Trens Center Stružnica nakup rabljenega (14.973)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Bwodpfxovrcqds Afren Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch Bsdpfx Aovrckqsfrewn >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 Bedpjv Tyzcefx Afrswn >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm Bjdpfx Asvv Etvjfrown >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: Bwsdpsvrdlcsfx Afron >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Bwjdpfx Afjwrm Dtjrsn Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system Bwodewthbiepfx Afron About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Center height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Tailstock quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Bwodpfx Aswag Stefren Accessories and Equipment: >> 3-axis position display >> 1 piece 3-jaw chuck with 1 set of jaws >> Toolholder with 3 pockets >> Chip guard >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150150900039, širina na sredini: 1.500 mm, skupna masa: 2.820 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Bjdpfew Hwurex Afrown Center distance: 1,500 mm MACHINE DETAILS Weight: 2,820 kg EQUIPMENT various lathe chucks

Stanje: pripravljen za uporabo (rabljen), Swing diameter over bed 570 mm Distance between centers 1800 mm Turning length 1500 mm Center height 280 mm Swing over cross slide 365 mm Bwsdofmd Dhjpfx Afrjn Spindle bore 62 mm Spindle speeds 11.2–2240 rpm MARCELS MASCHINEN CH

Stanje: dober (rabljeno), Leto izdelave: 2010, Conventional lathe, center height 254 mm, center distance 1000 mm, spindle bore Ø 80 mm, 12 speeds 30 - 2200 rpm, motor 5.5 kW, Camlock 6'', dimensions 230x115x165 cm, weight approx. 1750 kg; Equipment: 2-axis digital readout, coolant system, 3-jaw chuck Ø 250 mm, rotating live center, MULTIFIX C quick-change tool post with various holders, fixed and travelling steady rest, Bodpfx Afetv Iy Eerewn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 120 mm, premer tulec: 75 mm, skupna dolžina: 1.000 mm, skupna širina: 850 mm, skupna višina: 1.900 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, nosilec vretena: MK 3, zmogljivost vrtanja: 32 mm, nazivna moč: 0,75 kW (1,02 KM), dolžina mize: 730 mm, širina mize: 210 mm, globina grla: 270 mm, Vrtalno-rezilni stroj z digitalnim prikazom na 3 oseh, zmogljivost vrtanja Ø 32 mm, motor 0,75 kW, levi/desni tek, velikost mize 730x210 mm, hitrost vretena 50–2500 vrt/min. Menjalnik, vreteno MK-3, naprava za vrezovanje navojev, fina nastavitev podajanja, delovna svetilka, hladilni sistem, držalo za vpenjalne tule ER 32, vrtalna glava, mere 1000x850x1900 mm, teža ca. 400 kg. Bodpsx Ebi Isfx Afrswn

Stanje: rabljeno, Leto izdelave: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Turning length: 650 mm Maximum swing diameter over bed cover: 200 mm Centre distance: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Bwsdpfedmbrxex Afrsn Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirement approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with thread cutting, tailstock quill taper Morse 4, maximum quill stroke 200 mm, tailstock travel 550 mm Control cabinet 80 x 40 x 230 cm Weight: 150 kg Motor control cabinet with Siemens 810T, dimensions W/D/H 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws Drilling machine, drill bits

Stanje: rabljeno, Leto izdelave: 1951, številka stroja/vozila: 6886, Swing diameter over bed: 500 mm Swing diameter over cross slide: 300 mm Swing diameter in gap: 760 mm Turning length: 1100 mm Centre height: 250 mm Feed rates - cross: 0.023 - 0.32 mm/rev Bwjdpfx Afocxxq Usron Feed rates - longitudinal: 0.07 - 1.0 mm/rev Leadscrew pitch: 4 / 12 settings Spindle bore: 65 mm Spindle speed: 13 - 600 rpm Thread cutting - metric pitch: 0.5 - 84 mm Thread cutting - imperial: 0.375 - 14 TPI Tailstock quill travel: 200 mm Total power requirement: 3 kW Machine weight approx.: 2.7 t Space requirements approx.: 2.8 x 1.2 x 1.25 m with longitudinal and cross feed, 3-jaw chuck Ø 380 mm; swing diameter over bed without bridge 760 mm;

Stanje: rabljeno, številka stroja/vozila: 33548, Swing diameter over bed: 533 mm Swing diameter over carriage: 340 mm Turning length: 2000 mm Centre height: 270 mm Swing diameter in gap: 720 mm Spindle bore: 80 mm Number of spindle speeds: 12 Speed range: 25 - 1500 rpm Feeds: 76 Cross slide travel: 110 mm Quill travel: 360 mm Spindle taper: MT 4 Bed width: 370 mm Bjdpfx Afocxxucsrown Approx. machine weight: 2.87 t Approx. required space: 4.1 x 0.95 m

Stanje: rabljeno, Leto izdelave: 1972, Swing diameter over bed: 980 mm Swing diameter over support: 600 mm Turning length: 2200 mm Swing diameter in gap: 1200 mm Gap length: 450 mm Number of spindle speeds: 24 Spindle speed range: 8 – 800 rpm Spindle bore: 150 mm X-axis travel: x = 2000, x² = 350 mm Y-axis travel: 500 mm Number of thread pitches: 398 Thread pitch (metric): 0.5 – 224 mm Thread pitch (modular): 0.25 – 112 mod. Thread pitch (TPI): 56 – 1/8 TPI Thread pitch (DP): 112 – 1/4 D.P. Number of feeds: 108 Longitudinal feed: 0.032 – 15.2 mm/rev Cross feed: 0.016 – 7.6 mm/min Tailstock quill: MT6 Quill stroke: 380 mm Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 HP Machine weight approx.: 7.9 t Bwjdpecxxqlofx Afron Space requirement approx.: 4.4 x 1.8 x 1.7 m Precision gap bed and lead screw lathe PBR type TM 450/2000 equipped with: - 500 mm original Forkardt 3-jaw chuck - Hardened and ground bedways - Rapid traverse for longitudinal and cross feeds - Spindle brake - Feeds: Longitudinal: 0.03 – 15.2 mm/rev in 68 steps Cross: 0.016 – 7.6 mm/rev in 68 steps Longitudinal: 0.0011 – 0.54 "/rev in 68 steps Cross: 0.00055 – 0.27 "/rev in 68 steps - Thread cutting: Metric: 0.5 – 224 mm in 58 steps Modular: 0.25 – 112 mod. in 58 steps Imperial: 56 – 1/8 TPI in 68 steps DP: 112 – 1/4 D.P. in 68 steps - Original Sauter hydraulics system with powerful external oil supply - Original Ideal tool holder - Faceplate with 4 independent jaws - Coolant system - Magnetic clutch - Automatic longitudinal stops - Cross stop - Thread dial indicator - Reducing sleeve - 2 fixed centers - Fixed steady rest - Swiveling original Staudacher spindle guard with safety switch - 2x emergency stop - Main switch - Chip collector - Workpiece lighting - Complete electrical system integrated in a machine-mounted control cabinet.

Stanje: rabljeno, številka stroja/vozila: 3045, Swing over bed: 870 mm Swing over cross slide: 520 mm Turning length: 2,100 mm Swing in gap: 1,080 mm Gap length: 430 mm Number of spindle speeds: 24 Speed range: 8 – 1,000 rpm Spindle bore: 103 mm X-axis travel: x = 1,830 mm, x² = 160 mm Y-axis travel: 415 mm Longitudinal feeds: 104 Feed range: 0.1 – 61.6 mm/rev Feed (inch): 0.0038 – 2 19/64 in/rev Cross feeds: 104 Cross slide feeds: 0.3 – 18.4 mm/rev Cross feed (inch): 0.0012 – 47/64 in/rev Thread pitches – quantity: 72 Threads – metric pitch: 0.5 – 240 mm Threads – inch: 60 – 1/8 in Threads – module: 0.125 – 60 mm Cross slide travel: 450 mm Top slide travel: 160 mm Rapid traverse longitudinal: 5,140 mm/min Rapid traverse cross: 2,570 mm/min Tailstock quill offset from center: 10 mm Quill taper: Morse 6 Quill travel: 280 mm Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current – fuse: 50 A Rated current: 30 A Total power requirement: 13 kW Machine weight approx.: 4.8 t Space requirement approx.: 4.1 x 1.5 x 1.9 m Bodpfxecxxmis Afrown Matra MD40 lead and feed screw lathe, equipped with: - Original Forkardt F400 3-jaw chuck, - Removable gap bridge, - Original MiniWizard 2-axis digital readout with summed x & x² values, - 3 glass scales, - Multifix quick-change toolpost, - Feeds: Axial: 0.24 – 32.87 mm/rev in 128 steps Radial: 0.07 – 9.86 mm/rev in 128 steps - Threads: Metric: 0.125 – 60 mm in 128 steps DP (inch): 128 – 15/16 ~DP in 128 steps Metric: 0.5 – 240 mm in 128 steps Inch: 32 – 15/64 ~1" in 128 steps - Pivoting spindle guard with safety switch, - 2x emergency stop safety switches, and - Lockable main switch.

Stanje: dober (rabljeno), Distance between centres: 800 mm Spindle bore: 38 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Bedpjukrtnsfx Afrswn Spindle speed: 24–2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision lead and feed screw lathe Model B30 LZS with accessory cabinet, 3-axis Fagor digital readout from UNI Technical data: >> Center height: 120 mm >> Distance between centers: 560 mm >> Spindle bore: 30 mm >> Max. swing diameter: 250 mm >> Longitudinal and cross feeds Bsdsxyh Ndspfx Afrewn >> Thread cutting: metric, module, inch >> Spindle speeds: 30–3000 rpm, stepless Accessories: 3-axis Fagor digital readout Tool cabinet containing: >> 3-jaw chuck >> 4-jaw chuck >> Tool post >> Drill chuck, live center >> Collet chuck with collets >> Fixed and steady rest >> Machine feet >> and much more About the machine: For sale is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Lorch runs quietly. Equipped with a Fagor 3-axis digital readout and a comprehensive range of accessories. The machine was previously used in a university setting. Take advantage of the opportunity to inspect this machine under power on site and convince yourself of its excellent condition.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short-taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds: 0.03 - 0.15 mm/rev >> Thread cutting: metric, imperial, module and diametral pitch threads possible >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg Bedpfx Aovivmyofrewn >> Dimensions (L x H x D): 1.2 m x 1.3 m x 0.65 m Accessories and Equipment: >> 1 piece 125 mm NEW 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck with collets from 3 to 26 mm in 1 mm increments, new About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages run smoothly and evenly. The bed guides are in very good condition. The Primus was installed in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows you to achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B with Lead and Feed Screw, 3-Axis Digital Readout by K&C, NEW, CE Compliant! Technical Specifications: >> Machine No.: 2442, Year of manufacture: 1997 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 (MT 3) >> Feeds from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Bwjdsxcuazspfx Afren Equipment and Features: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, coordinate choice ABS/INC, value halving, reference mark, tool programming (200 tools), taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 1 piece new 3-jaw chuck 160 mm, 2 sets of jaws >> 1 piece 4-jaw chuck 200 mm, 1 set of jaws >> New collet chuck and new collets from 3 to 25 mm in 1 mm increments >> Multifix size B quick-change tool post with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear cover >> Machine feet Safety features: electronic spindle guard, 2 emergency stop buttons, change gear box with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 – Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987, Machine No. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threads: Metric, Imperial, Module, and Diametral-Pitch possible >> Metric thread pitches: 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Dimensions: Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Features: Bjdpfxjwrmuxe Afrswn >> NEW 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Features: Switching between mm/inch, coordinate selection ABS/INC, display value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter function, quick zeroing, counting direction reversal >> 1 x 160 mm 3-jaw chuck NEW, 2 sets of jaws >> 1 x 160 mm 4-jaw chuck, 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Machine feet About the machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully operational and has been completely dismantled and newly repainted. A very robust and powerful machine. The new K&C 3-axis digital readout makes operation even easier and more accurate. The machine has been electrically and mechanically tested in our facility. A complete oil change was carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout from K&C – FROM TRAINING WORKSHOP! Technical Data: >> Machine No. 91-1814, Year 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, Size 5 with bayonet lock >> Tailstock: MT 3 Bwodpfx Afow Nw Dqorjn >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Dimensions (L x H x D): 1.83 m x 1.29 m x 0.88 m Equipment and Features: >> New 3-axis digital readout by K&C with 12-month manufacturer's warranty and manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter conversion, quick zeroing, counting direction switch, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> 1 pc. 4-jaw chuck 160 mm, 1 set of jaws >> NEW collet chuck and NEW collets from 2 to 24 mm in 1 mm increments >> Multifix size B with 2 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady rest >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear housing with limit switch, spindle brake About this Machine: Offered here is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new 3-axis digital readout by K&C makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test the machine under power at our facility.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: - Year of manufacture: approx. 1985, Machine no. 1191 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock taper: MK 2 - Feeds: 0.03 to 0.15 mm/rev - Thread cutting: Metric, Imperial, Module, and Diametral Pitch - Metric threads from 0.25 to 2.5 mm pitch - Weight approx. 360 kg Bwjdpfxovtp Edo Afrsn - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: - 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws - Collet chuck with 18 collets - Multifix size A quick-change toolpost with 3 holders - Stop - Electronic spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-quality surfaces. Take the opportunity to inspect the machine under power on-site and see its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Specifications: >> Year of manufacture: approx. 1985 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 >> Feeds: 0.03 to 0.15 mm/rev >> Threads possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 pcs. 160 mm 3-jaw chuck with 1 set of jaws Bwsdpfx Afou Aftgjron >> 1 pcs. new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet system with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A with 3 tool holders >> Stop >> Change gears About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was used in a training workshop. This new generation of Weiler lathes is very operator-friendly and can achieve ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.