Tematex (Italien) Tt.t64 nakup rabljenega (205)

Stanje: novo, Condition: New Delivery time: approx. 8 weeks from order Country of origin: Italy Price: €29,100 Leasing rate: €555.81 Max. diameter (steel pipe): 100 mm Length: 500 mm Width: 1,200 mm Height: 850 mm Weight: 480 kg Max. bending section modulus: 43 cm³ Standard steel pipe: 100 x 6 mm Gas pipe for pipelines: 3½" x 4 mm Furniture tubing: 100 x 6 mm Stainless steel AISI304-318: 100 x 3.6 mm Stainless steel AISI308 (food-grade): 100 x 3.6 mm Soft brass: 114.3 x 6.3 mm Hard copper and aluminium: 114.3 x 6.3 mm Soft copper: 114.4 x 6.3 mm Conduit pipe (TAZ): 88.9 x 3.65 mm Mepla, Gebereit and similar: 100 x 5 mm Round steel (S275JO): 70 mm Flat steel (S275JO): 100 x 25 mm upright, 100 x 5 mm Max. bending radius: 400 mm Hfjdpfx Asynmr Iolfeg Min. bending radius: 36 mm Min. pipe Ø: 10 mm Max. bending speed: 0 - 1.3 rpm Motor: 3.5 kW Tool quick-change system Digital bend indicator Programmable speed for each individual bend Spring-back compensation Precise positioning of the pressure die Footswitch 3 hexagonal tool holders (40, 50, and 80 mm) Left and right bending possible Operating manual Tools not included, prices on request

Stanje: novo, Condition: New Delivery time: approx. 12 – 14 weeks from order Country of origin: Italy Price: €32,900 Leasing rate: €628.39 Max. diameter (steel tube): 50 mm Length: 4000 mm Width: 950 mm Height: 1250 mm Weight: 430 kg Max. bending section modulus: 6 cm³ Standard steel tube: 50 x 3.31 mm Gas tube for pipelines: Ø 1”1/4 mm Stainless steel: Ø 50 x 2.5 mm Square tube: 40 x 40 x 4 mm Rectangular tube (horizontal): 25 x 50 x 6 mm Rectangular tube (vertical): 50 x 25 x 2.7 mm Max. outside diameter: 60 mm Max. bending radius: 200 mm Min. bending radius: 20 mm Max. bending angle: 210° Speed: 1.25 / 2.5 Motor: 3.5 kW Hydraulic tank capacity: 15 l With mandrel bending device, length 3 m Can be used with or without mandrel Programmable bending angle (C-axis) with intuitive NC control Manual longitudinal feed (Y1 axis) and tube rotation (B axis) with mechanical stops and digital readouts Two speed levels Independent adjustment of clamping and pressure dies Patented system for stabilizing the hydraulic pressure of the pressure die Quick-change tool system Pneumatic jaw clamping Operating manual ALTERNATIVE: Hedpfx Aljynmrnjfefg Model with 6 m mandrel bending device – price on request

Stanje: novo, Stanje novo Hfjdpfx Asynmq Djlfog Dobavni rok cca. 10 tednov od naročila Država izvora Italija Cena 10.370 € Leasing obrok 199,1 € Žagalni okvir z vrtljivim okvirjem Dimenzije tračnega lista 3120 mm Hitrost lista 35/70 m/min Kapaciteta reza 0° okroglo 280 mm Kapaciteta reza 0° kvadratno 240 mm Kapaciteta reza 0° ploščato 350x140 mm Kapaciteta reza 45° okroglo 230 mm, kvadratno 200 Kapaciteta reza 60° okroglo 150 mm, kvadratno 130 Kapaciteta reza -45° okroglo 200 mm, kvadratno 170 Delovna višina 830 mm Dolžina 1550 mm Širina 1400 mm Višina 1750 mm Teža 420 kg Ročna vpenjalka s hitro vpenjalno ročico Spuščanje s lastno težo z nastavljivim dušilnikom 2 hitrosti Naprava za dovajanje hladilne tekočine Digitalni prikaz za mitralne reze MOŽNOSTI: Transportni valji in tračni listi na povpraševanje

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov po naročilu Država izvora: Italija Cena: 11.070 € Leasing obrok: 212,54 € Žagin okvir: vrtljiv okvir Hjdpfx Alsynmqwofefg Mere tračne žage: 3270x27x0,9 mm Hitrost tračnega lista: 35/70 m/min Kapaciteta reza 0° okroglo: 280 mm Kapaciteta reza 0° kvadratno: 240 mm Kapaciteta reza 0° ploščato: 420x200 mm Kapaciteta reza 45° okroglo: 260 mm, kvadratno: 240 mm Kapaciteta reza 60° okroglo: 170 mm, kvadratno: 160 mm Kapaciteta reza -45° okroglo: 200 mm, kvadratno: 180 mm Delovna višina: 830 mm Dolžina: 1600 mm Širina: 1400 mm Višina: 1800 mm Teža: 438 kg Ročna vpenjalna glava s hitro zateznim ročajem Spuščanje z lastno težo z nastavljivim dušilcem 2 hitrosti Sistem za hlajenje MOŽNOSTI: Valjčne proge in tračne žage na zahtevo

Stanje: novo, Condition: new Delivery time: approx. 4 months from order Country of origin: Italy Price: €62,500 Lease rate: €1,181.25 Press force: 150 tons Stroke: 500 mm Ram: 800 x 400 mm Table: 900 x 600 mm Installation height: 500 mm Throat depth: 300 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Motor: 4 kW Length: 2,200 mm Width: 1,500 mm Height: 3,000 mm Weight: 5,500 kg 2-point round guide Table and ram with T-slots Two-hand operation Hedpfx Aloynmqkjfsfg Siemens PLC Pressure gauge Operating manual Optional equipment (prices on request): - 4-point round guide - Light barrier - Siemens control for programming stroke and pressing time - Siemens touchscreen control, stores up to 50 programs, for programming: • Upstroke and downstroke ratio • Dwell time at bottom dead center • Decompression time • Working pressure setting • Piece counter • Press stop in upstroke and downstroke • Setting for manual and automatic operation • Alarm and fault management - Hour meter - Piece counter - Decompression valve - Oil cooler with decompression valve - Pressure switch

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €75,000 Leasing rate: €1,417.5 Pressing force: 150 tons Stroke: 500 mm Table size: 2,500 x 2,050 mm Installation height: 800 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Hodpfsynmp Tjx Alfefg Length: 2,900 mm Width: 2,500 mm Height: 2,500 mm Weight: 5,200 kg Cylinder: fixed or horizontally movable Clear frame width: 2,050 mm Horizontally movable cylinder: 1,400 mm Hydraulically movable frame: 1,600 mm Horizontally movable cylinder Hydraulically movable frame Operation via manual lever as well as control panel Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: - Work table welded to the base frame, with holes on the surface - Control panel on a swing arm (pushbuttons for press movement, solenoid valves, Siemens CPU) - Wireless control unit (pushbuttons for press movement, solenoid valves, Siemens CPU) - Siemens control system with touchscreen - Lifting cylinders integrated in the table (6, 8 or 10 pcs.) - Anti-rotation device for the ram - 2 speeds for frame and cylinder movement - Oil cooler and decompression valve

Stanje: dober (rabljeno), Leto izdelave: 1990, 1x VROČA STISKALNICA ZA FURNIR “SORMEC” TIP 350X130 Hidravlična vroča stiskalnica za les, plošče, pohištvo, vrata, kompozite in različne materiale Tehnični podatki: Dimenzije plošče mm 3500 x 1300 1 UPORABNA DELOVNA PLOŠČA Ogrevanje plošče z vročo vodo Hsdpfx Alsyv Izbofofg Skupni pritisk 50 ton Odpiranje mm 300 8 valjev, premer 85 mm Kotliček za vodo ni vključen Skupne dimenzije mm 4500 x 1600 x 2500 h Teža približno 5000 kg Rabljeno, v dobrem stanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, 1 x AUTOMATISCHE DOPPELZAPFENFRÄSE SPANEVELLO Modell STDL mit 3 + 3 Spindeln TECHNISCHE DATEN: - ARBEITSBREITE: 170 – 3000 mm - WERKSTÜCKDICKE: 5 – 120 mm - OBERER ANDRUCKBALKEN MIT ANTRIEBSRIEMEN UND KUPPLUNG - UNTERE VORSCHUBKETTEN, BREITE: 70 mm - AUTOMATISCHE SCHMIERUNG DER MASCHINENBETTEN - AUTOMATISCHE SCHMIERUNG DER VORSCHUBKETTEN - MITNEHMERABSTAND: 340 mm - VARIABLE VORSCHUBGESCHWINDIGKEIT: 1,5 – 20 m/min Hfsdpfx Aeyurqpjlfsg - SPANNUNG: 380V / 3Ph / 50Hz AUSSTATTUNG DER MASCHINE: - LINKSSEITIGE EINLAUFFÜHRUNG, HORIZONTALE HANDVERSTELLUNG 1-2 SPRUNG-/SCORE-EINHEIT - MOTOR: 1,5 PS – 3000 U/min - WELLENDURCHMESSER: 35 x 55 mm L – max. Werkzeugdurchmesser 200 mm 3-4 ABTRAG-/FRÄSEINHEIT – 5 PS – 3000 U/min - WELLENDURCHMESSER: 40 x 55 mm – max. Werkzeugdurchmesser 250 mm - ABSAUGANSCHLUSS: Durchmesser 140 mm - SCHWENKBAR 0–90° - Vertikale/horizontale Handverstellung mit Digitalanzeige 5-6 FRÄSEINHEIT – 5 PS – 3000 U/min - SCHWENKBAR 0–90° - Vertikale/horizontale Handverstellung mit Digitalanzeige - WELLENDURCHMESSER: 40 x 95 mm – max. Werkzeugdurchmesser 250 mm - ABSAUGANSCHLUSS: Durchmesser 120 mm MASCHINE IN GUTEM BETRIEBSZUSTAND VOR AUSLIEFERUNG IN UNSERER WERKSTATT GEPRÜFT

Stanje: rabljeno, No. 3176 WEINIG Hydromat 1000 Planing and Moulding Machine Used, year of manufacture 2007 6 Spindles: bottom-right-left-top-top-bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Finished lamella width: 4 - 15 mm Max. number of lamellae: 16 pcs Lamella lengths: 400 - 4000 mm 1st spindle horizontal bottom: Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool circle 125 - 180 mm 2nd spindle vertical right: Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm 3rd spindle vertical left: 7.5 kW, 6000 rpm Diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top: 15 kW, 6000 rpm, diameter 45 mm Tool circle 112 - 250 mm Max. profile depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle: Hfsdpfx Aeu Agh Solfsg Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment reduced to 25 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm Divided pressure shoe before upper spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle: Brake motor 30 kW, 5000 rpm Axial adjustment reduced to 25 mm Diameter 45 mm Tool circle 112 - 250 mm Max. cutting depth 35 mm Axial adjustment 45 mm All profiling spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of feed rollers opposite left spindle, axial 35 mm Shortened roller distance opposite right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in table, lateral pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 driven, toothed rollers in outfeed table 2 driven, toothed rollers in machine table Pressure beam ahead of and discharge after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electric height adjustment of upper spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Subject to errors in description and price Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended The sale is made in "as is" condition Technical data, description of condition, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "sold as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Terms of payment: prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex site

Stanje: novo, Stanje novo Hfodpfx Alsxh Rulofog Dobavni rok približno 4 tedne od naročila Država izvora Italija Cena 20.960 € Leasing obrok 402,43 € Pritisk stiskalnice 40 t Hod 250 mm Max. zmogljivost upogibanja - konstrukcijsko jeklo 200 x 20 mm Miza 1100 x 620 mm Premer osi 55 mm Delovna hitrost 4,7 - 9,1 mm/s Povratna hitrost 45 mm/s Rezervoar za olje 45 l Motor 3 kW Delovna višina 950 mm Dolžina 1250 mm Širina 900 mm Višina 1000 mm Teža 750 kg 2 sprejemni osi, višina 110 mm (višje na zahtevo) Ročni omejevalnik 500 mm z milimetrsko lestvico Nastavljiva hitrost 2 ročna kolesa za nastavitev hoda in povratne točke Natančna hidravlična nastavitev hoda tudi pod pritiskom Dvo-ročno upravljanje Široka izbira orodij, cene na zahtevo ALTERNATIVA: Različica s CNC krmiljenjem

Stanje: zelo dobro (rabljeno), prva registracija: 01/2006, konfiguracija osi: 1 os, barva: drugo, dolžina tovornega prostora: 8.080 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.190 mm, Leto izdelave: 2006, Poids à vide : 2 340 kg Charge utile : 2 160 kg PTAC : 4 500 kg État technique : très bon État visuel : très bon Immatriculation : QJB185 = Informations sur l’entreprise = Pour toute question ou suggestion, n'hésitez pas à nous contacter. Nous garantissons une réponse sous 8 heures. Prix hors TVA. Aucun droit ne peut être tiré des informations fournies. Téléphone du bureau : MOB : Néerlandais - Anglais - Allemand - Français - Espagnol - Italien (Disponible sur WhatsApp et Viber). MOB : Néerlandais (Disponible sur WhatsApp et Viber). En cas de paiement par virement bancaire, l'argent doit être transféré sur notre compte bancaire ci-dessous. Vérifiez toujours les coordonnées bancaires indiquées sur notre site internet. Si vous avez reçu d'autres informations, veuillez nous contacter. En cas de doute, veuillez nous appeler afin que nous puissions vérifier la facture et/ou le paiement. Coordonnées bancaires : Hjdey Hcy Tepfx Alfefg Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN : NL 89 RABO EORI/TVA/FISCAL : NL857401B(01) BIC/SWIFT : RABONL2U

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Brandt KDF 430C stroj za lepljenje robnih trakov na voljo v zelo dobrem stanju! DEBELINA ROBNEGA TRAKU: 0,4–8 mm Hfodpsytb Smjfx Alfjg DEBELINA OBDELAVANCA: 8–60 mm z motoriziranim nastavljanjem višine POMIK: 11 m/min SKUPNA DOLŽINA: 4770 mm REZILO ZA ODLAGANJE RADIA S PNEVMATSKIM NASTAVLJANJEM REZILO ZA PLOŠČE PILING ENOTA

Stanje: novo, Maks. dolžina obdelovanca 4500, 6000 mm 3 rezkalne vretena Glavni motor 24 kW Hfodpjyrtyyefx Alfog Krmiljenje Siemens 840d Working Process Logos Life Evo XS 2345 ----- Popolnoma avtomatska CNC naprava za izdelavo oken z avtomatskim nalaganjem in razlaganjem. 2 portala s 3 rezkalnimi vreteni s 4- in 5-osno tehnologijo CNC-krmiljen manipulator za postavitev obdelovanca z 16 dvojnimi kleščami 8 popolnoma neodvisnih vpenjalnih naprav za največjo prilagodljivost in produktivnost 128 mest za orodje NOVO: Working Process zdaj proizvaja tudi enovretenske naprave z uveljavljeno tehnologijo za manjša podjetja! Ob strani najdete aktualne videoposnetke te serije.

Stanje: dober (rabljeno), Leto izdelave: 1995, Avtomatski stroj za izsekavanje utorov za križne spoje (za tehnične podatke glejte priložen prospekt). Rabljeni stroj v dobrem stanju, pred dostavo preizkušen v naši delavnici. Hfjdpfx Alsyr A Umsfog

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, številka stroja/vozila: 241.371, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.700 h, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 46 A, vhodna frekvenca: 50 Hz, največja višina reza: 80 mm, največja širina rezanja: 5.800 mm, premer žaginega lista: 350 mm, izvrtina žagine plošče: 30 mm, skupna dolžina: 7.300 mm, skupna širina: 7.600 mm, višina mize: 970 mm, leto zadnje generalne obnove: 2025, dolžina plošče: 7.300 mm, širina platforme: 5.800 mm, Oprema: CE označba, dokumentacija / priročnik, dozator, Electrical connected load: approx. 25 kW Voltage and frequency: 400 V / 50 Hz Mains system: TN system, with earthed neutral point Operating pressure: 6 bar overpressure Compressed air volume at operating pressure: approx. 143 l/min Compressed air volume at standard pressure (1 bar): approx. 1000 l/min Extraction connection – pressure beam – longitudinal saw: 2 x Ø 120 mm Extraction connection – chip duct – longitudinal saw: 1 x Ø 100 mm Extraction connection – angle fence – longitudinal saw: 1 x Ø 80 mm Required extraction velocity: 25 m/s Extraction volume: 3190 m³/h Required negative pressure at extraction ports: 2500 Pascal Nominal cutting length on saw machine 580: 5800 mm Maximum saw blade diameter (S): 350 mm Scoring unit saw blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Maximum clamp opening (K): 90 mm Maximum stack height (P): (including total of all shaft heights and total of all maximum board thickness tolerances) 80 mm Minimum board thickness or stack height (P): (when using a strip aligner) 6 mm Minimum aligning force of strip aligner: 400 N / unit Maximum aligning force of strip aligner: 2000 N / unit Working height longitudinal saw: 970 mm Overall height: 2070 mm Main saw motor power: 15 kW Saw unit forward feed speed: 5 to 120 m/min Hsdpfeytfxwjx Alfefg Saw unit return speed: 120 m/min Longitudinal saw return feed speed: up to 80 m/min

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 162.834 km, prva registracija: 06/2012, barva: drugo, vrsta prenosa: mehanski, emisijski razred: Euro 5, dolžina tovornega prostora: 5.570 mm, širina tovornega prostora: 2.200 mm, višina nakladalnega prostora: 2.210 mm, Leto izdelave: 2012, Grue Hauteur maximale : × VF644AGE0000198 = Informations supplémentaires = État technique : très bon État visuel : très bon Numéro d'immatriculation : 1DKH222 = Informations sur l'entreprise = Si vous avez des questions ou des suggestions, n'hésitez pas à nous contacter. Nous garantissons une réponse dans les 8 heures. Les prix s'entendent hors TVA. Aucun droit ne peut être tiré des informations communiquées. Téléphone du bureau : Mobile (Néerlandais - Anglais - Allemand - Français - Espagnol - Italien) Disponible sur WhatsApp et Viber. Mobile (Néerlandais) Disponible sur WhatsApp et Viber. En cas de paiement par virement bancaire, les fonds doivent être transférés sur le compte bancaire indiqué ci-dessous. Vérifiez toujours les coordonnées bancaires figurant sur notre site internet. En cas d'information différente, veuillez nous contacter. En cas de doute, veuillez nous appeler afin que nous puissions vérifier la facture et/ou le paiement. Coordonnées bancaires : Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN : NL 89 RABO Hsdpfx Alsyr R Emsfofg EORI/TVA : NL857401B(01) BIC/SWIFT : RABONL2U

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, "BARTESAGHI" mod. 2BE 250 REZKALNI STROJ z vodoravno vreteno. Navpično rezkanje navzdol (od zgoraj navzdol) Moč motorja rezkalnika 10 KM (7,5 kW) Zgornji pnevmatski cilinder za blokiranje obdelovancev Nastavljiva stranska vodila z možnostjo pozicioniranja za levo in desno stran, omogočajo obdelavo obeh strani obdelovanca Delovni cikel: Ročni dotok Blokiranje obdelovancev s pnevmatskimi cilindri Rezkanje z gibom vretena navzdol Odbokiranje obdelovancev. Tehnični podatki: Največja širina rezkanja: 250 mm Največja višina rezkanja: 150 mm Največja globina rezkanja: 60 mm Premer orodja min. 120 mm – max. 200 mm Premer rezkalnega vretena: 40 mm Moč motorja: 10 KM (7,5 kW), 4500 vrt/min Delovni tlak zraka: 8 bar Premer priključka za odsesavanje: 140 mm Orodja niso vključena Teža: pribl. 800 kg Transportne mere: 80 x 120 x 200 cm Hfodsyk Hi Sopfx Alfjg RABLJEN STROJ, V ZELO DOBREM STANJU POPOLNOMA OBNOVLJEN in NA NOVO LAKIRAN, TESTIRAN v naši delavnici pred dostavo

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Vaapro Taumelsieb vibracijsko sito, premer 1200 mm, 2 sita, vsi deli v stiku z izdelkom iz nerjavečega jekla V.A. 304, 2x čiščenje z žogicami, pnevmatska dvižna naprava. Hfedoyr Adzjpfx Alfjg

Stanje: rabljeno,

Stanje: novo, Leto izdelave: 2026, BITUMENEMULSIONSSPRITZE ABS-8000 Bitumenemulsionsspritze ABS 8000 – die optimale Ausrüstung für Großprojekte bei kürzester Einsatzzeit. Der autarke Dieselmotor ermöglicht den Aufbau auf jedem LKW-Fahrgestell. Hfedpfjvpt Dcjx Alfeg Die Bedienelemente sind auf einem separaten Bedienpult in der Fahrerkabine untergebracht, mit teilweiser Redundanz im Schaltschrank, was die Einstellung der Anlage sowie den Wechsel zwischen Transport- und Arbeitsstellung erleichtert. Hochwertige Bitumenpumpe und Absperrventile gewährleisten einen störungsfreien Betrieb. TECHNISCHE DATEN: - Flächenauftragsdichte: 100–1600 g/m² - Spritzbreite: 2,0–3,7 m - Reinigungssystem - Tankinhalt: 8.000 l - Selbstansaugfunktion des Tanks - Spritzbalkenreinigung durch Kompressor - Rückfahrkamera mit Monitor in der Fahrerkabine - Dosiersteuerung der Bitumenemulsion (g/m²) über Touch-Display in der Fahrerkabine - System zur Beheizung der Bitumenemulsion mit Dieselbrenner (Italien) - Spritzbalkensteuerung (Absenken und Ausfahren) per Fernbedienung in der Fahrerkabine und am Fahrzeug RÜCKRUFBITTE / KAUFANFRAGE Kaufen Sie BITUMENEMULSIONSSPRITZEN von TM TICAB – Ihre beste Entscheidung! Unser Preis bleibt heute und morgen wettbewerbsfähig. Technische Spezifikationen im Überblick: - Flächenauftragsdichte: 100–1600 g/m² - Spritzbreite: 2,0–3,7 m - Reinigungssystem - Tankinhalt: 8.000 l - Selbstansaugfunktion - Spritzbalkenreinigung durch Kompressor - Rückfahrkamera mit Monitor in der Fahrerkabine - Dosierte Steuerung der Emulsionsausbringmenge (g/m²) über Touch-Display in der Fahrerkabine - Bitumenemulsionsbeheizung durch Dieselbrenner (Italien) - Spritzbalkensteuerung (Absenken/Ausfahren) per Fernbedienung in Fahrerkabine und direkt am Gerät.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, CNC-BEARBEITUNGSLINIE FÜR TÜRFUTTER, bestehend aus: 1 HORIZONTALES BELADETRANSFER-SYSTEM, motorisiert, Mod. 0190 T.C Ladepuffer mit horizontalen Querförderbändern und motorisierten, drehzahlgeregelten Walzen. 1 Dichtungseinsetzvorrichtung in Nutfeder horizontal, bestehend aus: - 2 motorisierten Dichtungsrollenhaltern, - 1 Vorschubrolleinheit zum Einsetzen der Dichtung, - 1 Schneideinheit nahe dem Ende des Profils. 1 Schneid-/Bohrmaschine für Endbeschnitt, Modell 01TFRD SPECIAL, mit Bezug auf das obere Werkstück. Geeignet für das Schneiden, Bohren, Fräsen und Anubieren von Türzargen. AUFBAU DER MASCHINE: ARBEITSTISCH aus massiver Stahlkonstruktion, bestehend aus einer festen linken Seite und einer beweglichen rechten Seite. Elektronisch gesteuert über Positionssteuerung, mit insgesamt 6 Bearbeitungseinheiten: 2 auf der rechten Seite, 2 auf der linken Seite, 2 auf der oberen Traverse. 1 ZENTRALER, CNC-gesteuerter SHUTTLE für das Fräsen der Zargenenden. 1 HORIZONTALE RADIALSCHNEIDSTATION, 0–45°, Schnellverstellung per Wahlschalter, mit 2 Einheiten, je eine rechts und eine links. Je Seite ein Motor, mit zeitgesteuerter Eintrittslogik zur Vermeidung von Doppelschnitten. Motorleistung: 5 PS, 3000 U/min, mit Frequenzumrichter. Sägeblattaufnahme: 30 mm, Sägeblattdurchmesser: 370 mm, verstellbare Absaughauben und Schutzvorrichtungen. 1 HORIZONTALE BOHRSTATION, 0–45°, schnelle vertikale Schwenkung per Wahlschalter, mit 2 Gruppen, je eine rechts und eine links, 2 PS Motor, 3000 U/min, 7-fach-Bohrkopf mit 32 mm Bohrungsabstand. Spindeln einzeln anwählbar. Gruppen laufen auf Linearführungen für höhere Geschwindigkeit und Präzision, mit Längs- und Höhenverstellung. 1 OBERE VERTIKALE FRÄSSTATION auf Querbrücke, 1 Motor für Gegenplattennuten, Leistung 2 PS, 12.000–18.000 U/min, Bearbeitung in X/Y/Z gesteuert via CNC, auf Präzisionslinearführungen mit Kugelumlaufwagen, Werkzeugaufnahme mit Spannzangen. 1 HORIZONTALE ANUBA-BOHRSTATION, motorisierte Einheit, CNC-positioniert mit Hubeinheit zusammen mit der Frässtation, bestehend aus Bohraggregat, kundenspezifischer Anuba-Einsetzeinheit und individueller Anuba-Zuführung (Kapazität ca. 35 Stück, abhängig vom Anuba-Ø). 1 LINIENSTEUERRECHNER Importmöglichkeit für Bearbeitungsdaten (CSV oder ASCII) via MMC (Speicherkarte). Hinweis: Die importierten Bearbeitungsdaten werden für die Maschinenpositionierung und für die aufgelisteten Arbeitsschritte verwendet. Werkstück-Abmessungen: Mindestlänge: 580 mm (Innen45° Rahmen) Maximallänge: 3000 mm (Außen45° Rahmen) Mindestdicke: 30 mm Maximaldicke: 60 mm Mindestbreite: 75 mm Maximalbreite: 300 mm Hfedpfxeygcmfe Alfeg

Stanje: novo, Condition: New Delivery time: approx. 6-8 weeks from order Country of origin: Italy Price: €36,720 Leasing rate: €701.35 Saw frame: Double-column guide Saw blade dimensions: 3270 x 27 x 0.9 mm Infinitely variable band speed: 40 - 80 m/min Cutting capacity at 0° round: 300 mm Cutting capacity at 0° square: 300 mm Cutting capacity at 0° flat: 330 x 290 mm Cutting capacity at 45° round: 210 mm, square: 210 mm Cutting capacity at 60° round: 110 mm, square: 110 mm Working height: 840 mm Hydraulic motor: 0.75 kW Main motor: 1.5 kW Coolant pump motor: 0.06 kW Length: 3070 mm Hfodowiq Ttspfx Alfjg Width: 2060 mm Height: 1930 mm Transport dimensions: 2400 x 1700 x 1700 mm Weight: 1210 kg Double-column guided automatic band saw Vertical feed via ball bearing linear guides Feed length and quantity adjustable via CNC (up to 99 programs) Automatic cutting cycle with sensing pin Automatic material feed: 800 mm/stroke Adjustable cutting pressure and feed speed Infinitely variable blade speed Coolant system Chip brush Chip conveyor Hydraulic vices for clamping during cutting and on the feed carriage Operating manual in GERMAN or ENGLISH ALTERNATIVE: Version with 7" touchscreen control, additionally including: Automatic pre-selection of cutting parameters Blade deviation monitoring Adjustable vice pressure OPTIONS: Roller conveyors and saw blades available on request

Stanje: novo, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Italy Hfjdpfx Aswiqwxjlfog Price: €45,210 Leasing rate: €863.51 Saw frame: pivoting frame Blade dimensions: 3120 x 27 x 0.9 mm Infinitely variable blade speed: 20–100 m/min Cutting capacity at 0° round: 280 mm Cutting capacity at 0° square: 240 mm Cutting capacity at 0° flat: 310 x 240 mm Cutting capacity at 45° round: 230 mm, square: 230 mm Cutting capacity at 60° round: 140 mm, square: 140 mm Cutting capacity at -45° round: 200 mm, square: 170 mm Min. remnant length: 240 mm Working height: 835 mm Hydraulic motor: 0.37 kW Main motor: 1.5 kW Coolant pump motor: 0.12 kW Feed motor torque: 1.95 Nm Torque of motor for automatic saw frame rotation: 1.95 Nm Length: 2800 mm Width: 2000 mm Height: 1820 mm Weight: 1200 kg CNC control panel with 7" touchscreen for the following functions: Feed length, quantity, and automatic rotation of the saw frame for mitre settings Automatic feed: 1000 mm/stroke Variable cutting pressure Infinitely variable machine speed Coolant system Motor-driven chip brush Chip conveyor Automatic saw blade breakage monitoring Hydraulic clamping elements Recommended max. solid material diameter (automatic mode): 150 mm Operating instructions: German or English OPTIONS: Hydraulic bundle clamping device, micro-spray system, variable clamping pressure, 10" display, remote maintenance, roller conveyors, feed system, and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Italy Price: €17,770 Lease rate: €341.18 Saw Frame: Pivoting frame Saw Blade Dimensions: 3010x27x0.9 mm Blade speed: 35/70 (PLC) m/min Blade speed (infinitely variable): 20–100 (CNC/Touch) m/min Cutting capacity at 0° round: 260 mm Cutting capacity at 0° square: 240 mm Cutting capacity at 0° flat: 330x120 mm Cutting capacity at 45° round: 200 mm; square: 190 mm Cutting capacity at 60° round: 120 mm; square: 115 mm Min. remnant length: 220 mm Working height: 835 mm Hydraulic motor: 0.37 kW Coolant pump motor: 0.12 kW Length: 2,800 mm Width: 2,050 mm Height: 1,900 mm Weight: 1,090 kg VARIANT PLC: Material feed length is set via handwheel, counter and limit switch VARIANT CNC: Feed length and number of pieces set via CNC (99 programs) VARIANT TOUCH: Same as CNC, but with 7" touchscreen for easier operation Automatic cutting cycle: Clamping, saw blade & coolant on, cutting, saw blade & coolant off, rapid return stroke, unclamping Automatic material feed: PLC: 800 mm per stroke, CNC/Touch: 600 mm per stroke Variable cutting pressure Machine with 2 cutting speeds (PLC) or infinitely variable speed (CNC/Touch) Hjdpfxewiqpus Alfsfg Coolant system Automatic saw blade breakage monitoring Hydraulic vices Material chute Chip brush Recommended max. diameter for solid material in automatic mode: 150 mm Operating manual in GERMAN ALTERNATIVES: Model 330 AE CNC €20,490.00 Model 330 AE Touch €22,600.00 OPTIONS: Roller conveyors and saw blades on request

Stanje: novo, Condition: New Delivery time: approx. 4 months from order Country of origin: Italy Price: €66,700 Hodpfxowirpij Alfofg Leasing rate: €1,260.63 Pressing force: 150 t Stroke: 500 mm Table: 1,550 x 2,000 mm Mounting height: 800 mm Rapid traverse: 20 mm/s Working speed: 3 mm/s Length: 2,350 mm Width: 2,000 mm Height: 2,500 mm Weight: 4,100 kg Cylinder fixed or horizontally movable Clear gap between uprights: 1,550 mm Horizontally movable cylinder: 1,000 mm Hydraulically movable frame: 1,300 mm Horizontally movable cylinder Hydraulically movable frame Operation via hand lever and control panel Equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH OPTIONS: Worktable welded to base frame, with holes on the surface Control panel on swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Wireless remote control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8, or 10 units) Anti-rotation device for the ram 2 speeds for frame and cylinder movement Oil cooler and decompression valve