Skoda W 200 T nakup rabljenega (93.952)

Stanje: rabljeno, obratovalne ure: 7.526 h, prevoženi kilometri: 69.033 km, moč: 55 kW (74,78 KM), prva registracija: 03/2016, skupna masa: 3.500 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x2, največja dovoljena obremenitev: 650 kg, lastna masa: 2.850 kg, medosna razdalja: 2.500 mm, zavore: drugo, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, število sedežev: 2, Oprema: kabina, klimatska naprava, parkirni senzorji, servovolan, sistem za imobilizacijo, German vehicle, original 69,038 km, 7,526 operating hours, Schmidt Swingo, multiple units available, condition as shown in photos, all-wheel steering, high-pressure cleaner with high-pressure lance for pre-cleaning and removal of stubborn dirt, 2 disc brushes at the front, 800 mm diameter, sweeping width: 2,800 mm, ideal for footpaths, cycle paths and narrow alleys, air conditioning, pre-spray system, debris hopper 1.8 m³, fresh water tank 190 liters, total volume 380 liters, hopper lid opening and tilting via remote control, diesel engine VM39D/2, 55 kW, 50 km/h road approval, driver's cab with air-suspended comfort seat, reversing camera, 2 seats, EasyDrive (hydrostatic drive) (SN), rotating beacons, gross vehicle weight 3,500 kg, payload 650 kg, self-propelled working machine. For sales to commercial customers and for export (both EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide a quote via our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. More trucks and commercial vehicles can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Bjdexb Dghjpfx Agtewl We offer and strongly recommend an on-site inspection and examination of the goods to avoid any misconceptions regarding their condition and suitability for the buyer. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are given without guarantee. No liability for mistakes or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale and errors.

Leto izdelave: 2021, stanje: novo, Affordable quality hardness tester for Rockwell C, B, A methods. Analog dial gauge, manual operation, dead weight loading system, compliant with ISO 6506, 2-year warranty. Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Test loads: Preload 10 kgf, main loads 60 | 100 | 150 kgf Bsdpfxsbt Drpj Agtowl Adjustable hydraulic damping of the loading system Adjustable analog indicator clock, graduation 0.5 HR, readability 0.1 HR units Throat depth 150 mm Test space height 240 mm Conforms to Rockwell testing standard EN-ISO 6508, ASTM E-18 Net machine weight 126 kg Machine dimensions: height 765 mm / width 270 mm / depth 555 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, The device has undergone a complete overhaul, with a full set of bearings and seals replaced. The machine comes with a warranty and is supplied complete with a separation kit. Bodpfxjwv Rc Ue Agtowl

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6412185, Leto izdelave: 2016, obratovalne ure: 1.547 h, nosilnost: 2.000 kg, vrsta goriva: električni, gradbena višina: 1.300 mm, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, Low-lift pallet truck Chassis number: 6412185 Condition: Ready for operation and fully functional Technical condition: good Description: BT LWE 200 Ref.: R0513 Year of manufacture: 2016 Operating hours: 1,547 Units are sold without UVV inspection and in as-is condition! Charger available upon request. Fast and uncomplicated transport possible by arrangement! The listing serves solely to identify the device! A detailed description of the condition as well as possible equipment features is provided individually upon request! Subject to errors and prior sale, sale only to commercial customers. All used equipment is sold without warranty and/or guarantee. If you have not found your forklift, please contact us. We have a large selection of additional units available on site. Initial lift, Initial lift Bwjdpfx Agevthuqjtol

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6537441, Leto izdelave: 2017, obratovalne ure: 4.515 h, nosilnost: 2.000 kg, dvižna višina: 2.100 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.535 mm, dolžina vilic: 1.150 mm, vrsta pogona: Elektro, High-lift pallet truck Chassis number: 6537441 Bwodpfxouhwrps Agtel Mast type: Standard Condition: Ready for use and fully functional Technical condition: Good Battery voltage: 24V Description: BT SWE 200 D No.: M0416 Year of manufacture: 2017 Operating hours: 4515 The machine is in good visual and technical condition. Charger available on request. We currently have eight more units of this model type with standard mast in stock. All units have a fork length of 1150mm, lifting heights range from 1700mm to 2100mm, and overall heights range from 1335mm to 1540mm. Operating hours range from 1442h to 8844h. Fast and uncomplicated transport available upon agreement! This listing is for identification purposes only! A detailed description of the condition and possible equipment is provided individually on request! Errors and prior sale excepted, sale only to business customers. All sales of used equipment are made under exclusion of liability for defects and/or warranty. If you have not found your desired stacker, please contact us. We have a large selection of additional units onsite. Initial lift,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6773986, Leto izdelave: 2020, obratovalne ure: 2.342 h, nosilnost: 2.000 kg, dvižna višina: 2.130 mm, vrsta goriva: električni, tip droga: simpleks, gradbena višina: 1.550 mm, dolžina vilic: 1.200 mm, lastna masa: 930 kg, vrsta pogona: Elektro, High-lift pallet truck Chassis number: 6773986 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Description: BT SWE 200 D No.: R0515 Year of manufacture: 2020 Operating hours: 2,342 Units are sold without UVV inspection and in as-is condition! Charger available on request. The unit is in good visual and technical condition. Fast and uncomplicated transport can be arranged upon request! This advertisement is for identification purposes only! A detailed description of the condition and possible equipment options is available individually on request! Errors and prior sale reserved, sale only to commercial customers. All used equipment is sold without warranty or guarantee. If you have not found your forklift, please contact us. We have a large selection of further machines available onsite. Initial lift, Bodevthu Djpfx Agtewl Initial lift

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 6576230, Leto izdelave: 2016, obratovalne ure: 1.378 h, nosilnost: 2.000 kg, vrsta goriva: električni, gradbena višina: 1.300 mm, dolžina vilic: 1.200 mm, lastna masa: 560 kg, vrsta pogona: Elektro, Nizko dvižni paletni viličar Številka šasije: 6576230 Tehnično stanje: zelo dobro Bjdpfx Agexnd U Eotewl Prednje pnevmatike: poliuretan Zadnje pnevmatike: poliuretan Napetost baterije: 24V Letnik baterije: 2018 Opis: BT LWE 200 Št.: M0575 Letnik: 2016 Delovne ure: 1.378 Naprava je vizualno v običajnem in tehnično v zelo dobrem stanju. Pridržujemo si pravico do napak in predčasne prodaje. Če želenega viličarja niste našli, nas kontaktirajte. Na voljo imamo še mnogo drugih naprav.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, številka stroja/vozila: 2200387535,

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Mixer grinder / meat mincer Kolbe MWE-32 In good used and fully functional condition. Bwodpfxjwcgr Eo Agtol Belts and motor are new. The unit runs on 400 volts, is constructed entirely of stainless steel, includes a mixing paddle, 98 cm Enterprise system, workshop tested, ready for immediate use. Feeding device FD 200, year of manufacture 2009. The machine itself is from 2007. Further details available upon request. Payment by cash or advance bank transfer. Sale only to commercial customers. No warranty or guarantee.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20241204, skupna višina: 905 mm, skupna masa: 550 kg, skupna dolžina: 1.200 mm, skupna širina: 1.200 mm, vrsta vhodnega toka: trifazni, kapaciteta rezervoarja: 220 l, uporabna prostornina rezervoarja: 110 l, vhodna napetost: 400 V, širina obdelovanca (maks.): 200 mm, višina obdelovanca (maks.): 200 mm, zunanji premer: 200 mm, dolžina obdelovanca (maks.): 200 mm, vrtljajska hitrost (min.): 1.400 obr/min, notranja širina: 240 mm, moč: 4,5 kW (6,12 KM), vhodna frekvenca: 50 Hz, trajanje garancije: 12 meseci, nosilnost: 100 kg, Maize Dryer Vibra-Dry DK 200 WT with pneumatic discharge and steel floor. For sale is a high-quality maize/grain dryer Vibra-Dry DK 200 WT with a working volume of 220 litres. This versatile machine is ideal for drying and polishing with crushed corn granulate, resulting in a flawless, glossy surface. Main features: Working principle: Moist parts are automatically conveyed from the circular vibrator to the dryer via the separating table. Pneumatically operated discharge valve: For automatic emptying after drying. Coating: Inner walls as well as inlet and outlet areas feature a durable 2-component PU coating to reduce wear and minimize noise. Temperature control: Adjustable between 30°C and 50°C via manual control in the electrical cabinet, with settings for 0%, 50%, and 100%. Automatic temperature maintenance by switching the heater on and off as needed. Technical details: Filling with approx. 10-15% crushed maize granulate (25 kg recommended). Bedsvi Nhdspfx Agtswl Start-up: Use of maize kernels GM 16 or GM 20 required. This machine is reliable, robust, and ideal for businesses that prioritize quality and efficiency. Enquire now!

Stanje: dober (rabljeno), Leto izdelave: 2014, prva registracija: 06/2014, vrsta goriva: dizel, barva: rdeča, gorivo: dizel, Swingo 200 + - Krmiljenje na 4 kolesa - Nizozemska registracija Letnik: 30-6-2014 WSVS462S2E1730012 TZR-38-N = Dodatne informacije = Bwsdpsxcnynsfx Agtol Namen uporabe: interna logistika Dovoljena skupna masa: 4.500 kg Tehnično stanje: dobro Vizualno stanje: dobro Registrska številka: TZR-38-N Za več informacij kontaktirajte VAEX The Truck Traders.

Stanje: dober (rabljeno), Na voljo 10 rabljenih zabojnikov. Trenutno je na voljo 760 novih zabojnikov. Bedpjq Ih H Eefx Agtowl

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, lastna masa: 28.000 kg, največja dovoljena obremenitev: 200.000 kg, velikost pnevmatike: 235/70 17.5, Leto izdelave: 2026, model šasije: Lider Heavy-Duty Chassis, Oprema: ABS, Težko tovorna nizkoposteljna polprikolica. Lider Trailer za težko tovorne prikolice. Visoka kakovost in vzdržljivost izdelave. Standardi EU. Zaviralni sistemi EBS ali dvocevni sistem. Enoletna garancija za proizvodne napake. Proizvodnja 2026. Barva po želji kupca. Bwedpfxsrcb Eaj Agtjl

Stanje: novo, Tlačna sila 200 kN Največji hod 200 mm Delovna hitrost 10 mm/s Hitrost povratka 20 mm/s Dimenzije mize 480x1060 mm Delovna višina 900 mm Največja višina orodja 200 mm Skupna potreba po energiji 2,2 kW Upogibna zmogljivost 200x12 mm Največja upogibna zmogljivost - okroglo 48x4,0 mm Teža 500 kg Dimenzije stroja 1010x480x1120 mm Dodatki: - Avtomatski nadzor (99 programov po 16 korakov) - Z vijaki (brez utiskača) - Nosilec orodja za matrice Bodpfx Agey H N E Notswl - Nožna pedala - Matrice V-63 - Utiskač R5

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, obratovalne ure: 44.590 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, kapaciteta rezervoarja za olje: 3.100 l, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2025, Technical Data of the Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of manufacture: 2002, partially overhauled in December 2025 Operating hours: 44,590 hours (as of December 2025) Main press force: 200 t Specific press force: 16.5 kg/cm² Feed hopper dimensions: 2,000 x 1,020 mm Filling volume: 2.65 m³ Theoretical throughput: 795 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput (MSW): approx. 48 to 54 t/hour, depending on material Hydraulic oil tank volume: 3,100 L Machine weight (press): approx. 50.8 t Scope of delivery: • 1 MACPRESSE baler, model 111A • 1 operating manual with CE declaration, electrical and hydraulic schematic diagrams Notes: The machine has been serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank fully drained and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Dismantling of the press ram, disassembly into individual parts, overhauling the mechanism • Replacement of the front two main running rollers • Replacement of the knives on the press ram • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal kit replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement with wear-resistant HARDOX steel floor plate • Dismantling of the binding and twisting unit, disassembly into individual parts, overhauling the mechanism, replacement of all twisting shafts and ball bearings • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains lubricated and tensioned • All wire deflection rollers overhauled • All door contact switches replaced • Wirbulator dismantled, disassembled, and overhauled • General maintenance work performed Bodpox Dnb Usfx Agtswl Finally, the baler was subjected to a machine test in manual and automatic mode; see our video for the function test of the machine. Complete documentation (operating manual, CE declaration, electrical/hydraulic schematic diagrams) is available. An inspection is possible by appointment. No liability is assumed for technical specifications or possible errors.

Stanje: novo, 60.06 linear meters of shelf racks, 60 cm deep – workshop shelving, storage racks, manual storage, boltless shelving, small parts storage Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 60.06 linear meters Rack package 60.06 lfm, consisting of: - 61 uprights, approx. 200 x 60 cm, disassembled (incl. 2 x foot plates & 2 x end caps each) - 300 shelves, approx. 100 x 60 cm - 1200 shelf supports - 61 cross braces, 1176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: Sendzimir galvanized - New stock, immediately available - Made in Germany - 100% quality at the best price Optional: Pre-assembly of the frames can be carried out by us for a small additional charge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €8,000.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Bwedey Iw E Topfx Agtel Delivery is available on request by our partner forwarding agent, shipping costs are postcode-dependent. Assembly: Our trained staff are also available to assist with professional assembly and dismantling of your equipment if required. Our recommendation: Please let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to assembly.

Stanje: novo, 60.06 linear meters of shelf racks, 40 cm deep: workshop shelving, storage shelves, wide span shelves, hand storage, shelving for small parts. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 60.06 linear meters Shelf rack package 60.06 lm consisting of: - 61 uprights approx. 200 x 40 cm, disassembled (incl. 2 feet & 2 top caps each) - 300 shelves approx. 100 x 40 cm - 1,200 shelf supports - 61 diagonal braces 1,176 mm (for cross bracing) - 61 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock from warehouse - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small extra charge of €2/net per unit. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €5,610.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery is arranged by our partner freight forwarder upon request, costs depend on postal code. Assembly: Our trained staff is available to provide professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Bwjdpfxsy Iw Eae Agtel Let us know your requirements... We are happy to support you with your project—from planning and ordering through to installation.

Stanje: novo, 15.06 linear meters of shelving racks, 60cm deep, workshop racks, warehouse shelving, large compartment racks, hand storage, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 15.06 linear meters Rack package, 15.06 linear meters, consisting of: - 16 uprights, approx. 200 x 60 cm, disassembled (incl. 2 feet & 2 end caps each) - 75 shelves, approx. 100 x 60 cm - 300 shelf brackets - 16 diagonal braces, 1176 mm (for cross bracing) - 16 turnbuckles (for cross bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Surface: sendzimir galvanized - New stock available for immediate delivery - Made in Germany - 100% quality at the best price Frame pre-assembly can be carried out by us for a small surcharge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €2,116.00 net plus legally applicable VAT You will receive an invoice with VAT shown separately Transport: Delivery can be arranged by our partner forwarding agent on request; costs are dependent on postal code. Installation: Our trained personnel are available to assist you with the professional installation and dismantling of your equipment if required. Bsdpsy Iwz Usfx Agtewl Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects, from planning and ordering to installation.

Stanje: novo, 30.06 linear meters of shelving racks, 40 cm deep, workshop racks, storage racks, wide-span shelving, manual storage, shelving racks, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 30.06 linear meters Bjdsy Iwywepfx Agtjwl Rack package 30.06 lfm consisting of: - 031 uprights approx. 200 x 40 cm, disassembled (incl. 2 x base plates & 2 x end caps per upright) - 150 shelves approx. 100 x 40 cm - 600 shelf supports - 031 cross braces 1176 mm (for bracing) - 031 turnbuckles (for bracing) - Manufacturer: META CLIP - Load capacity: 150 kg per shelf with evenly distributed load - Levels: 5 storage levels - Finish: sendzimir galvanized - New goods ex stock - Made in Germany - 100% quality at the best price Pre-assembly of frames can be carried out by us for a small surcharge of €2/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €3,661.00 net plus legally applicable VAT You will receive an invoice with VAT statement. Transport: Delivery can be arranged via our partner forwarding company on request, shipping costs are postcode-dependent. Assembly: Our trained staff are available to provide professional assembly and disassembly of your facility on request. Our recommendation: Let us know your requirements… We are happy to assist you in realizing your projects, from planning to ordering and assembly.

Stanje: novo, 15.06 linear meters of shelving racks, 40 cm deep, workshop shelves, storage racks, manual storage, boltless racking, small parts storage Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 15.06 linear meters Shelf package 15.06 linear meters, consisting of: - 016 x upright frames approx. 200 x 40 cm, disassembled (incl. 2 x feet & 2 x end caps per upright). - 075 x shelves approx. 100 x 40 cm. - 300 x shelf supports. - 016 x cross braces 1176 mm (for diagonal bracing). - 016 x turnbuckles (for cross bracing). - Manufacturer: META CLIP. - Load capacity: 150 kg per shelf with evenly distributed load. - Levels: 5 storage levels. - Surface finish: Sendzimir galvanized. Bjdpfxoy Iwyqo Agtowl - New stock, available from warehouse. - Made in Germany. - 100% quality at the best price. Pre-assembly of the frames is available upon request for a small additional charge of €2 net per piece. -- AVAILABLE IMMEDIATELY IN MULTIPLE QUANTITIES -- Price: €1,648.00 net plus statutory VAT. You will receive an invoice showing VAT separately. Shipping: Delivery is available upon request through our partner forwarding agent. Delivery costs depend on the postal code. Assembly: Our trained staff is available, if required, to professionally assemble and disassemble your equipment. Our recommendation: Let us know your requirements… We are happy to assist you with your projects, from planning and ordering through to assembly. Do you have questions or are you interested? Contact us simply by message or phone. Our phone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: rabljeno, Leto izdelave: 2010, Laserski rezalni stroj Proizvajalec: Eurolaser Tip: LCS XL-1600 Leto izdelave: 2010 Moč: 200 W Delovno območje: 2.270 mm x 1.600 mm Električni podatki: maks. 6 kW / maks. 32 A Predhodna uporaba: Rezanje akrilnega stekla Bjdpfx Agsyvk R Eotowl Laserski vir je bil zamenjan pred 5 leti

Stanje: novo, Leto izdelave: 2024, The Wattsan 200W is a brand-new portable laser metal cleaning machine. Thanks to its air cooling system, the unit is quite compact. It is quiet, fast, and easy to operate, even for beginners. It is ideal for removing rust, paint, petrochemicals, oxide layers, welding scale, carbon deposits, and more from metal components. This portable machine can also clean adhesive residues, galvanized materials, as well as gypsum and stone products. With its pulse cleaning technology, this machine can remove thick layers of rust, paint, petroleum products, oxide layers, scale, and carbon deposits from metals without heating or damaging them. For further information, please contact our managers! Features of the Wattsan Cleaning 200 W: - Cooling system: Air - Laser power: 200 W - Machine dimensions: 750x600x680 mm - Laser source: JPT - Weight: 46 kg Virmer not only offers top-class machines, but also provides service and delivery. Our engineers and managers are ready to answer all your questions and, if necessary, offer video support. Additionally, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engravers, but also metal cutters, welding equipment, markers, and cleaning machines. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and is constantly evolving with the help of its customers. Thanks to their customers' feedback, Wattsan has implemented over 50 upgrades, making their machines more reliable, precise, and powerful—enabling you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR NEEDS If you are looking for the right laser or CNC milling machine, we are happy to assist. Bwedpfjr Hbx Tsx Agtsl We offer a wide range of laser machines and equipment: - CO2 laser machine - Metal laser cutting machine - Laser metal cutter - Fiber metal laser - Fiber metal laser engraving machine - CNC milling machine for metal - Wood milling machine - CNC milling machine - Laser engraving machine - Laser engraver - Plywood laser cutting machine - Laser engraver - Metal laser cutting machine - CNC milling machine - Laser marker - Lenses - Chillers - Cooling system for machines - S&A chiller - IPG laser, MAX Photonics, Raycus - Compressor - Rotary device - Mirrors for laser machines.

Stanje: rabljeno, prevoženi kilometri: 279.000 km, moč: 77 kW (104,69 KM), vrsta goriva: bencin, vrsta prenosa: samodejen, prva registracija: 11/1988, emisijski razred: Euro 3, barva: rdeča, število sedežev: 5,

Stanje: rabljeno, TIG welding machine, TIG welder NIMAK type GS 200 W TIG and DC stick welding machine, also suitable for MMA (manual metal arc) electrodes Serial No. 26642, Year of manufacture approx. 1983 Output: 200 amps at 60% duty cycle Bsdedzqbvepfx Agtjwl 150 amps at 100% duty cycle Steplessly adjustable power range Power supply: 380 V, 50 Hz, 32 A plug - 5 m TIG torch package - HF ignition - Stepless current adjustment and current rise control - Connection for stick electrode welding - DC only - Water cooled - Shielding gas pressure regulator Required space (L x W x H): 900 x 590 x 1000 mm Weight: approx. 200 kg Good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, barva: drugo, Leto izdelave: 2026, * Vsi naši izdelki so izdelani skrbno in so zajeti z 1-letno garancijo! * Montaža in usposabljanje operaterja BREZPLAČNO FABO izdeluje in postavlja stacionarne naprave za sejanje in pranje kamna v skladu z zahtevami kupca. Proizvodna zmogljivost naših stacionarnih obratov se giblje od 100 do 1000 ton na uro. Bodpey Dpf Rjfx Agtswl Kapaciteta postrojenja za pranje in sejanje: 200–350 ton/uro - Dozirni zabojnik za rečni kamen - Vibracijsko sito 1300x4000x2 nivoja - Vibracijsko sito 2000x6000x4 nivoja z izpiralnim sistemom - Odtokovno sito 1500x4000 mm s hidrociklonom - Transportni trakovi - Nadzorna omara in avtomatizacijski sistem ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE!