Balairka

ANIS ATS 110-75S-9CT-30kW

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced Bdodpfx Akevf E Averec - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 37.656 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 85 t, širina odprtine za polnjenje: 1.500 mm, dolžina polnilne odprtine: 1.100 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 650 kg, skupna masa: 25.000 kg, kapaciteta rezervoarja za olje: 1.000 l, leto zadnje generalne obnove: 2024, volumenski pretok: 410 m³/h, transportna širina: 2.400 mm, transportna dolžina: 9.300 mm, Good day, We hereby offer you, without obligation, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot assume any liability for the accuracy and completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press door force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Bedpev T I Evofx Akredc Hydraulic oil tank capacity: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight press: approx. 25 t Note: This machine was used in a recycling facility for compacting paper, cardboard, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have already been replaced in the last 3 years. The machine has been serviced regularly. We would be pleased if this press is of interest to you. Your Service Team, Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Avtomatska kanalna stiskalnica BOA Continu 25 LB + tračni transporter. Stiskalnica je v dobrem stanju, redno servisirana. Nedavno je bila opravljena popolna obnova Denison črpalke. Popolnoma delujoča in v stalni uporabi. Vabljeni k stiku z nami. Bdsdpfx Ajw S Tv Uekrjc

Stanje: rabljeno, Leto izdelave: 2024, barva: zelen, lastna masa: 4 kg, prva registracija: 06/2024, vrsta goriva: bencin, vrsta prenosa: mehanski, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE IN HARDOX, REAR OPENING WITH TWO SIDE-HINGED DOORS + MEC CRANE WITH PANTOGRAPH OUTRIGGERS AND 6-TINE MECHANICAL GRAPPLE WITH ROTOR REF: 24-U-103 TYPE: Bulky waste with crane NEW: No LID: No OPENING: Rear with two side-hinged doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.90 m CONTAINER LENGTH: 4.70 m + 1.00 m crane area + 0.20 m beams EXTERNAL CONTAINER WIDTH: 2.50 m INTERNAL / EXTERNAL CONTAINER HEIGHT: 2.30 m / 2.50 m CAPACITY: 25 m³ WEIGHT: 6,020 kg FLOOR THICKNESS: 5 mm WALL THICKNESS: 4 mm COLOUR: Green CRANE DATA Bdodjv Hiciepfx Akroc MAKE: MEC F1211.S2 SERIAL NUMBER: 50579088 EXTENSIONS: 2 Displayed prices do not include VAT. Please contact our sales staff for an updated quote and conditions. For more information: Loris: +39-3484773001 URL: #thespecialistsinrolloffequipment AURORA ROLL-OFFS operates in the sale and purchase of industrial and commercial vehicles, specialising mainly in the waste sector. Specialists in trucks, trailers and roll-off equipment. With an inventory ready for delivery of over 50 trucks and over 150 containers, roll-off bins with and without cranes. E.&O.E. Due to the large number of listings and details entered, Aurora invites you to verify the accuracy of the information provided with our sales personnel.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, - Stroj v zelo dobrem tehničnem in vizualnem stanju - Takoj na voljo - Prodaja vključuje: - Škarje za staro železo: Zato FCE40 ali Genesis GXP400R - Dvigalo - Dodatna priklopna oprema na voljo po dogovoru Bdsdoy Dc Nvepfx Akrec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 8.900 h, številka stroja/vozila: LP50VH2, Used Presona LP50 VH2 baler in good operating condition with conveyor belt Technical Data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Throughput based on material bulk density: * 30 kg/m³ = 7-9 t/h * 50 kg/m³ = 8-9 t/h * 100 kg/m³ = 11-14 t/h - Hopper length: 1500 mm - Hopper width: 1100 mm - Feed chamber volume: 2.7 m³ - Bale width: 1100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400-550 kg - Number of vertical tying wires: 5 pcs. - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Hydraulic tank capacity: 600 l - Motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: * Conveyor width: approx. 1300 mm * Length of horizontal section: 5,500 mm * Length of inclined section: approx. 10,800 mm Bdjdeyrhi Nspfx Akrsc * Conveyor weight: approx. 6 t Scope of delivery: - Baler, control cabinet, operator panel, conveyor belt for sale. The documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete. Viewing available by appointment. We assume no liability for technical information or possible errors. Video material can be provided upon request.

Stanje: rabljeno, Leto izdelave: 2024, barva: sivo-črna, lastna masa: 4 kg, vrsta goriva: bencin, vrsta prenosa: mehanski, TITLE: NEW OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE IN HARDOX WITH REAR OPENING AND DOUBLE HINGED DOORS, 180 MM BEAMS WITH L-SHAPED CORNER REINFORCEMENT PLUS NEW MARCHESI M6Z 02.73 CRANE AND 4-TINE GRAB REF: 24-N-25 TYPE: bulky waste NEW: yes LID: no OPENING: rear with two hinged doors DIMENSIONS Bodpfovucn Ujx Akredc TOTAL EXTERNAL LENGTH: 5.20 m EXTERNAL BOX WIDTH: 2.55 m INTERNAL/EXTERNAL SIDE HEIGHT: 2.00 m / 2.20 m CAPACITY: 20 m³ WEIGHT: 4,930 kg FLOOR: 4 mm SIDE WALL: 3 mm COLOUR: grey RAL 7000 CRANE DATA MAKE: MARCHESI M6Z 02.73 SERIAL NUMBER: 0029-23 YEAR: 2023 LENGTH: up to 7.30 m maximum extension EXTENSIONS: 2 LIFTING CAPACITY: up to 750 kg at maximum outreach The prices shown do not include VAT. Please contact our sales department for an updated price comparison and terms. For further information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specialising mainly in the waste sector. Experts in trucks, trailers and roll-off equipment. With an ready-to-deliver fleet of over 50 trucks and more than 150 skip containers and roll-off containers, with or without cranes. E.&O.E. Given the large number of listings and details provided, Aurora invites you to verify the accuracy of the published information with the sales staff.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Twistomat (knotter) motor – 1.5 kW (SEW) Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Baler dimensions – length 11,765 mm; Bdsdoxcir Eepfx Akrsc width 2,500 mm; height 7,104 mm.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 4.450 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 19.000 kg, moč: 257,42 kW (349,99 KM), vrsta goriva: dizel, barva: rdeča, število rezil: 5, proizvajalec motorjev: CAT, model motorja: CAT C9, Področje uporabe: star les in svež les, hišne in kosovne odpadke, elektronski odpad Vretenca s 7/7 koluti s po 5 noži na kolut Prelomna prečka s glavnikom Stabilen kaveljasti okvir Bodpfxjy Akb Rs Akrodc Os s vlečno drogo Permanentni nadpasni magnet Radijsko daljinsko upravljanje

Stanje: dober (rabljeno), Leto izdelave: 1996, Balinirni stroj vključno z transportnim trakom, žičnimi koši, razdelilcem Znamka: Bollegraaf Tip: HBC 50A Letnik izdelave: 1996 Lastna teža: 19.000 kg Teža transportnega traku: 6.000 kg Moč motorja: 30 kW Navpično povezovanje Število žic: 5 Bjdpfextmyzjx Akrodc