Rummel Kunststofftechnik Gmbh Regulator Temperature Vode nakup rabljenega (73.056)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. Hedeu Ey Dlspfx Alfefg For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Hfedshc T Nlspfx Alfog

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: 7007490, Lastna teža: 14.300 kg, Dimenzije: dolžina: 6,9 m, širina: 2,5 m, višina: 2,55 m, Dimenzija zabojnika: 6,5 m, Številka drobilca: 103334 Hfsdpfx Alsy Rvlqsfog

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: CS418-03-08, Lastna teža: 7900 kg, priključna moč: 15 kW, mere kontejnerja: dolžina: 6,5 m, širina: 2,3 m, višina: 2,64 m Hodpfxey Rvmno Alfefg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Dressing Machine for Grinding Wheels: Simple manual operation, robust and precise Technical specifications: Diamond grinding spindle: HSK-50 or as per customer request (e.g. SK-40, Perfect Arbor, etc.) Max. dressing wheel diameter: ø300mm Max. dressing wheel width: 20mm Max. grinding wheel diameter: up to ø250mm Grinding wheel speed: 0-1500 rpm (infinitely variable) Travel range left/right: 135mm Travel range forward/back: 135mm Dressing wheel diameter (silicon carbide): ø180x10xΨ32mm Approx. 98 degrees traversable on both sides Hjdpfoha Eh Hjx Alfofg Dressing wheel speed: 0-2800 rpm (infinitely variable) Oscillation frequency of dressing wheel: 0-50 cycles/min (infinitely variable) Dressing wheel oscillation stroke: 0-50mm (adjustable) X/Y axis optical scale resolution: 0.001mm Capabilities: profiling of radii, dressing multiple wheel sets Electrical connection: 380V, 50Hz, total power approx. 1.5kW DXF import included Camera system with live transmission via 23" monitor included Latest software generation GWDress-Studio with automatic AI measurement included

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to a diameter of 250 mm. Thanks to selectable manual or automatic control, dressing processes can be flexibly and highly efficiently configured. Performance Data: - Rotary and feed axes, CNC-controlled - Diamond grinding spindle: HSK-50 or per customer request (e.g., SK-40, Perfect Arbor, etc.) - Max. dresser wheel diameter: ø300 mm - Max. dresser wheel width: 20 mm - Max. grinding wheel diameter: up to ø250 mm - Grinding wheel speed: 0–1500 rpm (infinitely variable) - Range of motion, left/right: 135 mm Hodjw E E S Aopfx Alfefg - Range of motion, forward/backward: 135 mm - Dresser wheel dimensions (silicon carbide): ø180x10xΨ32 mm - Approx. 98 degrees traversable on both sides - Dresser wheel speed: 0–2800 rpm (infinitely variable) - Dresser wheel oscillation frequency: 0–50 cycles/min (infinitely variable) - Dresser wheel oscillation length: 0–50 mm (adjustable) - X, Y axis optical scale system: 0.001 mm - Capabilities: Profile dressing, disc pack dressing - Connection: 380V, 50Hz, total power approx. 1.5 kW - DXF import included - Camera system with live transmission to a 23" monitor included - Latest software generation GWDress-Studio with automatic AI measurement included - Country of origin: Austria

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. --> Technical data Mains connection: 3/PE AC 400 V Hfsdpfx Alewf Rg Sofog --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm Hodpowf Rg Eefx Alfjfg The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). Hodpfowf Rgxsx Alfjfg --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. Hfodpswf Rgrefx Alfeg In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: novo, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 540 mm, skupna širina: 2.000 mm, velikost pnevmatike: 23x9-10, stanje pnevmatik: 100 odstotek, barva: oranžna, Leto izdelave: 2026, Platformni transportni voziček Nosilnost: 10.000 kg Dolžina nakladalne površine: 8.000 mm Širina nakladalne površine: 2.000 mm Višina nakladalne površine: 540 mm Transportno dno: 30 mm duglazija, poglobljeno in privijačeno Privezne oči na vsaki vzdolžni strani: 5 kosov Barva: RAL 2000 Vlečna ojnica z nastavitvijo višine in varovalom proti padcu Dvodelni podporni zagozd Hfsdpfoit Twuex Alfjg Superelastične pnevmatike 23x9-10 s kovinskim platiščem in stožčastim ležajem Vse-kolesno krmiljenje Sled in krmilne palice nastavljive z zgibnimi očesi

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading platform. Dimensions: 6000 x 2400 x 900 mm with a turntable steering system on the front axle and a fixed trailing axle. Pneumatic tires 7.00-15. Equipped with an overrun brake and a parking brake on the steering axle. Transport floor made of 30 mm wood, or optionally 18 mm phenolic resin coated plywood for an additional €220. At the front (in the direction of travel) a 1000 mm high front wall with grille, 40 mm mesh size. Lashing points along the sides for securing the load. Optional lighting system available for an additional €980, including a spiral connection cable. Standard paint finish in RAL 2000; other colors available on request for newly manufactured units. Hedpokzhqxsfx Alfsfg

Stanje: skoraj kot novo (rabljeno), lastna masa: 2.300 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.300 kg, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, velikost pnevmatike: 450x300, barva: oranžna, Leto izdelave: 2025, obratovalna teža: 20.000 kg, Težki transportni priklopnik z mero 5000 x 2000 x 610 mm. Nosilnost 20 ton pri 6 km/h. Krmiljenje z vsemi kolesi, osne čepne ročice z nastavljivimi sledilnimi palicami. Obloge 450 x 300 na jeklenih platiščih z obojestranskimi konusnimi ležaji. Vlečna os z kovanim vlečnim ušesom 40 mm in zavarovanjem proti izpadu. Transportno dno iz 40 mm smreke, utopljeno in privito. Na vsaki vzdolžni strani na okvir privarjene pritrdilne zanke za varovanje tovora. Na okviru nameščena dvodelna zagozda za kolesa. Hsdpfx Aen D D S Solfofg

Stanje: novo, lastna masa: 3.400 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 33.400 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.200 mm, velikost pnevmatike: 559x300, Leto izdelave: 2026, TPW 30 VL - LK Prednja os krmiljena preko obračalne šasije Zadnja os tog Dolžina 6000 mm Širina 2200 mm Vlečna drog z varovalom proti padcu in nastavitvijo višine Kolesa z obročem 559x300 s kovinskimi platišči Hfjdpfx Aehbmu Ijlfeg Na vsaki vzdolžni strani 5 omejevalnih blokov za pritrjevanje tovora Barva RAL 2000 modra Transportno dno iz lesa, 40 mm, vgreznjeno in privijačeno #Težki transport #Sistemi notranjega transporta #Težke prikolice 6-100 ton #Težke prikolice od 3 do 100 ton #Transportni platformni voziček za težke tovore #Platformne težke prikolice #Krmiljenje vseh koles #Transportni voziček

Stanje: novo, Leto izdelave: 2025, Plasma cutting system for tubes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After the workpiece is manually loaded, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured with light curtain - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power consumption (machine): 400V 3P 2KW Hjdpfsgu Nmhjx Alfjfg - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The pictures show an older machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Plasma cutting system for pipes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via the CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be accessed easily via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - Suitable for round pipes up to max. OD = 150 mm - Suitable for square pipes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle Hfodjg Dvdcopfx Alfsg - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply for machine: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The pictures show an older, larger machine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Hodpetr U Hlofx Alfsfg Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hodpfx Asttah Relfofg Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Plazmový řezací systém pro trubky a profily Stroje pro plazmové řezání trubek a profilů. Řezací kontura je definována a vytvořena pomocí CAM softwaru. Vytvořený CNC kód je následně přenesen do stroje přes USB nebo síť. Program lze jednoduše zvolit přes 12" dotykový displej. Po ručním vložení obrobku se spustí automatický řezací proces. - Délka trubky: max. 6000 mm - Pro kruhové trubky do max. vnějšího průměru 150 mm - Pro čtyřhranné trubky do max. 101,6 x 101,6 mm (4"x4") - Maximální hmotnost trubky 150 kg - Čtyřčelisťové sklíčidlo - Možnost bočního nakládání, zajištěno světelnou závorou - Plně automatický řezací proces - Průmyslové PC řízení s 12" dotykovým displejem Hsdpfx Alox Ebzqofjfg - Import dat přes USB a LAN - Připojení: 400V 3fázově, 2 kW - Rozměry: 690x100x180 cm - Hmotnost: cca 800 kg Vyrobeno v Německu Obrázky ukazují obdobný stroj.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Grinding Wheel Dressing Machine: Easy to operate, robust, and precise Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of user-friendly operation and exceptional stability. The solid granite bed ensures maximum precision and durability, while the intuitive controls optimize efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you both time and money. Ideal for anyone who values reliable performance and outstanding value for money! Hfodpfxoubbrto Alfog

Leto izdelave: 2008, stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 346100, Machine SAR-1000-B-015, incl. dodatki: ekstrakcijska enota ULT ASD 300 Ex. Uporabniški priročnik je na voljo kot PDF. Hodsxwvruopfx Alfsfg Stroj je trenutno v stanju, kot je prikazano na slikah. Po potrebi ga lahko za prevzem postavimo na palete. Stroj je pregledalo podjetje Schunk; ugotovljen je bil potreben naslednji rezervni material: - z-os - Ležaji osi Y1 + Y2 - Zamenjati napajalni kabel, kabel Hallsensorja in pnevmatske cevi - Zavora osi X - Priključek za odsesavanje + cev za odsesavanje - Senzor shuttle (B4.3/E) - Nosilci orodij (5 kos) - Zamenjati UPS - Krtača pritrdila - Žarnica za signalno luč - Tesnilni obroček pritrdila, pnevmatski cilinder, vodilna os + drsna puša, pritrdilna plošča vretena - Zunanji izpušni kanal ULT - Dvižni cilinder mize (?) - Po podatkih podjetja Schunk materialni stroški cca 16.000 € Ker stroj prodajamo kot okvarjen/potreben popravila in smo navedli vse znane napake, se blago prodaja z izključitvijo kakršne koli garancije in stvarne napake.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm Hsdpfxeyx Hgbj Alfofg • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination Hfedpoyxccrofx Alfsg • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Hedpfx Ajxt Dk Rslfsfg Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design Hodpfxeyx Hrkj Alfefg • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)