Ročni Stroj Za Upogibanje Vrtljivih Strešnih Kritin nakup rabljenega (96.527)

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, FACCIN HAV 3162 Kodpfjiivgyox Ag Todr Variable 3-Roll Plate Bending Machine Electronically controlled, hydraulic 3-roll plate bending machine Technical Data: Number of rolls: Three Side roll geometry: Variable Working width: 3,050 mm Top roll diameter: 620 mm Side roll diameter: 550 mm Pressing force against top roll: 630 tonnes Working pressure at rated force: 250 bar Guaranteed installed power: 55 kW (75 HP) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600 mm Width: 3,700 mm Height: 3,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full width): 75 mm Pre-bending capacity (full width): 48 mm From pipe diameter: 3,100 mm Rolling capacity (full width): 55 mm Pre-bending capacity (full width): 40 mm From pipe diameter: 805 mm Standard Equipment: Variable geometry with linear guides for roll movement Extra-long drop-end bearing for increased frame stability Electronic Parallelism System (EPS) Hardened rolls for high wear resistance All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hi-tech hydraulic and electrical package Simultaneous rotation and roll movement Safety pull cord with emergency stop and CE certification Centralised lubrication Water cooling for hydraulic system Cone bending device Prepared for retrofit of supports and roller tables FACCIN Advantage Package AP

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, 4 HEL 3128 Four-roll Plate Rolling Machine Electronically controlled, hydraulic four-roll plate rolling machine Manufacturer: FACCIN, Model 4 HEL 3128 Technical data: Number of rolls: Four Side rolls geometry: Linear guides Working width: 3050 mm Top roll diameter: 285 mm Bottom roll diameter: 275 mm Side roll diameter: 205 mm Certified roll hardness: 950-1050 N/mm² Pressing force against top roll: 150 tons Kodpfx Ageiink Sj Tedr Working pressure at maximum force: 190 bar Guaranteed installed power: 11 kW (15 HP) Guaranteed maximum rolling speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450 mm Width: 1,520 mm Height: 1,450 mm Guaranteed capacities: With material yield strength 260 N/mm² Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm from pipe diameter 1,425 mm Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for roll movement Extremely wide bearing blocks MCS double bearing system for roll rotation Extra heavy-duty, double end-stopped swing bearing Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulic and electrical package Safety tripwire with emergency stop and CE certification Central lubrication Cone bending device FACCIN AP package CNC control PGS-ULTRA

Stanje: novo, Leto izdelave: 2026, premer gredi: 80 mm, Stroj za upogibanje profilov AHB 80 - elektrohidravlični stroj za upogibanje krogov/profilov - hidravlična nastavitev spodnjih valjev - spodnji valji so nastavljivi posamično - tri pogonjeni valji - deljeni segmenti valjev - digitalni prikazovalnik - zaslon na dotik - kaljeni valji in standardni valji - hidravlično nastavljiv stranski izravnalnik Kjdpfxjqxcy Hj Ag Todr - primeren za horizontalno in vertikalno uporabo - mobilna upravljalna konzola - oznaka CE / izjava o skladnosti Premer valja 80 mm, kaljen v celoti hidravlični Motor 400 V 50 Hz 3-fazni Teža približno 1.700 kg Dimenzije 1340 x 1390 x 1640 mm

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, številka stroja/vozila: CA90H2 PIPE BENDING ROLL, premer gredi: 90 mm, premer valja: 260 mm, vrtljajska hitrost (min.): 8 obr/min, največja hitrost vrtenja: 8 obr/min, skupna masa: 1.000 kg, skupna dolžina: 1.260 mm, skupna širina: 1.000 mm, skupna višina: 1.260 mm, moč: 3,68 kW (5,00 KM), vhodna napetost: 380 V, vrsta vhodnega toka: trifazni, obratovalna hitrost: 8 mm/s, premer valja: 260 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, PROFILBIEGEWALZEN, WELLEN-AUSGANG 90 MM – ROHRBIEGEWALZE MARGI CA90H2, BAUJAHR 2007 WELLEN AUSGANGSGRÖSSE: 90 MM Kdodpfxswkrr To Ag Tor SATZ UNIVERSALWALZEN, DURCHMESSER 260 MM SEITLICHE RICHTWALZEN LINKS/RECHTS, SCHRAUBENVERSTELLUNG 4 WALZENSÄTZE FÜR ROHRBIEGEN: 61 – 78 – 90 – 116 MM KONSOLE ELEKTRISCH FAHRBAR AUF ROLLEN, ALLE BEDIENELEMENTE ZENTRALISIERT DIGITALE ANZEIGE DER WALZENPOSITION OBERE WALZE ANGETRIEBEN, ELEKTROMOTOR MIT GETRIEBE SEITENWALZEN HYDRAULISCH EINZELN VERSTELLBAR MIT KOLBEN MASCHINE REVERSIERBAR – BETRIEB MIT WELLEN VERTIKAL/HORIZONTAL MÖGLICH SICHERHEITS- UND NOT-AUS-AUSRÜSTUNG AN DER MASCHINE INSTALLIERT BEDIENUNGSANLEITUNG UND SCHALTPLAN IM ORIGINAL MIT DER MASCHINE GEWICHT: 1.000 KG ABMESSUNGEN: 1.260 X 1.000 X H 1.260 MM

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 91212035, Ponudba 26016 Tehnični podatki: - največja delovna širina: 2040 mm - največja debelina materiala pri trdnosti 40 kg/mm²: 4 mm - elektronsko prednastavljiva nastavitev kotov upogibanja: 0 - 135 ° - avtomatski procesni nadzor za popoln delovni cikel Kjdozgu Tispfx Ag Tjdr - največja odprtina / hod zgornje čeljusti: 350 mm - nastavljivost po višini: - upogibna čeljust: 100 mm - spodnja čeljust: 100 mm - pogon zgornje čeljusti: 400 V / 4 kW - pogon upogibne čeljusti: 400 V / 4 kW - dodatki: - motorizirano nastavljanje upogibne čeljusti - zadnji omejevalnik nastavljiv z ročnim kolescem - električno nožno stikalo - potrebna površina z zadnjim omejevalnikom: cca Š 3200 x V 1650 x G 2100 mm - teža cca: 4500 kg

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: - Wire diameter range: 0.5 – 4.0 mm Kodjtqf Iqepfx Ag Tsdr - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 4806067, Offer 25059 Technical Data: - Bending capacity: Pipe at 45 kg / mm² up to Ø 48 x 3.5 mm - Solid material up to 30 mm - Bending angle: 0 – 180° - Maximum mean bending radius (Rm): 225 mm Kodpfx Agev Dux Ds Tjdr - Minimum inner bending radius (Ri): 10 mm - Drive: 220 V / 1.7 kW - Space requirement approx.: W 400 x H 950 x D 600 mm - Weight approx.: 100 kg - With presettable bending angle - Digital bending angle display + fine adjustment for bending angle - Bending tools: Ø ½" R 67 mm, Ø 1" R 67 mm,

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1992, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, premer gredi: 100 mm, premer valja: 300 mm, radij upogibanja (maks.): 500 mm, minimalni polmer upogibanja: 500 mm, vrtljajska hitrost (min.): 5 obr/min, največja hitrost vrtenja: 5 obr/min, Premer cevi (maks.): 115 mm, Debelina stene cevi (maks.): 3 mm, skupna masa: 2.700 kg, skupna dolžina: 150 mm, skupna širina: 150 mm, skupna višina: 150 mm, moč: 7,35 kW (9,99 KM), vhodna napetost: 380 V, obratovalni tlak: 200 letvica, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, kaljeni valji, nujno zaustavitev, Profilna upogibanka, model PP100 Izhodne gredi: 100 mm Popolnoma hidravlično upravljano samostojno gibanje spodnjih gredi, piramidni pritisek - Vse tri gredi poganjane s pogonsko enoto z zobniki in hidravličnim motorjem - Bočni korektorji levo/desno za vodenje in poravnavo profila - Komplet valjev z dodatnimi valji za upogibanje različnih oblik profilov - 7 kompletov valjev za upogibanje cevi od 1,5” do 4,5” (glej fotografijo v prilogi) Kdjdpfx Agoywhamo Tor - Centralizirana električna nadzorna plošča z digitalnim prikazom položaja - Varnostna in nujna oprema - Napetost 3f 380/50 – 10 KM - Priložena tabela kapacitet

Stanje: rabljeno, Semi-automatic tube bending machine, rotary draw tube bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Serial No.: Year of manufacture: For simultaneous bending of two steel tube sections up to Ø 12 mm Bending angle max. 90° Tube diameter max. 12 mm Mandrel length approx. 65 mm Rated power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Power supply 400 Volt, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Angle input control via STÖBER Controlbox Series 4000/5000 - SIEMENS S7-200 control with TD200 display - Machine is offered without bending tools and without tool storage bolts 25 x 183 mm - Only 1 bending mandrel is present (see pictures). Space requirement (L x W x H): 1000 x 1000 x 1500 mm Ksdpfepu R Nvex Ag Todr Weight: 390 kg In good condition

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN Kedpfx Agen E N Ndj Todr - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, premer spodnjega valja: 310 mm, premer zgornjega valja: 320 mm, premer valja: 310 mm, dolžina valja: 1.550 mm, delovna širina: 1.500 mm, najv. debelina jeklene pločevine: 38 mm, skupna masa: 12.500 kg, skupna dolžina: 4.500 mm, skupna širina: 2.300 mm, skupna višina: 1.740 mm, moč: 18,39 kW (25,00 KM), delovna dolžina: 1.500 mm, Oprema: dokumentacija / priročnik, nujno zaustavitev, FACCIN HAV 15342 Variable 3-Roller Plate Bending Machine Electronically controlled, hydraulic 3-roller plate bending machine Technical Data: Number of rollers: three Side roller geometry: variable Working width: 1,550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressing force against top roller: 160 tons Working pressure at rated capacity: 250 bar Guaranteed installed power: 18 kW (25 HP) Guaranteed max. rotation speed: 3.5–7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed Performance: for material with yield strength 260 N/mm² Rolling capacity (full working width): 38 mm Pre-bending capacity (full working width): 20 mm from pipe diameter: 1,600 mm Rolling capacity (full working width): 30 mm Pre-bending capacity (full working width): 17 mm from pipe diameter: 415 mm Standard Equipment: Variable geometry with linear guides for roller movement Kjdpfot Akt Rex Ag Tsdr Extra-long swing arm bearing for increased frame stability Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel High-tech hydraulics and electrics package Simultaneous rotation and roller movement Safety emergency cable with emergency stop and CE certification Centralized lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 200713, skupna širina: 950 mm, skupna dolžina: 1.050 mm, skupna višina: 890 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, skupna masa: 585 kg, kapaciteta rezervoarja za olje: 13 l, največja hitrost vrtenja: 6 obr/min, Električni upogibni stroj P54 Evo Upogibni stroj za armaturne palice iz betona, zasnovan za visoke produkcijske količine. Kapaciteta upogibanja: - 1 palica Ø44 mm / trdnost 65 kg/mm² - 1 palica Ø40 mm / trdnost 85 kg/mm² Motor: 4 kW (5,5 KM), napajanje 400 V (trifazno) Dimenzije: 105 x 95 x v. 89 cm Neto masa: 585 kg Pogon: električni Obdelovan izdelek: armaturna jekla za beton Premikanje: vodoravno Kapaciteta upogibanja: min: 2 mm; max: 44 mm Št. obratov: 6 Priloženo: - Dve povratni palični zatiči, ki se postavita na obod plošče za določanje kota upogibanja - Komplet inbus ključev za redno vzdrževanje - Električna nožna pedala, ki olajša delo operaterju in omogoča delo z vseh strani stroja - Komplet koles za prestavljanje stroja - Industrijski vtikač, ki zagotavlja električno povezavo - Dva gobasta stikala za zaustavitev v sili, nameščena na dveh nasprotnih straneh stroja - Podaljšana sedla z do 10 luknjami, standardno nameščena na vseh Evo upogibnih strojih za armaturo – nujna za izdelavo dvojnega upogiba Cena: 3.660 EUR + DDV, po dogovoru, EXW Oradea, Romunija. Prosim za ponudbo. Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Kdsdpfjzgv Hdjx Ag Tor

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, Max. rolling capacity (cold forming): mm 32 Max. bending capacity (cold forming): mm 24 For pipe diameter: mm 2050 For material with yield strength: N/mm² 260 Usable length: mm 3050 Number of rollers: four Kdedpfxof T Rzfs Ag Tsr Top roller diameter: mm 410 Bottom roller diameter: mm 390 Driven rollers: two Rotation speed: 5 m/min Rolling speed: hydraulic Installed power: 30 HP Voltage: 400V, 50Hz, 3Ph Includes: - Hardened & polished rollers - Cone bending device - Electronic roller parallelism - Siemens PLC control - CE marking with corresponding drive brake - Mobile control panel

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, TECHNICAL DATA: Number of rollers FOUR Geometry Linear guides Maximum sheet width mm 3000 Top roller diameter mm 390 Bottom roller diameter mm 370 Side roller diameter mm 295 Installed power HP 40 Infinitely variable rotational speed m/min 4-8 Kjdpfsgd T R Dox Ag Todr Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield strength 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Pre-bending capacity (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Pre-bending capacity (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting adjustment

Stanje: novo, Širina pločevine: 1250 mm Debelina pločevine: 5,5 mm Upogibna zmogljivost: 5,0 mm Dolžina valjev: 1280 mm Najmanjši premer: 210 mm Premer zgornjega valja: 140 mm Kdodeyvvpyopfx Ag Tor Teža: 1365 kg Dimenzije (D-Š-V): 2.020 x 900 x 1.200 mm Standardna oprema: - Centralni valji gnani z električnim motorjem, cirkulacijski reduktor in zobniški pogon - Stransko izmetljiv zgornji valj - Glavni motor z zavornim sistemom - Naprava za konično upogibanje - Mobilna nadzorna plošča in nožni pedal - CE znak/Izjava o skladnosti Posebna oprema: - Motorizirano nastavitev zadnjega valja - Digitalni prikaz za zadnji valj - Indukcijsko kaljeni valji

Stanje: rabljeno, Leto izdelave: 1984, roll bar yes positioning automation yes documentation yes operating manual yes Kedpfx Aox U A Sfeg Tjdr

Leto izdelave: 2020, stanje: kot nova (razstavni stroj), Roll bending machine with spindle adjustment and 3 driven rolls Features: Shaft diameter: 40 mm Working position: Horizontal/vertical with support Connection: 230V/single phase with inverter Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Kdedpfsgi N Alex Ag Tsr Square tube: 50 x 50 x 3 mm Round bar: 35 mm Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Scope of delivery: CE40M3D Universal roller set for profiles Accessories (including control desk with foot switch, operating manual) 1 set of plastic rollers for 1 1/2" round tube, for low-marking operation

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 250 h, številka stroja/vozila: 0131, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, Premer cevi (maks.): 48 mm, Dolžina cevi (maks.): 3.000 mm, Debelina stene cevi (maks.): 4 mm, Kot upogiba (maks.): 180 °, skupna masa: 670 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 1, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, T U B O M A T – simply smart. TUB-C G3001 The pipe bending machine is ideally suited for single part and small batch production. Using the software, individual pipes can be parameterized, simulated, and saved. The bending data is then transmitted to the machine via a network (LAN). Basic Bending Equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-level bending angle preselection or program operation - 80 memory locations for up to 10 sets - Set/actual value display for bending angle - Compact, forward-positioned bending head - Optimized tool concept - Hydraulic bending drive, operated with a proven hand lever - Hydraulic pipe clamping - Hydraulic pressure die adjustment - Hydraulic mandrel extractor - Mobile machine design - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal basic drive unit for mounting attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+10° overbending) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection specs: 400 V / 50 Hz / 3-phase - Power plug: CEE 16 A - Colours: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic Package Pipe Bending Software - Oracle Express database for single-user application - Creation of isometrics (single tubes) - ConCSVImp – Interface for CSV format import - Calculation of bending data considering springback, elongation, and rebound - Verification of clamping lengths and start/finish lengths - Output of bending data (printout) - BendSim – Bending simulation and graphical display via parametric tool design - BendCon – Creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 adapter set for bending rollers with 25 mm mounting bore 1 clamp adapter assembly space 100 mm 1 support for fixed pressure die assembly space 100 mm Bending Tools Bending tools consisting of bending roller, clamping block, and fixed pressure die Tube Ø / Bending Radius - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel pipes Design with lubricant channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Kedpjx E Rdwefx Ag Todr Pre-assembly fittings for cutting ring connectors (L=light, S=heavy duty) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counterhold plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses available. The machine is used but in like-new condition. The machine can be inspected and demonstrated by arrangement. The machine must be collected from us, but we can assist with loading. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors excepted.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2007, I - jeklo - ploščato 50 x 10 mm I-jeklo - postavljeno navpično 80 x 15 mm Kotno jeklo 50 mm Okrogla palica 30,0 mm Premer cevi, največ 1 1/2" mm Polna palica - premer 30,0 mm Teža 185 kg Dimenzije D-Š-V 670 x 530 x 1350 mm Kvadratna palica 40 x 40 x 3 mm Cevi 60 x 2,0 mm Debelina čepa 30 mm Kedpfet U R H Uex Ag Todr Skupna potrebna moč 0,75 kW Predstavitveni model Oprema: - Osnova stroja - Nožni stikalo - Standardni valji (razdeljeni) - Možnost horizontalnega in vertikalnega upogibanja

Stanje: novo, Leto izdelave: 2025, The manufacturing of modern folding machines is our passion, which we would like to share with you. At trade fairs, we share our expertise and focus on our bending machines, thanks to which we constantly improve our folding machines—and always remember whom we really work for. The quality of our folding machines is extremely important to us. Model: ZGR-4140/0.7mm Technical Data: - Maximum working width: 4140 mm - Bending capacity: up to 0.7 mm (steel sheet) - Bending angle: max. 145 degrees - Clamping beam thickness: 20 mm - Cut with the rotary shear along the entire working width - Upper beam lift with three-position adjustment - Throat depth: 80 mm Kedpfx Agocpm E Te Tsdr - Degree scale - Angle stop - Depth stops - Weight: approx. 700 kg - Rotary shear (max. cutting capacity up to 0.8 mm / steel sheet) available at an additional cost of 350 euros - The machine meets CE directives and comes with a 12-month warranty. Delivery cost: 500.00 euros Short delivery times! Order today—delivery next week! Cash payment upon delivery! No risk!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, Obseg premera žice: 2,0 - 6,0 mm Dovodna dolžina: neomejeno Kdodjy Ehpwjpfx Ag Tsr Komplet z motoriziranim kolutom za žico WAFIOS H 3 Premer koluta: 1.600 mm Nosilnost: 1.500 kg.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 20 t, TEHNIČNI PODATKI Kapaciteta stroja: 200 kN (20 t) Tlak zraka: 5 bar Pretok zraka: 250 Nl/min Kapaciteta olja: 160 l Hitrost revolverske glave: 25 vrt/min Kdsdpfxey Symuo Ag Tsr Delovni hodi: Delovni hod stroja brez premikanja: 1.250 mm x 2.100 mm Obdelava Maks. debelina pločevine z mizo z krogličnimi ležaji: 6 mm Maks. debelina pločevine s krtačno mizo: 3 mm Maks. teža na mizo: 100 kg Natančnost Natančnost izseka (v standardnem načinu): ±0,1 mm Natančnost pozicioniranja (ponovljivost): ±0,07 mm Zmogljivost Udari na minuto, pomik 25,4 mm: X320 / Y250 Nibbling cikel, pomik 1 mm: X920 / Y920 Orodja Minimalni programabilni korak: 0,01 mm Število orodij: 31 Maks. premer orodja: 88,9 mm Dimenzije (D x Š x V): 4.890 x 4.370 x 2.137 mm Teža stroja: 11.500 kg Opomba: Orodja niso vključena, potreben je poseben prevoz.

Stanje: novo, Leto izdelave: 2026, Pipe bending machine ZOPF - Model R 1 - without tooling - incl. foot pedal with emergency stop control - without tools - programmable control unit - 100 programs, each with 9 bends - C-axis display and control - manual and automatic bending modes possible - bending angle and springback are programmable - quick tool change via plug-in system Ksdpfx Aefiqntog Tsdr - scale for counterholder integrated into the table - mobile with pallet truck - dimensions 930x410x1000 mm - weight 230 kg - motor 1.5 kW - 220 Volt AC - bending radius from R55 - R340 mm - bending capacity for tubes Ø 5 mm to 50 mm - max. bending angle 210°

Stanje: zelo dobro (rabljeno), Naprave, vidne na fotografijah, so robustne ročne vzvodne preše znamke ASTOR, model 52M. Ta tip preše se uporablja za kovičenje, spenjanje, vstavljanje netov, gumbov, pritiskačev ter druge montažne operacije pri izdelavi usnjenih, galanterijskih, obutvenih in tekstilnih izdelkov. Opis Proizvajalec: ASTOR Model: 52M Količina: 2 kosa Ročni pogon z vzvodom Masivna litoželezna konstrukcija Možnost namestitve različnih delovnih orodij Stabilno podnožje za pritrditev na mizo Kdsdpfx Agszgtz Se Tor Preprosta in zanesljiva konstrukcija Idealno za galanterijske, obutvene in tapetniške delavnice

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, Razpon premera žice: 2,0 - 10,0 mm Dovodna dolžina: neomejena CNC osi: 5 Kot upogiba: 0,1 - 240° Dolžina povratka: maks. 600 mm Teža: 2.400 kg z enoto za posnemanje robov popolnoma z motoriziranim odvijalnikom žice Premer odvijalnika: 1.500 mm Nosilnost: 1.500 kg Kdedsy Ehrfjpfx Ag Ter