Tankbau Weilheim Gmbh Mešalni In Mešalni Kotel nakup rabljenega (130.820)

Stanje: novo, Leto izdelave: 2025, Features: - Overband neodymium magnetic separator - HP - Dust suppression - Belt speed control Djdpsw Elbdjfx Af Sjwa - Self-propelled drive for semi-trailer

Stanje: rabljeno, Naprodaj je odlično ohranjen mešalnik Nagema (40 l). V celoti izdelan iz nerjavečega jekla. Na novo nabrušene rezila. Dvostopenjska funkcija mešanja. Dwedpfx Afezn I Ebo Sja Dve hitrosti vrtenja rezil. Dve hitrosti mešanja za posodo. Prikaz temperature in hitrosti vrtenja posode. Pred nakupom je mogoče opraviti preizkus. Brez težav prenese tri varovalke z 25 A.

Stanje: dober (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, OPIS OBJEKTA: Lokacija: K.Park Passau – skladišče, Medienstraße 12. 94036 Passau Proizvajalec: Fritz Schäfer GmbH, Fritz-Schäfer-Straße 20, 57290 Neunkirchen-Salchendorf Prodajalec: Karl Bau GmbH, Industriestr. 5a, 94491 Hengersberg Leto izdelave: 1992/2004 Vrsta naprave: Dvostopenjska skladiščna konstrukcija/ konstrukcija iz jeklenih ploščadi Dimenzije: Jeklena konstrukcija ploščadi 1: 29,40 x 50,00 x 5,24 m Jeklena konstrukcija ploščadi 2: 45,00 x 45,00 x 5,24 m Število nadstropij: 2 (1. nadstropje + 2. nadstropje) Površina na nadstropje: Jeklena konstrukcija ploščadi 1: 1470,00 m² Jeklena konstrukcija ploščadi 2: 2025,00 m² Skupna površina: približno 6990,00 m² Dwodpfx Aezr E R Nsf Ssa Konstrukcijski material: Pocinkane jeklene nosilke z nameščenimi lesenimi ploščami Stopnišča: Pocinkane jeklene stranske stene stopnic s pocinkanimi stopnicami Dvigal: Tovorljivo dvigalo, nosilnost 500 kg TEHNIČNI PODATKI: Tlorisna površina: približno 3495,00 m² (1470,00 + 2025,00 m²) Nosilnost: 250 kg/m² Višina nadstropja: 2,60 m - pritličje 3,00 m - 1. nadstropje Skupna višina konstrukcije: 5,60 m

Stanje: skoraj kot novo (rabljeno), Ponujamo pocinkano tlačilno posodo – 5000 l. Proizvajalec: OKS Otto Klein GmbH Največji delovni tlak: 11 bar Leto proizvodnje: 2019. Dimenzije: Premer: 1400 mm Dwjdpfezr U U Dsx Af Sea Višina: 3570 mm Masa: 1050 kg Tlačilna posoda z dokumentacijo. Tlačilna posoda, vključno z armaturami – varnostni ventil, manometer + prirobnice. Tlačilna posoda, rezervoar za zrak, tlačna posoda.

Leto izdelave: 2011, stanje: nepreverjeno (rabljeno), Popolna naprava za pripravo plina in katalitično oksidacijo s sistemom za rekuperacijo toplote – leto izdelave 2011 V imenu našega naročnika ponujamo visoko kakovostno industrijsko napravo za pripravo plina in katalitično oksidacijo. Naprava je bila prvotno načrtovana in zgrajena za obdelavo plinovih tokov, ki vsebujejo metan, vodikov sulfid in ogljikovodike, iz geotermalne aplikacije. Trenutno je naprava v celoti nameščena in je mogoč ogled po dogovoru. Leta 2015 je bila naprava izključena iz obratovanja, pri čemer je bila nato strokovno zaustavljena. Vse komponente, ki so v stiku z mediji, so bile izpražnjene in očiščene. Od takrat naprava ni bila več v uporabi ali redno vzdrževana. Aktualna preizkusitev delovanja ni bila izvedena. Pred ponovno uvedbo v obratovanje je potrebna tehnična preveritev in po potrebi posodobitev posameznih komponent – zlasti sistema za nadzor in avtomatizacijo. Tehnični podatki Proizvajalec: KOPF Holding GmbH (celotna naprava) Model: Posebna naprava, prilagojena potrebam stranke Leto izdelave: 2011 Volumetrični pretok procesnega/izpušnega zraka: do 6.000 Nm³/h Stopnja pretvorbe metana glede na prvotno zasnovo: 90 % Moč gorilnika: 250 kW Izkoristek odpadne toplote: do približno 370 kW toplotne moči Dwjdozr T Dkopfx Af Ssa Obseg naprave Naprava za vakuumsko odplavljanje Absorber vodikovega sulfida Naprava za vakuumska stiskanja Priprava vode Naprava za katalitično oksidacijo Katalitični reaktor do 750 °C Dvostopenjska predfiltracija Glavni toplotni izmenjevalnik iz nerjavečega jekla Toplotni izmenjevalnik za izkoristek odpadne toplote Plinski gorilnik Glavni ventilator s frekvenčnim upravljanjem Merilna tehnika za pline Dräger Krmilnik Siemens S7 z vizualizacijo procesa Obsežna merilna, regulacijska in varnostna tehnika Dokumentacija Za napravo so na voljo obsežne originalne dokumentacije, vključno z: Opis procesa Sheme montaže Diagrami cevovodov in instrumentacije (P&ID) Izometrije Ponudbe in projektna dokumentacija Popolnost certifikatov za eksplozijsko zaščito in dokumentacije za tlačna posoda je trenutno še v preverjanju. Stanje Naprava je v celoti nameščena Leta 2015 izklopljena iz obratovanja v delujočem stanju Komponente, ki so v stiku z mediji, so izpražnjene in očiščene Od izklopa iz obratovanja ni več v uporabi Prodaja v trenutnem stanju Ogled možen po dogovoru Naprava je še posebej primerna za uporabo pri obdelavi plina, oksidaciji metana, čiščenju VOC/izpušnih plinov, v sistemih za biogas, plin iz odlagališč ali v podobnih industrijskih procesih. Prodaja poteka v imenu našega naročnika. Tehnični podatki so podani v najboljši možni meri na podlagi razpoložljive originalne dokumentacije. Aktualna preizkusitev delovanja ni bila izvedena. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Leto izdelave: 2018, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10044/0218, Podrobne fotografije in specifikacije izdelka najdete v datoteki PDF, ki je priložena. Stroji so posebej zasnovani za obdelavo zaročnih prstanoв in zapestnic. Ločitev obdelave notranjih in zunanjih površin na dva stroja zagotavlja visoko produktivnost. Vse potrebne operacije struženja (ravna obdelava, obdelava robov, stranska obdelava in faziranje) je mogoče izvajati zaporedno, brez potrebe po prilagoditvah ali predelavah strojev. Dodpfxey S Sz Ro Af Sjwa Tehnične specifikacije: TLI 10 Parameter Vrednost Pogon 0,55 kW z električno zavoro Napajanje 380 V / 50 Hz Regulacija hitrosti potenciometer Območje hitrosti 0–1400 vrt/min Dimenzije 100 × 70 × 130 cm Masa 170–190 kg

Stanje: dober (rabljeno), Žična spirala za vezivanje, zaprta spiralna žica na kolutih. 3 palete spiral, 12 popolnoma novih spiral + 12 načetih spiral. Dodpfeztn D Ujx Af Sjwa V razmiku 3:1 in 2:1. Prodaja samo v kompletu.

Stanje: zelo dobro (rabljeno), Dvigi za papirne skladove MZE Diplomat SHPA 175 × 130 Naprava je v brezhibnem stanju. Hidravlični pogon, najnovejša generacija hidravlične enote. Napajanje 400V. Dvig poteka preko upravljalne plošče, omogoča hitro delo. Dwjdpfjztn A Dsx Af Ssa Nosilnost 1500 kg. Mere palete/pol listov: 1750×1300 mm.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: Dwjdpfxewh Rp Eo Af Sea - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Djdow E H E Ropfx Af Sjwa Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: zelo dobro (rabljeno), Ugodna ponudba: jeklena valjarna, 50 KM, motor, hidravlično nastavljiva valjčna pot, samo 600 ur uporabe. Dsdpfx Aezpyggsf Sjwa

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Modul za doziranje etiket za integracijo tiskanja, tiskalni modul 4L300 za termični transferni tisk, transportni trak, glejte fotografije za opis. Dodpfxozn N Nne Af Sjwa

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 1.200 mm, merilno območje osi Y: 1.800 mm, merilno območje os Z: 1.000 mm, Zeiss CNC koordinatni merilni stroj Prismo Mass VAST GOLD Letnik izdelave: 2021 Dwsdpfxszr I R Ee Af Soa Zadnja kalibracija: 02/2025 Obseg meritev: X = 1200 mm, Y = 1800 mm, Z = 1000 mm Tehnično in vizualno v stanju, kot nov Stroj je bil nameščen v klimatiziranem prostoru za natančne meritve. Lastnosti in oprema stroja: Krmilnik C99 z nadzorno ploščo BP26_SE Avtomatska temperaturna kompenzacija Senzorski sistem VAST GOLD Avtomatski menjalnik tipalk, 9-pozicijski Referenčna tipalka Temperaturna tipalka Menjalnik tipalk, 7-pozicijski Kalibracijska kroglica Delovna postaja HP Z4 z monitorjem Programska oprema Calypso Basic 2022 Dodatne možnosti: modul za krivulje, pretvornik QDAS in sistem za poročanje PiWeb Na voljo je tudi dodatna oprema in možnosti. Na voljo v kratkem roku.

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 400-223, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 200 mm, hitrost pomika os X: 20.000 m/min, hitrost podajanja osi Y: 20.000 m/min, hitrost podajanja os Z: 20.000 m/min, montažni premer: 40 mm, dolžina mize: 2.500 mm, širina mize: 1.250 mm, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 30.000 obr/min, hitro pomikanje X-os: 20.000 m/min, hitri pomik os Y: 20.000 m/min, hitri pomik na osi Z: 20.000 m/min, premer orodja: 20 mm, število mest v zalogovniku orodij: 30, Ponujamo rabljeni portalni rezkalni stroj MB-Portatec GmbH basic II.S, letnik 2011. Proizvajalec: MB - PORTATEC GmbH Tip: basic II.S Serijska številka: 400-223 Leto izdelave: 2011 -Področje uporabe: Obdelava aluminijastih in plastičnih plošč do 2500 mm. Djdpfx Aoy U R Syjf Sjwa -Dodatna možnost: vertikalni vpenjalni sistem. -Pribor: vakuumska črpalka in odsesovalna naprava s predfiltrom. -MMS sistem -Programabilna vakuumska polja Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Semi-automatic Depaneling / Base Machine with Parallel Shuttle The dynamic depaneling machine LOW 4322 XL is specifically designed for medium to high product volumes and meets increasing demands in the production process. PCB panels of various material types are separated using low-dust and low-stress sawing and milling technologies, ensuring maximum product flexibility, precision, and throughput. Highly dynamic linear motor axes, tooling, and grippers satisfy the highest quality standards and guarantee long service life and reliability for the depaneling solution. Semi-automatic Depaneling – Solutions on Demand The LOW 4322 XL depaneling machine allows for rapid product changeover while maintaining short separation and handling times. Panelized PCBs are loaded via a parallel shuttle, clamped using pin clamping technology and, if necessary, in combination with vacuum suction cups. Dodpfx Afsvuw R Rs Sswa Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module configured as a parallel shuttle, separated left and right with sliding doors • Steel welded frame with two maintenance doors – left and right. ESD • Standard vision system base module for teach-in programming • Working area: 520 x 480 mm • Automatic milling cutter length processing • Remote maintenance/support via remote connection • Touch IPC with Windows 10 Pro operating system • Laser axis measurement including protocol • Air ionization • Milling cutter breakage monitoring (shaft milling cutters only) • Prepared for vacuum clamping technology • ESD powder coating, RAL 9002, including window and sliding doors An optional dust extraction unit can be offered retrospectively.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, skupna masa: 160 kg, skupna dolžina: 1.300 mm, skupna širina: 800 mm, skupna višina: 1.930 mm, vhodna napetost: 230 V, vhodna frekvenca: 50 Hz, valovna dolžina laserja: 10.600 nm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: CO₂ laser, Oprema: osvetlitev, The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. After prior setup, the software independently increments serial and article numbers. Furthermore, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a handheld scanner is also possible. A laptop including a mounting bracket with a Windows operating system is included as standard equipment. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Additional options, such as side-mounted supports for marking long components, are also available. 60 Watt CO2 laser (optional: 30 W) • Wavelength: 10,640 nm • Marking field size: 220 x 220 mm • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (including activated carbon filter) • Optional: Supports for large workpieces (also on both sides) • Marking software EZCAD in German / English • Pilot laser (simple preview, contour preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop including mounting bracket with Windows operating system • Frame made of aluminum profile • Air-cooled • Door width: approx. 720 mm / Door height: 400 mm • Connection: 230V Djdswkpyhopfx Af Sswa • Dimensions: approx. 1000 x 800 x 2000 mm (L x W x H) • Weight: approx. 160 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.550 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, The LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is a universally applicable, high-performance marking solution designed for industrial applications. It is suitable for precise and permanent marking of a wide range of materials including metals such as steel, aluminum, and hard metals, as well as plastics. The integration of a fiber laser ensures high marking quality while keeping maintenance requirements to a minimum. The system can be configured with fiber lasers in power classes of 20 W, 30 W, or 50 W, enabling optimal adaptation to different requirements concerning material type, marking depth, and cycle time. In many industrial sectors, the use of this technology is indispensable due to the durability and abrasion resistance of the markings. The included laser software allows the creation and positioning of content such as texts, numbering, 2D codes (e.g., DataMatrix), QR codes, and logos. Automatic serialization logic enables the generation of consecutive serial numbers without manual intervention. Additionally, the software supports importing and processing of external data sources (e.g., Excel spreadsheets) for variable contents like drawing numbers or project names. Integration of a hand scanner for data capture is optionally available. By default, the LAS 28 XLe is delivered with an integrated industrial PC (Windows-based) and fully installed laser software. Various options are available to expand its functionality, including a rotary axis (3-jaw chuck) for marking cylindrical components, side arms for processing long parts, a motorized Z-axis, and modular drawer systems for part feeding. Made in Germany Fiber laser: 30 W, 20 W, or 50 W • Laser class 1 • Wavelength: 1064 nm Dodpswkpx Rjfx Af Sjwa • Marking field size: 150 x 150 mm (optionally larger) • Signal tower for operating status display • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction system (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Side arms for large components (single or double-sided) • Optional: Programmable X, Y, and Z axes (software controlled) • EZCAD marking software (German/English) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard shelf • Aluminium profile frame • Air-cooled • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor holder: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 100 kg, skupna višina: 1.660 mm, Leto izdelave: 2025, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, Laser for Product Marking – The universally applicable laser marking system LAS 28 from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark nearly all materials such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser technology has become indispensable for durable marking. Dwedpfxowkpwao Af Ssa The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software increases serial and article numbers automatically after initial setup. Furthermore, the software can extract data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Standard equipment includes a laptop with a holder and Windows operating system. Optionally, the LAS 28 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, are also available. Made in Germany • Fiber laser 20W (optional: 30W, 50W) • Wavelength 1064nm • Marking field size 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – system for automatic focus distance determination • Signal tower for operating status display • Marking software EZCAD (optional additional laser software) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (work level adjustment) • Frame made of aluminum profile • 230V connection • Air cooled • Laptop with Windows operating system • Dimensions: 800 x 600 x 1660 mm (L x W x H) • Weight: approx. 80 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, The LAS 22 is a compact desktop unit with a small working area, ideal for marking small components. Thanks to its compact design, the system is extremely user-friendly and can be used virtually anywhere. The universally applicable LAS 22 laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20 or 30-watt fiber laser. In many industries, laser marking is essential for permanent markings. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without requiring extensive programming knowledge. The software can automatically increment serial and article numbers after initial configuration. Moreover, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a hand scanner is also possible. Standard equipment includes a laptop with Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Dwedpfsuy H Nqsx Af Soa - Fiber laser 30 watt (optional: 20 watt) - Laser class 1 - Wavelength: 1064 nm - Marking field size: 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview, contour preview) - Focus finder (simple focusing) - Max. workpiece height approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230 V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 600 mm, skupna širina: 400 mm, skupna višina: 690 mm, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, vrsta hlajenja: zrak, LASER - LAS 22 is a compact benchtop device with a small work area, making it ideally suited for small parts or, for example, nameplates and type tags. Its compact design makes the system highly practical and suitable for use virtually anywhere. Dsdpfx Afoxqhnzj Sswa The device is very easy to operate, with no programming knowledge required. With the powerful laser software, you can create text, numbers, 2D codes, QR codes, and logos in just a few clicks—no advanced programming skills necessary. Serial and article numbers are automatically incremented by the software after initial configuration. Additionally, the software can import variable data (such as drawing numbers, project names, etc.) from existing tables and automatically insert it into predefined fields. A handheld scanner can also be used. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 20 watt fiber laser (optional: 30 watt) - Laser class 1 - Wavelength: 1064nm - Marking field size: 110 x 110 mm - Marking software: EZCAD (German / English) - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height: approx. 95 mm - Grid holes for fixtures - Clamping area: 310 x 190 mm - Electrically adjustable Z-axis - Electric door with anti-pinch protection - Optional: exhaust system (incl. activated carbon filter) - Welded steel sheet construction - Connection: 230V - Air-cooled - Laptop with Windows OS (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs

Stanje: rabljeno, Leto izdelave: 2001, TEHNOLOŠKA LINIJA ZA IZDELAVO STREŠNIH ELEMENTOV 1. Profilirni stroj 2. Sistem za izdelavo izolacijskih elementov 3. Sistem za pripravo AL folije 4. Sistem za lepljenje 5. Pomožni elementi, tehnična dokumentacija, certifikati Tipi strešnih plošč, ki se proizvajajo na tehnološki liniji: - strešne plošče modulnih mer 1100mm x 1070mm Djdoyv E Aijpfx Af Sewa - strešne plošče polovičnega modula 550 x 1070 mm - strešne plošče brez protikondenznega sloja različnih dolžin (do 6 m)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1996, Zmogljivost: 1040 x 3,5 mm Dodpfx Ajzq Uvxjf Sewa - Zaščita svetlobne palice zadaj - Kombinirana zavora in sklopka Ortlinghaus - Naključni valjčni transporter oz. dvižna naprava za pločevino s plastičnimi valji - Centralno podmazovanje

Leto izdelave: 2008, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 346100, Machine SAR-1000-B-015, incl. dodatki: ekstrakcijska enota ULT ASD 300 Ex. Uporabniški priročnik je na voljo kot PDF. Stroj je trenutno v stanju, kot je prikazano na slikah. Po potrebi ga lahko za prevzem postavimo na palete. Dwsdpfxexwvruo Af Sja Stroj je pregledalo podjetje Schunk; ugotovljen je bil potreben naslednji rezervni material: - z-os - Ležaji osi Y1 + Y2 - Zamenjati napajalni kabel, kabel Hallsensorja in pnevmatske cevi - Zavora osi X - Priključek za odsesavanje + cev za odsesavanje - Senzor shuttle (B4.3/E) - Nosilci orodij (5 kos) - Zamenjati UPS - Krtača pritrdila - Žarnica za signalno luč - Tesnilni obroček pritrdila, pnevmatski cilinder, vodilna os + drsna puša, pritrdilna plošča vretena - Zunanji izpušni kanal ULT - Dvižni cilinder mize (?) - Po podatkih podjetja Schunk materialni stroški cca 16.000 € Ker stroj prodajamo kot okvarjen/potreben popravila in smo navedli vse znane napake, se blago prodaja z izključitvijo kakršne koli garancije in stvarne napake.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, lastna masa: 50 kg, vhodna frekvenca: 50 Hz, Naprava za strjevanje orodij: grelna moč: 9 kW, temperatura: 150 °C. Dwodpfozab A Eex Af Sja

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 900 mm, merilno območje osi Y: 1.500 mm, merilno območje os Z: 700 mm, Oprema: Na voljo je tipska ploščica, Zeiss CNC koordinatni merilni stroj Prismo 9/15/7 VAST GOLD Letnik: 2000 Modernizacija 2024, zadnja kalibracija DAkkS 12/2021 Merilno območje: X = 900 mm, Y = 1500 mm, Z = 700 mm Tehnično in vizualno v odličnem stanju. Lastnosti in oprema: Upravljalnik C99 s kontrolno ploščo BP26 Samodejna temperaturna kompenzacija Senzorski sistem VAST GOLD Menjalnik tipalk MSR 10-krat VAST Menjalnik tipalk (krožna plošča) 8x VAST Referenčna tipalka Temperaturna tipalka Dodatna oprema za tipalke Kalibracijska krogla Delovna postaja HP Z4 z operacijskim sistemom WIN11 in monitorjem Dwedpfozq U Rcox Af Sea Programska oprema Calypso Basic 2024 Dodatne možnosti: Curve in QS-Stat Možna nadgradnja Calypso in druge možnosti Na voljo dodatna oprema in možnosti Kratkoročno na voljo