Linearni Vibracijski Pogon 669 Mm nakup rabljenega (88.287)

Stanje: rabljeno, Battenfeld Plasticizing Screw Ø 18 mm – as new - Removed from Battenfeld VM75/60/60 R1040 - Taken from a running machine - Fully functional Inlet: 17.80 mm Center: 17.80 mm Outlet: 17.80 mm Stroke volume: 22.9 cm³ Gedpfou Tv A Dox Abrekc Injection pressure: 2,593 bar Manufacturer: Battenfeld Type: Ø 18 mm Spare part no.: 100TM842 Condition: as new

Stanje: rabljeno, Leto izdelave: 2018, skupna masa: 230 kg, nosilnost: 5 kg, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Gedpfxsxgu S Ss Abrskc Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 10.631 h, nosilnost: 1.400 kg, dvižna višina: 5.316 mm, vrsta goriva: električni, tip droga: triplex, lastna masa: 1.550 kg, prevoženi kilometri: 10.631 km, THREE UNITS IN STOCK This electric TRIPLEX stacker from the brand Still, built in 2015, is in good condition. The capacity is 1,400 kg. The stacker lifts up to a height of 5,316 mm. Drive-through height: 2,265 mm. Equipped with FREELIFT. Fitted with INITIAL LIFT, making it ideal for uneven floors. The battery features an automatic filling system and an external charger. Schedule an appointment for a test drive. Watch the video on YouTube. Gkjdpowa Ac Ujfx Abrsc FINANCIAL LEASE POSSIBLE, Calculation is subject to credit approval and changes in interest rates and fees, final calculation via our external partner*

Stanje: pripravljen za uporabo (rabljen), Grundig 665RI merilni trak ML 770 mm SN:78-95201, rabljen, običajne sledi uporabe, 100% delujoč, dobava po fotografijah. Gsdpfji Eacwjx Abrokc

Stanje: pripravljen za uporabo (rabljen), Mapal MN5364-08-KF raztezna vpenjalna glava DIN 69882-7 z aksialno nastavitvijo dolžine Ø 16 mm DIN4000-89-HSK – nosilec s votlim stožcem, rabljeno, običajne sledi uporabe, 100 % funkcionalno, obseg dobave po slikah. Godpfxji Eb Abj Abrjkc

Stanje: kot nova (razstavni stroj), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0605.1283, TEMA flat vibrating screen Type OZB 90/360-55. Drive: 2x Unbalance motors P = 2.1 kW. Screen deck width: 900 mm. Length: 3,600 mm. Including support frame (as shown in the picture). In good condition, low operating hours. Always used as a demo/test screen. Gsdpfsqwclqsx Abrokc Available immediately.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. Gjdpfomhhf Sjx Abrekc When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Gedpfjmhhl Hjx Abrjkc Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. Gkodomhh Dtspfx Abroc When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments Gkodpfomidyfjx Abrjc - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, premer valja: 50 mm, širina valja: 600 mm, kotalkanje nagibanje: 75 mm, skupna širina: 690 mm, skupna višina: 290 mm, skupna dolžina: 6.000 mm, transportna dolžina: 6.000 mm, gradbena širina: 690 mm, gradbena višina: 290 mm, Št. art.: 1000006074.1 Valjčni transportni sistem, pogonjen – 6.000 mm Tehnični podatki: Proizvajalec: TGW Leto izdelave: 2006 Celotne dimenzije: 6.000 x 480 x 290 mm (D x Š x V) Širina transportnega traku: 400 mm Vrsta valjev: jekleni valji Razdalja med valji: 75 mm Premer valjev: 50 mm Motor z reduktorjem: vključen Hitrost: 0,5 m/s Stanje: rabljeno / popolnoma delovno Gedoiuzwgopfx Abrokc Preizkus delovanja: V redu OPCIJSKO: Nosilci (višina po želji), Stranski vodniki, Zaščita robov, Frekvenčni pretvornik, Gumb za izklop v sili

Stanje: rabljeno, Four in a Row – The Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions WE OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Gkedpsvdqhbjfx Abroc Our sales team will be happy to prepare a non-binding quote tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. The stated price refers to the unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, located in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for commercial, industrial, and trade applications. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us.

Stanje: pripravljen za uporabo (rabljen), Gebruikte blikproductielijn voor de productie van blikken van 73 mm of 99 mm. Verschillende samenstellingen van machines beschikbaar. Bestaat uit: - Krupp Sdvt duplexslitter Godsvy Tyxjpfx Abrskc - Soudronic FBB400 lasmachine - Soudronic poedercoatsysteem voor de binnenzijde - Buitenlakinstallatie - Frei uithardingsoven - Metalbox 65d spin-flanger - FMI A304 kraalwals - FMC 652 sluitmachine

Leto izdelave: 2025, stanje: novo, Ultrazvočna kad UEC 300 je industrijska rešitev za čiščenje velikih in težkih delov, ki so močno umazani. Naprava je opremljena s pnevmatskim dvigalom s kapaciteto do 200 kg. Delovna frekvenca znaša 28 kHz s sweep tehnologijo. Stroj obsega glavno ultrazvočno kad s tremi stranskimi ultrazvočnimi piezo pretvorniki ter dodatno nadglavno kad z oljnim separatorjem. Upravljanje poteka preko visokokakovostnega HMI zaslona na dotik z 3D prikazi obvestil. Celotna kad je izdelana iz kislinsko odpornega nerjavečega jekla AISI304 s debelino 2 mm. Tehnične lastnosti: Dimenzije platforme: 900x570 mm Največja nosilnost: 200 kg Uporabna višina: 400 mm Ultrazvočna moč: 3 kW (6 kW p-p) Ultrazvočna frekvenca: 28 kHz s sweep funkcijo Moč grelca: 9 kW OPREMA: Gksdpegd Uifofx Abrjc 7" zaslon na dotik z 3D obvestili Avtomatski sistem za polnjenje vode Avtomatski način delovanja dvigala Senzor nivoja tekočine Senzorji položaja dvigala Senzor pokrova Garancija: 2 leti NA ZALOGI IMAMO TUDI DRUGE MODELE

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Stroj za upogibanje cevi BB 76 brez vodila - Model BB 76 - Zmogljivost upogibanja do okroglih cevi 76 x 4 mm (jeklo St 37) - Digitalni prikazovalnik - Programirljiv kot upogibanja - S pedalom za upravljanje z nogo Gkedpfx Aodihnuebrjc - Delovna hitrost 1–3 vrt/min - Motor 4 kW, 400 V, 50 Hz, trifazni - Ojačana gred - Delovna plošča CK 45 - Teža 600 kg - Dimenzije 600 x 1100 x 1000 mm

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical data for the pallet rack beam: Racking system: Redirack Included in the scope of delivery: 01x Pallet rack beam, used Color: yellow U-profile: 100 x 50 mm Design: End beam Clear span: 2,707 mm 02x Locking pins, used Version: fully galvanized For securing the longitudinal beams Prevents unintentional lifting General information about this item: This item is offered for collection only. Should you require transport or shipping of this item, additional costs will apply, which can be requested separately depending on the place of delivery and scope of supply. Our range of services: Gkedpfx Abjh S H N Uerjc (Prices on request) Assembly, installation Our general assembly conditions must be observed. Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems. Delivery with our own fleet (unloading not included)

Stanje: zelo dobro (rabljeno), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for the wide-span racking beam: Racking system: Stow Type: Midirack Scope of delivery: 01x Wide-span racking beam, used Material color: yellow ZM profile: 75 x 30 mm Beam type: MNZBG 2274 Gksdpfx Ash A Hxqsbrjc Connector: 2 HK (hooks) Clear span: 2,700 mm 02x Safety pins, used Version: fully galvanized For securing the longitudinal beams against unintentional lifting Note: The beams are designed to accommodate chipboard panels with a thickness of approx. 22 mm General information about the item: This item is offered for collection only. Any transport or shipping of this item is subject to additional costs, which can be quoted separately depending on delivery location and volume. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635 performed in compliance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: skoraj kot novo (rabljeno), Expected stock: approx. 840 units. We are offering here a second-choice lattice girder from the manufacturer SSI Schäfer for purchase. Technical data for the lattice girder: Racking system: SSI Schäfer Type: PR 600 Scope of delivery: 01x lattice girder, second-choice Gjdpfeh Eg Agjx Abrokc Material finish: Sendzimir galvanized Total length: approx. 1,270.0 mm Center-to-center hole: approx. 1,230.0 mm Profile dimensions: C 40 x 30 x 8 mm Hole diameter: approx. 11 mm Material thickness: approx. 1.25 mm Weight per unit: approx. 1.35 kg General information about the item: This item is only offered for collection. If transport or shipping of this item is required, it will incur additional costs, which can be requested individually from us depending on the delivery location or scope of delivery.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles Godpfx Absh Ek Daorskc - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), We offer you here a second-choice deep beam (Tiefensteg) from manufacturer SSI Schäfer for sale. The deep beam is suitable for an upright depth of 1,250 mm and a maximum cross beam width of 55 mm. The scope of delivery includes: 01x deep beam, used Manufacturer: SSI Schäfer Material color: RAL 5010 blue Gksdpfx Aeh Et Aqsbroc Total length: approx. 1,264 mm for upright depth: approx. 1,250 mm Cross beam support: approx. 63 mm Clear support width: approx. 1,130 mm Profile dimensions: U-profile 50x50x3 mm Weight: 4.58 kg | each General information about the item: This item is only available for collection. Delivery or shipping of this item is subject to additional costs, which can be provided upon request depending on delivery location and scope.

Stanje: novo, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Scope of delivery includes: 01x Workbench frame, new Material color: anthracite Overall width: approx. 1,400 mm Overall height: approx. 900 mm Overall depth: approx. 600 mm 01x Worktop, new Overall width: approx. 1,400 mm Overall depth: approx. 600 mm Notes: - Workbenches are picked and supplied unassembled General information about the item: This item is offered for collection only. Should transportation or shipping of this item be required, additional costs will apply, which can be quoted separately depending on delivery location and scope. Gjdpfx Absh Euqlsrskc Overview of our services: (Prices on request) Assembly and installation Please observe our general assembly conditions Racking inspection Racking inspection according to DIN EN 15635 carried out in accordance with the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Stanje: rabljeno, SCM Sandya RT 1100 Kalibracijski stroj Valj + Blazinica, širina traku 1100 mm. Stroj je delujoč in preizkušen. Transportni trak v odličnem stanju. Gedpfexcu Skox Abrjkc

Stanje: dober (rabljeno), Tehnični podatki o paletni regalni prečki: Regalni sistem: Metall Sistem Tip: Unipal Vsebina dobave: 01x paletna regalna prečka, rabljena Barva materiala: rumena Škatlasti profil: 140 x 45 mm Čista širina: 1.800 mm Vaše kontaktne osebe pri nas: Godpfx Absxb Tp Eerekc G.: Andre Evering G.: Mario Klöver G.: Falk Deutsch Splošne informacije o izdelku: Ta artikel je na voljo samo za osebni prevzem. Kakršen koli transport ali pošiljanje tega izdelka je povezan z dodatnimi stroški, ki jih je mogoče posebej preveriti glede na kraj dostave oz. obseg dobave.

Stanje: dober (rabljeno), Jeklena nosilec, jekleni nosilec HEB, dvojni T-nosilec, jekleni nosilec IPB, jeklena stebrična opora -Jekleni nosilec: HEB 140 mm z zgornjo in spodnjo ploščo -Skupna dolžina: 4280 mm -Spodnja plošča: 300 x 300 x 25 mm Godew Du Hyjpfx Abrekc -Zgornja plošča: 200 x 250 x 20 mm -Širina nosilca: 140 mm -Globina nosilca: 140 mm -Debelina prirobnice: 12 mm -Debelina stene: 7 mm -Stanje: dobro, glede na slike -Število: na voljo 25 jeklenih nosilcev -Cena: na kos -Teža: 171 kg/kos

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, vrtilni razpon: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head, orthogonal design • Milling head clamping range: 360 x 1° • Milling head swivel range: 180 x 1° • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Intermittent: 36 – 6,000 rpm Automatic tool changer • Tool magazine for 48 tools Coolant system • Tank capacity: 500 l About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance - Machine overhaul - CNC control upgrades Gsdpfxsxgq Ayo Abrjkc ----- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large component machining - large machining - CNC large-part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine