1.950 mm, Oprema: dodatne luči, kabina, pogon na vsa štiri kolesa, vilice za palete, * German machine * 6,320 operating hours * All-wheel drive * Condition as per photos * Articulated Komatsu WA 63-3 * Turning radius: 3,640 mm * Articulation angle: 40° * Hydraulic 4-point quick coupler * Loader bucket: 0.7 m³ – bucket width: 1,850 mm * Bucket pivot height: 3,115 mm * Planetary rigid axles with automatic locking differentials on both axles * EasyDrive (hydrostatic drive) (SN) * 1st travel range: 0 – 5.6 km/h | 2nd travel range: 0 – 20 km/h * Hydrostatic steering * Hydraulic working pressure: 200 bar * Servo-controlled hydraulic operation * Towing device * ROPS and FOPS comfort cab * Double-door safety driver's cab, compliant with DIN/ISO * User-friendly operation via multifunction joystick * Comfort driver's seat * Delta lifting frame * Sliding window, right side * Heater * Heated rear window * Full all-round glazing * Optimized sound insulation * Engine: Komatsu type Komatsu 4D 94E – 37 kW – 2,775 cc * Easy maintenance * Wide-opening engine hood * Side maintenance hatch * Wheelbase: 1,950 mm * Track width: 1,450 mm * Weight: 4,700 kg Njdszcbumopfx Akhodc If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. Further trucks are available on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the equipment to prevent any misconceptions regarding the condition and suitability for the buyer. Inspections and checks are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Robna lepilka BIESSE Jade 340 Predhodna obdelava s rezkanjem Lepilna enota Odrezovalna, kotna enota Radialni ciklin Ciklin za lepilo Polirni agregati Razpršilni ventili spredaj in zadaj Dodatni zamenljiv lepilni lonec Naprava je v stalni uporabi. Letnik proizvodnje: 10/2018. Ndsdpfozcxyyex Akhoc

Stanje: rabljeno, številka stroja/vozila: 008250, Pozicija 1: Enostranski stroj za lepljenje robov BIESSE-STREAM B1 9.0 Pozicija 2: Transfer BIESSE-STREAM B1 9.0 Ndedpfox Dipmox Akhjc Pozicija 3: Enostranski stroj za lepljenje robov BIESSE-STREAM B1 9.0

Stanje: dober (rabljeno), Leto izdelave: 1987, številka stroja/vozila: A20072, Ponudba 26300 Tehnični podatki: - maks. delovna širina 3050 mm - maks. zmogljivost rezanja St 40 12 mm - nastavljiv kot rezanja 0,5 - 3 ° - ročno nastavljanje razmika med rezili - število hidravličnih pritrdilnih naprav 18 kos - nastavljiv zadnji omejevalnik 10 - 1000 mm - sprednji kotni omejevalnik Ndedpfx Akozw Dt Hohec - število gibov, odvisno od kota rezanja in dolžine reza 7 - 17 na minuto - hidravlični pogon 400 V / 22,5 kW - višina mize 770 mm - potreben prostor pribl. Š 4100 x V 2030 x G 2030 mm - teža pribl. 8500 kg - vključno z: - električnim nožnim stikalom - osvetlitvijo linije reza

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: 77503, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, hitrost pomika os X: 25 m/min, skupna masa: 6.510 kg, proizvajalec krmilnikov: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control: Sintra Weight: 6,510 kg EQUIPMENT Ndjdsydidrspfx Akhec Sanding unit Coil holder magazine with 2 positions and automatic edge change via C.N. Glue unit for EVA hot-melt adhesive with pre-heating device and glue pot Preparation for glue unit for PUR adhesive Edge pressure group for straight profiles with electronically adjustable pressure rollers via C.N. End trimming unit with 2 motors and automatic tilt adjustment Filler unit with 2 vertically aligned motors Edge smoothing unit with 2 swiveling motors Multifunctional 4-motor corner rounding unit (smoother + corner rounder) with automatic adjustment via numerical control Anti-adhesive group Adjustable edge scraper group Glue-saving unit Oscillating brush group Electronically adjustable working height Motorized rubber belt with increased pressure Motorized and electronically adjustable panel guide Side roller conveyor with idler rollers for panel support