Vapic Gmbh Popolni Vakuumski Sistem Za Topila nakup rabljenega (116.801)

Stanje: rabljeno, Leto izdelave: 2018, Pregled Ti fermentacijski rezervoarji (Iso-Tank) so bili izdelani leta 2018 pri nemškem proizvajalcu BrauKon GmbH. Sistem sestavljajo 3 fermentacijski rezervoarji, namenjeni fermentaciji piva. Rezervoarji so še vedno nameščeni, priključeni na električno omrežje in takoj na voljo. Oprema si je po dogovoru mogoča ogledati v obratovanju. Tehnični podatki Prostornina: vsak po 10 hl Uporaba: fermentacija piva Konfiguracija: 3 × Iso fermentacijski rezervoarji. Itodsywn Svopfx Al Njf

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, DYNASET Hidravlični vakuumski vedro HRVB Hidravlični reciklažni vakuumski vedro uporablja hidravlični sistem stroja ali vozila kot vir energije. Isdpfxjw Rgtde Al Nstf Hidravlično olje teče v integriran motor HCF hidravličnega centrifugalnega ventilatorja preko tlačne cevi. Ventilator pretvarja pretok in tlak hidravličnega olja v močan zračni tok. Uporabnik lahko hidravlični pokrov nastavlja iz kabine. Priročna sesalna cev na zadnji strani enote omogoča dodatno uporabo za ročno delo. Hidravlično olje se preko povratne cevi vrača v rezervoar nosilnega stroja. Dostava po vsem svetu neposredno iz zaloge.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 600 kg, vrsta vhodnega toka: Klimatska naprava, Watkiss PowerSquare 224 Offline / Manual Operation The machine is in excellent condition. Itsdpfxexn Rdaj Al Nsf The Power Square is not only versatile, but also extremely easy to operate and produces unbeatable professional-quality booklets. • Booklet maker for brochures up to 56 sheets / 224 pages with 80 gsm paper • High-performance wire stitching head (completely overhauled) • Product size: Min. feed size: 120 x 200 mm // Max.: 370 x 520 mm • Format adjustment automatic, wire length adjustment automatic • 2 new front trimming knives! • 1 - 6 stitches, evenly distributed along the spine. Staple-free booklets are also possible. • Wire from spool: up to 291,500 stitches • Machine has been completely overhauled and works without any defects. • Fully automatic machine setting • Immediately ready for operation / production starting from booklet 1 • Test run possible by arrangement, of course. • Automatic trigger • 230 volts / 600 kg • Formats from 120 x 200 mm up to 370 x 520 mm Produce unbeatable professional booklets with the PSQ 224. EUR 27,900.00 plus VAT. Shipping / delivery possible. All our offers are for used machines, which may show signs of use (minor scratches or yellowing). Collection possible, shipping possible, installation and instruction possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Bourg Document Finisher z ročnim podajalcem za vnos kompletov. Spenjanje, zgibanje, čelni obrez. 2 spenjalni glavi z žico iz tuljave. Sedlasto, blokovno in vogalno spenjanje. Električni priključek 230V/50Hz, 400 kg. Tehnični podatki v priloženem PDF-ju. Odlična naprava po odlični ceni. Iedexnl Hpjpfx Al Nstf

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: nepreverjeno, delovna širina: 1.300 mm, delovna višina: 110 mm, TEHNIČNI PODATKI Največja delovna širina: 1.300 mm Največja delovna višina: 110 mm Najmanjša delovna višina: 8 mm OPREMA Motorizirani podajalni valji 2 krtačni enoti Itsdpfeyqynujx Al Njf Stroj se prodaja in dobavi v dejanskem in pravnem stanju („kot videno in sprejeto“) na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico blago pred prevzemom pregledati in prevzema odgovornost za montažo, zavarovanje ter uporabo stroja na ciljni lokaciji. Zunanja referenca: 7615

Stanje: dober (rabljeno), Keyence RB-1200 3D Bin-Picking robotski vizijski sistem s kamero in krmilnikom Iodpeyrun Esfx Al Njtf Proizvajalec: Keyence Model: RB-1200 Tip: 3D vizijski sistem za robotsko izbiranje iz zabojnika Sistem: Industrijski sistem za slikovno obdelavo za samodejno prepoznavo delov Kamerna enota: Keyence RB-1200 Vision Sensor Komponente: Kamerna enota, vision krmilnik, montažni okvir s štirimi senzorskimi moduli Funkcija: 3D prepoznavanje in določanje položaja neurejenih delov v zabojnikih Področje uporabe: Avtomatizirano prijemanje in jemanje delov z industrijskim robotom Priključki: Industrijski komunikacijski vmesniki na krmilniku Obseg dobave: Kamerna enota, krmilnik, montažni okvir za senzorje, povezovalni kabli Stanje: Dobro Lokacija: Fulda

Stanje: dober (rabljeno), Leto izdelave: 2019, Proizvajalec: SICK Sistem: Sistem za pozicioniranje telesa Tip: RS259 Leto izdelave: 2019 Serijska številka: RS259-1/2019 Isdpsyrunxefx Al Notf Napajalna napetost: 230 V 50 Hz Nazivni tok: 1,5 A Krmilna napetost: 24 V DC Zaščitni razred: IP54 Senzorji: 4x SICK BPS5400-S Kataloška številka senzorja: 1099868 Kataloška številka krmilnika: 1099813 Sistem: BPS-EPAC Obseg dobave: krmilna omara, 4 merilne enote, priključni kabel Stanje: dobro, redko uporabljeno Lokacija: Fulda

Stanje: novo, Leto izdelave: 2024, Everything can be configured according to your requirements, with very short production and delivery times. We are happy to provide you with further information upon request. Technical specifications available upon request. Standard equipment: - Steel welded construction - DURMA CNC control unit (AURORA) - Remote diagnostics (Ethernet) - Lantek software with automatic nesting - Position detection of sheet metal to be cut via laser - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servo motors for X- and Y-axis movement - CNC control outputs/inputs for filter unit - Consumables starter kit - Plasma torch * - Ignition console * - Torch height control with ball screw spindles on double linear guides * Optional equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE-compliant safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi-spindle drilling head - Filter for 130A, 260A or 400A - Tube cutting unit Ø50 mm - Ø400 mm - Additional support for tube cutting unit - Warning lamp for errors and end of program With over 60 years of experience in research and production of sheet metal processing machines, and with 8,000 machines produced annually at three technologically advanced production facilities covering a total of 150,000 m², the Durmazlar Group and its DURMA machines are among the internationally renowned manufacturers in their sector, with products distributed in 120 countries. With our branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact from Durmazlar, offering you competent advice and support when it comes to sheet metal processing machines. Our demonstration center allows you to get an on-site overview of our machines, to be convinced first-hand of the quality and precise technology of our products, and to receive the best possible advice tailored to your company’s objectives. Our mission is to be your direct contact locally, providing you with services including training and customer support. We are happy to support you from Germany – from consultation and purchase to the entire lifetime of your machine. With our German subsidiary, we are always on site whenever you need us, able to react quickly and efficiently. We are your reliable partner for technologically advanced solutions in sheet metal processing. Itodpfjfiqgrox Al Njf

Stanje: novo, Leto izdelave: 2024, Everything can be configured upon request, with very short production and delivery times. We are happy to provide you with further information upon request. Technical specifications available on request. Standard Equipment: - Steel welded construction Ijdpfxjfirx Te Al Netf - DURMA CNC control unit (AURORA) - Remote diagnostic control (Ethernet) - Lantek Software W / automatic nesting - Laser-based positioning of the sheet to be cut - DURMA torch height control - Double-sided drive system (rack and pinion) - AC servomotors for X and Y axis movement - CNC control outputs/inputs for the filter unit - Consumables starter kit - Plasma torch* - Ignition console* - Torch height control with ball screw drives on double linear guides* Optional Equipment: - Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch - Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch - Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch - CE standard safety wire - Automatic gas console for Hypertherm - Manual gas console for Hypertherm - Oxy-fuel cutting torch - Plasma torch protection system - Manual plasma bevel cutting head - CNC bevel cutting head (+/- 45°) - Single drilling head - Multi drilling head - Filter for 130A, 260A or 400A - Pipe cutting unit Ø50 mm - Ø400 mm - Additional support for the pipe cutting unit - Warning lamp for fault and end of program With over 60 years of experience in research and production of sheet metal processing machines, producing 8,000 machines annually in three technologically advanced manufacturing facilities with a total area of 150,000 m², Durmazlar Group and its DURMA machines are now among the internationally recognized manufacturers in their sector, with products distributed in 120 countries. With our branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hessen region. Here, we are your direct contact from within the Durmazlar Group, providing expert advice and support on all matters related to sheet metal processing machinery. Our demonstration center gives you the opportunity to experience our machines firsthand, to be convinced of the quality and precise technology of our products, and to receive the best possible advice tailored to your business goals. Our mission is to be your direct local contact, providing comprehensive services including training and customer support. We are happy to support you from our base in Germany—through consultation, purchase, and throughout the entire lifecycle of your machine. Our German branch is always close by, ready to respond quickly and efficiently whenever you need us. We are your reliable partner for technologically advanced solutions in sheet metal processing.

Leto izdelave: 2024, stanje: novo, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power supply (Hypertherm XPR 170 XD Optimix): 170 A • Cutting capacity: ◦ Unalloyed steel, piercing, argon: 40 mm ◦ Unalloyed steel, piercing, air: 35 mm ◦ Unalloyed steel, straight cut: 60 mm ◦ Alloyed steel, piercing: 22 mm ◦ Alloyed steel, straight cut: 38 mm ◦ Aluminium, piercing: 25 mm ◦ Aluminium, straight cut: 38 mm Standard equipment: • Controller: Durma Aurora CNC controller Ijdpjdyfwkefx Al Netf • Truehole standard • Sheet measurement via laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick customization • Consumables kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: Remote maintenance Options included: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with perimeter safety wire • Oxy-fuel torch with sensor • Plasma torch breakaway system • Air dryer

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Labelling system for round and square canisters Iodpfxsu Ia E Ie Al Nstf Stainless steel frame 170 mm wide slat chain conveyor (optional wider available) Standard label width 140 mm or 190 mm, optionally up to 260 mm Label length 300 mm, optionally longer Dispensing speed up to 30 m/min, optionally 50 m/min Product diameter (subject to technical approval) from 20 mm to 170 mm, other sizes available on request Touch screen display with memory function Label applicator with three-dimensional adjustment Product separation with double-sided belts Product orientation for square bottles Top belt guidance for square and oval products Additional labelling options available such as top labelling, seal labelling, bottom labelling, etc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic powder coating booth – year of manufacture: 2000 Serial number: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 pieces with rotary system Operating mode: through-feed Workpiece entrance dimensions: 100 x 158 cm 2. IMEL washer, external dimensions: 3 x 12 x 4.2 m (L-shaped) – Washer entrance size: 72 x 144 cm – Water tank: 3 x 2.2 x 1.2 m – Capacity approx. 6000 liters (located beneath the washer) – Water heating via Sant Andrea burner, model KB 40 GM with power modulation in the range of 179–468 kW (gas burner) 3. WAGNER powder filtering system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 meters, with dedicated drive 5. WAGNER powder recovery unit with cyclone separator 6. Oven (double-circuit) with gas burner 163–390 kW One circuit for drying parts after washing; the other (longer) circuit for curing powder coating after spraying. Oven dimensions: 12 x 7 x 5.3 m, maximum workpiece size: 60 x 120 cm Isdjyrr Rqepfx Al Nstf Additionally, we have 2 oil burners with comparable capacity as an alternative to gas burners. The total installed area is approximately 30 x 11 m.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, 1,0 kos. Brezkontaktni preizkusni sistem z visoko zmogljivo infrardečo kamero NOXANT, lahko pregleda do 400 delov na minuto. Kamera Proizvajalec: NOXANT Tip: Noxcam640-IMD Leto izdelave: 2017 Tehnični podatkovni list na zahtevo. Isdpjwufpyjfx Al Notf Krmiljenje: Proizvajalec: IMDvista Leto izdelave: 2017 Celoten sistem je vgrajen v celici podjetja Beck – Švica.

Stanje: dober (rabljeno), Maximum width: 1300 mm Number of rollers: 5 Isdpfxsflvf As Al Netf Equipped with shears

Stanje: kot nova (razstavni stroj), Leto izdelave: 2018, obratovalne ure: 640 h, The configuration consists of: - ATOS Compact Scan (measuring head) Iedpfxjvpu U As Al Nstf - Image processing PC7810.S - Industrial stand - GOM Scan software - GOM Inspection software Condition: Like new. Hardly used.

Stanje: dober (rabljeno), Leto izdelave: 2016, skupna višina: 2.640 mm, skupna dolžina: 3.300 mm, skupna širina: 3.960 mm, volumenski pretok: 8 m³/h, Oprema: kabina, Tehnične podrobnosti: 75 m3 površine vključno z lakirno komoro, sušilno komoro in skladiščem za barve. Notranje mere lakirne komore: 3300 x 3960 x 2640 mm Tlorisna površina komore: 13,1 m2 Notranji volumen komore: 34,5 m3 Način ogrevanja: vnos zraka iz klimatiziranega prostora Dovod zraka: 8.000 m3/h Sušilna komora: Iedpfjyhbggjx Al Notf Notranje mere komore: 3300 x 3960 x 2640 mm Tlorisna površina komore: 13,1 m2 Notranji volumen komore: 34,5 m3 Način ogrevanja: električni grelni vložki, 22 kW 3x400V Dovod zraka: 2.500 m3/h Skladišče za barve: Notranje mere barvne kuhinje: 3100 x 2000 x 2600 mm Način ogrevanja: vnos zraka iz klimatiziranega prostora Tlorisna površina barvne kuhinje: 6,2 m2

Stanje: skoraj kot novo (rabljeno), Cognex In-Sight 9912 Sistem za obdelavo slike IS9912M-373-50 RedLine Proizvajalec: Cognex Corporation Serija: In-Sight 9900 Tip: industrijski sistem za obdelavo slik / vizijski senzor Model: IS9912M-373-50 Izvedba: monokromatski z osvetlitvijo RedLine Itedpfx Aljyr Abme Njf Regulatorni model: R00064 Tipna koda: 821-10210-1R Rev 03 Napajalna napetost: 24 V DC Največji vhodni tok: 1,5 A Izhod svetlobe: 24 V DC / maks. 0,75 A MAC naslov: 00D024686C60 Serijska številka: 1A1927PP304864 Država izdelave: Izdelano na Irskem Lokacija: Altenglan

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, S to ponudbo pridobite nov sistem za izdelavo brošur "Plockmatic BLM5035S". Predmet prodaje: 1 x Plockmatic BLM5035S za naslednje stroje: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Stanje: Gre za novo napravo v originalni embalaži. Pakiranje in dostava: Napravo si lahko ogledate v našem podjetju med delovnim časom. Prosimo, predhodno se naročite! Pakiranje, primerno za pomorski transport, in svetovna dostava sta mogoča na zahtevo! Itodpfx Alsyuubdo Njf Za dodatne informacije nas lahko tudi osebno kontaktirate.

Stanje: potreben popravila (rabljeno), Leto izdelave: 2014, Funkcionalnost: nefunkcionalno, skupna masa: 1.500 kg, za razstavitev Isdsxggc Nspfx Al Netf Stroj brez vztrajnikovega motorja in frekvenčnega pretvornika

Leto izdelave: 1999, stanje: rabljeno, Na voljo sta dve enoti. Oznaka stroja: Dozirni sistem za tekoče polimere Proizvajalec: Reiflock Itodpfx Asyvixbel Nof Tip: Reifomat 500 Leto izdelave: 1999 Kapaciteta: Pretok polimera: 0,12 - 2,5 l/min. Pretok vode: 40 - 160 l/min. Dimenzije: D 1000 x Š 750 x V 1500 mm Lastna teža: pribl. 120 kg Tehnična dokumentacija: da Stanje: Rabljeno Cena: Po dogovoru

Stanje: rabljeno, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging system Fan Type S 140 / 0 / S1 Serial No. Year of manufacture 12 / 2004 Nominal air flow: 1451 m³/h Negative pressure: 1398 Pa Filter area: 18 m² Extraction connection: Ø 140 mm, reduced to Ø 120 mm Air outlet: 480 x 480 mm Motor power: 1.1 kW Power supply: 400 volts, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - Mechanical filter cleaning via shaking motor - 2 discharge pipes at the bottom for waste collection bags, each Ø 500mm reduced to Ø 300mm - Dry fire extinguishing line with connection for C-hose, fire brigade connection for filter fire - Differential pressure switch for detecting filter contamination - Without control system (no control unit included) - Mounted on 4 steel tube legs (square tube 40x40 mm) Height as shown in photos: 3050 mm Required space (L x W): 1850 x 1000 mm Weight: approx. 400 kg Very good condition Ijdpfx Aor R Ewlel Njtf Ideal for wood dust, wood chips, plastic dust, or plastic chips.

Stanje: dober (rabljeno), Leto izdelave: 2023, Ta lakirna kabina se prodaja po naročilu stranke in jo je možno ogledati pod napetostjo. Ijdpfxsylm U Ro Al Njtf

Stanje: novo, Leto izdelave: 2025, PREMIUM Individual 1200mm - Model 2025 – The Marking Champion Among Laser Engravers! Metals – Plastics – and much more! • EZCAD 3 (true 64-bit card) supporting up to 4 axes • Compatible with Windows Professional 64-bit • Professional MOPA fiber laser source JPT with 20 watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color annealing) • 'DigiScan Eco 10' scanner unit for high precision and detail accuracy • T-slot base plate (optional threaded hole plate) for easy mounting and positioning of your workpiece • Large viewing window with certified glass -> door opening 2 x 600 mm • Scan area approx. 150 x 150 mm (optional 150/200/300 mm) • CNC-controlled Z-axis height adjustment with focus finder • Stand-alone Class 1 laser enclosure with manual door for safe, simple marking and integrated base for fume extraction unit • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel files, network or database! • Laser parameter matrix finder using 2 parameters (e.g. frequency to speed, frequency to power) • TCP/IP connectivity – commands can be sent to the software via TCP protocol, enabling easy integration with external components such as camera-based position detection • Industry 4.0-ready: the machine status can be monitored in real time via TCP/IP protocol • I/O ports for automation • New look and feel: modernized design for more intuitive, comfortable operation • 3D preview for rotary axis processing • Up to 50% performance boost thanks to 64-bit technology • Improved stability • Optional control of up to 4 axes WITHOUT switching via plug-ins • Optional deep engraving (slicer software controlling the Z-axis) • Faster hatch engraving thanks to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus adjustment • LED illumination in the marking area for optimal lighting, made in Germany • Connection for external extraction system • Start button and emergency stop on the housing • Software suitable for Windows 10 • USB cable for PC connection • Intel i3 or i5 with 8GB RAM and ultra-fast M.2 SSD • 23" TFT monitor for fatigue-free operation • German user manual and operation software Options available: → IPG or SPI fiber laser sources in various power ratings Iedpfxog H Tn Ie Al Nstf → Motorized and fully automatic Z-axis adjustment → Scanlab equipment → Suitable extraction units → Automation for component feeding, conveyor systems, and more! → 3D marking and engraving function → Automatic focusing using specialized laser sensor → Rotary units in various configurations → Motorized X and Y stages → Interlock system for marking without safety enclosure (using only PPE – personal protective equipment) for bulky parts Includes training at our Schweinfurt training center! Our engraving lasers are manufactured in our Schweinfurt facility! Therefore, individual customer requirements can always be realized! → Made in Schweinfurt! Images may contain optional equipment. We are your partner for laser engravers and marking systems – manual or fully automated. Please contact us for a tailored quote.

Stanje: novo, Leto izdelave: 2025, Markierheld EXCLUSIVE XL Industry 4.0 – Model 2025 Metals, plastics, and much more! • EZCAD 3 (true 64-bit card) with up to 4 axes • Suitable for Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20 watts power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color annealing marking) • DigiScan Eco 10 scanner unit for high accuracy and detail • T-slot plate by Isel for easy clamping and positioning of your workpiece • Front sliding door with large viewing window and certified laser safety glass made in Germany, including monitoring system -> Door opening: 450 mm • Left-side sliding door including monitoring for long parts -> Door opening: 400 mm • Clear control panel with Siemens pushbuttons • Marking area approx. 100 x 100 mm (optional 150/200/300 mm) • Motorized height adjustment with focus finder • Free-standing housing made of aluminum profiles with two manual doors for simple, user-friendly, and safe marking. Laser Class 1 • Base of the housing with Rittal control cabinet and integrated exhaust mounting area • LED work area lighting made in Germany • High-performance mini PC with 32 GB RAM • 21” TFT touch screen for fatigue-free operation • Professional marking software in German • Barcode and QR-code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder using matrix over two parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be sent to the software via the TCP protocol. This allows seamless integration of external components such as camera position recognition, etc. • Industry 4.0: Machine status can be processed anytime via TCP/IP protocol • Inputs and outputs for automation • 3D preview for rotary axis processing • Performance boost up to 50% thanks to 64-bit technology • Enhanced stability • Optionally control up to 4 axes WITHOUT switching via PLUG-ins • Optional DEEP engraving (slicer software for Z-axis control) • Increased engraving speed for hatchings due to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position check • Connection port for external extraction system • Software compatible with Windows 10 • USB cable for computer connection • Operating manual and user software in German Available options include: → IPG or SPI fiber laser sources with various power levels → Scanlab equipment → Suitable extraction systems → Automation for part loading, conveyor belts, and much more! → 3D marking functionality → Automatic focus adjustment via specialized laser sensor → Rotary unit in various designs → Motorized slides in X and Y axes → Interlock system for marking WITHOUT safety housing, using only personal protective equipment for bulky parts Training included in Schweinfurt! Our engraving lasers are manufactured at our facility in Schweinfurt! Custom requirements can be accommodated at any time! → Made in Schweinfurt Iodswga Etepfx Al Notf Photos may show optional features. We are your partner for laser markers—whether manual or automated laser marking systems. We would be happy to provide you with a quote.

Stanje: dober (rabljeno), KSB booster system M-CU 3/840/1 Delivery head 40 m, 8 m³/h Iedpfxed I Ixys Al Notf Cut-in pressure 5.0 bar Cut-out pressure 6.3 bar Max. operating pressure 11 bar 3 pumps, each 1.1 kW Dimensions (LxWxH): 180 x 55 x 125 cm All documentation available.