Oest Gmbh & Co. Maschinenbau Kg Klebstoffauftragsmaschine & Setzaggregat nakup rabljenega (100.960)

Stanje: novo, Leto izdelave: 2025, IDEAL FOR STAIRCASE CONSTRUCTION Further variants available on request - 5 levels - Clamping depth 1050 mm Pedpfx Aegu D Rmja Dspt - 1 pressure beam, 1500 mm long, 60 mm high, per level - 3 infinitely adjustable pendulum counter-bearings, 400 mm long, per level - 2 hold-down devices with handwheels per level - 5 support arms per level - all support arms equipped with plastic pads (glue-repellent) - maximum pressing length 1600 mm - Powder-coated (glue-repellent): grey white RAL 9002, moving parts light blue RAL 5012 - Presses are supplied ready for operation with pressure control valve and standard air connection.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Technical description with the following main data: Load capacity 1000 kg static distributed load Usable lift 775 mm Closed height 85 mm Overall height 860 mm Platform length 1450 mm Platform width 1140 mm Material Smooth sheet steel Lifting time approx. 20 sec. for full stroke Lowering time load-dependent Electrical connection 3 x 400 V / 50 Hz + grounding, with 16 A CEE plug and 4-meter cable Motor 1.1 kW Paint finish Blue-grey RAL 7031 Power unit positioning free-standing Control box Deadman control including 2 m cable Total weight approx. 270 kg Standard version: The lift tables comply with EN 1570 E and are CE-marked. All steel components are cleaned, primed with rust-inhibitive paint, and coated with two-component polyurethane paint. The lift tables are equipped as standard with all-round safety contact strips made of aluminum and maintenance props for repair and service work. Our lift tables are designed for approximately 5 cycles per hour at full load over 8 hours/day. For more intensive use, we offer special lift tables. Ppsdpjiwi Injfx Aa Djt

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, consisting of: › Stop rail, 2 m long › 2 complete stops › 1 measuring scale, right to left Ppodpfxefrnpns Aa Dot › 1 measuring scale, left to right › Mounting screws - The wooden base rail 50 x 45 mm, onto which the stop rail is mounted, is not included in the scope of delivery.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Technical description with the following main data: Load capacity: 1000 kg static distributed load Usable lift: 810 mm Collapsed height: 200 mm Overall height: 1010 mm Platform length: 1300 mm Platform width: 800 mm Material: smooth sheet steel Lifting time approx.: 16 sec. for full lift Lowering time: load-dependent Electrical connection: 3 x 400 V/50 Hz + protective earthing, with 16 A CEE plug and 4 m cable Motor: 0.75 kW Paint finish: blue-grey RAL 7031 Power unit location: integrated in the lift table Control box: dead man’s control incl. 2 m cable Total weight: approx. 160 kg Standard version: The lift tables comply with EN 1570 E and are CE-marked. Ppsdpfxogqu A Te Aa Dst Steel parts are cleaned, primed with rust-inhibiting paint, and finished with two-component polyurethane lacquer. The lift tables come standard with all-round aluminium safety trip bars and maintenance props for repair and servicing. Our lift tables are designed for approx. 5 cycles/hour at full load for 8 hours/day. For more intensive operation, we offer special lift tables. Warranty: 1 year on parts under normal single-shift operation, excluding labour costs.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, various lengths available on request - Length 3000 mm with 3 support legs - Roller conveyor with scale, manual measuring system with adjustable and foldable length stop including magnifying glass - Roller and measuring track suitable for light plastic, aluminum, and steel profiles Pjdpfx Asgrn U Sja Dept - The maximum measuring length is the track length minus 250 mm - Carrying rollers, roller diameter 50x1.5 mm, galvanized steel tube - Axle diameter 8 mm - Track width 390 mm, usable roller width 300 mm - Load capacity per meter of roller conveyor approx. 100 kg/m - Roller pitch approx. 290 mm - Track height adjustable from 770–1070 mm - All parts painted, color silver grey RAL 7042, feet anthracite grey RAL 7016

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Technical Specifications: - Motor power: 2.2 kW S1 - Max. saw blade diameter: 350 mm Ppedpfsfhbuyex Aa Det - Saw blade bore: 30 mm - Cutting time per stroke: 1.5 sec. - Saw spindle speed: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction port: 2x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 200 kg - Required airflow: 1000 m³/h - Voltage: 400 V / 50 Hz, 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard Equipment: - Saw blade feed with pneumatic drive - Automatic motor brake - Set of operating wrenches - Emergency stop mushroom switch - Feed speed regulator for saw blade - Fixed vertical safety guard - Upper safety pressure device (pneumatic safety cover) - Minimum extraction speed: 28 m/sec - Colours: Base frame light grey RAL 7035, doors tele grey RAL 7046, safety guard and cover zinc yellow RAL 1018 - Incl. HM (carbide-tipped) circular saw blade for wood 350x3.5x2.4x30mm Z72

Stanje: novo, Leto izdelave: 2024, - Length 3000 mm with 3 support legs - Roller and measuring track for lighter plastic, aluminum, and steel profiles - Carrying rollers, roller diameter 50x1.5 mm, galvanized steel tube - Axle diameter 8 mm - Track width 390 mm, usable roller width 300 mm Ppedpfx Aajhd N Hys Det - Load capacity per meter of roller conveyor approx. 100 kg/m - Roller pitch approx. 290 mm - Track height adjustable from 770–1070 mm - All parts are coated, color silver grey RAL 7042, feet anthracite grey RAL 7016

Stanje: novo, Leto izdelave: 2024, Double Scissor Lift Table Type TMH 6000 *Custom Design Beck lift tables bear the CE mark. They are manufactured in accordance with the applicable regulations for lift tables and comply with the Machinery Directive as well as EN 1570. All steel components are cleaned, primed with anti-corrosion paint, and finished with a two-component polyurethane top coat. Base frame and platform painted Blue RAL 5015, scissors painted Orange RAL 2003. The surface treatment is robust and highly durable. With the new power units, the system’s pipe rupture valve configuration has been modified. A new 3/2 valve, combined with a solenoid valve, now ensures safety in accordance with EN 1570. The valves are mounted directly on the cylinder, not on the power unit. Furthermore, the lowering time is fixed and not adjustable; however, an alternative lowering speed can be provided at no extra charge. An adjustable lowering time is also available for an additional cost. The tables are designed for a 3 x 400 V / 50 Hz + protective earth electrical connection, with no neutral conductor required. The control box is mounted directly on the motor. Control voltage for all functions is 24 V DC. Both the control box with control board and the operator panel are rated to IP 65, the table as a whole to IP 54. All motors operate at 1400 rpm, ensuring a long service life and low noise levels for the hydraulic system. All tables comply with applicable noise protection regulations and operate at from 52 dBA. Technical Data: - Load capacity: 5,000 kg, static distributed load Psdpfxey E Sds Aa Djpt - Usable lift: 1,100 mm - Closed height: 240 mm, including reinforced guide rails - Overall height: 1,340 mm - Length: 10,000 mm - Width: 1,200 mm - Lifting speed: approx. 28 mm/sec - Motor power: 2.2 kW - Platform made from two 5,000 x 1,200 mm sections, assembled with flanges during final assembly - Service opening or free-standing power unit available upon request - Reinforced guide rails beneath the platform - The lift table is designed for approx. 10 cycles/hour at full load over an 8-hour period

Stanje: novo, Leto izdelave: 2024, 4 UNITS AVAILABLE FOR SHORT-TERM DELIVERY Ppsdpfsgmht Ssx Aa Dot with 15 supports (support surface: bead rubber) Dimensions (LxWxH): 910 mm x 700 mm x 1850 mm Tray depth: 510 mm Tray width: min. 500 mm - max. approx. 2000 mm Clear gap between trays: approx. 78 mm Max. load capacity: approx. 600 kg evenly distributed Load capacity per rack: approx. 40 kg Weight: approx. 90 kg

Stanje: novo, Leto izdelave: 2024, Under-table Crosscut Saw UTK-600 with vertically positioned front safety shield – pneumatically adjustable up/down incl. saw blade Manufactured in accordance with the latest PLC safety controls limited by the new Machinery Directive Technical Data: - Motor power: 7.5 kW S1 - Max. saw blade diameter: 600 mm - Saw blade bore: 35 mm - Cutting cycle time: 4 sec. per stroke - Saw spindle speed: 2,800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction ports: 2x120 mm, 1x100 mm - Operating pressure: 7–8 bar - Net weight: approx. 520 kg - Required air flow: 1,000 m³/h Ppodpjf Sqy Djfx Aa Dot - Voltage: 400 V / 50 Hz, 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard features include: - Pneumatic saw blade feed drive - *NEW Two-hand PLC safety control system - Automatic motor brake - Set of service keys - Emergency stop push button - Adjustable saw blade feed speed controller - Fixed vertical safety guard - Upper pneumatic safety pressure device (safety hood) - Extraction speed minimum 28 m/sec. - Colours: Base frame light grey RAL 7035, doors tele grey RAL 7046, safety shield and hood zinc yellow RAL 1018

Leto izdelave: 2013, stanje: kot nova (razstavni stroj), Technical description with the following main data: Load capacity 1000 kg static distributed load Net lift 895 mm Closed height 85 mm Overall height 980 mm Platform length 1450 mm Ppsdpfxjfm U Aus Aa Dst Platform width 1000 mm Material Smooth plate steel Lift time approx. 15 sec. for full net lift Lowering time Depends on load Electrical connection 3 x 400 V/50 Hz + protective earth, incl. 16 A CEE plug and 3 m cable Motor 1.1 kW, 1,400 rpm Solenoid voltage 24 V DC Protection class IP 54 general, solenoid valve and switches IP 65 Power unit position Free-standing Control box Dead-man control incl. 2 m cable Total weight approx. 205 kg Standard version: The lift tables comply with EN 1570 E and are CE-marked. Steel parts are cleaned, primed with anti-rust primer and painted with two-component polyurethane paint. All lift tables are equipped as standard with safety perimeter shut-off bars made of aluminum and with maintenance props for repair and service. Our lift tables are designed for approx. 10 cycles/hour at full load over an 8-hour shift per day. For more intensive use, we offer special lift tables. Warranty: 1 year on parts under normal single-shift operation, excluding labor costs.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, - Mobile scissor lift table with metal sheet platform - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 300 kg Ppodpofnp Rpsfx Aa Dot - Minimum height: 400 mm - Lifting stroke: 610 mm - Maximum height: 1010 mm - Platform dimensions: 1000 x 600 mm - Net weight: 75 kg - Castors: 2 swivel castors with brake, 2 without brake - Wheel diameter: 125 mm - Powder-coated finish: Base frame and platform frame in light grey RAL 7035, scissors in violet blue RAL 5000

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106341-11, Leto izdelave: 2005, skupna masa: 8.000 kg, skupna višina: 2.700 mm, skupna dolžina: 5.660 mm, skupna širina: 3.956 mm, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling unit information: - Number of spindles: 1 - Continuously variable spindle speed: 300 - 8000 rpm - Spindle drive power: 7.5 kW - Maximum drilling depth: 800 mm - Minimum/maximum drilling diameter: 3 - 25 mm (based on ST 60) - Maximum spiral drilling: 25 mm - Maximum tapping: M24x3 - Milling material removal rate: 150 cc/min Travel distances: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Traverse speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Coolant system information: - Deep-hole drilling oil as coolant - Tank capacity: 800 litres - 1x scraper belt swarf conveyor - 1x hydraulic power unit and pneumatic system/equipment - 1x submersible pump: Pump capacity: 200 l/min Ppodpfow E H E Rsx Aa Dot - 1x low-pressure pump: Pump capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min For use with: steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 94 l/min Pump drive: 7.5 kW Spindle unit: - Cartridge-type spindle with drive housing and gear-driven spindle drive. Spindle bearings are precision angular contact ball bearings with lifetime grease lubrication. Milling and drilling spindle unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill bush carrier: - Version as a 2-position turret with electric swivel mechanism - Positioning via Hirth coupling - Turret head equipped for: - Tool guides for deep hole drilling - Milling and drilling spindle unit for conventional machining Pickup tool changer: - For conventional tools and drill bushes - Disc-type magazine with 20 positions including pick-up stroke Automatic tool changer for deep hole drilling tools: - Fixed ELB column magazine for at least 5 tools, including automatic tool clamping for HSK holders Clamping table with W-axis and NC rotary table: - Length/width: 800x600 mm - Positioning accuracy: B-axis +/- 30 seconds - Load capacity (centrally): 1500 daN Workpiece clamping device: - 1x tailstock with manually operated clamping - 1x NC dividing head (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushes + support prisms Electrical equipment information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106882-11, skupna dolžina: 4.400 mm, skupna širina: 1.700 mm, skupna višina: 2.700 mm, skupna masa: 7.000 kg, The drilling method of the deep hole drilling machine is the single-lip drilling process. Drilling unit information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle center distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Spindle speed, stepless: 1,000 – 20,000 rpm - Feed rate, stepless: 10 – 25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid information: - Coolant supply: deep-hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction Psdewh Rp Ejpfx Aa Dopt - 1x scraper belt chip conveyor - 1x hydraulic and pneumatic power unit/system - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled stepless speed adjustment - Spindle head with connection for tool holder - 2 x tool holder for setting sleeves to VDI 3208 SE10x60, screwed onto the spindle head of the motor spindle Guide bush carrier: - The guide bush carrier is referenced via the NC axis - Cast design, mounted on linear guides - Drive for W-axis using AC servo motor and ball screw with indirect, absolute position measuring system Workpiece carriage: - The workpiece carriage is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting fixture plates or special clamping devices - Base body in cast design with linear roller guides - Drive for X and Y axes by AC servo motors and ball screws - Direct, absolute position measuring systems. Clamping/radial slot on table plate Clamping table with NC rotary table for positioning: - With rotary and swivel axes - Hydraulic clamping on both rotary and swivel axes Technical data: - Swivel range: 270° - Rotary range: 360° - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Machine auxiliary equipment: - 2 x holder for spring-loaded guide bush, arranged on the guide bush carrier - For max. drilling diameter Ø 18 mm

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106546-11, skupna višina: 3.550 mm, skupna dolžina: 7.185 mm, skupna širina: 4.720 mm, skupna masa: 8.000 kg, The drilling method of the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed, steplessly adjustable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Maximum drilling depth: 1,000 mm (in one pass, without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter with indexable inserts: 40 mm - Maximum thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel Axes: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x hinge belt chip conveyor - 1x screw conveyor system - 1x hydraulic unit and pneumatic unit/equipment - 1x central lubrication - 1x submersible pump: Pump delivery rate: 200 l/min - 1x low-pressure pump: Pump delivery rate: 100 l/min Pump drive: 2.2 kW - 1x compact belt filter: Filtration rate: 175 l/min For machining steel/non-ferrous materials - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction system, Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with SK 40 tool holder Tool Change Magazine consists of: - Tool magazine with intermediate gripper Psdpfx Asxdm Awoa Dspt - SK 40 tool holders - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Tool storage positions: 80 - 2x swivelling tool steadies for guiding and supporting long drilling tools, with automatic return to home position. Clamping table with B axis and NC rotary table: - Length/width: 800x600 mm - B axis: 360° - Positioning accuracy B axis: +/- 30" - Table travel: 800 mm - Payload (centrical): 1,500 daN Electrical Equipment: - 1x CNC control, Heidenhain iTNC 530 - 1x drilling process monitoring - 1x RENISHAW probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Leto izdelave: 2006, stanje: zelo dobro (rabljeno),

Stanje: novo, Leto izdelave: 2024, Frame and Edge Press with Manual Hydraulic Press Units, single-sided, stationary > robust frame-welded construction > frame press unit with continuous left-hand support > 1 sliding carriage for width adjustment with positioning lock in 50 mm hole grid system, equipped with central locking drive bolt > 2 horizontally and infinitely adjustable manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke > 5 roller-mounted vertical pressure beams made from thick-walled profile tube, electro-galvanized, with manual hydraulic press units, each with 20,000 N pressing force and 60 mm stroke. Press units adjustable within a 50 mm hole grid. Counter support adjustable in 6 steps with anti-drop safety. Counter support and pressure plate, 140 mm long, 80 mm deep. Ppodpeyuxkjfx Aa Dot > 1 hold-down device, electro-galvanized, for manual suspension, with screw-down pressure > Finish: grey white RAL 9002, pressure plate and counter support gentian blue RAL 5010. > External dimensions (W x H x D): 3340 x 2350 x 730 mm (long version: 3690 x 2350 x 730 mm) > optionally available with more or fewer vertical pressure beams (see accessories list) Usable size (W x H in mm) as frame press: 2700 x 1800 Usable size (W x H in mm) as edge press: 3000 x 1800 Price plus packaging: €92 net Special solutions available on request!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, RHV-C&V GmbH & Co. KG zapiralec za steklene kozarce Psdpfx Aaeyxgxws Dept tip: LW560 številka: 10172/4184 leto izdelave: 09/2010 nerjaveči jekleni trak, širina traku: 120 mm

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, MiniBendCenter RAS 79.05 Fully Automatic Panel Bending Center for Small Parts - General Information: Directly from the manufacturer Manufacturer’s warranty Maintenance included Latest available software version - General technical data in mm: Blank length: 50–600 Blank width: 40–600 Max. sheet thickness (400 N/mm²), tool-dependent: 3.0 Max. upper beam stroke: 500 mm Min. flange height (reference value, tool-dependent): 5 x s Max. flange height: 127 Weight of bending cell: 10 tons Weight of enclosure and electrical: approx. 2027 kg Weight of machine components: approx. 945 kg - Machine-related data: Motor operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2014 Condition: Refurbished – good used condition - Ppodpfxex Hyhus Aa Dst Machine configuration: Bending Cell: - Automatic sheet thickness adjustment - Automatic tool clamping - Blank scanner Main manipulator: - 3 servo motors for X, Y, Z axes - 1 servo motor for lower rotary axis plus separate drive for rotary axis - Double-sheet detection Tool changer: - 3 servo motors for X, Y, Z axes - 1 pneumatic rotary drive for rotary axis - Tool gripper - 2-level tool magazine - Automatic tool clamping in tool magazine Enclosure: - Bending cell front and rear Mobile operator panel: - 18" Touch & More control system Intelligent loading robot Combined camera and scanner system Analysis software Transfer table, Sauerfeld (52x9 mm) suction cup row (7x20 mm) Pallet station: - Roller conveyor and heavy-duty chain conveyor - 1 position for new pallets (parts to be processed) - 1 position for "pallet in process" - 2 positions for finished pallets (empty or with remaining quantity) Curved conveyor belt with 6 interfacing stations Finished parts discharge enclosure Complete tool set RAS CAM-Office software including SolidWorks license and 2-year maintenance contract - Sample images Sample video available on request -

Stanje: rabljeno, Machine designation: Dissolver Manufacturer: Schneider Maschinenbau GmbH Model: SHDC15 KWFU Ex Year of manufacture: 2010 Speed: 150 - 1500 rpm Material: Stainless steel Psdpfx Asrmmk Uoa Dopt Drive motor: 22.55 kW Design: Explosion protection: II 2 / 3 D c T120°C Total capacity: approx. 900 liters, 900-liter vessel Product-contacting parts: Stainless steel Features: Hydraulically extendable Dimensions: Machine height approx. 3100 mm (top section extended); length with vessel approx. 2200 mm; width with collet approx. 1800 mm (collet open) Weight (without vessel): approx. 1600 kg Foundation load: approx. 6000 kg/m³ Net weight: 1600 kg Technical documentation: Yes, in PDF Accessories: Stainless steel mixing vessel, dissolver disc (diameter 450 mm), frequency converter Condition: Used Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, širina odprtine za polnjenje: 1.400 mm, skupna širina: 4.950 mm, skupna višina: 4.443 mm, skupna dolžina: 8.093 mm, vrsta vhodnega toka: trifazni, hod: 60 mm, For sale is a used, but technically well-maintained machine, which was reliably in operation until the end of June 2024. The machine is in working condition and is ideally suited either for immediate reuse or as a solid basis for custom modifications. Technical Features & Equipment: Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bellows seals Rugged bellows seals in the drive couplings ensure reliable power transmission—maintenance-friendly and durable. Large couplings (latest design upgrade) The machine is already fitted with the large couplings in accordance with the latest machine specification, offering increased stability and performance. Standardized compaction units The installed compaction units comply with common industry standards, ensuring consistent and powerful processing. Psdpfx Aowzkuzoa Djpt Kneading rollers – good tread, used condition The kneading rollers are in used but fully functional condition with a good profile. Conveyor belts – used, but well preserved The conveyor belts show signs of age-appropriate use, but are operational and in good condition. Note: The polycarbonate inspection windows should be replaced due to wear marks appropriate for their age. The machine is currently dismantled but can be inspected. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date features. If you have any questions or would like to arrange a viewing appointment, we will be glad to assist you.

Stanje: zelo dobro (rabljeno), Dvigi za papirne skladove MZE Diplomat SHPA 175 × 130 Naprava je v brezhibnem stanju. Hidravlični pogon, najnovejša generacija hidravlične enote. Napajanje 400V. Dvig poteka preko upravljalne plošče, omogoča hitro delo. Nosilnost 1500 kg. Ppsdpfx Aaswyakco Djt Mere palete/pol listov: 1750×1300 mm.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, Professional Industrial Cutting Line (Longitudinal/Cross) – Grossmann – ONLY 100 Operating Hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from the quality manufacturer Grossmann Maschinenbau. The unit has a total running time of no more than 100 operating hours. It is therefore in almost mint technical condition and shows hardly any signs of wear on its mechanical components. The system was originally designed as a chipboard mat cutting machine, but thanks to its robust construction and versatile PLC control, it can be flexibly used for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical Highlights & Features: Condition: Almost as new (max. 100 operating hours). Format: Maximum cutting length 2,500 mm x maximum working width 1,200 mm. Complete Line: Includes professional unwinder and rewinder for fully automatic material flow from roll to roll or roll to format. PLC Control: Professional programming with a choice between manual and automatic operation. Material Handling: Automatic gripper feed that positions the material precisely in the final position, plus integrated edge trim for perfectly cleaned edges. Operation: Intuitive control via display, foot switch, and visual/acoustic completion notification (signal light/horn). Precision: Integrated laser for exact material alignment. Safety: Full enclosure and modern safety monitoring. Ppjdpfx Aoylxmfja Det Versatility: This machine is a true all-rounder for anything that comes from the roll and needs to be cut to precise sheet sizes or strips. The sturdy frame, built with a high-quality aluminium profile system, ensures maximum torsional rigidity. Complete documentation, including operating logs, circuit diagrams, and technical drawings, is fully available. The machine can be inspected and tested under power by appointment. For detailed technical information or questions about your application, I am happy to assist you personally. Contact: Phone: 05427 9423 20

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, dolžina transportnega traku: 2.250 mm, širina transportnega traku: 600 mm, Oprema: Na voljo je tipska ploščica, Stock no.: 503508 Machine / Device type: Conveyor belt Manufacturer: MK Maschinenbau Kitz GmbH Model: GUF-P 2000 AF 2550-600 Year of manufacture: 2008 - Belt conveyor for light to medium-weight conveyed materials. Flat belt conveyor: Belt width: 600 mm Pedpfx Aouiwrrsa Dopt Belt length: 2250 mm Load capacity: 75 kg

Leto izdelave: 2023, stanje: skoraj kot novo (rabljeno), številka stroja/vozila: 530211, Features → Robust cast iron machine housing → Automatic application and release of test force → Automatic switching between objective lens and indenter Ppjdpfxsc Ipc Uo Aa Dst → LED illumination → Digital measuring eyepiece → LCD color touchscreen display → Conversion to other hardness scales (e.g., HRC) → Easy operation Technical Specifications → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Testing method: Vickers → Eyepiece 10X → Automatic objective turret → Objectives 10X / 20X / 40X → Test force application speed 50µm/sec → Maximum specimen height 210mm → Maximum specimen depth 160mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Scope of Delivery → Hardness tester → Diamond indenter 136° Vickers → Flat test table Ø80mm → Prism support Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED illumination → Power cable → Accessory case → Operating manual Optional → VMS3 software (video measuring system) → Cross table 200x200mm (travel range 25 x 25mm) → Digital built-in micrometer (for transmitting edge distance to the VMS3 software) → Module "Automatic Measurement" (only in conjunction with VMS3 software) → PC system / monitor