Optimum C 6246 nakup rabljenega (56.061)

Stanje: rabljeno, Leto izdelave: 2023, Optimum Optiturn TX 5216V – Used Machine. Machine bed made from heavily ribbed cast iron One-piece machine base made from steel High rigidity of the headstock housing thanks to heavily ribbed 25GG cast iron Precisely machined carriage Shafts mounted on needle bearings, all components lubricated in an oil bath Bed guideways hardened and precision ground All electronic controls centrally accessible All feed gearbox gears made of hardened steel Handwheels decoupled and inspected according to EN 23125 Dual-channel safety electronics Switches with life-cycle calculation, tested to EN ISO 13849 Full leadscrew and feed screw cover Fully illuminated work area Service-friendly removable rear panel Hardened and ground face plate spindle ensures exceptional accuracy and durability High material removal rate in rough machining thanks to large cutting capacity Energy chain for gentle cable and hose guidance Lockable chip guard travels with the carriage, featuring integrated position indicator and coolant hose, manually adjustable No change gears required Equipped with safety device against simultaneous operation of threading and feed mechanisms Electronic feed stop for the Z-axis Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete emptying and cleaning as per DIN Electrical position shutoff with quadruple position stop Three-jaw chuck included as standard Quick-change tool post SWH 7-C Tool holder 32 x 130 type D for 25 mm square tools Large spindle bore Dimensions and Weights Length approx. 2925 mm Width/Depth approx. 1195 mm Height approx. 1930 mm Weight approx. 2470 kg Work Area Centre height: 260 mm Centre distance: 1600 mm Swing over bed: 520 mm Swing over cross slide: 324 mm Bed width: 350 mm Speed Range Number of speed ranges: 2 x 3 steps Speed range: 12 – 1800 rpm Electrical Data Output (motor power): 7.5 kW Total connected load: 5.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant System Coolant pump power: 60 W Type of generated data: Usage data Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 72 mm Spindle Spindle mounting: Camlock DIN ISO 702-2 No. 8 Spindle bore/bar pass-through diameter: 80 mm Tool post: SWH 7C Spindle taper: MK 7 Thread Cutting Metric pitch: 0.5 – 15 mm/rev Hfjdpox Hdq Tjfx Alfeg Number of metric pitches: 55 Imperial pitch: 60 – 2 TPI Number of imperial pitches: 55 Diametral pitch: 120 – 4 DP Number of diametral pitches: 55 Module thread pitch: 0.25 – 7.5 mm x π Number of module pitches: 55 Travel Cross slide travel: 170 mm Compound rest travel: 340 mm Carriage travel: 1400 mm Feed Longitudinal feed range: 0.05 – 1.5 mm/rev Number of longitudinal feeds: 55 Flat feed range: 0.025 – 0.75 mm/rev Number of flat feeds: 55

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, CNC – profilirni center Weinig Conturex 2 za rezkanje, vrtanje in žaganje v prečni in vzdolžni obdelavi Tip C 124 Hsdjypb Adjpfx Alfjfg Leto izdelave 2011 Zelo dobro stanje Set orodij Oertli Širina obdelave 40–260 mm Višina obdelave 25–150 mm Vpenjalna miza PowerGrip, dolžina nosilne površine 2 x 2280 mm Dolžina obdelovanca brez dodajalnega cikla 220–2700 mm Dolžina obdelovanca z dodajalnim ciklom 2700–4500 mm Dolžina obdelovanca z večkratnim dodajalnim ciklom 4500–6000 mm

Stanje: novo, Leto izdelave: 2025, Moč: 750 W / 400 V Vrtalna zmogljivost v jeklu: 25 mm Območje vrtljajev: 60 - 3050 min⁻¹ Vpenjalo vretena: MK3 Hod pinole: 95 mm Izteg vretena: 209 mm Hfsdsir Embjpfx Alfeg Velikost mize: 308 mm x 308 mm Hitrovpenjalna glava: 1 - 16 mm Teža: 107 kg

Stanje: novo, Leto izdelave: 2022, Power: 1.1 kW Drilling capacity steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: 120 - 1810 rpm Speed steps: 9 Spindle taper: MT-4 Drilling stroke: 120 mm Spindle reach: 254 mm Table size: 475 mm x 425 mm Hfsdpfx Aegulr Holfeg Drill table tilt/swivel: 45° left / 360° Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 132 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Power output: 0.85 / 1.5 kW Speed range: 300 - 4000 rpm Speed settings: stepless Spindle taper: MK-3 (Morse taper 3) Drilling stroke: approx. 105 mm Spindle reach: 200 mm Hfodpfxjhpmbbj Alfsg Weight: 152 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, RHV-C&V GmbH & Co. KG zapiralec za steklene kozarce tip: LW560 številka: 10172/4184 leto izdelave: 09/2010 Hjdpfoyxgxwjx Alfsfg nerjaveči jekleni trak, širina traku: 120 mm

Stanje: dober (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 550 mm, pomik osi Y: 305 mm, pomik po osi Z: 460 mm, hitro pomikanje X-os: 10.000 m/min, hitri pomik os Y: 10.000 m/min, hitri pomik na osi Z: 10.000 m/min, skupna višina: 2.200 mm, skupna širina: 1.860 mm, skupna dolžina: 2.164 mm, širina mize: 320 mm, dolžina mize: 800 mm, vrsta vhodnega toka: Klimatska naprava, največja hitrost vrtenja: 10.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, obremenitev mize: 300 kg, skupna masa: 2.800 kg, Oprema: dokumentacija / priročnik, Popolnoma delujoč rezkalni stroj z številnimi dodatki in priročnikom. Hodpjw U Rdnofx Alfefg

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 60 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 333840, potovalna razdalja osi X: 450 mm, pomik osi Y: 200 mm, pomik po osi Z: 510 mm, nosilec vretena: MK 3, hod vretena: 120 mm, vrsta vhodnega toka: trifazni, širina mize: 210 mm, vhodna napetost: 400 V, dolžina mize: 750 mm, zmogljivost vrtanja: 32 mm, razdalja od središča mize do nosu vretena: 275 mm, največja hitrost vrtenja: 3.200 obr/min, vrtljajska hitrost (min.): 95 obr/min, hitro pomikanje X-os: 240 m/min, Oprema: dokumentacija / priročnik, Rezkar je popolnoma delujoč in ga je mogoče preizkusiti. Prodaja se opravi zaradi nakupa večjega modela. Na voljo je tehnična dokumentacija. Rezkar ima masivno spodnjo mizo, v kateri je nameščena črpalka za hladilno tekočino. Samodejni pomik mize ima: - Nujni izklop, brez ponovnega zagona Hsdpfx Ajyrib Tolfjfg - Brezstopenjsko regulacijo hitrosti in hitri pomik - Desni/levi tek - Zaščita proti preobremenitvi ter končna stikala - Hitrost: 0–165 min⁻¹ - Hitri pomik: 240 min⁻¹ Trioosni prikaz položaja, razred natančnosti 0,01 mm.

Stanje: novo, Naprodaj robustna, natančna industrijska sklopka priznane japonske znamke C-max / Fuji Seiko Co., Ltd. Model: 51288015900 Datum izdelave: 17.01.2006 Sklopka je namenjena uporabi v CNC strojih, pogonskih sistemih, industrijski avtomatizaciji, vretenih in rotacijskih oseh. Opremljena s štiritočkovno pritrdilno prirobnico in puščno pritrdilno enoto z nastavitvenimi kroglicami. ⸻ Tehnični podatki: • Zunanji premer: 81,03 mm • Premer prirobnice (razmak vijakov): 63,04 mm • Skupna dolžina: 52,96 mm • Notranji premer puše: 31,46 mm • Element z utorom za pritrditev: 50,75 mm Hedpfew Rdvisx Alfofg ⸻ Izdelava iz visokokakovostnega jekla, skladiščeno kot zaloga – zelo dobro ohranjeno, minimalni sledovi skladiščenja. Originalna embalaža proizvajalca z japonsko nalepko. /////Cena za 1 kos./////

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A conveyor system is available for transferring Euro pallets to a warehouse automation system. It is suitable for weighing and barcode scanning of pallets, with optional film wrapping, dimensioning, and output to two discharge positions or, in case of error, to a separate position. The system includes a C&C Group C-ONE EXTREMA pallet wrapper. Suitable pallet dimensions: 1200x800 mm, maximum pallet weight: 1 t. Documentation, control cabinets, and accessories are included. Hfodpfx Alelcdf Djfeg

Leto izdelave: 2017, stanje: pripravljen za uporabo (rabljen), Na voljo je rezkalni stroj OptiMill MF 4V, skoraj nov, z 100 ur delovanja. Leto izdelave 2017. Hodi X/Y/Z: 800mm/320mm/400mm, brezstopenjska vretena hitrost 9–6750o/min v 8 območjih, z elektronskim nadzorom vrtilne hitrosti. Hod pinole: 127mm. 3-osni digitalni prikaz DPA21. Preklopnik za desni/levi tek. Nastavljive globine vrtanja. Križna miza X/Y 1244mm/230mm, T-utor 16mm. Zaščitni pokrov vpenjalne glave. Naprava za hlajenje. Ročno centralno mazanje. Univerzalni sistem vpenjanja orodij na stisnjen zrak ISO 40. Brezstopenjski pomiki mize po X/Y. Teža: cca. 1200kg. Ogled je možen po dogovoru. Hfedpfx Ajxyk Ucjlfeg

Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC stroj za upogibanje ploščate žice v navpični legi proizvajalca V&C GmbH. Območje debeline žice: 0,8 mm–10 mm, največja širina žice: 30 mm, najmanjši notranji premer navitja: 20 mm, največji zunanji premer navitja: 250 mm, največja višina navitja: 160 mm, največja višina navitja z nosilno palico: 500 mm, največja dolžina navitja: 250 mm, najmanjši polmer upogiba: R6°, največje število robov: 12/obrat. Dimenzije stroja X/Y/Z: pribl. 2650 mm/1000 mm/1800 mm, teža: pribl. 800 kg. Dokumentacija je na voljo. Ogled stroja na lokaciji je možen. Hfjdpfxoycwtfj Alfeg

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj neuporabljena ploščinska brusilka Optimum. Širina brušenja: 220mm, dolžina brušenja: 470mm, višina brušenja: 350mm, dimenzije mize X/Y: 210mm/450mm, maksimalna razdalja med sredino mize in vretenom: 450mm, dimenzije brusnega koluta X/Y/Z: 200mm/13mm/31,75mm. Dimenzije stroja X/Y/Z: pribl. 1200mm/1450mm/2000mm, teža: pribl. 800kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Hfsdpfexx Udlox Alfsg

Stanje: novo, Leto izdelave: 2025, premer struženja nad prečnim suportom: 270 mm, izvrtina vretena: 58 mm, premer struženja: 460 mm, višina središča: 230 mm, širina na sredini: 1.060 mm, poteza s peresom: 130 mm, premer tulec: 60 mm, skupna dolžina: 2.280 mm, skupna širina: 1.150 mm, skupna višina: 1.650 mm, Premer struženja v izrezu: 690 mm, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 25 obr/min, skupna masa: 1.910 kg, nosilec puše: MK 4, maksimalni metrični navoj (korak): 14 mm, premer puše konjička: 60 mm, Optimum lead and feed screw lathe TH 4610D with DPA 31 Plus digital position display and quick-change tool post Hardened and ground Z-axis guideways Guaranteed spindle nose runout accuracy ≤ 0.015 mm Shafts, gears, and main spindle running in oil bath Leadscrew cover Precisely machined carriage All guides adjustable via gib strips Mechanical longitudinal feed cut-off for the carriage with four adjustable eccentrics Forward/reverse operation on the carriage switchable via control shaft Central lubrication in the carriage Compound slide adjustment range ±90° Gear wheels smooth-running, hardened and ground, mounted in two adjustable precision tapered roller bearings Switch with lifecycle calculation, tested according to EN ISO 13849 Large chip guard with integrated LED machine lamp Hfedpfxowaaf Hs Alfsg Handwheels with adjustable fine graduation 0.04 / 0.02 mm Safety handwheels with disengagement function according to EN23125 on X and Z axes Rapid-change feed gearbox of closed design, gears and shafts hardened and ground, running in oil bath in precision bearings Thread dial scale adjustable Tailstock adjustable for taper turning ±10 mm Tailstock quill and handwheel with adjustable fine graduation 0.025 mm Fast, simple, and tool-free tailstock adjustment via clamping lever Cable routing via drag chain Heavily ribbed, prism bed, induction-hardened and precision ground, made from grey cast iron Coolant system with separate coolant tank featuring level indicator and oil separator; easy and complete draining and cleaning as per DIN Emergency stop function with foot operation Scope of delivery: Fixed steady rest, bore Ø 25 - Ø 178 mm Travelling steady rest, bore Ø 19 - Ø 114 mm LED machine lamp Adapter MK6-MK4 Dead centre MK4 Dead, but temperature resistant, centre MK4 Quick-change tool post SWH 5-B Tool holder 25 x 120 Type D for 20 mm square turning tools Thread dial indicator Change gear set Gears for metric thread dial indicator First machine fill with quality oil Operating tools Options on request, we are happy to advise: - 3-jaw or 4-jaw chuck - Tool holder / Turning tools - Mounting elements - Commissioning Do you need a different machine? Please contact us!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Premer reza 128 mm Dolžina tračnega lista / mm Višina mize / mm Hfsdpfoxbh Hfsx Alfog

Stanje: rabljeno, Leto izdelave: 2003, Travel X: 930 mm Travel Y: 400 mm Travel Z: 406 mm Spindle speed: 9–6,750 rpm Hfjdpfx Aot U Rm Islfsg Table size: 1,370 x 254 mm Quill stroke: 127 mm Quill feed: (3) 0.04; 0.08; 0.15 mm/rev Drilling capacity in steel: 32 mm Feed range: 19–890 (X) mm/min Spindle taper: SK 40 Column overhang: 200–680 mm Total power requirement: 4 kVA Machine weight approx.: 1.15 t Space requirement approx.: 1.5 x 1.45 x 2.2 m Product Information: “Multifunction Milling Machine Optimill MF 4 Vario—Tool Milling Machine with Variable Speed” Optimill MF 4 Vario—multifunctional drilling-milling machines designed for professional applications. Electronically stepless drive control with frequency inverter “made in Germany” and digital 3-axis position display DPA 21. Heavy, robust design made of high-quality Meehanite cast iron. High concentricity accuracy with tapered roller bearings, measured at less than 0.01 mm in the quill. Automatic quill feed. Forward/reverse rotation for thread cutting. X- and Y-axes feature adjustable dovetail guideways. Coolant system. Y-axis with flat guideway. Large Y-axis travel of 400 mm. Motorized table height adjustment with rapid traverse on Z-axis. Equipment details: - Frequency inverter quality made in the EU - Drilling-milling head, tiltable ±45°, overhang 200–680 mm, spindle speeds - Stepless speed control with extra-wide speed range - Adjustable drilling depth stop with millimeter scale, easily readable on front - Safety screen, height-adjustable and generously dimensioned - Cross table: massive, large, precisely surface-machined - Motorized table height adjustment on Z-axis - Adjustable limit stops - OPTI control panel: integrated control console - Integrated digital position display DPA 21 with speed display - X-axis : motorized table feed, stepless speed control, rapid feed, forward/reverse Technical Data: Product length: 1,500 mm Product width/depth: 1,450 mm Product height: 2,200 mm Net weight: 1,150 kg Total power connection: 4 kW Electrical voltage: 400 V Phases: 3~ Network frequency: 50 Hz Max. face mill diameter: 100 mm Max. shank cutter diameter: 20 mm Vertical spindle reach: 200–680 mm Vertical spindle taper: ISO 40 DIN 2080 Vertical spindle speed range: 8 steps Vertical spindle speed control: electronically adjustable Horizontal table length: 1,370 mm Horizontal table width: 254 mm Vertical spindle to table min.: 40 mm Vertical spindle to table max.: 446 mm Horizontal table T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Horizontal table max. load: 275 kg Vertical spindle motor power (normal mode): 3 kW Coolant pump motor power: 100 W Manual X-axis travel: 930 mm Manual Y-axis travel: 400 mm Manual Z-axis travel: 406 mm Automatic X-axis travel: 850 mm Automatic Z-axis travel: 350 mm Drilling capacity steel (S235JR): 32 mm Continuous drilling capacity steel (S235JR): 28 mm Vertical spindle drilling head swivel range Z-X plane: ±45° Vertical spindle quill stroke: 127 mm Vertical spindle quill feed: 0.04/0.08/0.15 mm/rev

Stanje: novo, Leto izdelave: 2010, Outreach: 235 mm Column diameter: 60 mm Table size: 290 x 290 mm Motor power: 1 kW Speed: 50 - 4000 rpm Machine weight: approx. 72 kg OPTIMUM Bench Drill OPTIdrill DX 17V - Column diameter: 60 mm - Machine length (approx.): 425 mm - Width/depth (approx.): 481 mm - Height (approx.): 910 mm Drilling capacity: - Drilling capacity in steel (S235JR): 16 mm - Continuous drilling capacity in steel (S235JR): 13 mm - Tapping in steel (S235JR): M8 Drill table: - Working area length: 290 mm - Working area width: 290 mm - T-slot size: 10 mm - Number of T-slots: 2 - T-slot spacing: 100 mm - Min. distance chuck - table: 98 mm - Max. distance chuck - table: 315 mm Speed range: - Speed range: 50 - 4000 rpm - Electronic stepless speed control Electrical data: - Drive motor power: 1.0 kW - Supply voltage: 230 V - Mains frequency: 50 Hz Base: - Min. distance chuck - machine base: 0 mm - Max. distance chuck - machine base: 385 mm - Base working area length: 290 mm - Base working area width: 280 mm - Base T-slot size: 14 mm - Number of base T-slots: 2 - Base T-slot spacing: 100 mm Hjdpfew Spc Rox Alfjfg Standards and approvals: - Standard: DIN EN 55011 EMC class C2 Spindle: - Quill stroke: 60 mm - Spindle taper: MK 2 - Outreach: 235 mm Packaging dimensions: - Length: 540 mm - Width: 420 mm - Height: 1,040 mm - Gross weight: 87 kg - Net weight: 72 kg Order no.: 3020170 Brand new machine from year 2010 in original packaging Bench Drill OPTIdrill DX 17V with stepless variable speed control. Machine highlight – menu-guided operation for drilling/tapping modes. Description: - Optimum power transmission via aluminium belt pulleys - Emergency stop button - Precision ball bearing drill spindle - Guaranteed runout accuracy of less than 0.03 mm measured at the spindle - Dirt- and water-resistant, easy-to-clean membrane keypad with high-contrast OLED display - Glare-free LED lighting left and right, integrated into the drill head – no annoying shadows - Tapping mode - Language selection in display: DE-EN-FR-RU - Digital reference point - Digital part counter - Acoustic signal when drilling depth is reached - Reduced speed in tapping mode - Height-adjustable chuck guard with microswitch for maximum safety - Precisely machined drill table with parallel T-slots, precision surface finish - Swing-away drill table - Solid base plate with parallel T-slots Equipment details: During drilling and tapping, the machine automatically sets the optimum speed for the tool based on the specified drill diameter and material.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Optimum OPTImill MZ 2S Tool Milling Machine Ideal for training workshops! Available for immediate delivery. Equipped with NEWALL DP 700 digital 3-axis position display. Feed axes controlled by inverter drive via the operating panel. Hfodpfx Alouqix Uefsg Versatile range of applications Excellent vibration dampening and sturdy machine base All guides are hardened, precision ground, and adjustable via gib strips Automatic feed in X, Y, and Z axes, continuously adjustable via electronic joystick on the control panel Electric feed limit shutoff Ball screw drive on all axes Centrally positioned, clearly arranged control panel with integrated digital position and speed display Robust, large cross table with precision-machined surface and 5 T-slots Coolant system Large handwheels with scales Machine lamp Smooth operation Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product): approx. 1239 mm Width/depth (product): approx. 1168 mm Height (product): approx. 1900 mm Net weight: approx. 1400 kg Drill/Milling Head Milling head swivelling range: ± 90° Drilling/Milling Capability Maximum cutter head diameter: 100 mm Drilling capacity (steel S235JR): 30 mm Continuous drilling capacity (steel S235JR): 26 mm Maximum end mill diameter: 25 mm Electrical Data Drive motor power: 2.2 kW Connection voltage: 400 V Mains frequency: 50 Hz Horizontal Milling Table Table length: 750 mm Table width: 320 mm Vertical spindle to table distance (min.): 75 mm Vertical spindle to table distance (max.): 410 mm T-slot size: 14 mm Number of T-slots: 5 T-slot pitch: 63 mm Horizontal spindle to table distance (min.): 70 mm Horizontal spindle to table distance (max.): 400 mm Maximum table load: 285 kg Vertical Milling Table Table length: 830 mm Table width: 250 mm T-slot size: 14 mm Number of T-slots: 2 T-slot pitch: 63 mm Coolant System Coolant pump drive power: 95 W Travel Range X-axis manual travel: 400 mm Y-axis manual travel: 200 mm Z-axis manual travel: 335 mm X-axis automatic travel: approx. 310 mm Y-axis automatic travel: approx. 160 mm Z-axis automatic travel: 295 mm Vertical Spindle Vertical spindle reach: 100 mm Spindle mounting: ISO 40 DIN 2080 Spindle speed range: 50 – 1890 rpm Number of speed ranges: 12 steps Drawbar: M16 Quill stroke: 120 mm Maximum spindle load: 1100 Nm Feed Speed Feed speed X-axis: 10 – 600 mm/min Feed speed Y-axis: 10 – 600 mm/min Feed speed Z-axis: 10 – 600 mm/min Electrical Connection Total connected load: 4 kW Motors Rapid traverse X-axis drive motor power: 0.375 kW Rapid traverse Y-axis drive motor power: 0.375 kW Rapid traverse Z-axis drive motor power: 0.375 kW

Stanje: dober (rabljeno), Manufacturer: Optimum Type / Model: DDP 50 Hfsdpfx Aordgrkolfog Pressing force: 1.5 t Table: mm Ram: 50 x 50 x 647 mm Throat depth: 226 mm Lever length: 850 mm Ram stroke: Max. workpiece height: 459 mm Accessories/Equipment: Condition: good Weight: 167 kg Dimensions: 650 x 370 x 785 mm

Stanje: novo, Leto izdelave: 2025, For information on delivery times and current daily prices, please inquire directly. Dimensions and Weights: Length (product): approx. 1760 mm Width/Depth (product): approx. 745 mm Height (product): approx. 1320 mm Hsdpjq T R Aasfx Alfofg Weight (net): approx. 469 kg Max. height (product): approx. 1590 mm (DPA) Working Areas: Center height: 165 mm Center distance: 1000 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 216 mm Bed width: 190 mm Speed Range: Number of speed ranges: 9 steps Speed range: 65 – 2000 rpm Electrical Data: Drive motor power: 1.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 4 Spindle bore/bar passage: diameter 38 mm Max. toolholder height: 16 mm Spindle taper: MT 5 Tailstock: Tailstock taper: MT 3 Tailstock quill travel: 100 mm Tailstock quill diameter: 38 mm Threads: Metric pitch: 0.4 – 10 mm/rev Number of metric pitches: 29 Inch pitch: 56 – 4 TPI Travel: Cross slide travel: 90 mm Compound slide travel: 168 mm Bed slide travel: 850 mm Feed: Longitudinal feed range: 0.02 – 0.4 mm/rev Number of longitudinal feed rates: 24 Face feed range: 0.01 – 0.2 mm/rev Number of face feed rates: 32

Stanje: novo, Leto izdelave: 2025, For current prices and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Net weight: approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter over bed gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in bed gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system pump output: 125 W Spindle: Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Maximum tool post height: 25 mm Spindle taper: MK 6 Tailstock: Tailstock taper: MK 4 Hfedpfx Aoq Ukbpjlfjg Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Threads: Metric pitch: 0.1 – 14 mm/rev Number of metric pitches: 41 Imperial pitch: 112 – 2 TPI Number of imperial pitches: 41 Diametral pitch: 4 – 112 DPI Number of diametral pitches: 50 Module thread pitch: 0.1 – 7 mm/rev Number of module thread pitches: 34 Travel: Cross slide travel: 125 mm Compound slide travel: 285 mm Carriage travel: 1805 mm Feed: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Stanje: novo, Leto izdelave: 2025, New machine. Please request the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Hodpfx Aorah S Hslfjfg Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Supply voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Ranges: Cutting range 0° round (solid material): 355 mm Cutting range 0° square (solid material): 300 mm Cutting range 0° upright rectangle (solid material): 300 x 490 mm Cutting range -45° round (solid material): 290 mm Cutting range -45° square (solid material): 250 mm Cutting range -45° upright rectangle (solid material): 250 x 250 mm Cutting range +45° round (solid material): 350 mm Cutting range +45° square (solid material): 290 mm Cutting range +45° upright rectangle (solid material): 290 x 340 mm Cutting range +60° round (solid material): 230 mm Cutting range +60° square (solid material): 180 mm Cutting range +60° upright rectangle (solid material): 180 x 220 mm

Stanje: novo, Leto izdelave: 2026, Heavy-duty design for the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency stop hammer switch Drilling depth stop LED machine light integrated in the drill head Precisely manufactured, stable drill table with diagonally arranged T-slots and all-round coolant channel Drill table tiltable ± 45° and rotatable 360° V-belt cover with safety switch Precision spindle bore Machine operation safety electrics: 24 V DC Guaranteed concentricity accuracy ≤ 0.02 mm measured in the drill spindle Hjdpfx Aog Uaiuslfsfg Thick-walled steel column for high load capacity and stability Heavy-duty, large base plate with T-slots Dimensions and Weights: Column diameter: 92 mm Length approx.: 945 mm Width/depth approx.: 485 mm Height approx.: 2040 mm Weight approx.: 162 kg Drilling Capacity: Drilling capacity in steel (S235JR): 30 mm Continuous drilling capacity in steel (S235JR): 25 mm Drill Table: Working surface length: 355 mm Working surface width: 355 mm T-slot type: diagonal T-slot size: 14 mm Number of T-slots: 2 Rotation: 360° Tilt: 45° Spindle-to-table distance max.: 784 mm Speed Range: Speed range: 120 – 1810 rpm Number of speed ranges: 9 Electrical Data: Connection voltage: 400 V Line frequency: 50 Hz Machine Base: Spindle-to-base distance max.: 1470 mm Working surface length: 230 mm Working surface width: 300 mm T-slot size: 16 mm Number of T-slots: 2 Spindle: Quill stroke: 125 mm Spindle mount: MT 4 Throat depth: 270 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Optimum Optisaw SD 500 Double Miter Metal Band Saw with Swiveling Saw Frame Item no. 3292380 Approx. length: 2122 mm Approx. width/depth: 1046 mm Approx. height: 1497 mm Approx. weight: 522 kg Electrical Data Coolant Pump Motor Power: 100 W Total Connected Load: 3.8 kW Supply Voltage: 400 V Frequency: 50 Hz Machine Data Saw Band Speed(s): 35 / 70 m/min Saw Band Length: 3770 mm Saw Band Width: 34 mm Saw Band Thickness: 1.1 mm Miter Angle: 45 to -60° Feed: Hydraulic via Downfeed Cylinder Saw Frame Lift: Manual Cutting Capacities 0° round (solid): 355 mm 0° square (solid): 280 mm 0° upright rectangle (solid): 280 x 490 mm -45° round (solid): 290 mm -45° square (solid): 250 mm Hfjdpfogd Si Ejx Alfjg -45° upright rectangle (solid): 250 x 250 mm +45° round (solid): 355 mm +45° square (solid): 280 mm +45° upright rectangle (solid): 280 x 340 mm +60° round (solid): 230 mm +60° square (solid): 180 mm +60° upright rectangle (solid): 180 x 220 mm Heavy-duty industrial design Quiet operation High cutting accuracy due to vibration-free running Miter adjustment from -45° to 60° by swiveling the entire saw frame Supplied as standard with high-quality bi-metal saw blade Micro switch for automatic end-stop Coolant pump Ball bearing saw band guides with carbide plates for optimal cutting results Simple adjustment of downfeed speed via feed control valve on the operator panel Large, quick-release vice, laterally adjustable Clear operator control panel Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, OPTIdrill D 26PRO - Pillar Drilling Machine Bench and pillar drilling machine with V-belt drive User-friendly safety switch to IP 54 with undervoltage release and separate emergency stop push-button 400 Volt models with forward/reverse operation Drilling depth stop Precisely machined drill table with diagonally arranged T-slots Drill table height adjustment via rack and pinion Drill table tiltable ±45° and rotatable 360° V-belt guard with safety switch Aluminium die-cast quill lever made from a single piece with soft-grip handles Hfedpfxodqzbne Alfsg Industrial motor Precision spindle bore Machine operation and safety electrics in 24 V DC Guaranteed concentricity accuracy