Mazak 27 Stück Angetriebene & Starre Werkzeuge nakup rabljenega (5.649)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Ponujamo dve zelo dobro ohranjeni parni kotli Bosch UL-S 14000, letnik 2014. Rcjdszg Nt Dspfx Altod Proizvajalec: 2 kosa Bosch Tip: 2 kosa UL-S 14000 Leto izdelave: 2014 Za vprašanja ali dodatne informacije nam lahko pošljete sporočilo ali nas pokličete.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, obratovalne ure: 4.220 h, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: Matrix Nexus, širina mize: 550 mm, dolžina mize: 1.300 mm, največja hitrost vretena: 12.000 obr/min, število mest v zalogovniku orodij: 30, število osi: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II was manufactured in 2008. It is equipped with a Mazatrol Matrix Nexus control and has a total operating time of 17,659 hours. The machine comes with advanced software options, including high-speed smoothing control and various machining cycles. If you are looking for high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II vertical machining center we have for sale. Contact us for further details. - Total operating time: 17,659 hours 12 minutes 03 seconds (recorded on 2026/02/19) - Automatic cutting time: 6,129 hours 38 minutes 37 seconds - Automatic machining time: 5,877 hours 48 minutes 01 seconds - Power-on time: 26,902 hours 54 minutes 33 seconds - Feed override display: 50% - Feedrate display: 150 mm/min - Electric drives/servo system: Mitsubishi Electric MDS Series (400V system) - Additional system interfaces: Renishaw Machine Interface MI12 (integrated in cabinet for probing system) - Safety module: Mazak safety relay module (QS-VMI100R-10) Rcodsy T Hbzspfx Alted - Installed options (software/NC options enabled): * EIA/EIA 3D Comp. / EIA Helical Tap Cycle / EIA Pattern Cycle * High smoothing control * Spiral * Rotation * Geometric * Scaling * Ext-Data I/O * Inverse time * Auto TLM * Polar coordinate input * Compare stop * G54.1 * Sync. thread milling / sync. main spindle tapping * Inch/MM conversion * G00 constant pitch * Scale feedback * Variable 600 sets * IC card operation * Inclined working plane * Rethreading * Pitch error compensation * Tap retract - Coolant/hydraulic accessories: External coolant tank base with dual motor pump unit and filtration system (including a manual sight glass for pressure/bypass filter) - Extraction accessories: Equipped with a flexible, corrugated overhead extraction hose (connection for mist/fume extraction hose) - The machine is fitted with through-spindle coolant (IKZ) and a 30-station tool magazine Technical specification: Through-spindle coolant: Yes

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Mere stroja: 2,9 m x 2,8 m x 2,9 m Teža stroja: cca. 7 t. Leto izdelave: 2006 Hodi osi: X 1050, Y 530, Z 510 (150 nad mizo) Število obratov: max. 12.000 1/min. Motorska vretena: SK40 Merilna tipala: Renishaw OMP 60 Merilna sonda: Mazak IKZ: 25 bar Zunanje hlajenje Revija za orodja: 30 mest Verižni transporter ostružkov Krmilnik stroja: MAZATROL M640 • Po en stroj v levi in desni izvedbi (odvod ostružkov levo ali desno) • Različni nosilci orodja lahko se dokupijo. • BREZ vpenjalnih naprav (primeži)! Redpey Tlu Tefx Altocd • BREZ odsesovanja Navedena cena velja samo za en stroj.

Stanje: dober (rabljeno), Leto izdelave: 2020, 5-axis CNC machining centre – universal – Manufacturer: MAZAK Machine model: Variaxis J-500 Control: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travels - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary axis, rotary/swivel table): (degrees) 360 Feed X/Y/Z: (mm/min) 8,000 Rapid traverse - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 deg./min. Spindle - Max. spindle speed: (rpm) 12,000 - Drive power (S3 100 / 40): (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table rotary swivel table Pallet system - Pallet changer: 2-fold - Clamping table dimensions: (mm) 500 x 400 Rotary swivel table Rjdpfxey Txrxs Altocd - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + ICS (internal coolant supply) 70 bar + Hinged belt chip conveyor + Oil mist extraction + Tool length measurement and breakage control + Additional interior lighting + Signal light (3-colour) Specifications and details may be subject to change and error.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 187859, premer struženja: 380 mm, največja hitrost vretena: 5.000 obr/min, največja hitrost vrtenja: 4.500 obr/min, prehod palice: 65 mm, skupna masa: 4.900 kg, Mazak QTN-200MS CNC stružno-frezerski centar, godina proizvodnje 2006, sa dodatnom (sup) vretenom i pogonjenim alatima. Glavno vreteno Kitagawa stezna glava i Hainbuch prirubnica za steznu čauru, 35–5000 obrtaja/min. Pomoćno/suprotnovreteno Kitagawa stezna glava, 35–6000 obrtaja/min. Rjdpoy Tb D Dsfx Altjcd Ukupno 19 držača alata, od čega 5 sa pogonom. Stezne čeljusti, stezne glave, ključevi i dodatna oprema prikazana na slici su uključeni u cenu. Revolver sa 12 pozicija. Hvatač gotovih delova, transporter za strugotinu. >>Uvlakač šipki FMB SL80 V (godina 2020) >>Transportna traka Mašina je vrlo pažljivo održavana i servisirana. Hidraulično ulje, maziva i radne tečnosti su nedavno zamenjeni. Mašina se može pogledati u radu pod opterećenjem. Model: QTN-200MS Serijski broj: 187859 Težina: 4.900 kg (10.780 lbs) Godina proizvodnje: 2006 Ako imate pitanja ili vam je potrebno više informacija, slobodno nam pošaljite poruku ili nas pozovite.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, potovalna razdalja osi X: 1.120 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, proizvajalec krmilnikov: MAZATROL, model krmilnika: PC-Fusion-CNC 640M, skupna višina: 2.651 mm, skupna širina: 2.825 mm, obremenitev mize: 800 kg, skupna masa: 6.000 kg, največja hitrost vretena: 10.000 obr/min, moč vretenovega motorja: 15.000 W, število mest v zalogovniku orodij: 24, teža orodja: 8.000 g, največja dolžina izdelka: 2.915 mm, število osi: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It offers an impressive X-axis travel of 1120 mm, a Y-axis travel of 510 mm, and a Z-axis travel of 510 mm. The machine features a robust table measuring 1460 x 510 mm with a maximum table load of 800 kg. If you are looking for a high-quality milling machine, consider the Mazak VTC 200 B vertical machining center, which we are offering for sale. Contact us for further details. • Machining Capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot spacing: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW Rcedoy S Sw Sspfx Altsd • Maximum torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed: • X: 8 m/min • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max. tool diameter with adjacent tool: 80 mm • Max. tool diameter without adjacent tool: 110 mm • Max. tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow rate: 20 L/min • Electrical Data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard Equipment: • Full enclosure • Through-spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk drive • CE-compliant machine • Preparation for side chip conveyor • Note: The machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2002, obratovalne ure: 48.651 h, Mazak Space Gear-510 MKII 2.5 kW Rcsdpfx Alewqr Tdetjd Year of manufacture: December 2002 – fully refurbished! Very good condition! Operating hours: 48,651 hours Control system: Fanuc L-64

Stanje: rabljeno, Leto izdelave: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm Pallet size 1240 x 550 mm Number of pallets 2 Workpiece weight 800 kg Spindle taper ISO 40 Spindle drive 5.5 kW Speed range 28 - 4000 rpm Number of tool magazine stations 30 Rcodpfotqqk Iox Alted Control MAZATROL M 1 Total power requirement kW Machine weight approx. 5.6 t Space requirements approx. 4.50 x 3.00 x 2.65 m Accessories: chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2016, Mazatrol – gladko upravljanje, Velikost mize 600 x 500 mm, Nosilnost mize 500 kg, Gibanje po osi X, Y, Z; 510 x 910 x 510 mm, Najmanjša – največja razdalja med vretenom in mizo: 70 – 580 mm, Os C: 0,0001 stopinje, Os A: -120 ~ +30 stopinje, Moč vretena: 22 kW, Hitrost vretena: 12.000 vrt/min, Avtomatski menjalnik orodij s 30 mesti, Stožčastost vretena: DIN 40, hladilno sredstvo, Rcjdpfozibazox Altjd Hlajenje skozi vreteno.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 2-osni CNC stružnica MAZAK QTN 100II Mazatrol Matrix Rcodpjyvzwvsfx Altsd Vpenjalna glava za puše Prehod vretena 45mm Dolžina struženja 310mm Premer struženja 280mm X-190mm Z-330mm Vreteno max 6000 vrt/min Glava z 12 pozicijami -Orodna sonda -Konjiček -Lovilnik kosov -Vmesnik za podajalnik palic Z napravo je: -Transporter odrezkov Mayfran z zbiralnikom in črpalko za hladilno tekočino -Dokumentacija

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.200 mm, Oprema: dokumentacija / priročnik, Mazak Quick Turn Nexus 350M CNC stružni center z Mazatrol 640T Nexus CNC krmilnikom Letnik: 2004.11 Dolžina struženja: 1.200 mm Maks. premer obdelovanca: 750 mm Standardni obdelovalni premer: 336 mm Maks. obdelovalni premer: 420 mm Premer prehoda palice: 102 mm Maksimalno število vrtljajev vretena: 4000 obr/min 12-pozicijski revolverski nosilec orodja Kitagawa 12-palčna hidravlična triosna vpenjalna glava Konjiček Teža stroja: 7.500 kg Vključeno več različnih držal orodij v revolverju, 4 x gnana držala orodij in dodatna oprema. Oprema: 4 x gnano orodje Rodpfx Alex Dccyetocd Mazak držalo orodij Transporter ostružkov

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. Rcodpjfdkb Tofx Alted We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm Rsdpfx Aled Tbbdjtocd - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Rsdpfsd Tqalox Altscd - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth Rsdpfxefdkb Us Altecd - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. Rcsdpsguk A Hofx Altjd The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing Rodpfxjguk Dks Altjcd - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany Rcjdpfofdkbhjx Altjd - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. Rcodpfx Aeguk Dveltjd For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, potovalna razdalja osi X: 560 mm, pomik osi Y: 410 mm, pomik po osi Z: 510 mm, skupna višina: 2.778 mm, obremenitev mize: 500 kg, skupna masa: 4.920 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 18.500 W, število mest v zalogovniku orodij: 30, število osi: 3, Ta 3-osna Mazak VCN410 je bila izdelana leta 2006. Ima X-hod 560 mm, Y-hod 410 mm in Z-hod 510 mm. Dimenzije mize so 900 x 410 mm, največja obremenitev mize pa je 500 kg. Če iščete visokokakovostne možnosti obdelave, razmislite o vertikalnem obdelovalnem centru Mazak VCN410, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Dimenzije mize: 900 x 410 mm • Stožec vretena: št. 40 (CAT 40) • Hitri pomiki (X/Y/Z): 36 m/min • Vreteni motor: AC 18,5/15/11/7,5 kW Rcsdpfxsy R D N Re Altsd • Napajanje: 3-fazno, 200 V, 50 Hz • Nazivna moč: 28,3/23,32 kVA • Stisnjen zrak: 5 bar / 200 l/min • Tloris: 2.000 x 2.600 mm • Serijska oprema: poplavno hlajenje, nadzor trajanja orodja, delovna svetilka Dodatna oprema • Transporter za odrezke (tečajni tip) • Rezervoar za hladilno tekočino • Lopata za odrezke

Stanje: rabljeno, Leto izdelave: 2015, Mazak, vertikalni obdelovalni center Smart 530C, vretenasti obdelovalni center s krmilnikom Mazatrol Matrix 2. Serijska številka: 259026 (2015), velikost mize: 1300 mm x 550 mm, največja hitrost vretena: 12.000 vrt/min, 30-mestni bobenski avtomatski menjalnik orodij, opremljen z različnimi držali za orodja in tipalko Renishaw, stožčasta vretena CAT40, transportni sistem za odrezke LNS Turbo MH500, teža stroja: 6800 kg, uporabniški priročnik na CD-ju. Država izvora: Združeno kraljestvo. Lokacija: Te serije se nahajajo v Gatesheadu, Združeno kraljestvo. Na žalost na lokaciji ni na voljo možnosti za nakladanje, zato bodo stroški razstavljanja in nakladanja breme kupca. Vsa/vsako orodje se ponuja, kot je posebej opisano. Rsdpsznllxofx Altscd

Stanje: rabljeno, Leto izdelave: 2015, Stroj Mazak Vertical Centre Smart 530C, CNC vertikalni obdelovalni center z nadzorno enoto Mazatrol Matrix 2. Serijska številka: 264426 (2015), velikost mize: 1300 mm x 550 mm, največja hitrost vretena: 12.000 vrt/min, 30-mestni boben za orodja, opremljen z različnimi držali za orodja in tipalko Renishaw, konus vretena CAT40, transporter za odrezke LNS Turbo MH500, teža stroja: 6800 kg, uporabniški priročnik na CD-ju. Država izvora: Združeno kraljestvo. Lokacija: Te serije se nahajajo v Gatesheadu, Združeno kraljestvo. Na žalost na lokaciji ni možnosti za nakladanje, zato bo razstavljanje in nakladanje v strošek kupca. Vsa/morebitna orodja so ponujena, kot je posebej opisano. Rjdsznlllepfx Altscd

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 1.889 h, laserska moč: 2.000 W, najv. debelina jeklene pločevine: 15 mm, maks. debelina pločevine iz nerjavečega jekla: 8 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been very well maintained, regularly cleaned and serviced. It is in as-new condition! TECHNICAL DETAILS Laser power: 2,000 W Laser source manufacturer: IPG Laser type: Fiber laser Max. sheet thickness: 15 mm Max. steel thickness: 15 mm Max. stainless steel thickness: 8 mm Working length: 3,000 mm Working width: 1,500 mm Positioning accuracy: 0.001 mm MACHINE DETAILS Control type: CNC control Control manufacturer: Mazak Cooling type: Water Degree of automation: Automatic Drive type: Electric Input voltage: 380 V Input current type: Three-phase Laser on-time hours: 8,212 h Cutting hours: 1,657 h Year of last overhaul: 2024 EQUIPMENT Rsdpfx Aey Tvzkoltocd CE marking Documentation/manual Safety light barrier Pallet changer Exhaust system

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 2.000 mm, Strojenje in struženje na CNC stroju Mazak Model: E-650H Krmilnik: Mazatrol 640M Pro Letnik: 2004 Razdalja med centri: 2000 mm Največji premer obdelovanca: 905 mm Stroj je opremljen z: Os C Rcsdpfezlhp Iex Altjd Os Y Orodje, ki se vrti Os B Vpenjalna glava s pnevmatskim vpenjanjem, premer 800 mm Podpora za obdelovanec, ročno nastavljiva, dolžina 375 mm Odprta podpora za obdelovanec, dolžina 600 mm Sistem za hlajenje z zračnim curkom

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 41.417 h, Mazak Hyper Gear 510 4.0 kW Year of manufacture: February 2007 Operating hours: 41,417 Control system: MAZATROL Condition: very good Technical specifications of the MAZAK HYPER GEAR 510 laser cutting machine: - Laser power: 4 kW - Travel in X/Y/Z axes: 3070/1545/100 mm Rsdpowqr Twofx Altecd - Table dimensions (L x W): 3000 x 1500 mm - Maximum workpiece weight: 930 kg - Maximum workpiece dimensions (L x W x H): 3050 x 1525 x 25 mm - Laser type: CO2