Izdelana Plošča Za Prešo Z Diatermičnim Oljem nakup rabljenega (101.892)

Stanje: rabljeno, prevoženi kilometri: 394.650 km, moč: 278 kW (377,97 KM), prva registracija: 08/2011, vrsta goriva: dizel, lastna masa: 10.950 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/80 R22,5, konfiguracija osi: 4x2, medosna razdalja: 4.900 mm, gorivo: dizel, barva: oranžna, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, dolžina tovornega prostora: 6.200 mm, višina nakladalnega prostora: 2.580 mm, Oprema: ABS, dodatne luči, dvižna zadnja plošča, nadzor oprijema, nizka raven hrupa, parkirni grelec, spojka prikolice, spojler, tempomat, zapora diferenciala, Urea tank (AdBlue) Displacement: 10,837 cc EBS (Electronic Braking System) Ppodpfx Aaju Hgzgo Djt Light alloy rims Euro EEV 1 Payload: 7,050 kg Automatic climate control Dinkel swing-wall box body type ADKLLW Bär tail lift type BC 2000 S4 Alcoa aluminum rims Sun visor 1 sleeper bunk Air and electrical connections for trailer operation Subject to errors and omissions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, skupna širina: 1.500 mm, skupna dolžina: 1.200 mm, skupna višina: 3.500 mm, skupna masa: 7.000 kg, Število T-utorov: 14 Razmik med T-utoroma: 250 mm Dimenzija T-utora: 28 mm Število ustreznih kosov: 2 Dolžina: 1200 mm Psdpfx Aaexhgfmj Djpt Širina: 1500 mm Višina: 3500 mm Teža: 7000 kg

Stanje: zelo dobro (rabljeno), skupna masa: 4.600 kg, skupna višina: 305 mm, skupna dolžina: 4.000 mm, skupna širina: 1.640 mm, Dolžina: 4000 mm Pjdpjy D Ngnefx Aa Dspt Širina: 1640 mm Višina: 305 mm Število T-utorov: 5 Razmak med T-utori / korak: 330 mm Velikost T-utora: 28 mm Število ustreznih kosov: 1 Dolžina: 4000 mm Širina: 1640 mm Višina: 305 mm Teža: 4600 kg Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po naših najboljših močeh in, kjer je bilo mogoče, neposredno od proizvajalca. Podatki so podani v dobri veri, natančnosti pa ni možno zagotoviti. Tako ti podatki ne predstavljajo zavezujoče predstavitve ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Leto izdelave: 2000, skupna dolžina: 4.000 mm, skupna širina: 2.500 mm, višina plošče: 320 mm, Length: 4000 mm Width: 2500 mm Ppodpfewwr Unox Aa Dst Height: 320 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, skupna masa: 6.000 kg, skupna višina: 300 mm, skupna dolžina: 4.000 mm, skupna širina: 2.000 mm, višina plošče: 300 mm, širina plošče: 2.000 mm, 8 kosov preciznih izravnalnih klinov BILZ PK4/72 Dimenzije: 200 × 200 × 80 mm Nosilnost: 38.000 N/kos Območje izravnave: +5 do −7 mm Dolžina: 4000 mm Širina: 2000 mm Višina: 300 mm Število T-utorov: 6 Ppodpfx Aajy Efqxo Det Razmak T-utorov / korak: 320 mm Velikost T-utora: 36 mm Teža na ploščo: pribl. 6000 kg Število ustreznih kosov: 1 Dolžina: 4000 mm Širina: 2000 mm Višina: 300 mm Teža: 6000 kg Prosimo, upoštevajte: Informacije na tej strani smo po najboljšem vedenju zbrali sami in, če je bilo mogoče, pridobili od proizvajalca. Podani podatki so v dobri veri, vendar njihove točnosti ni mogoče zagotoviti. V skladu s tem ne predstavljajo zastopanja ali pogodbenih pogojev. Priporočamo, da vse pomembne podrobnosti sami preverite.

Leto izdelave: 2011, stanje: kot nova (razstavni stroj), številka stroja/vozila: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage as follows: Nominal capacity: 10 m³ Quantity: 1 Used, but fully refurbished; the tank is cleaned, overhauled, primed, and painted. Paint finish: RAL color of your choice. Material: Steel-in-steel, Material S235JRG2 Pedpfx Ajcl Sb Rsa Djpt Documentation: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and type plate Design: Cylindrical, horizontal, on two welded saddle feet (Ground clearance approx. 100 mm) Monitoring interstitial space of double wall with filled leak detection fluid. Tank dimensions: Length: approx. 5,350 mm + 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: - 500 mm manhole with cover, bolts, and seal - 2" fill pipe with TW cap (from 20 m³ = 3") - 1¼" suction pipe - Dipstick and dipstick closure, tank level indicator - 1½" vent connection with cap - Overfill prevention device with type approval - Leak detection gauge (visual) = LAS with leak detection fluid filled - Access ladder for side mounting, supplied loose Tank approved for use outside earthquake/flood zones. Diesel fuel dispensing station with data management Type: HDM80eco LTE 75 l/min Cloud-based basic module free of charge You can see who refueled, when, where, and how much Fueling transactions are carried out via tank key or PIN entry Filling/dispensing area Type: KAP system, galvanized Base area with drive-on ramps (mm): approx. 2,650 x 5,300 Base area without ramps (mm): approx. 2,500 x 5,000 Basin height (mm): approx. 60 - Nationwide general construction approval - Permitted: installation outdoors and in buildings (outdoor installation with hinged cover and through conduits) - 2 collection trays, each with 150 l capacity ===== Top offer: Liquid fertilizer – AHL tank systems from 10,000 to 100,000 liters. Of course, you can also help design your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer cost-effective delivery on request. You are welcome to inspect our systems at any time. Other tank systems for above-ground and underground storage in all sizes are available for sale at our premises. Have we convinced you with our offer? If you have any questions or specific requirements, simply call us – one of our experienced staff will be happy to assist you. Price/Shipping The price for the filling station applies ex works Warstein, free loaded. Delivery can be offered at an additional reasonable cost. Delivery time: by arrangement You will receive an invoice with VAT shown separately. In addition, we purchase existing tank systems and, as a certified specialist company pursuant to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Best regards, from Warstein Tank-Umweltschutz Wozniack

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 7.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 365591, delovno območje: 4.250 mm, potovalna razdalja osi X: 2.200 mm, pomik osi Y: 4.250 mm, pomik po osi Z: 200 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, maks. debelina aluminijaste pločevine: 100 mm, FLOW stroj za rezanje z vodnim curkom IFB-12 – vodna rezalna naprava Prodajamo naš stroj za rezanje z vodnim curkom Flow z dodatnim posebej izdelanim vodnim bazenom iz nerjavečega jekla. Primerno za živilsko / industrijsko / kemično uporabo Stroj je bil pri nas v uporabi 2 leti. Prodajamo zaradi nakupa novega, ne gre za nujno prodajo. Stroj je v zelo dobrem stanju Popolnoma delujoč Proizvajalec: Flow Leto izdelave: 2006 Tip: IFB Model: IFB 12‘ Base Serijska št.: 365591 Laserski tip: Renishaw Transportne mere Žepi za viličar: 17x10 cm Skupna višina: 220 cm Skupna širina: 480 cm Skupna dolžina: 450 cm Bazen Dolžina: 425 cm Širina: 255 cm Tehnični list naprave je na voljo (PDF na zahtevo) Ogled pred nakupom je možen in zaželen. Dostava po dogovoru. Pedjy D A Ifspfx Aa Dept Prodaja se v trenutnem stanju, kot je prikazano na slikah.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, dvoredna vrstna vrtalna stroj GANNER z 21 vreteni v vsaki vrsti Ppedpfx Asxlt T Soa Det

Stanje: rabljeno, Leto izdelave: 2003, skupna dolžina: 3.000 mm, skupna višina: 1.700 mm, skupna širina: 1.000 mm, Barva: Bela Lastna teža: 1.000 kg Cena: Po dogovoru - Leto izdelave: 2003 - Dokumentacija na voljo: Da Ppodpfxjxwuwvj Aa Djt - CE oznaka prisotna: Da - CE certifikat prisoten: Ne - Serijska številka: 30058 B - Največja delovna širina [mm]: 1320 - Najmanjša prehodna višina [mm]: 3 - Največja prehodna višina [mm]: 100 - Število valjev [kos]: 2 - Transportne mere: 3000mm x 1000mm x 1700mm (d x š x v) - Transportna teža [kg]: 1000kg - Število transportnih paketov [kos]: 1 Finančne informacije DDV: Navedena cena je brez DDV DDV/Maržna obdavčitev: DDV je odbit za podjetja Dostava in odkup sta možna kadarkoli za vse iz industrijskega področja Yorick Diebels

Leto izdelave: 2023, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN-22-1409, For sale is a high-quality extraction unit from the brand Absaugwerk, year of manufacture 2023, specifically designed for the capture and filtration of welding dust (e.g., aluminum dust). The unit complies with the latest technical standards and includes: Equipment: • Downdraft extraction table • Integrated wet separator according to current safety standards • Suitable for professional use in welding operations • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: near new, fully functional Collection by the buyer; assistance with dismantling/transport can be arranged if required. If you are interested or have any questions, please feel free to send me a message. An on-site inspection can be arranged by appointment. Other metalworking machines available, such as bench drilling machines, press brakes, pillar drilling machines, eccentric presses, heavy-duty shelving, welding tables, MIG/MAG welding units, compressors, etc. – please also see my other listings. Domestic price net plus VAT or Ppsdpfx Aox Da Tisa Dot Net export price Pick-up only – dismantling and transport by the buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Additional photos and technical details available on request. All information is provided without guarantee or warranty. Subject to prior sale and errors. For further questions, please call. Nous parlons francais / Мы говорим по-русски We speak English / Noi vorbim româneşte Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. We can transport vehicles to the port for an additional fee.

Stanje: dober (rabljeno), Groove bed for WEINIG Unimat 23 four-sided planer with 6 spindles. Used condition. Ppodpsunbuvjfx Aa Det

Leto izdelave: 2016, stanje: rabljeno, Stroj za šivanje s sukancem Müller Martini Ventura MC Leto izdelave: 2016 Ppedpfoyzzwajx Aa Det Opis: - Krmilnik z zaslonom na dotik - Samodejna nastavitev - ASIR optično zaznavanje pol: ASIR 3 - 4 + 4 možnosti odpiranja - Ločevalnik knjižnih blokov - Zlagalnik knjig - Venturi Air

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 13.727 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.8/60, natančnost pozicioniranja: 0,05 mm, pritisk: 4.130 letvica, obratovalni tlak: 4.130 letvica, hitrost rezanja: 12.000 mm/min, skupna masa: 2.000 kg, CNC Opal Waterjet Cutting Machine – 4130 bar Waterjet System | PTV-JET 37 kW High-pressure pump with accessories for precision waterjet cutting machines Model: Opal Waterjet Year of manufacture: 2005 Isbq N Eewt Ah Rj E Rdjau Total operating hours: 13,727 h Included equipment: - High-pressure pump PTV-JET 37 kW (working pressure: 4130 bar) - Oil cooler - Basic high-pressure fittings - High-pressure gauge Pedpowt Ah Rofx Aa Dspt - High-pressure valves: manual and pneumatic - Abrasive dosing unit - Abrasive pressure transport system - CNC control panel for machine operation - Dual cutting head with diamond orifice Offer does not include: - Work table - Cutting tank Technical data: - Working pressure: 4130 bar - Pump motor power: 37 kW - Maximum water flow: 3.79 l/min - Working width: 1000 – 4500 mm - Working length: 1000 – 10,000 mm - Maximum cutting speed: 12,000 mm/min - Positioning accuracy: ±0.05 mm - Unit dimensions: approx. 3 m x 2 m - Net weight: approx. 2000 kg Applications and benefits: - Material cutting: • All types of steel and alloys • Temperature-sensitive materials (plastics, composites) • Multi-layer and difficult-to-machine materials • Natural materials (marble, granite), glass, ceramics - No thermal effect on the processed material - Precise CNC control over cutting and pump operation - Environmentally friendly technology – no emission of harmful substances - Possibility of integration with existing infrastructure (table, cutting head) Additional information: - Machine decommissioned from production, fully assembled and ready for shipment - Complete technical documentation available - Location: Tarnowskie Góry, Poland - Device demonstration possible upon prior arrangement

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 13.209 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 50 t, širina odprtine za polnjenje: 1.250 mm, dolžina polnilne odprtine: 1.050 mm, širina bale: 100 mm, višina bale: 700 mm, teža bale: 500 kg, skupna masa: 8.500 kg, kapaciteta rezervoarja za olje: 400 l, moč: 15 kW (20,39 KM), leto zadnje generalne obnove: 2026, volumenski pretok: 108 m³/h, Technical data – Baler: Manufacturer as per nameplate: BRAMIDAN (original manufacturer: Presto GmbH & Co. KG) Model: HC 50 (equivalent to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 units Press force: 50 t Specific press force: 650 kN/m² Feed hopper dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/h Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total power consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: 30 kg/m³: approx. 3.1 t/h 60 kg/m³: approx. 4.5 t/h 100 kg/m³: approx. 7.2 t/h Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 L PLC control: Siemens S7-200 Effective transport dimensions (excluding chute): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (baler): 8.5 t Condition of the baler: The baler was previously used exclusively in a production environment for baling cardboard and has been regularly serviced. With only 13,209 operating hours, the machine has seen comparatively low use. The baler has undergone partial refurbishment and final testing in our workshop. The following refurbishment work was performed: - Machine cleaned - Bale retainer freed and lubricated - Photoelectric sensor renewed - Twisting unit completely disassembled, all bearings and plastic guides replaced, lubricated, and chain tension adjusted - Knives and counter-knives removed, sharpened, and reinstalled Ppodpfxey R Npco Aa Dot - Knife gap re-adjusted - General maintenance work carried out and grease points serviced Scope of delivery: - 1 baler with wire roll boxes, without wire (6850 x 1950 x 2650 mm) - 1 bale chute (5100 x 1150 x 450 mm) - 1 wire roll box for floor mounting (1450 x 380 x 360 mm) A tautliner (curtain side truck) with an effective internal height of 2700 mm is required for transport of the baler. Remarks: Full documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is included. Inspection by appointment possible. We accept no liability for technical data or for possible errors or omissions.

Stanje: zelo dobro (rabljeno), Panel Saw Paoloni P 300 with Scoring Unit | 3200mm Sliding Table, Italian, 790kg Description: For sale: A professional, classic panel saw from the renowned Italian manufacturer PAOLONI, model P 300. This machine features an extremely heavy cast iron and steel construction (weighing 790 kg), ensuring exemplary stability, rigid geometry, and excellent vibration damping during operation. It's a proven, mechanically reliable design without unnecessary, failure-prone electronics—ideal for craft carpentry workshops and furniture production. ⚙️ TECHNICAL DATA FROM NAMEPLATE: Manufacturer: Paoloni (Fano - Italy) Model: P 300 Year of manufacture: 1997 Serial number: 0602 Supply voltage: 380 V (Three-phase) Frequency: 50 Hz Motor power (KW): 4.75 kW Current consumption: 11 A Machine weight: 790 kg 💎 MAIN FEATURES AND EQUIPMENT: Long Aluminium Sliding Table: Ensures smooth, light feed and high cutting precision. The table length allows effortless panel sizing of full-format boards (cutting length approx. 3200 mm). Scoring Unit: Essential for clean cutting of laminated boards, chipboards, and MDF—guarantees chip-free cuts on the underside of the material. Precise Geometry Adjustment: Manual, reliable lifting/lowering of the main saw blade and tilt angle adjustment (range 0°–45°) via an ergonomic handwheel with dial indicator. Stable Side Table: Constructed on a robust, telescopic support arm with a long crosscut fence and two flip stops for repeatable series cuts. Parallel Fence: Rigid mounting on a solid steel bar, ensuring repeatable dimensions on the right side of the blade. 📐 WORKING PARAMETERS (Standard for the P 300 series): Cutting length: approx. 3200 mm Cutting width with right-hand fence: approx. 1150 mm Max. diameter of main blade: 300 mm - 350 mm Cutting height: up to approx. 100 - 115 mm (depending on blade used) 🛠️ TECHNICAL CONDITION: Ppodpoy Tzqksfx Aa Det Complete machine, in good visual and technical condition. Ready for immediate operation in the workshop.

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), delovna širina: 620 mm, številka stroja/vozila: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive system is hydraulic, supported by positioning and control systems. The machine features its own vacuum pump. Low operating hours (approx. 6,800 h). Usable heating element area: width 600 mm x depth 400 mm Max. part dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. upper part height: 350 mm - Max. lower part height: 350 mm (Combinations of part heights are possible, depending on contour.) - Max. operating temperature for contact process: 400°C The machine’s modular frame allows for easy retrofitting. Side and front doors in the welding area can be easily opened for simple retooling. The automatic safety lift door offers a high level of operator safety. Temperature controllers on the control panel display both actual and set values. The operating panel is a Siemens PLC control unit. Machine control is managed via Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety shutoffs in case of overtemperature. Pin systems in the tool clamping surfaces enable reproducible positioning. Advantages of heating element welding technology: - Secure welding of workpieces with low or varying wall thicknesses - Low rejection rates due to precise and reproducible weld joints Pedpfoykvdlsx Aa Dept - Sensitive parts can be welded thanks to precise time, temperature, and force control - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility must be verified) Technical specifications: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 wires, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with control panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with control panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with safety door fully raised: approx. 2.85 m (door open) Machine weight: approx. 2.2 t

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, skupna masa: 700 kg, skupna dolžina: 900 mm, skupna širina: 2.100 mm, skupna višina: 2.200 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 5 letvica, električna varovalka: 20 A, Der Ringtester ist für die automatische Rissprüfung an ringförmigen Bauteilen wie Lagerringen und Zahnrädern mit dem eddyvisor C konzipiert. Zusätzlich können Kunden Schleifbrand an Innen- und Außenringen von Wälzlagern prüfen. Hierfür übernimmt ein Roboter das Handling und führt den Sensor entlang der Konturen des Prüfteils. Pedpfx Aeyx E D Eea Dopt Die Anlage prüft mit bis zu zwei Sonden. Alle relevanten Scanparameter sowie die Kommunikation zur Ansteuerung des eddyvisor C sind im Roboter-Scanprogramm integriert. Herzstück des Systems ist der eddyvisor C Wirbelstromprüfgerät mit zwei Kanälen zur zuverlässigen Riss- und Schleifbranddetektion. Die Prozessautomatisierung erfolgt durch einen integrierten Stäubli TX2-60 Roboter. Das gesamte System wird über einen Schaltschrank mit integriertem Steuer- und Bedienpanel gesteuert und bedient. Eine vertikale Spindel mit Spannfutter fixiert jedes Prüfling während der Inspektion sicher. Ausgeschleuste n.i.O.-Teile (NOK - not okay) werden automatisch auf zwei spezielle NOK-Ablagebahnen sortiert. Ein separater Lagerplatz für Referenz- und Masterteile unterstützt die Kalibrierung und laufende Qualitätssicherung während der Prüfung. Das System ist mit dem Optical Reflection Sensor von ibg (iORS) für präzise, berührungslose Inspektion von Ringen ausgestattet.

Stanje: rabljeno, Stroj za zgibanje Heidelberg Stahlfolder TD 66/6-4-4 z okroglim podajalnikom. Leto izdelave: 1996 - Serijska št.: 66748/95-225117. Največja delovna širina: 660 mm. Tip zgibanja: 6 - 4 - 4. Izmet v toku. Priložena navodila za uporabo. Spletni video-pregled preko WhatsApp, MS Zoom ali Telegram. Na zalogi v Emskirchen/Nürnberg – Na voljo takoj – Možnost preizkusa. Podjy Akwrjpfx Aa Djpt

Stanje: dober (rabljeno), Leto izdelave: 2003, ELB Rotary 40 NC-K okrogla ploščinska brusilka s premerom mize 400 mm, višina brušenja 300 mm, leto izdelave 2003, upravljanje ELN NC-K, moč vretena 4 kW, brusilni disk 300 x 50 x 76,2 mm, vrtljiva miza z magnetno vpenjalno ploščo premera 400 mm, popolna ohišje, hladilni sistem s papirnatim tračnim filtrom, možno preizkusiti pod napetostjo, z veseljem prevzamemo tudi postavitev/usposabljanje ter kasnejši servis na lokaciji! Financiranje/leasing, ni problema, z veseljem pripravimo ponudbo! Pjdpouiafuefx Aa Dept

Stanje: rabljeno, Glava za rezanje navojev BILZ tip DSPL 127 MK2 Velikost navoja: M3 - M12 Vpenjalni steblo: MK 2 Dolginska kompenzacija: 30 mm Območje vpenjanja: Ø 2,5 - Ø 10 mm (premer stebla navojnega svedra) - Vpenjanje stebla navojnega svedra in prenos navora preko štirikotnika - Nastavljiva varnostna sklopka za omejevanje navora - Dolginska kompenzacija +10 mm / -20 mm za natančno rezanje navojev Največji premer glave: Ø 58 mm Dolžina glave: 120 mm Ppsdpfoy E T Daox Aa Dot Skupna dolžina s steblom: 215 mm Lastna teža: 1,7 kg Zelo dobro ohranjeno

Stanje: rabljeno, Hidravlični vpenjalni cilinder za upravljanje vpenjalnih glav Primeren za Gildemeister GDM 42 Prehodni vpenjalni cilinder RÖHM SZS 45/92 559 Ident. št.: 414096 Tov. št.: 7069 Delovni tlak: maks. 40 bar Ppsdjy E T A Aepfx Aa Det Št. obratov: maks. 7000 obr/min Premer bata: 125 mm Premer batnice: 62/53 mm Hod bata: 25 mm Notranji premer v cilindrični cevi: 45 mm Hidravlični vpenjalni cilinder za odpiranje in zapiranje avtomatskih vpenjalnih glav. Za hidravlično upravljanje vpenjalnih glav ali vpenjalnih tulec. Prehodni vpenjalni cilinder za hidravlično upravljanje vpenjalnih glav/tulec s prehodom.

Stanje: rabljeno, moč: 155 kW (210,74 KM), vrsta goriva: dizel, barva: rumena, tip droga: dupleks, Leto izdelave: 2018, obratovalne ure: 11.999 h, Leto izdelave: 2018 Pogon: Kolesni Število valjev: 4 Dovoljeno skupno maso: 46.000 kg Znamka nadgradnje: LIEBHERR LH 50 LITRONIC CE-označba: da LIEBHERR LH 50 M LITRONIC RAVNALNI BAGER LETO 2018 SKUPNA TEŽA 46.000 KG DOSEG 20,0 M CE-STROJ MOTOR D934 A7-04 MOČ 155 kW / 210 KM MEDOSNA RAZDALJA CM ODMIK OD TAL CM ŠIRINA PODVOZJA CM 4-TOČKOVNE OPERE HIDRAVLIČNO DVIGLJIVA KABINA 3. IN 4. HIDRAVLIČNA NAPELJAVA INDUSTRIJSKI RAVNI MONOBOOM Z INDUSTRIJSKI DRŽAJ, KONICA KONCA POD KOTOM 5-PRSTNI GRABILNIK VEČPRSTNI GRABILNIK KAPACITETE 1,10-1,70M3 ŽERJAV JE PRIPRAVLJEN ZA DELO Podpfx Aaoy T Rdgo Dopt GOVORIMO NEMŠKO WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, stopnja avtomatizacije: samodejen, vrsta aktuacije: električni, proizvajalec krmilnikov: SUDA, model krmilnika: Raytools, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Raycus, model laserskega vira: Raycus 6000W, valovna dolžina laserja: 1.064 nm, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, maks. debelina pločevine iz nerjavečega jekla: 16 mm, maks. debelina aluminijaste pločevine: 14 mm, maks. debelina medeninaste pločevine: 8 mm, najv. debelina bakrene pločevine: 6 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, skupna dolžina: 8.450 mm, skupna širina: 2.950 mm, skupna višina: 2.320 mm, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, FIBER LASER CUTTING MACHINE MTP F-6000 – 6000W High-performance fiber laser cutting machine for precise sheet metal processing. The MTP F-6000 model combines a robust machine design with high-quality components, ensuring excellent cutting quality, high working speeds, and long service life. The machine is equipped with a 6000W laser source, an autofocus cutting head, and CNC control. It is ideal for manufacturing operations, metal fabrication, and industrial workshops. The heat-treated frame construction ensures high stability and long-term precision. Main features: - 6000W laser source - Autofocus cutting head - CNC control - Linear guides - Helical rack and pinion - Heavy-duty machine construction - Automatic lubrication system - Water cooling - Protective enclosure Advantages: - High productivity and cutting speed - Very good cutting quality - Low operating costs - Easy operation - High reliability in continuous operation Applications: - Steel construction - Sheet metal processing - Automotive industry - HVAC and ventilation - Production of enclosures and metal parts Cutting capacity (6000W): - Mild steel: up to approx. 25 mm - Stainless steel: up to approx. 16 mm - Aluminum: up to approx. 14 mm Standard equipment: - 6000W laser source - Autofocus cutting head - CNC control - Cooling unit - Extraction system - Work table - Protective enclosure Pjdpfx Aajyv Dx Ao Dopt Optional equipment: - Air compressor - Extraction system - Shuttle table

Stanje: dober (rabljeno), Leto izdelave: 1996, Linija za kvašeno pecivo Rondo Compactline - rabljena Ppsdpsyglg Uofx Aa Dst - leto izdelave 1995-96 - sestavni deli: delovna miza Compactline, kalibrator, rezalna postaja, postaja za vlaženje, polnilka, valj, postaja za zvijanje, giljotina, sprejemna miza, 4 rezalni valji, 3 okrasni elementi - dolžina 7,70 m - konstrukcija iz nerjavečega jekla - ročno upravljanje - stroj iz proizvodnje - na željo lahko izvedemo generalno obnovo - prevzem iz skladišča - cena na povpraševanje

Stanje: rabljeno, We offer used pallet racking here. TECHNICAL DATA Manufacturer: SLP Frame height: approx. 10,900 mm Frame profile: SL 25 Frame depth: 1,100 mm Profile dimensions: 100 x 85 x 2.5 mm Adjustment pitch: 70/70 mm Colour: blue The uprights are pre-assembled (bolted truss design) Beam width: 2,830 mm (clear span) Beam type: RTS Box profile: 110 x 50 mm Colour: orange Load capacity per shelf: 3,000 kg per pair of beams PRICES Starter bay: €595.10 net (2 frames + 10 beams) Extension bay: €382.55 net (1 frame + 10 beams) VOLUME DISCOUNTS Starter bay 1 - 5 units: €595.10 net Starter bay 6 - 20 units: €571.30 net Starter bay 21 - 50 units: €547.49 net Starter bay from 51 units: €523.69 net Extension bay 1 - 5 units: €382.55 net Extension bay 6 - 20 units: €367.25 net Extension bay 21 - 50 units: €351.95 net Extension bay from 51 units: €336.64 net Psdpey Dgdwofx Aa Dept PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be coordinated in case of order. Prices are per unit/net prices, or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Should you have any questions, please feel free to contact us.