Presona Ab Balairka nakup rabljenega (11.881)

Stanje: rabljeno, prevoženi kilometri: 446.000 km, moč: 330 kW (448,67 KM), prva registracija: 03/2014, vrsta goriva: dizel, skupna masa: 32.000 kg, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 6, Oprema: filter saj, Arocs 3245 8x4 Hiab 26T (od DE TÜV...----- Retarder- Klima- Vlečna kljuka- Hiab 26T Vzmetenje: listnate vzmeti Fpedpeyxkc Hefx Aplsg

Stanje: dober (rabljeno), Balinirke, Schleicher, 16 S – rabljena - : Cena iz skladišča: samo 1.950 € (neto) Fsdpfx Aeyzcwhspljpg Proizvajalec: Schleicher Tip: 16 S Številka: 6150I1730E Leto izdelave: 20 Dimenzije: V: 2000 mm / Š: 1500 mm / G: 900 mm Teža: 1.850 kg 380V, 3 faze, 10,3 A, 4 kW Stanje: dobro Na voljo: takoj Lokacija: Husum Navodila za uporabo niso na voljo

Stanje: dober (rabljeno), Leto izdelave: 2008, stiskalna sila: 30 t, Balirne stiskalnice, Bramidan, 4-x 30 SLD, 30 t pritisne sile – rabljeno - : Cena na lokaciji: samo 3.950.-€ (neto) Proizvajalec: Bramidan Tip: 4-x 30 SLD Številka: PEY297206-3 Leto izdelave: 2008 Dimenzije (V x Š x G): 2300mm / 1800mm / 1500mm Teža: 1.850kg Napajanje: 3x230/400V, 25/16 A, 4kW Stanje: dobro (trak na fotografiji je samo zato, da se stiskalnica ne uporablja več, saj je bila kupljena nova, večja) Na voljo: takoj Lokacija: Husum Fodpfx Apeyzcvwjljpg Navodila za uporabo so priložena.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 12 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630207349, HSM V-Press 825 Plus Pro – skoraj nerabljena, stisnjenih le 16 bal Na prodaj je balirni stroj HSM V-Press 825 Plus Pro v izjemno malo rabljeni kondiciji. Fpjdpfxsyy Ddaj Apljg Stroj je skupaj izdelal le 16 bal, zato je praktično kot nov. Idealno za podjetja, ki iščejo visokokakovosten balirni stroj brez plačevanja cene nove naprave.

Stanje: rabljeno, Skupne dimenzije: 2800x2570x2000 mm Fpedpeyibhkefx Aplsg

Stanje: rabljeno, skupna dolžina: 1.220 mm, skupna širina: 400 mm, skupna višina: 2.000 mm, nosilnost na odsek shranjevanja: 150 kg, We offer used shelving units here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new goods) Shelf surface: 1,220 x 400 mm (used goods) Compartment load: 150 kg Number of levels: 5 pcs. Boltless assembly Cross brace Tiered net prices per unit plus VAT: Starter bays: 1 - 5 bays: €69.50 net per unit 6 - 20 bays: €66.03 net per unit 21 - 50 bays: €62.55 net per unit from 51 bays: €59.08 net per unit Add-on bays: 1 - 5 bays: €47.50 net per unit 6 - 20 bays: €45.13 net per unit 21 - 50 bays: €42.75 net per unit from 51 bays: €40.38 net per unit PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transportation and on-site assembly of the units. Fedpfxoy Dggls Aplspg TERMS OF PAYMENT Payment terms to be agreed upon in the event of an order. The stated price is the unit price/net price, as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine systems, textile warehouses, as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, feel free to contact us. Four wins – The four success factors from DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 1.220 mm, skupna širina: 400 mm, skupna višina: 2.200 mm, nosilnost na odsek shranjevanja: 150 kg, We are offering used boltless shelving units here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf: 1,220 x 400 mm (used) Shelf load capacity: 150 kg Number of levels: 6 pcs Boltless assembly Cross brace Tiered net prices per unit plus VAT: Starter bays: 1 - 5 bays: €79.20 net per unit 6 - 20 bays: €75.24 net per unit 21 - 50 bays: €71.28 net per unit from 51 bays: €67.32 net per unit Extension bays: 1 - 5 bays: €55.00 net per unit 6 - 20 bays: €52.25 net per unit 21 - 50 bays: €49.50 net per unit Fpodey Dgf Ispfx Apleg from 51 bays: €46.75 net per unit PROJECT PLANNING Our sales team will gladly provide you with a non-binding quotation tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The prices are stated per unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer a wide range of attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. "Connect Four" – The four pillars of success from DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Stanje: rabljeno, Leto izdelave: 2012, stiskalna sila: 40 t, Proizvajalec: HSM Tip: HL 4010 Li Leto izdelave: 2012 Tlačna sila: 40 t Fpjdpfx Apjx H R U Sslog

Stanje: rabljeno, Contact Bart Hoogakker for further information. Fpsdpfxjw Ei N Ss Aplsg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, Technical data: Fpodpfx Apeygud Aslog Press force: 1,000 kN Specific press force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency controlled Voltage/Frequency: 400 V / 50 Hz Cycle time (idle): 8.3 s Idle capacity (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Maximum bale weight: 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with associated shaft covers - 1 support structure and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500 kg soft wire coils - 10 wire reel trolleys - 1 multi-control system for the baler - Full set of design documentation and maintenance history - Maintained and serviced by the manufacturer Commissioning upon request. Weight: 33,000 kg Binding type: Wire Processable materials: Plastic film, mixed paper, cardboard, hollow containers made of HDPE/LDPE, and plastic bottles The system is operational and can be inspected while running. The machine will be dismantled on 16.02. and can be inspected at our premises thereafter. Available immediately!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying (9-fold binding). The baler is in good technical condition and was only used sporadically. PRESS DIMENSIONS -Total length: 9700 mm -Total width: 3700 mm -Transport width: 2300 mm -Height incl. feed hopper: 3640 mm -Total weight approx.: 24t -Floor pressure: approx. 5kg/sqcm -Heaviest machine component weighs approx. 6 tons FEED HOPPER OPENING -Length: 1600 mm -Width: 1200 mm -Inspection door (glass) PRESS CHAMBER -Stroke length of ram: 2600 mm -W x H: 1100 x 770 mm -Volume: 2.2 cbm -The ram runs on heavy-duty rollers and features knives for cutting residual material. -Compacting pressure in the press chamber (channel) is provided by two side cylinders and a simple lever system, allowing for uniform and wide-area force distribution. HYDRAULIC SYSTEM -Electric motor Siemens 4-pole 400V-50Hz 30 kW -Hydraulic pump (Bucher) continuous/peak: 320 / 400 bar -Maximum working pressure: 290 bar -Denison hydraulic valves 24 VDC -Pressure monitoring with proportional valve cycle -Automatic oil temperature monitoring -Automatic oil filter monitoring -Automatic oil level monitoring -Oil volume: 600L -Pressing force max.: 740kN / 74t Fsdpfx Aey Ayiqsplepg -Specific pressure: 87 N/sqcm SYSTEM THROUGHPUT -Volume per pressing operation, incl. pre-compaction: 1.76 cbm -Average duration per press cycle: approx. 40+8 sec -Cycle time without material: 22+8 sec -Tying time: 30 sec -Theoretical volume without tying: 1.84 m3/h -Average operating volume: 123 m3/h -Capacity with material density 30 kg/m3: 3-4 t/h BALES -Bale length: 500 - 2000 mm -Bale width: 1100 mm -Bale height: 770 mm

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture: 1977 Drilling capacity: 32 mm Spindle taper: MK 3 - short quill Distance spindle nose - table: 545 mm (short quill) Distance spindle adapter - table: 395 mm (with MK adapter) Throat depth: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 - 1450 rpm, stepless Motor power: 1 / 1.6 kW Electrical connection: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator - Intermediate stage for high torque at low speeds - MK adapter from MK3 to MK4 - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Rotating drill table - Table height adjustment via hand crank Fpedjharwvepfx Apljg - Heavy-duty machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space requirement (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Stanje: novo, Leto izdelave: 2026, - Thread cutting device - Control panel with OLED display - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Power cable with Schuko plug Fjdpefx U D Asfx Apljpg TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Throat depth: 220 mm - Column diameter: 70 mm - Spindle to table distance: 140 – 315 mm - Drill head height adjustment: manual - Speed display: digital - Drilling depth display: digital - Feed (mm/rev): manual - Infinitely variable spindle speeds: 60 – 6,000 rpm - Continuous/standard drilling capacity: 10/12 mm - Tapping capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single-shift) - OPTION Drill Package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and quick-action drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST A QUOTE!

Stanje: rabljeno, 1 rabljeni stebrni vrtalni stroj Proizvajalec: Alzmetall Tip: AB 3 ESV Vrtalna zmogljivost: Ø 32 mm 3 samodejni pomiki za vrtanje Vpenjalni stožec vretena: MK 3 Razdalja vretena do mize: 545 mm Iztek: 290 mm Hod pinole: 160 mm Premer stebra: Ø 220 mm Dimenzije: 1150 x 650 x 2000 mm Teža: 850 kg Fedpsyqr Dhefx Aplspg

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 40.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 88 t, širina odprtine za polnjenje: 990 mm, dolžina polnilne odprtine: 1.800 mm, dolžina bale: 1.200 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 23.000 kg, kapaciteta rezervoarja za olje: 2.000 l, moč: 90 kW (122,37 KM), volumenski pretok: 643 m³/h, Good day, We hereby offer, without obligation, a used baling press including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we do not assume any liability for accuracy or completeness. Fodeymmtcepfx Apljpg Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours (as of July 2025) Main press force: 880 kN Specific pressing force: 107 N/cm² Feed opening dimensions: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions including conveyor system: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compacting paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger press in May/June 2026. Until then, the machine can be viewed in operation with material feed. We would be pleased if this press is of interest to you. Your service team, Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 2012, Preddrobljenec ni del ponudbe (zgornji del). Ponujen je le spodnji del. Papirna balirka / balirni stroj PRESTO CC 40 V Proizvajalec: PRESTO GmbH & Co. KG Tip stroja: CC 40 V Serijska številka: 28074 Leto izdelave: 2012 Lastna teža: 4200 kg Maks. obratovalni tlak: 260 bar Zaščitni razred: IP55 Nazivni tok: 30 A Nazivna napetost: 400 V, 50 Hz Nazivna moč: 15 kW Električni priključek: 35 A gG Fsdpfx Apoyrt T Tjlepg Tip stroja: horizontalna balirka za papir in karton.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Available from June 2026 Baling Press Presto HPK 50 BS, year of manufacture 2011, with wirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (LxW) Channel cross-section: 700 x 1100 mm Max. feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/m³: 6 t/h 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Fpsdpfx Apeyub Drolsg Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Infeed length: approx. 3000 mm Rising section: approx. 5000 mm Gooseneck: approx. 1000 mm The press is still in operation and can be inspected under working conditions. It will be available from the beginning of June 2026. Please note: All technical data is based on manufacturer’s specifications. We accept no liability for the accuracy of the provided information or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections can be arranged by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Stanje: rabljeno, Model: Balirni stroj HSM V-press 1160 plus Pritisna sila (kN): 59 Učinkovitost (bale/uro): 1-2 Maks. dimenzija bale (mm): 1200x1100x1000-1200 Dimenzije (D x Š x V) (mm): 1780x1150x2985 Fjdpfx Aov Al Tispljpg Moč (kW): 4 kW Teža (kg): 2300 Leto izdelave: 2018-2019

Stanje: novo, Leto izdelave: 2026, Saw blade width max. 120 mm Weight 350 kg Motor power 1.3 kW WINTER AUTOMATIC BANDSAW SHARPENING MACHINE BANDSAWMAX 120 PNK-AB The PNK-AB has been specially developed for grinding the teeth of various bandsaw blades of different shapes, widths, and thicknesses. The compact and robust grinding unit, which moves on linear guides within the PNK-AB, ensures precise and stable grinding. Technical specifications: - Bandsaw blade width: 15–120 mm - Tooth pitch: max. 60 mm - Tooth depth: 0–30 mm - Tooth forms: PV, NV, KV, PU, NU - Rake angle: -10° to +30° - Feed speed: 0–90 teeth/min - Number of motors: 2 - Grinding wheel motor: 1.1 kW, 1400 rpm - Gear motor: two speeds - 0.55 kW, 1400 rpm - Grinding wheel diameter Ø 250 mm - Grinding wheel bore Ø 20 mm - Grinding wheel thickness 8 mm/10 mm/13 mm (depending on tooth pitch) - Operating voltage 400 V, 3-phase, 50–60 Hz - Total power approx. 1.3 kW - Dimensions 80 × 120 × 175 cm - Net weight / gross weight 350/375 kg PNK-AB Main Features: - Automatic grinding of bandsaw blades up to 120 mm wide - Grinding wheel runs on linear guides - Corrosion-resistant and hardened coating of all mechanical components - On/off switch - Maximum tooth pitch 60 mm - Easy operation - Minimal space requirement - Fast and precise grinding of NV, PV, and KV tooth profiles - Manual central lubrication - Manual saw clamping and blade lifting device - Optional grinding attachments for circular saws (HSS) and bandsaws - Manufactured according to CE standards Capacity: Up to 30 bandsaw blades grindable per day Optional accessories: - CBN Woodmizer grinding wheel (net price 375 EUR) - Diamond grinding wheel for bimetal (net price 520 EUR) - Bakelite grinding wheel (13 mm, net price 75 EUR) - Ceramic grinding wheel (16 mm, net price 115 EUR) - CBN grinding wheel (net price 1,125 EUR) - Replacement indicator finger (net price 70 EUR) - Indicator finger pin (net price 20 EUR) - Dressing device (net price 1,170 EUR) - Diamond dressing wheel (net price 100 EUR) - Grinding device for circular saws (HSS, net price 960 EUR) - Grinding device for frame saws (net price 2,700 EUR/meter) - Unwinding and rewinding system for bandsaw manufacturers (net price 5,800 EUR) Fpodpfx Aeyk Ib Ajplsg - Sealed packaging (net price) 570 EUR - Attachment for double-sided saws net price 1,560 EUR - Pneumatic system for second indicator finger net price 1,140 EUR - CAM for GD tooth profile saw blades (WM) net price 330 EUR

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Torzijsko toga portalska konstrukcija za natančnost in dolgo življenjsko dobo – Sprostitev stopala – Višina zlaganja 60 mm – Globina vstavljanja cca 100 mm za svedri – Širina vstavljanja 480 mm Fpsdpfx Apsyx Axasleg – Kompenzacija dolžine svedra – Premer luknje 2 – 20 mm – 1 do 4 vrtalne glave – Samodejni dvig mize

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 630213235, La machine est dans un état comme neuf ! Les données techniques proviennent du fabricant. Le vendeur ne peut en garantir l'exactitude ! DÉTAILS TECHNIQUES Force de pressage : 594 kN / 60 t Fodpfxsyqw Sqe Aplepg Force de pressage spécifique : 45 N/cm² Temps de cycle (à vide) : 25 s Capacité théorique (à vide) : 32,5 m³/h Hauteur de remplissage : 1 115 mm Dimensions de l’ouverture de remplissage : 1 195 x 650 mm Dimensions des balles : 1 200 x 1 200 x 1 100 mm Poids maximal des balles : 550 kg Matériaux traités : film, papiers mixtes, carton, chutes de découpe DÉTAILS DE LA MACHINE Puissance d’entraînement : 4 kW Tension : 400 V Fréquence : 50 Hz Type de porte : porte coulissante Verrouillage de porte : hydraulique Type d’alimentation : manuelle Consommables : fil, fil à boucle Dimensions & poids Dimensions (L x l x H) : 1 780 x 1 568 x 2 985 mm Poids de la machine : 2 450 kg ÉQUIPEMENTS HSM TCS (TorsionControlSystem) pour la surveillance de l’inclinaison de la plaque de compression Démarrage automatique du cycle de pressage

Stanje: novo, Leto izdelave: 2026, - Infinitely variable speed control - Rapidly adjustable drilling depth stop - Thread cutting device - Undervoltage release - Rack-and-pinion table height adjustment - LED head lighting - Continuous/normal drilling capacity: 20/23 mm - Maximum thread cutting capacity: M 12x1 - Spindle: MT II - Drilling depth: 100 mm - Throat depth: 260 mm - Column diameter: 110 mm - Usable table surface (W x L): 420 x 340 mm - T-slot size (arm): Number 2, spacing 125 mm - Digital speed display - Digital drilling depth display - Rapidly adjustable drilling depth stop - Manual feed - Three-phase motor 400 V - Stepless spindle speeds 30 - 3,000 rpm Option Drilling Package 3 consisting of: - Machine vice [felix] 2.0, 100 mm - Quick-release drill chuck 3-16 mm (accuracy 0.17 mm) - Taper arbor MT 2 B18 and reducer sleeve MT 2 to MT 1 € 485.00 Option: Coolant system: € 605.00 FACTORY WARRANTY: 3 years DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! Fsdpfx Aod Nk S Ijpljpg REQUEST A QUOTE!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 386, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.110 mm, dolžina polnilne odprtine: 1.050 mm, širina bale: 1.050 mm, višina bale: 730 mm, teža bale: 425 kg, skupna širina: 2.100 mm, skupna višina: 3.100 mm, skupna dolžina: 5.000 mm, skupna masa: 6.800 kg, transportna višina: 2.400 mm, moč: 22 kW (29,91 KM), Stiskalnica je bila zamenjana z večjo. Do demontaže je bila normalno v uporabi. Funkcija je bila popolnoma zagotovljena. Stiskalnica stoji na naslovu 09212 Limbach-Oberfrohna, Chemnitzer Str. 96. Fpedpfx Aoypb Awoplsg

Stanje: novo, Leto izdelave: 2026, Thread cutting device Clearance cutting device Programmable drilling depth stop Digital drilling depth and speed display Thread cutting device M30 (pitch-dependent) Option R1: Continuously variable spindle speeds with intermediate gear, speed range 100–2000 rpm Option R2: Continuously variable spindle speeds with intermediate gear, speed range 70–1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Arm reach 300 mm Usable table surface (swivelable) 590 x 450 mm Feed rate 0–300 mm/min, stepless Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor, three-phase 400 V, pole-changeable, 1.5/3.0 kW Weight 420 kg Option Drilling Package No. 6: Taper arbor B18/MK4, quick-release drill chuck B18/3–16 mm, machine vice No. 2–140, and T-slot bolts, 910.00 EUR Option: Automatic spindle stop when drill spindle is at the top, 432.00 EUR Fpodpfx Aed H Rh Repleg Option: Chip break module 432.00 EUR Delivery: Free to door incl. packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE OFFER OTHER FLOTT PRODUCTS—ASK FOR AN OFFER! Your FLOTT Authorized Partner

Stanje: novo, Leto izdelave: 2026, Continuous/Standard Drilling Capacity: 18/20 mm Thread Cutting Capacity: M12 (depending on pitch) Spindle: Morse Taper II Drilling Depth: 100 mm Throat Depth: 240 mm Column Diameter: 82 mm Usable Work Surface (W x L): 340 x 280 mm T-slot Size (Arm), Spacing (mm), Width (mm) Number: 2, 125, 13/26 Speed Display: Digital Drilling Depth Display: Digital Drill Depth Stop: Quick-adjust stop ring Manual Feed Rack-and-pinion Table Height Adjustment Motor: Three-phase, frequency-controlled, 230 V, 0.75 kW Spindle Speeds Infinitely Variable: 30 – 3000 rpm Table Working Height: 155 - 415 mm Base Working Height: 155 – 550 mm Machine Dimensions: 355 x 705 x 1,825 mm Weight: 195 kg Optional Accessories Drilling Package 3 consisting of: - [felix] 2.0 100 mm machine vice - Keyless drill chuck 3-16 mm (accuracy 0.17 mm), - Taper arbor MK 2 B18 and reducing sleeve MK 2 to MK 1 Fpodpfx Apovu Tmnjlsg €485.00 D0Ezfi Factory Warranty: 3 years Free delivery including packaging (Germany only) Delivery time: ex stock, immediate NOT THE RIGHT MACHINE? WE ARE A FLOTT AUTHORIZED PARTNER AND CAN OFFER YOU EVERY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!