Beco Dosimat 60 nakup rabljenega (21.501)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, obratovalne ure: 28.748 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 570 kg, skupna masa: 20.000 kg, kapaciteta rezervoarja za olje: 600 l, moč: 37 kW (50,31 KM), volumenski pretok: 350 m³/h, Technical Data for Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of manufacture: 2015 Total operating hours: 30,143 hours (as of July 2025) Effective pump runtime: 6,527 hours (as of July 2025) Number of bales pressed: 115,193 (as of July 2025) Pre-press force: 25 t Main press force: 60 t Specific pressing force: 73 N/cm² Feed hopper dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Theoretical throughput: 800 m³/h Throughput under operating conditions: 350 m³/h Bale dimensions: 1,100 x 750 mm Drive power: 37 kW Binding: 5-fold vertical, fully automatic Throughput at bulk density of 50 kg/m³: 11 to 14 t/h Bale weights: 420 to 570 kg (material dependent) Hydraulic oil tank volume: 600 L Baler dimensions (assembled with hopper): 10,100 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine weight (baler): approx. 20 t Condition of the baler: The baler was partially overhauled in our workshop and subsequently tested in both manual and automatic modes. The following maintenance work was performed: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully emptied and cleaned - Oil and air filters replaced; new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers of the press ram removed and replaced - Grease cartridges of the automatic roller lubrication system replaced - Slide rails at the press floor in the pressing chamber cut out - Undercarriage reinforced with welded plates - New HARDOX slide rails welded in - Wire station with guide pulleys for lower wire cleaned and made operational - Slide rails on press channel floor cut out - New HARDOX slide rails welded in - Both side walls of the press channel removed and derusted - Worn side wall plates cut out - Complete side walls fitted with new wear plates and welded - Main hydraulic cylinder disassembled and inspected Bdodpfx Agevn Tg Ijtjb - Piston rod replaced, cylinder barrel honed - Complete seal kit renewed; pressure test performed - Vertical needle system for binding disassembled, cleaned, wire guide pulleys serviced - Chain cleaned and lubricated; chain tension reset - Drillomat cleaned; wire cutter, drill shafts and twisting fingers checked, retightened to specified torque and serviced - Machine inspected, general maintenance performed, and press tested in both manual and automatic modes Notes: The baler is sold without conveyor belt and without wire stations. Inspection by arrangement possible. We assume no liability for technical data or any errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of Bsdpfx Aoviwdmsgtodb 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 5.862 h, nosilnost: 2.500 kg, dvižna višina: 6.640 mm, prosto dvigovanje: 2.100 mm, težišče tovora: 500 mm, tip droga: triplex, gradbena višina: 2.925 mm, Description STILL RX 60-25 Année de fabrication : 2017 Heures de service : 5 862 heures Capacité de charge : 2 500 kg Mât : Triplex avec levée libre totale Hauteur hors tout : 2 925 mm Levée libre : 2 150 mm Levée nominale : 6 640 mm Hydraulique auxiliaire : simple Accessoire : Déplacement latéral Cabine : Cabine complète avec chauffage Commande hydraulique : 2 mini-leviers Siège : MSG 75 à suspension pneumatique avec chauffage Éclairage : Éclairage réglementaire (STVZO) Phares de travail : à l’avant et à l’arrière Bsdpfexc U Ixox Agtedb Blue-spots : oui Batterie : plomb-acide 80 V 2023 Chargeur : adapté/inclus L’appareil est vendu en état révisé, techniquement et visuellement, avec un contrôle de sécurité valide (UVV) et un entretien récent. La garantie est de 6 mois après livraison, à l’exception des pièces d’usure et des dommages causés par le client. L’appareil peut être visité et testé sur rendez-vous. Un transport peut également être proposé en option.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, številka stroja/vozila: SN49983, Funkcionalnost: popolnoma funkcionalen, Komorna peč, zelo dobro stanje. 12 mesecev garancije - Najvišja temperatura 1300 °C - Notranje mere Š x G x V: 400 x 400 x 400 mm - Prostornina 60 litrov - Ločeno glavno stikalo - 5-stransko ogrevanje - Dovod in odvod zraka z loputami, električno poganjani prek Belimo pogonov - Ventilator za dovod zraka upravljan s frekvenčnim pretvornikom prek regulatorja - Krmilni sistem JUMO (možnost preklopa v druge jezike!) - Dodatni zapisovalni element tipa S za zunanji zapis - Dokumentacija - Lastna teža 250 kg - Priključna moč: 18 kW - Tokovna poraba: 26 amperov - Priključna napetost: 3/N/PE 400VAC - Način priklopa: pripravljen za fiksni priklop, vtič 32 A - Dokumentacija, CE izjava - Električno preverjeno z aktualnim DGUV merilnim protokolom Bjdpfsx U Ekdex Agtjdb Ogled po dogovoru. Peč, Peči, Žarilna peč, Industrijska peč, Komorna peč, Žgalna peč, Peč za žganje, Temperirna peč, Laboratorijska peč, Kalilna peč

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: M313, Technical Specifications & Performance Data This MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a compact, rotating platform. Designed for handling PET bottles and still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. Featuring fully automatic operation, weight-based (gravimetric) filling, and a robust rotary carousel design, this unit is ideal for upgrading a used filling line or expanding the capacity of a second-hand beverage production plant with modern automation. Manufacturer: MESAL Model: E50-60-15GA1 Year of manufacture: 2013 Output: up to 18,000 bottles/hour Configuration: Rinsing/Filling/Capping tri-block Filling valves: 60 Rinser grippers: 50 Capping heads: 15 Container type: PET Base format: 0.38 L (380 ml) Neck finish: 38 mm Filling principle: Weight-based (gravimetric) filling Operation mode: Automatic Power supply: 400 V, 60 Hz Control: Omron PLC/HMI Approx. weight: 8,000 kg Advanced Automation & Control Systems The machine is equipped with an Omron PLC-based control system and a touch HMI for efficient operation, diagnostic functions, and format changes. Automated bottle handling through rinser, filler, and capper ensures smooth transfer between carousels, with synchronized movement and recipe-controlled settings to minimize changeover times. The electrical specifications are tailored for industrial environments, and integrated safety interlocks provide protected access during operation. Omron PLC with modular I/O and clear status indicators Touchscreen HMI for parameter management and alarms Fully automatic operation with synchronized carousels Designed for stable, weight-based filling accuracy Power supply: 400 V, 60 Hz Production Line Integration Capability This filling monoblock can be seamlessly integrated into a complete beverage production line. Infeed and outfeed are designed for PET bottle conveyors, with intermediate conveyors between rinser, filler, and capper to ensure continuous material flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping within a compact footprint. Inline integration with standard bottle conveyors Rinser/Filler/Capper tri-block layout for reduced footprint Bedpsyhbgajfx Agtodb Suitable for still beverages: juice and tea Designed for PET bottles with 38 mm neck Base format 0.38 L; additional formats possible with changeover parts Machine Condition & Maintenance History The machine is ...

Stanje: rabljeno, Krožeči medij 25 °C Hladilna zmogljivost 10 kW Bjdpfsy Erz Dox Agtjdb Električna priključna moč 5,45 kW Obratovalna/krmilna napetost 400-415/24 V / 50 Hz Nazivni tok / maksimalno varovalo 15,2 / 25 A Po naši oceni so temperirne enote v dobrem rabljenem stanju. Ponudba zajema 2 kosa. Dodatna oprema, prikazana orodja in vpenjalni pripomočki so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Stanje: dober (rabljeno), teža obdelovanca (maks.): 80.000 kg, premer brušenja: 1.580 mm, dolžina brušenja: 7.500 mm, Manufacturer: Farrel Model: 60" x 24" Heavy Duty Bdodpor Ikvmsfx Agtob Year of manufacture: 1960 Travelling wheel grinder featuring crowning and concaving grinding capabilities. Equipped with grinding stones, flanges, lubrication system, and coolant system. Maximum full-size wheel diameter: 1550 mm Work piece swing over bed: 1580 mm Maximum workpiece weight: 180,000 lbs (81,000 kg) Maximum grinding length: 7500 mm Specifications (Metric | Imperial): - Centre height: 930 mm | 36.61 inch - Max. grinding diameter: Ø 1860 mm | 73.23 inch - Max. grinding length: 7500 mm | 295.28 inch - Grinding wheel dimension: 1080 x 180 mm | 42.52 x 7.09 inch - Grinding wheel speed: 100 – 400 rpm - Tailstock: 260 x 1250 Mk / 10.24 x 49.21 inch Mk - Coolant system: Yes - Filtration system: Yes Approx. machine dimensions: - Length: 13,200 mm | 519.68 inch - Width: 4,250 mm | 167.32 inch - Height: 3,200 mm | 125.98 inch - Weight: 80,000 kg | 176,370 lbs Please note: The information provided here has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Therefore, we accept no liability for representations or contract terms. We recommend verifying all critical details independently. Fields of application: - Aluminium industry - Non-ferrous metal industry - Paper industry - Roll manufacturers - Steel industry - Plate mills - Hot rolling mills - Cold rolling mills

Stanje: rabljeno, Leto izdelave: 1979, Tlak 40 t Razdalja med stebri 620 mm Hod 975 mm Razdalja miza/bat, velik hod zgoraj, nastavitev zgoraj 940 mm Površina mize 590 x 1000 mm Višina mize nad tlemi 770 mm Površina bata 590 x 1000 mm Stranski prehod med stebri 470 mm Maks. teža kalupa 2,5 t Maks. nosilnost odklopne plošče 1,5 t Hitrost navzdol 0 - 50 mm/s Hitrost navzgor 0 - 34 mm/s Delovna hitrost 0 - 10 mm/s Vsebnost olja 150 l Pogonska moč 9,5 kW Teža 3,2 t Bsdpfx Aeyx Ingegtedb Prostorske zahteve (ŠxGxV) 2,0 x 2,4 x 3,0 m S preklopnim batom, izvlečno mizo, izmetalcem v mizi

Stanje: novo, prostornina tovornega prostora: 60 m³, skupna širina: 2.550 mm, skupna višina: 3.930 mm, Leto izdelave: 2026, Oprema: ABS, OMEPS Tipping Silo Semi-Trailer----Type: CR 60 Chassis: Two fully automatic welded I-beam main longitudinal members with welded cross members, chassis width 1,400 mm, 2" kingpin; tipping cylinder: Hyva Axles and Suspension: Disc brakes 22.5", SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm; lift and lower valve, loading pressure gauge mounted at the top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring; 1st axle liftable without tractor unit, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with 385/65 R22.5 tires, brand at manufacturer’s discretion, on Alcoa Dura Bright aluminum rims, 11.75x22.5 offset 120 Braking System: EBS 4S/2M WABCO pneumatic braking system with RSS, according to standard 98/12/CE - ECE R13/09; connected brake pad wear indicator Landing Gear: Mechanical landing gear with two speeds, 2x 20t carrying capacity with tilting feet; rear with crank supports Electrical System: All lights in LED version; 24 volt electrical installation consisting of: One 15-pin socket in front of the fifth wheel mounted on the chassis beam, yellow side marker lamps as required, rear position lamps, front marker lamps, rear license plate lamps, lights according to standard 97/28/CE-2007/35/CE; 2 multi-chamber lamps at the height of the turntable mounted in aluminum brackets according to standard 97/28/CE-2007/35/CE; 1 LED work lamp on the tank; yellow warning lamp at the rear, mounted at the height of the hose pipes; 2x reversing lights on the underrun protection, 2x reversing lights at the height of the support legs (each switchable on the energy console) Tank Specifications: A horizontal tank fabricated from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn); single-chamber tank with 60,000 liters capacity, tank warranty: 24 months from delivery Operating Parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE; wall thickness approx. 5 mm; test pressure 3.0 bar, operating pressure 2.0 bar; operating temperature -40°C to +80°C Loading Options: 5 manholes DN 450 with pivoting and foldable dome covers; each secured pressure-tight with 4 wing nuts; rubber supports for dome cover storage on top; rain gutter closed at the front, open at the rear Material Discharge: 1 material outlet cone DN 800 made of stainless steel, foldable, with INOX disc for loosening; material outlet cone can pivot laterally; shut-off valve DN 150 with white seal; connection: STORZ-A Air Piping: A 2.5'' stainless steel air collection pipe installed on the right operator side; a 4" stainless steel air distribution pipe mounted at the rear of the tank; air valves (shut-off valves) in stainless steel; top air and air connection hoses with 2" STORZ couplings; micron filter; vacuum valve on top of tank; 1x vibrator 1 meter in front of the turntable Ladder and Walkway: Bsdjy Ii Dzopfx Agtsdb 1 aluminum ladder mounted rear left on the vehicle; 1 aluminum safety scissor rail with a separate folding ladder part deployable from below and a parking brake when opened; 1 aluminum safety walkway guided on the left along the top of the tank; anti-slip coating on the tank Delivery Hose Storage: 4 hose pipe holders, 5 m length DN 200 made of aluminum, with 4 hoses DN 100 and STORZ couplings; hose holder with compressor hose D.76 Accessories: The side underrun protection is in anodized aluminum version

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Konfiguracija vretena 1. Vreteno: Poravnalno vreteno – 4 kW 2. Vreteno: Desno vertikalno vreteno – 5,5 kW 3. Vreteno: Levo vertikalno vreteno – 5,5 kW 4. Vreteno: Zgornje horizontalno vreteno – 4 kW 5. Vreteno: Spodnje horizontalno vreteno – 4 kW 6. Vreteno: Univerzalno vreteno – 4 kW Hitrost vretena: 6.000 obr/min Premer vretena: 40 mm Delovno območje Delovna širina: 25–230 mm Delovna višina: 10–120 mm Min. dolžina obdelovanca: 450 / 630 mm (odvisno od izvedbe) Podajanje Brezstopenjsko nastavljivo: 5–25 m/min Bdjdpfx Agoyym Nretob Podajalni valji Ø 140 mm Vstopna miza 2.000 mm Območja orodij Vertikalna vretena: 100–180 mm Horizontalna vretena: do 180 mm Maks. globina profila vertikalno: 40 mm Oprema Ročno mazanje mize in centralno mazanje Močna industrijska izvedba, mirno delovanje in natančnost

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: MH-FJ-1AWS_1, Stroj za zapiranje kartonov tipa VOGEL MH-FJ-1AWS je opremljen s stranskim pogonskim trakom. Stroj je posebej zasnovan za manjše formate kartonov. Formati kartonov: Dolžina 160 – ∞ mm Širina 90 – 320 mm Višina: 60 – 280 mm Tehnični podatki: Bsdpfx Agey Drlgetsdb Dolžina 1.090 mm Širina 890 mm Teža 85 kg Obratovalna napetost 220 V CE oznaka Dodatna oprema: Za naš program zapiranja kartonov VOGEL nudimo dodatno vodilna kolesca, vhodne in izhodne mize ter valjčne proge.

Stanje: rabljeno, RENISHAW OMP 60 3D-merilna tipala SK40 Bodey Dia Ispfx Agtjdb Stanje: Stekleni pokrov poškodovan, vendar funkcionalnost ni prizadeta.

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stroj za razrez stekla Lisec, ki potrebuje popravilo. Območje debeline stekla: 3mm-12mm, minimalne dimenzije stekla X/Y: 1600mm/1600mm, maksimalne dimenzije X/Y: 6000mm/3210mm, maksimalna hitrost rezanja: 120m/min, maksimalna transportna hitrost: 40m/min, natančnost reza: +/-0,15mm, maksimalna obremenitev mize: 35kg/m², maksimalna nosilnost: 600kg, teža: cca 6400kg. X-os stroja ima napako. Stroj omogoča poševno in krožno rezanje ter samodejno brušenje robov stekla. Dokumentacija je na voljo. Ogled na lokaciji je možen. Bdodpfey Eg A Njx Agteb

Stanje: novo, TIGERMETAL WH60 – Hydraulic Workshop Press 60 Tonnes | Electric + Hand Pump Instead of €9,237 gross RRP, now only €5,899 net (€7,020 gross incl. 19% VAT). You save -24% compared to RRP! The TIGERMETAL WH60 workshop press is a powerful and robust solution for demanding pressing operations in workshops and industrial environments. With a pressing force of 60 tonnes, this machine is ideal for straightening, pressing, and bending a wide variety of workpieces. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast workflows in automatic mode and precise fine adjustment for sensitive applications. The heavy-duty steel construction and laterally adjustable cylinder enable versatile applications while ensuring high stability and safety. 🔧 Technical Data: Model: WH60 Manufacturer: TIGERMETAL Pressing force: 60 tonnes Drive: Electric motor + hand pump Motor power: approx. 2.2 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 265 bar Stroke: approx. 400 mm Clear width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 670 kg Advantages: ✔ Combined operation (electric + manual) ✔ High pressing force for industrial applications ✔ Precisely adjustable pressure for accurate work ✔ Laterally movable cylinder ✔ Stable, durable steel frame construction ✔ Integrated pressure gauge for monitoring ✔ Safety valve for overload protection ✔ Expandable with accessories (e.g. prisms, supports) Bedef Sqcrjpfx Agtjdb Many other workshop presses available in various models, sizes, and with optional accessories! Some images show a slightly different model than the one offered here. The version shown in the pictures is also equipped with an automatic function. Versions: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We are also happy to design a custom press tailored to your requirements. The hydraulic cylinder is mounted in a carriage, allowing it to be moved laterally. This way, you can make optimal use of the maximum frame passage width. A demonstration machine can be tested under power at our premises. ----- Please feel free to contact us – we are happy to advise you without obligation. ----- The stated price is net plus 19% VAT. All information subject to change without notice. Europe-wide delivery available! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations take place via telecommunication (email, fax, telephone, messaging portal), where we initially provide you with a non-binding offer and inform you of our general terms and conditions and the right of withdrawal (including imprint) before concluding a sale or contract.

Stanje: zelo dobro (rabljeno), Robot ABB IRB4600-60/2.05 in krmilnik IRC5 RAZVOJ GSG ROBOTICS Podjetje GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marl od leta 2015 in ponuja obsežno servisno območje za vzdrževanje in popravila robotov. Skozi leta smo postali celovit partner za vsa vprašanja v zvezi z industrijskimi roboti in avtomatizacijsko tehnologijo. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov, ABB in Fanuc. Bdedpfxsxq Tq Ij Agteb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, vpenjalna sila: 1.000 kN, Arburg 420C-1000-60-150 (123) 2-component with robot and safety cage Year of manufacture: 2004 TECHNICAL DATA Screw diameter [mm]: 18/30 Shot weight [g]: 17/65 Injection pressure [bar]: 2500/2210 Clamping force [kN]: 1000 Tie bar distance [mm]: 420x420 Platen dimensions [mm]: 570x570 Minimum mould height [mm]: 250 CONTROLS Control system: Selogica Monitor: Yes Control cabinet: Yes Language: German OTHER Power [kW]: 34.5 Operating hours [h]: 61,792 Dimensions [m]: 4.6 x 1.8 Weight [kg]: 4000 CR – Core pull R – Handling or robot ZP – Air valve Bdsdpfx Aevt Rwuegteb Without hopper

Leto izdelave: 2023, stanje: novo, SEMX compact concrete batching plants are designed for limited space conditions and easy overseas transport. The SEMIX Kompakt 60 fits into two containers and can be fully assembled within 3 days. The SEMIX Kompakt 60 is equipped with concrete mixers with a capacity of 1500/1000 liters, available as single-shaft or planetary mixers. Depending on the silicon content in the concrete mix, SEMIX concrete mixers use NiHard4 or Hardox 450 wear parts. All SEMIX aggregate storage bins have a trapezoidal shape for increased stability. The robust steel construction ensures a long service life. Aggregates are weighed in the weighing conveyor, which delivers the aggregates to the transfer mechanism. Bodpfx Agega D I Rotedb SEMIX compact concrete batching plants offer a variety of aggregate transfer mechanisms. Even in compact batching plants, users can choose either a skip hoist mechanism or a transfer conveyor for aggregate transfer. All SEMIX concrete batching plants are controlled by a SCADA system with integrated Schneider PLC. Users can track all materials used and integrate their CRM system. For service purposes, the SEMIX engineering team can access the automation system online.

Leto izdelave: 2023, stanje: novo, The SEMIX Mobile 60 S4 is equipped with concrete mixers with a capacity of 1500/1000 litres, which can be configured as single-shaft, twin-shaft or planetary mixers. Depending on the silicon content in the concrete mix design, SEMIX concrete mixers use NiHard4 or Hardox 450 wear parts. Bedpegaw Ursfx Agtedb The aggregate storage bins can be loaded by wheel loaders using a single ramp. The aggregates are weighed on the weighing conveyor, which then transfers the aggregates to the transfer conveyor. Two separate conveyors ensure weighing accuracy and allow for higher concrete output. All SEMIX concrete batching plants are controlled by a SCADA system with an integrated Schneider PLC. Users can track all materials used and integrate them into their CRM system. For service purposes, the SEMIX engineering team can access the automation system online.

Leto izdelave: 2023, stanje: novo, SEMIX Compact concrete batching plants are designed for confined spaces and easy transport to overseas destinations. The SEMIX Compact 60 fits into two containers and can be fully assembled within three days. The SEMIX Compact 60 is equipped with concrete mixers with a capacity of 1500/1000 liters, available as either single-shaft or planetary mixers. Depending on the silicon content of the concrete mix, SEMIX concrete mixers utilize NiHard4 or Hardox 450 wear parts. All SEMIX aggregate storage bins are trapezoidally shaped for additional stability. The robust steel construction ensures a long service life. Aggregates are weighed in the weighing conveyor, which then transfers the aggregates to the handover mechanism. Bdjdpfx Ajga D Ncjgteb SEMIX compact concrete batching plants offer a variety of aggregate transfer mechanisms. Even in compact batching plants, users can choose either a skip hoist mechanism or a transfer conveyor for aggregate transfer. All SEMIX concrete batching plants are controlled by a SCADA system with integrated Schneider PLC. Users can track all utilized materials and integrate their CRM system. For service purposes, the SEMIX engineering team can access the automation system online.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 12.000 h, nosilnost: 5.000 kg, dvižna višina: 4.200 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.850 mm, vrsta prenosa: samodejen, model baterije: 6Pzs 930, napetost baterije: 80 V, Oprema: CE označba, kabina, vilice za palete, STILL RX60-50 NOSILNOST 5000 KG BOČNI POMIK KONSTRUKCIJSKA VIŠINA 2850 mm VIŠINA DVIGA 4200 mm BATERIJA IZ LETA 2020, 80 % OGREVANA KABINA Bsdpfx Agey Atkbetjdb MTH 12220

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 27.000 kg, skupna masa: 8.809 kg, konfiguracija osi: 3 osi, prva registracija: 06/2021, skupna dolžina: 14.040 mm, skupna širina: 2.600 mm, vzmetenje: zrak, barva: bela, Leto izdelave: 2021, Oprema: hladilna enota, popolna servisna zgodovina, servovolan, technical specification Refrigeration unit – THERMO KING SLXi 300, diesel and electric Axle manufacturer – Schmitz Rotos Full air suspension Insulated rear doors with 4 steel locking bars FP-insulated side panel, 45 mm Plastic toolbox with lid holder Plastic fuel tank, 245 l Electronic Braking System (EBS) Anti-lock Braking System (ABS) ROTOS SCB (disc brakes) Thermometer Ventilation flap in rear door Contact switch for rear door Aluminium floor Basket for 2 wheel chocks (6+1) tyres – 385/65R22.5 (11.75x22.5) Double-deck system with 22 beams Loading capacity 33/66 Euro pallets Length / Width / Height – 1340 cm / 249 cm / 265 cm Max. gross weight – 39,000 kg Unladen weight – 8,843 kg 3 axles Bdedpsyvfzkofx Agtob Pallet rack for 36 Euro pallets

Stanje: rabljeno, Leto izdelave: 2001, rabljen električno ogrevan bitumenski rezervoar - prostornina 40 m³ / 60.000 l - demontiran Bdedpfsxrpg Usx Agteb

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Neuporabljen, kot nov Tip: HZOS 100/60/1200/D/FU Premer bata: 100 mm Premer batnice: 60 mm Bdsdpfsyxqmlox Agtsb Hod: 1200 mm Dovoljeni tlak: 250 bar

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 150 kN, premer vijaka: 18 mm, For sale is an Arburg 220 S 150-60 183385. The machine is in good condition and fully operational. Technical Data: Clamping force: 150 kN Opening stroke: 275 mm Mold installation height: 150 mm Clear tie bar distance: 221 x 221 mm Injection unit: 60 Screw diameter: 18 mm Calculated shot volume: 20 cm³ Shot weight: 18 g/PS Injection pressure: 2500 bar Injection rate: 32 cm³ Net weight: 1900 kg Pump hours: 94,830 h Automatic operation hours: 85,152 h This offer refers only to the machine without tooling; tooling can be negotiated additionally. Transport and loading can be organized Europe-wide at an extra charge, upon request. Prices are plus VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase/Sale Bdsdpfx Agjyxnmpjtjb PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Stanje: rabljeno, OMA \ 60 \ A Stružnica za les, avtomatska z nalagalnikom, največja dolžina obdelovancev: 600 mm. Dimenzije: 240 x 140 x 175 cm. Približna teža: 2200 kg. Bdjdpfxsyhghvs Agtjb