Sistem za dodelavo barve

Saima FL2

Stanje: novo, Step-by-step coating systems Elboy Industrial Solutions designs and manufactures a wide range of paint shops tailored to your product requirements. With ELBOY, you can use virtual reality during the design phase to navigate your facility, allowing you to make necessary adjustments right from the start, avoiding unexpected results later on. We offer engineering and manufacturing services for various applications, with special focus on environmental protection and occupational safety across all processes, including sandblasting, filling, washing, priming, and topcoating for all product sizes. The 'Step by Step' systems are equipped with overhead conveyors or floor conveyors, and can be configured for any product size. Cabins for sandblasting, chemical washing, pre-coating, drying, filling, top coating, and curing can be seamlessly integrated into the system. Duedjdy Dw Ajpfx Af Ssr To execute each process step-by-step as specified by the system, automatic doors open once the programmed cycle is complete, and the product proceeds automatically to the next process line. These fully automated systems are operated via a 15-inch touchscreen and offer comprehensive reporting options—including main computer monitoring, product reporting, results feedback as required, and remote control capabilities. Our paint shops are designed and built by our engineers to meet your capacity, application, and specific operational requirements. Whether you require electrostatic powder coating, wet painting, sandblasting, coating, washing, or similar systems, our solutions deliver maximum efficiency with minimal personnel requirements and the smallest possible footprint.

Stanje: zelo dobro (rabljeno), ZEISS Type: DSM 962 The digitized scanning electron microscope DSM 962 is equipped with an integrated 4 MB image memory, a 40 MB hard drive for internal image storage, as well as drives for external data and image transfer. This allows users to quickly and easily obtain detailed information about the composition and morphology of specimen surfaces down to the sub-micrometer range. With a magnification range of 5x to 300,000x, both macrostructure and microstructure analysis are possible. The application range can be significantly extended with special accessories, enabling, for example, analytical investigations in microscopic surface areas. The device can be operated either via conventional control elements or a keyboard and mouse (optional). Electron optics and vacuum control use conventional operation. Image memory functions are controlled via the keyboard or mouse (optional). Centrally positioned on the control panel is a separate info screen for menu display. This manual is intended as a guide to help users achieve the best possible results with the device. The explanations have been kept as simple as possible to provide all users, including those with limited experience, with necessary guidance. Magnification range: 20x to 300,000x at 7 mm working distance Steps in a sequence of 1-2-3-5-10 Minimum magnification: 5x at 50 mm working distance Resolution: 4 nm - guaranteed with tungsten cathode at 30 kV, 6 mm working distance, un-tilted sample 25 nm - guaranteed with tungsten cathode at 1 kV, 6 mm working distance, un-tilted sample 3.5 nm - guaranteed with optimal LaB6 cathode at 30 kV, 6 mm working distance, un-tilted sample Scope of delivery: (DSM 962 with accessories as shown) Condition: used (Specifications and technical details subject to change and error!) Please inquire about transport options before purchase. Dsdpfx Afjfcwwne Ssur For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, obratovalne ure: 100 h, Specializirani smo za obnovo puhal, kompresorjev in vakuumskih črpalk. Servisiramo opremo proizvajalcev kot so: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, Tuthill. Nudimo tudi najem puhal in kompresorjev. Delujemo po vsej Evropi in zunaj nje. Dodpfx Aon Tntqjf Sour

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 854 h, skupna širina: 2.450 mm, skupna višina: 1.100 mm, skupna dolžina: 1.900 mm, Lastna teža: 800 kg Cena: na zahtevo - Leto izdelave: 2017 - Dokumentacija na voljo: Ne - Prisotna CE-oznaka: Da - Prisoten CE-certifikat: Ne - Serijska številka: 5037411-000150 - Obratovalne ure: 854 - Transportne mere: 1900mm x 2450mm x 1100mm (d x š x v) Dedpfexan Utex Af Sour - Transportna teža [kg]: 800 kg - Transportni paketi [kos]: 2 Finančne informacije DDV: Navedena cena je brez DDV DDV/obračunavanje razlike v ceni: DDV je odbiten za podjetja Dostava in odkup so možni kadarkoli za vse stroje iz industrijske panoge Yorick Diebels

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. Dedpfx Aefz U S Esf Sour - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, ULMIA 1710s Table Saw Year of manufacture: 1982 Tilting angle: 45° Cutting length on sliding table: 750 mm Max. blade diameter: 250 mm Max. cutting height: 75 mm Cutting width between saw blade and fence: 650 mm Sliding table with angle cutting scale Dusdpfx Afsufgnze Sjr Table size: 1000 x 630 mm

Stanje: novo, Airplan — Kit di essiccazione modulare per legno e pallet Descrizione breve Airplan è la soluzione più semplice ed economica per essiccare legno, in particolare legno tenero. Si tratta di un kit pronto all’installazione, progettato per essere montato all’interno di una struttura realizzata dall’utente (secondo il disegno che forniamo), fino a 25 metri cubi. Con Airplan riduci al minimo l’investimento pur ottenendo un’essiccazione precisa e professionale per tavolame o pallet. Descrizione prodotto Airplan è un kit completo di essiccazione che include tutto il necessario per trasformare un semplice ricovero in una camera di essiccazione professionale per il legno. Forniamo il disegno costruttivo, tu realizzi la struttura, installi il nostro kit — e sei pronto per essiccare. Componenti principali - 3 ventilatori assiali industriali per la circolazione controllata dell’aria - Kit di resistenze elettriche per riscaldamento affidabile - 2 serrande automatiche per ottimizzare il ricambio d’aria e la regolazione dell’umidità - Quadro elettrico di comando con interfaccia software per l’essiccazione e tutte le connessioni di potenza/controllo Duodpfx Aexnbctsf Ser - Tubo e ugelli per vaporizzazione acqua Vantaggi principali - Investimento minimo: compri solo l’essenziale, non un’intera cella prefabbricata - Costi di trasporto ridotti grazie al formato compatto del kit - Installazione rapida, semplice e utilizzo intuitivo - Componentistica professionale e materiali di alta qualità per una lunga durata nel tempo - Controllo preciso dell’essiccazione, ideale per segati e produzione di pallet Applicazioni - Segherie di piccole e medie dimensioni - Produttori di pallet - Essiccazione in loco dove una cella completa non è economicamente vantaggiosa - Impianti pilota in fase di test prima della realizzazione di sistemi più grandi Cosa offriamo Kit Airplan completo (componenti sopra elencate) Disegno costruttivo e linee guida per l’installazione Assistenza base all’avviamento e istruzioni per la messa in funzione Prossimi passi / Contatti Per un preventivo, dettagli tecnici (requisiti elettrici, potenze) e il disegno costruttivo, contattaci indicando la capacità di essiccazione desiderata e le dimensioni della struttura prevista. Adatteremo la configurazione alle tue esigenze e ti forniremo un’offerta dettagliata.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: kabina, Spray / Painting Booth !! Always a brand-new machine (Photos shown are from installations at customer sites). We are the manufacturer. !! The Reinox 450×235 spray booth is the ideal solution for painting large components and for serial production. Thanks to its robust construction, high-performance extraction system, and ATEX certification, safe operation is ensured even in environments with explosion hazards. The booth is equipped with a powerful fan featuring a frequency inverter, allowing smooth adjustment of the extraction rate according to current needs. A three-stage filtration system keeps the workspace clean and ensures a high-quality surface finish. Duodpsia Taxjfx Af Ssr Technical specifications: - Fan certified for ATEX zone 22 - Extraction area: 4,500 × 1,900 mm - Overall dimensions: approx. 4,600 × 2,350 × 1,910 mm - Fan: 4 kW (ATEX version) - Extraction capacity: approx. 20,000 m³/h - Power supply: 400 V, three-phase - Control: frequency inverter – stepless performance regulation via potentiometer on the control panel. - Filtration: three-stage (dry or water-based version according to requirements) - Certification: CE, ATEX Warranty: 12 months It is possible to order machines in various individual configurations and sizes! Do not hesitate to contact us.

Leto izdelave: 1963, stanje: pripravljen za uporabo (rabljen), Load capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly serviced and inspected. Duedpfx Afjh I Edvj Ssr

Stanje: novo, The Jantar is, due to its dynamics and efficiency, the most popular model among Eckert machines. It is used by both large industrial companies and medium-sized enterprises seeking an economical yet reliable solution. The Jantar plasma cutting system can be equipped with both plasma and oxy-fuel cutting systems and can be fitted with extensive accessories (marking, drilling, and processing of pipes and profiles). The machine’s design has been optimized over the years for maximum reliability, which hundreds of customers across Europe can confirm. Main Features • Attractive price for a well-equipped base version • Highly dynamic and precise cutting of 2D applications, pipes and profiles • Cutting capacity from 0.5 mm up to 100 mm material thickness • Comprehensive database of predefined cutting parameters • Optionally expandable work area length Technical Data Drive: Servo AC Available working widths: 1,500, 2,000, 2,500, 3,000 mm Available working length: Any length starting from 1,500 mm Positioning speed: 25,000 mm/min Cutting thickness: up to 100 mm Cutting quality: DIN-EN ISO 9013 Positioning accuracy: DIN-EN 28206 Repeatability: DIN-EN 28206 Electrical systems: DIN-EN 81346 Safety module: DIN-EN 13850 Dujdpfef Alb Aox Af Ser Working height: 740-760 mm Operating temperature: +5°C to 45°C Working humidity: max. 90%