Mikron Multistar Cx-24/1500R nakup rabljenega (10.424)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Ijdpfx Aljt Hw D Rs Netf Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement Isdpeu U Sabofx Al Nstf • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Ijdpfx Alot Hwxbe Nstf Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, TEHNIČNI PODATKI Pomik osi X: 1200 mm Pomik osi Y: 600 mm Pomik osi Z: 675 mm Hitrost vrtenja delovnega vretena: 30 - 8000 min⁻¹ Nosilec orodja: ISO B 40 Pomik X/Y/Z: 3000 mm/min Hitri pomik X,Y / Z: 24 / 20 m/min PODROBNOSTI O STROJU Napetost: 3 x 400 V AC + PE, 50/60 Hz Krmilna napetost: 24 V DC Priključena moč: 16 kW Teža: 8000 kg Iodpfx Asw Iqf Sel Njtf

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 110 mm, pomik osi Y: 150 mm, pomik po osi Z: 150 mm, dolžina obdelovanca (maks.): 40 mm, širina obdelovanca (maks.): 80 mm, The rotary transfer machine is fully equipped; the original price of the machine is approximately €3,000,000. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 110 mm Travel Y-axis: 150 mm Travel Z-axis: 150 mm Work Spindles Max. speed: 20,000 rpm Max. torque: 50 Nm Workpiece Maximum workpiece dimensions: Ø 40 x 80 mm Number of workpiece spindles: up to 24 Number of tools on the machine: up to 63 Lubrication pressure at tool center (bar): 80/110 Number of stations: 16 Isdpfx Aowy I Tlsl Notf Repeatability of table positioning: Ø 20 x 60 mm MACHINE DETAILS Electrical Data Voltage, phase frequency: 400 V / 50 Hz Weight & Transport Dimensions Weight: 19,000 kg Transport dimensions: 400 x 300 x 340 cm EQUIPMENT Chip conveyor Frame for oil tube, extraction system and tube Loading systems Vibrators Cabinets / Side panels / Top duct / Cabinet upper sections Platform Polycarbonate partitions Fire protection system with control console Further information regarding transport dimensions can be found in the attached packing list.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: nepreverjeno, številka stroja/vozila: 5.45.25.06, Brez najmanjše cene – zagotovljena prodaja najvišji ponudbi! Rok plačila za stroj je do 20.11.2025! Vsaka oddaja ponudbe zavezuje k pravočasnemu prevzemu med 01.12.2025 in 05.12.2025! TEHNIČNI PODATKI Premiki: X-os: 900 mm Y-os: 630 mm Z-os: 500 mm Območje obratov navpično in vodoravno: 5–5.000 obr/min Vpenjalo za orodje: SK 40/DIN 69871 Teža orodja: maks. 12 kg Premer orodja: maks. 200 mm Vpenjalna površina kotne mize: 1.200 x 600 mm Maksimalna teža obdelovanca: 500 kg Itedpfxoxnk Hbs Al Nef PODROBNOSTI O STROJU Krmilje: HEIDENHAIN TNC 407 Dimenzije (D x Š x V): 3.500 x 2.900 x 2.200 mm Teža: 4.100 kg Prostornina hladilne tekočine: 150 l OPREMA Tehnična dokumentacija Opomba: Transport poteka s standardnim tovornjakom.

Stanje: rabljeno, Leto izdelave: 1997, X-axis travel: 710 mm y-axis travel: 630 mm z-axis travel: 500 mm Spindle speed range: 5 - 5,000 rpm Spindle drive power: 11 kW Tool holder: SK 40 Tool changer: 44 tools Feed rate: 10 m/min Clamping area: 1,200 x 600 mm Isdpjlu N Hiefx Al Netf Table load capacity: 0.5 t Total power requirement: 15 kVA Machine weight approx.: 4.24 t Equipped with Heidenhain TNC 426 control, tool changer for 44 tools, flat guides on all axes, guides protected with wipers and steel covers. Heidenhain wired handwheel for easy machine setup.

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Iodpfx Alecxxq Dj Njtf Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 6766, x-axis travel: 560 mm Isdpocxxpqefx Al Njtf y-axis travel: 500 mm z-axis travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rates x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirements approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, številka stroja/vozila: KU 4165M, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 572 mm, pomik osi Y: 322 mm, pomik po osi Z: 265 mm, število mest v zalogovniku orodij: 22, največja hitrost vrtenja: 15.000 obr/min, The value of the supplied spare parts amounts to approx. € 70,000 TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: unlimited Remote Diagnostics: available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: parallel to main time, manual, with 3-axis handling or robot Part Feeding: paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-axis: 1,000 rpm Rotational Speed C-axis: 500 rpm Acceleration B-axis: 52 rad/s² Acceleration C-axis: 90 rad/s² Torque B-axis clamped: 1,000 Nm Torque B-axis unclamped: 287 Nm Torque C-axis clamped: 300 Nm Torque C-axis unclamped: 187 Nm Main Spindle Tool Holder: HSK 40-A Outer Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal Coolant Supply up to: 120 bar Spindle Distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Operation: pneumatic, 6 bar Tool Changer Tool Discs: externally presettable with position coding, diameter: Ø 290 mm Tools (2 discs with 12 positions each) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Iodexamh Espfx Al Njtf Max. Tool Diameter with Free Position: 105 mm Shortest Chip-to-Chip Time: ≥ 1 s Max. Weight of Tools on Disc: 15 kg Positioning Time per Tool Step: 250 ms Tool Holder: HSK 40-A, as per DIN 69893 MACHINE DETAILS Machine Dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per Machining Module: approx. 4.5 t Weight per Loading Module: approx. 2.5 t

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2001, obratovalne ure: 3.260 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 730, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 1.150 mm, pomik po osi Z: 685 mm, teža obdelovanca (maks.): 1.500 kg, največja hitrost vretena: 12.000 obr/min, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within the specified period from 01.12.2025 to 05.12.2025! TECHNICAL DETAILS Travel X-axis travel: 1,350 mm Y-axis travel: 1,150 mm Z-axis travel (vertical): 685 mm Z-axis travel (horizontal): 870 mm Spindle Working spindle: 0 – 12,000 rpm Acceleration time: approx. 2.5 s Tool holder: HSK-A63 Tool Data Tool magazine: 46-position changer Number of magazine slots: 46 Max. tool diameter (fully occupied): 80 mm Max. tool diameter (partially occupied): 130 mm Max. tool weight: 8 kg Max. tool length: 300 mm Max. magazine load: 200 kg Chip-to-chip time: 9–12 sec H/H Feed Rates and Rapids Rapid traverse X, Y, Z: 30 m/min Table NC rotary table diameter: 1,100 mm Clamping surface: Ø 1,100 x 1,000 mm Table load capacity: 1,500 kg Centering bore: Ø 50H6 Table height above floor: approx. 1,120 mm Swivel axis (A-axis): +15° to -120° Control: HEIDENHAIN TNC 426 MACHINE DETAILS Spindle hours: 3,260 h Machine on-hours: 82,797 h Dimensions & Weight Machine weight: approx. 12,000 kg Space required (L x W x H): 4,130 x 3,680 x 3,150 mm EQUIPMENT RENISHAW OMP60 probe Technical documentation Note: Transport will presumably be carried out on a truck with a 3,000 mm loading width. Iedpfx Aoxxzqrjl Njtf

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 6.191 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 7158, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, največja hitrost vretena: 15.000 obr/min, število mest v zalogovniku orodij: 46, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the successful bidder to collect the item within the specified period between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 slots Tool holder: ISO-B40 Travel Distances Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 600 mm Table NC rotary-swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Isdpfxoxxzpus Al Nstf Swivel Axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Controller: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine on-time: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the scope of delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the sale or delivery. The drive for the head swivel axis is missing.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site. Iedpfxsxu Hkco Al Netf

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Ijdpfjlnfggex Al Nstf Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.

Leto izdelave: 2005, stanje: zelo dobro (rabljeno), MIKRON HSM 400 U High-Speed Machining Center The exact scope of supply can be seen in the photo gallery. Included, among others: touch probe, oil mist separator, fire extinguishing system, chip conveyor, handling device, oil cooler, band filter system, approx. 50 HSK tool holders, etc. 1. TECHNICAL DATA Ijdpfsigrf Ijx Al Netf Work Area X-axis: 400 mm Y-axis: 450 mm Z-axis: 350 mm B-axis: ±110° C-axis: 360° Spindle Speed range: 100 – 42,000 rpm Tool holder: HSK E 40 Spindle power at 40% duty cycle: 13 kW Spindle power at 100% duty cycle: 10 kW Torque at 60% duty cycle: 4.25 Nm Torque at 100% duty cycle: 3.2 Nm Lubrication: oil/air Feed Rapid traverse speed: max. 40 m/min B-axis: 150 rpm C-axis: 250 rpm Axis acceleration, XYZ: max. 1g (10 m/s²) B-axis: 100 rad/s² C-axis: 300 rad/s² Tool changer: 68 positions Chip-to-chip time: 12.5 s Tool change time: 10.0 s Worktable: 120 mm Max. workpiece diameter (for full 360° rotation): 230 mm Max. workpiece height: 350 mm Max. workpiece weight: 25 kg Control system: Heidenhain iTNC 530 Weight: 5,500 kg No guarantee is given for the correctness, completeness or currentness of the information provided.

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 956.71.80.288, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, model krmilnika: HEIDENHAIN TNC 150, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj je na dražbi zaradi prenehanja poslovanja podjetja. Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik po X-osi: pribl. 300 mm Pomik po Y-osi: pribl. 300 mm Pomik po Z-osi: pribl. 300 mm Ijdsxqg Itepfx Al Nstf Orodni vpenjalni stožec: SK 40 Dimenzije mize: 1.000 x 500 mm, s 7 utori PODROBNOSTI O STROJU Krmiljenje: HEIDENHAIN TNC 150 Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 25 A Priključna moč: 10,5 kW Mere & teža Mere (D x Š x V): 2.500 x 2.400 x 2.200 mm Teža: 2.000 kg OPREMA Dokumentacija Vpenjalne glave Set končnih mer

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Itodpjtqqplefx Al Nof Spindle taper: SK 40 Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Stanje: rabljeno, Leto izdelave: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm Table clamping surface 1100 x 585 mm Rotary table diameter 500 mm Spindle taper SK 40 Spindle speeds 5 – 6300 rpm Spindle power 11 kW Number of tool magazine stations 2 x 22 Control HEIDENHAIN, TNC 426 Itodpfxetz Sqho Al Nsf Total power requirement 20 kW Machine weight approx. 5.8 t Accessories: various tool holders, RENISHAW OMP 60 probe, coolant system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 10.615 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 108.007.00.0065, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 900 mm, pomik po osi Z: 800 mm, obremenitev mize: 2.000 kg, največja hitrost vretena: 10.000 obr/min, Payment deadline for the machine is November 20, 2025! Submission of a bid obligates the winner to collect the machine on time, within the pick-up window from December 1, 2025 to December 5, 2025! Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm Iodpfxoxnkqas Al Nstf TECHNICAL DETAILS Working Areas Travel X-axis: 1,600 mm Travel Y-axis: 900 mm Travel Z-axis: 800 mm Feed Drive Feed rate X-axis: 14 m/min Feed rate Y-axis: 14 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 24 m/min Rapid traverse Y-axis: 24 m/min Rapid traverse Z-axis: 20 m/min Worktable Table dimensions: 1,700 x 850 mm Max. table load: 2,000 kg Number of T-slots: 7 T-slot spacing: 100 mm Distance spindle nose to table: min. 100 mm / max. 900 mm Spindle speed max.: 10,000 rpm Tool holder: ISO 40 Number of magazine slots: 30 Max. tool diameter without adjacent free slots: 85 mm Max. tool diameter with adjacent free slots: 150 mm Max. tool length: 305 mm Max. tool weight: 6 kg MACHINE DETAILS Control: HEIDENHAIN TNC 620 Dimensions & Weight Dimensions (L x W x H): 4,600 x 3,900 x 3,300 mm Weight: 16,000 kg Transport dimensions of the machine body (L x W x H): 4,500 x 2,900 x 3,200 mm The height can be reduced to 2,900 mm if required. Coolant system Capacity: 540 l Operating Hours Spindle hours: 10,615 h Power-on hours: 30,204 h EQUIPMENT 3D probing system Technical documentation

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WF 74 C TNC, dolžina podajanja os X: 900 mm, dolžina pomika po osi Y: 630 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 900 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 25 obr/min, skupna višina: 2.420 mm, skupna širina: 3.573 mm, skupna dolžina: 3.925 mm, širina mize: 600 mm, dolžina mize: 1.200 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Pomik po osi X: 900 mm Prečni pomik po osi Y: 630 mm Višinski pomik po osi Z: 500 mm Dimenzije vpenjalne površine mize (D x Š): 1200 x 600 mm Vpenjalni stožec glave rezkarja (ISO): ISO 40 Globina vrtanja: 100 mm Itsdpfx Aeyh Ahpjl Nof Maksimalno število hitrosti: 20 > 6300 obr/min Krmiljenje: Heidenhain

Stanje: dober (rabljeno), PLC krmiljenje, močnostni modul, LT-modul, E/R-modul, povratni modul -Proizvajalec: Siemens, Simodrive 611 E/R-modul INT. 36/47KW -Tip: 6SN1145-1BA02-0CA1 Ijdpfswcyk Uox Al Notf -Dimenzije: 310/200/V480 mm -Teža: 15 kg

Stanje: rabljeno, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Isdpfx Ajkzpm Hel Netf -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300 VA -Primary: 3x380 V -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Stanje: rabljeno, PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board, circuit board Itedpfsrc Ilgjx Al Nof - Manufacturer: Mikron, electronic module printed circuit board from CNC milling machine Mikron UME 600 - Type: 958 78 11 200 - Dimensions: 145/110/H55 mm - Weight: 0.4 kg

Stanje: zelo dobro (rabljeno), PLC control, electronic modules, PLC module, plug-in card PCB, printed circuit board Isdpfx Aok Aua Nol Notf -Manufacturer: Mikron, electronic module PCB for h. TCD22 Ovp -Type: WW TCD 22 . 104.73.20.041 -Carton dimensions: 410/310/H65 mm -Weight: 0.6 kg

Stanje: rabljeno, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Itedpfekyy Uqex Al Nof - Manufacturer: Bosch, three-phase transformer, removed from CNC milling machine Mikron WF 51C/155 - Type: 100-911637 - Power: 4.5 kVA - Primary: 3x380 V - Secondary: 3x95/165 V - Dimensions: 335/135/H350 mm - Weight: 41 kg