Stop-Choc Vzmetni Elementi 4 Kosi nakup rabljenega (63.290)

Stanje: novo, Leto izdelave: 2024, obratovalne ure: 5 h, Funkcionalnost: popolnoma funkcionalen, Heli electric forklift, very robust, no unnecessary electronics Equipped with sideshift, lighting, indicators, rear-view mirror, overhead guard, trailer coupling, and power steering. Solid rubber tires at the front, pneumatic tires at the rear. Comes with charger. Length: 2,200 mm Width: 1,120 mm Rodpfjv A Rq Tsx Akreu Height: 2,130 mm Lift height: 3,000 mm Total weight: 2,935 kg

Stanje: pripravljen za uporabo (rabljen), Siemens SIMODRIVE 650 AC-HSA tranzistorski pulzni pretvornik 6SC6508-4AA01 - brez kartic, rabljen, v dobrem stanju, 100% delujoč, obseg dobave kot na slikah. POZOR: Stroške pakiranja in pošiljanja prosimo povprašajte posebej! Rodpfx Aksy Nr Uljrou

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish Redpfx Akjfdkb Tsrou - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard Rjdpfx Ajd Tbbdekrou - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. Rsdpfx Ajd Tqaljkreu According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) Rjdpfx Aksfdkb Uereu - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level. Rsdpfx Akoguk A Herou

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Rodpjfdkbhefx Akreu - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. Redpfoguk Dksx Akrsu The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Rsdpfoguk Dvjx Akrou - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, moč: 2 kW (2,72 KM), širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.000 mm, skupna masa: 1.300 kg, Tehnični podatki: Odprtina lijaka: dolžina x širina 1250x1000 mm Dolžina x širina: 1250 x 1000 mm Odprtina rezalne enote: 562 x 462 mm Dovodna odprtina: 1250 x 1000 mm Dolžina x širina: 562x462 mm Število gredi: 4 kosi od tega: rezalni gredi: 2 kosa čistilni gredi: 2 kosa Število rezalnih diskov: 23 Rjdpfjyma Tiex Akrju Število obratov gredi: 25 min⁻¹.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, številka stroja/vozila: NR: 220.10.029.19, Funkcionalnost: popolnoma funkcionalen, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 28 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, višina obdelovanca (maks.): 60 mm, Oprema: CE označba, dokumentacija / priročnik, Naprodaj visokokakovostni robni lepilni stroj Format4 Tempora 60.06 EL – takoj pripravljen za delo! Dvignite svojo proizvodnjo na višjo raven s tem malo rabljenim robnim lepilnim strojem Format4 Tempora 60.06 EL v odličnem stanju. Stroj je zasnovan za industrijsko uporabo in zagotavlja izjemno natančnost ter popolno površino vsake plošče. - Visokonatančno avtomatsko lepljenje robov - Enota za predrezkanje za popolno pripravo roba - Zanesljiv in konstanten sistem lepljenja - Popolna obdelava: porezovanje, rezkanje, poliranje - Enostavno upravljanje in zanesljivo delovanje Vključene dodatne opreme: - Rdeč zračni rezervoar (kot je prikazano na fotografijah) - Dodatni ogrevani posoda za lepilo – idealna za hitro menjavo različnih barv lepila Stroj je skrbno vzdrževan, zelo malo rabljen in popolnoma operativen – pripravljen za neposredno uporabo v proizvodnji. Redey Dg N Topfx Akrou Stroj je na voljo zaradi reorganizacije obrata. Za več podrobnosti ali ogled nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, nosilnost: 9.150 kg, nosilnost na odsek shranjevanja: 3.050 kg, skupna dolžina: 22.800 mm, skupna višina: 3.500 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 22.800 mm, 4 dvopolna paletna regala (M35112711-3) vsak 5,7 m dolg, 3,5 m visok, 1,1 m globok, vsak s 2 polji, širokimi 2,7 m, vsak s 3 nivoji prečk, nosilnost na polje 3000 kg. - 12 okvirjev (RM3511 - RAL5019) - 24 talnih plošč, podlag, pritrdilni material - 48 talnih sider (ZZBA1210) - 48 posameznih prečk (T2711 - RAL2008) Redsyz Iccspfx Akreu - 4 oznake nosilnosti (BSMcP) Okvirji so vijačeni, ne predmontirani Prevoz / dostava: - največ 20 delovnih dni po prejemu plačila - brezplačna dostava na gradbišče / mesto montaže - razklad tovornjaka izvaja kupec z lastno dvižno opremo - dobave po celotni Nemčiji, razen otokov! Dobave v EU države po individualnem dogovoru.

Stanje: dober (rabljeno), 4-postajni knjižnovezni stiskalnik za lepljenje blokov MURO 4 x 5000 A4/HAD Trdna konstrukcija, vodoodporna plošča in pocinkane komponente. Stroj je v brezhibnem stanju. Tehnične specifikacije: Format: 350x320x550 (Š/G/V) Število postaj: 4 Rodpoy Ehnajfx Akreu Napajanje: 230V Maksimalna poraba moči: 4kW Teža: 102kg Visoka vpenjalna sila, vztrajnika z udobnim oprijemom. Električno sušenje z dvema stopnjama moči: 2 in 4kW Vsak stiskalnik je mogoče nagniti do 45′ Konstrukcija je na kolesih za lažje premikanje.

Stanje: dober (rabljeno), GUK FA 49/4 zgibalni stroj + GUK FA 49/4 prečni zgibalni modul Stroj je v zelo dobrem tehničnem in vizualnem stanju. Format: 490x690 mm. Hitrost zgibanja: 30–160 m/min Oprema: 4 vzporedne kasete na glavni enoti 4 pravokotne kasete na prečni zgibalni enoti Prva kaseta podaljšana. Prilagoditve kasete so na številčnici. Gladko nastavljiva hitrost. Števec z možnostjo porcij in prikazom hitrosti zgibanja. Rietschle kompresor. Orodni valj z veliko število pripomočkov za perforacijo, biganje in rezanje. Povišani pokrovi za zvočno izolacijo. Podajanje s pomočjo vakuuma. Mobilni izhod (prosto stoječa izhodna enota) z gladkim upravljanjem hitrosti. Popolna dokumentacija. Redoy Ehk Iopfx Akrsu Obsežen nabor dodatne opreme.

Stanje: dober (rabljeno), Leto izdelave: 2005, skupna dolžina: 4.200 mm, skupna širina: 2.500 mm, skupna višina: 1.800 mm, višina izdelka (maks.): 4 mm, skupna masa: 7.000 kg, Shearing capacity 4 mm, cutting length 3050 mm, throat depth 350 mm, motor 18.5 kW, motorised backgauge, support arms with scale, cutting line illumination, foot pedal, pneumatic sheet holders, new IMEX PLC control, dimensions 420x250x180 cm, approx. 6500 kg Rodpfx Aotp I S Aokrsu

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EAN0729389556525, skupna dolžina: 34.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, število vrst polic: 4, višina okvirja: 3.500 mm, prostor za palete: 108 evropske palete, širina okvirja: 1.100 mm, višina police: 3.500 mm, dolžina police: 8.500 mm, dolžina opore: 2.700 mm, 4 rows of pallet racking (4 x M35112711-2) - Each 8.5 m long, 3.5 m high, 1.1 m deep - Each with 3 bays, 2.7 m wide - Each with 2 beam levels, compartment load capacity 3,000 kg Included: - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, fastening material - 64 floor anchors (ZZBA1210) - 48 single beams (T27114 - RAL2008) - 4 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: Rodpfjv Ukz Aox Akreu - Max. 20 working days after receipt of payment - Delivery free to site / installation location - Unloading from the truck is the purchaser’s responsibility using their own forklift equipment - Deliveries are made throughout Germany (mainland only, excluding islands) - Deliveries to EU countries by individual arrangement

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: EAN0729389556525, skupna dolžina: 71.000 mm, skupna višina: 4.000 mm, razmak između stupova: 2.700 mm, višina police: 4.000 mm, število vrst polic: 7, nosilnost: 6.000 kg, višina okvirja: 4.000 mm, obremenitev na par nosilcev (maks.): 3.000 kg, Paletni regalni sistem 4 m visok, na polje 2 prečkinski ravni (svetlina 2700) Obseg: 32 okvirjev 4 m visokih 128 talnih sider 18 zaščitnih kotov proti naletom 100 prečk dolžine 2,7 m, višina 0,11 m 150 mrežastih polic 89/110, nosilnost 1000 kg 7 tablic z nosilnostjo Dobava na gradbišče brezplačno Okviri privijačeni, ne predmontirani Rodsyyny Ejpfx Akrou Prevoz / Dobava: - največ 20 delovnih dni po prejemu plačila - dobava brezplačno na gradbišče / mesto montaže - raztovarjanje s tovornjaka opravi kupec z lastno dvižno napravo - Dobave se izvajajo po celotnem območju Zvezne republike Nemčije, razen otokov! Dobave v države EU po individualnem dogovoru.

Stanje: rabljeno, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), vhodna napetost: 400 V, vhodni tok: 40 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, Oprema: CE označba, dokumentacija / priročnik, Ponujamo to rabljeno obdelovalno središče FORMAT-4 PROFIT H200R 13.33 s prehodom, letnik 2022. Tip: PROFIT H200R 13.33 Serijska številka: 30B.05.067.22 Koda: 9417 Nazivna napetost: 400,0 V Število faz: 3P+N Frekvenca: 50/60 Hz Nazivni tok: 40,0 A Moč: 18,0 kW Leto izdelave: 2022 Krmilna napetost: 24 VDC Minimalno varovalo: 32 A Maksimalno varovalo: 50 A Minimalni zračni tlak: 8 bar Rodpfxjyvtq Uo Akrsu Poraba zraka: 350 Nl/min Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), nosilnost: 4.000 kg, Oprema: nožno daljinsko upravljanje, Heinrichsglück 4 tone nosilnosti, TOP stanje Varilna vrtljiva miza 4000 kg, kompletni set Nosilnost vodoravno 4000 kg, nosilnost v nagibu 4000 kg Stopenjsko nastavljiv nagib in hitrost vrtenja Redpfx Akjyuph Esrou Zelo robustna Hitrost brezstopenjsko nastavljiva od 0,05 do 1,5 obr./min, digitalni prikaz Premer vrtljive mize 1500 mm Višina vodoravno 1230 mm, nagnjena do sredine 1000 mm Dolžina 2,0 m x širina 1,6 m Ročni daljinski upravljalnik in nožni daljinski upravljalnik

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7221 TECHNICAL DATA - Minimum / maximum workpiece width: 45 / 150 mm - Minimum / maximum workpiece height: 15 / 50 mm 3 spindles: 1) Lower horizontal 11 kW 2) Upper horizontal 22 kW (7000 rpm) 3) Lower horizontal 5.5 kW Spindle diameter: 40 mm - Spindles 1 and 3 adjusted manually (up/down, left/right) - Spindle 2 adjusted manually (left/right) Redpfx Akjyy I Ayersu - Spindle 2 adjusted electrically (up/down) - Spindles 2 and 3 equipped with brakes Top: - 3 metal toothed feed rollers - 1 twin rubber outfeed roller Bottom: - Infeed pressure device - Ribbed worktable - Smooth metal feed roller - Electric thickness adjustment - Infinitely variable feed speed: 6–24 m/min - Feed motor: 3 kW - Feed system with Cardan shafts - Infeed table length: 1970 mm - Automatic table lubrication system - Extraction connection diameter: 1x150 mm, 2x140 mm - Dimensions (LxWxH): 3070x2000x1800 mm - Weight: 2000 kg ADVANTAGES - German manufacture - With 3 cutterheads - For processing lamellas - Ribbed worktable - Cutterheads included - Not repainted - Very good condition - Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Stanje: zelo dobro (rabljeno), Kataloška številka: 7649 TEHNIČNI PODATKI širina vhoda: 900 mm višina vhoda: 300 mm širina gredi: 1030 mm premer gredi: 700 mm dolžina noža: 1030 mm število nožev: 3 kos mere sita: 70x70 mm spodaj 2 zobati vpenjalni gredi motor spodnje gredi: 7,5 kW zgoraj 2 zobati vpenjalni gredi motor zgornje gredi: 7,5 kW trakasti podajalnik redler z verižnim trakom 5600 mm + 10600 mm: 2,2 kW širina podajalnega traku: 800 mm glavni motor: 90 kW vzvratni hod Rsdpfxex S Naws Akrju skupne mere stroja d/š/v: 3300x3100x1700 mm mere osnove za sekalnik: 3300x2080x1940 mm mere podajalnika / redlerja d/š/v: 5600x900x1000 mm + 10600x1050x1600 mm mere osnove za podajalni trak: 5100x1300x2520 mm skupna teža približno: 16.000 kg PREDNOSTI – nemška izdelava – verižni transporter tipa redler, opremljen s strgali – vzvratni hod – DTR dokumentacija – rabljen sekalnik, odlično ohranjen Neto cena: 219.900 PLN Neto cena: 52.350 EUR odvisno od tečaja 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih)

Stanje: rabljeno, Leto izdelave: 2001, DDS vlažilnik Hitropritrditvene tirnice Technotrans hlajenje in kroženje Brez obračanja Rjdpfxeyx A S Ho Akrju Števec izpisov: 42 milijonov.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Four-sided planer, 8 heads, HARBS Rodpfel Dw Nxex Akrsu Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head arrangement: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm.