Horizontalni Stružnice Weiler E35 1997 nakup rabljenega (6.970)

Stanje: rabljeno, Leto izdelave: 2000, Použitý soustruh CONDOR AC, čiastočne repasovaný Výška hrotu: 165 mm Vzdialenosť medzi hrotmi: 750 mm Priemer vretienového otvoru: 40 mm Otáčky vretena: 22–2 800 ot./min plynule nastaviteľné - Rýchloupínací držiak Multifix, veľkosť B Nodpex E Um Nefx Ah Uoct - Digitálny odmeriavací systém WEILER DZ-V - Priechodný doraz vretena - Pevná luneta - 7 kusov Multifix držiakov - Plochý ochranný kryt proti rozstrekovaniu - Elektricky istený kryt skľučovadla - Prevodové kolesá a rôzne upínacie čeľuste Stroj je čiastočne repasovaný: - Lôžkový suport: Vodiace dráhy nanovo potiahnuté a zaškrabané, klinové lišty a upínacie lišty prispôsobené - Priečny suport na ložiskovom suportoch zmeraný a nastavený. Priečny suport s rybinovým vedením novo zaškrabaný, kliny prispôsobené a zaškrabané - Horný suport novo zaškrabaný, klinová lišta prispôsobená - Všetky odmeriavacie pravítka repasované, káble vymenené Stroj sa nachádza v našom showroome v 71334 Waiblingen-Beinstein a je ihneď k dispozícii. Ohľadom vybavenia nás prosím kontaktujte.

Stanje: rabljeno, številka stroja/vozila: 1717, used lead and feed screw lathe WEILER PRAKTIKANT Ncodpfjuqb Emsx Ah Uet Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, 1 piece 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 holders Lever-operated collet chuck system with 15 collets. The machine is located at our site in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Stanje: dober (rabljeno), Razdalja med konicama: 450 mm Višina konic: 120 mm Vreteno izvrtina: 23 mm Število vrtljajev: 40 – 3000 min⁻¹ Brezstopenjski pogon s 3 predstopnjami in digitalnim prikazovalnikom števila vrtljajev Nasadni konjiček: MK 2 Pogon: 1,5 kW Teža: 350 kg Dimenzije: 1200 x 650 x 1330 mm Barva: Resedino zelena RAL 6011. Digitalni prikazovalnik: Po želji ob doplačilu Dodatna oprema: Dodatna oprema na zahtevo Nsdpfx Ahew I A Uxe Ujct

Stanje: rabljeno, Leto izdelave: 1995, Swing diameter: 720 mm Ncsdjyqvbdopfx Ah Ujt Turning length: 3,000 mm Control: Siemens 805 Swing diameter over support: 430 mm Speed: 1,800 rpm Tailstock quill taper: MK 6 Steady rests: 3 units Main drive motor: 36 kW Z-axis travel: 3,050 mm X-axis travel: 410 mm Swing diameter over cross slide: 430 mm Spindle drive: 28 kW Workpiece weight: 3,000 kg Spindle bore: 106 mm 3-jaw chuck diameter: 305 mm Total power requirement: . kW Machine weight approx.: 6 t Space requirement approx.: 4x2.4x2 m Steady rest 1: diameter: 120-300 mm Steady rest 2: diameter: 220-400 mm Steady rest 3: diameter: 350-500 mm Chuck: diameter: 315 mm The technical data are provided by the manufacturer or operator and are therefore non-binding for us. Prior sale reserved; only our terms and conditions of business and sale apply. About us: - More than 400 own machines in stock - Over 15,000 m² warehouse space, crane capacity 70 t - Over 10,000 accessories and spare parts for your workshop If you are looking to sell machines, production lines, or your company, please contact us. You can find further offers on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Stanje: rabljeno, Model 110 kW / 150 KM. Stroj je bil predhodno obnovljen. Odličen za mletje celih zamrznjenih blokov itd. Ncodpfxeywpcie Ah Ujt

Stanje: dober (rabljeno), npr. primerno za visoko zmogljiv vodilno in vlečno vreteno stružnico WEILER 300 ali drugo Za izvrtine vretena s premerom 38 mm z nosilcem, vlečno cevjo in vpenjalnimi tuleci Ø 1, 2, 3, 4, 5, 6 (2x), 7, 8, 9, 10, 11, 13, 14, 16, 18, 19, 20, 21, 22, 23, 25 mm in za kvadrat □ 6, 8, 10, 12, 16 mm, 1 konična konica s sprejemnikom za vpenjalne tulece … Siegfried Volz Orodjarni stroji Nedpfew Sfitsx Ah Uoct Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), Drehlänge 800 mm Ncsdpfx Aexmaktoh Ust Drehdurchmesser über Bett 330 mm Drehdurchmesser über Support 170 mm Drehzahlbereich 24 - 1900 U/min Spindelbohrung 38.0 mm Spitzenhöhe 165 mm Gesamtleistungsbedarf 3.5 kW Maschinengewicht ca. 850 kg. Raumbedarf ca. 1850 x 800 x 1700 mm aus einer Berufsschule - guter Zustand (!!) besonders geeignet für mittlere Präzisions-Drehteile - im überprüften Zustand - Maschinenvideo - ?v=GDoJ0Z7Dckw Ausstattung: - robuste Leit-/Zugspindel Drehmaschine - HEIDENHAIN 3-Achs Digitalanzeige "VRZ 770" - RÖHM Dreibackenfutter Ø 160 mm - klappbarer Drehfutterschutz - Futterschlüssel - TRIPAN-Stahlhalter mit 3x Einsätzen - verschiebbarer Reitstock - schwenkbare Maschinenleuchte - Bedienfeld, vorne links - automatische Vorschübe für Plan- und Obersupport - Maschinenuntergestell, mit Schranktür (Staufläche) - Spänespritzschutz-Rückwand - 1x leerer Werkzeugschrank - NOT Aus Taster - Bedienungsanleitung

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Nedpsvrcqdjfx Ah Ujct For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: Nedpfevrckqex Ah Usct >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard Nodpfx Aov Tyzcoh Usct >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws Ncjdpsvv Etvjfx Ah Uot >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev Ncodpfsvrdlcox Ah Uet >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: Njdowrm Dtopfx Ah Ujct >> Machine No.: 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws Njdpfswthbiox Ah Uect >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: dober (rabljeno), WEILER COMMODOR L&Z stružnica iz vojaške zaloge Bundeswehra - Dobro ohranjen, pripravljen za uporabo - Premer struženja 180 mm - Dolžina struženja 1000 mm - Prehod palice 56 mm - Območje vrtljajev 25 - 2000 obr/min - Navoji / metrični / colski itd. - Avtomatski vzdolžni in prečni pomiki - Konjiček MK 4 - Trivpenjalno vpenjalo 250 mm - Električna zaščita vpenjala - Osnovni nosilec Multifix in vložki - Naprava za hlajenje - Zadnja zaščita za ostružke - Dokumentacija stroja Dimenzije: D x Š x V 2,5 x 1,3 x 1,7 m / Teža: 1500 kg Nsdpfjykknfjx Ah Ujct Napake in spremembe pridržane

Leto izdelave: 1973, stanje: zelo dobro (rabljeno), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, subject to prior sale and errors, from stock: W E I L E R Precision Machinist Lathe Ncedpjxpxqwjfx Ah Ujt Model MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning Ø over cross slide 140 mm Max. swing Ø over bed 260 mm Between centres 500 mm Spindle bore 28 mm Range 1 – Speed range: 220–1,800 rpm Range 2 – Speed range: 110–3,600 rpm Spindle drive kW Total power kW - V - Hz Weight 500 kg Accessories / Special features • Equipped with a 3-jaw chuck from RÖHM, 110 mm Ø, mounted • Machine base with integrated tool storage and comprehensive accessory package, including collet sets Condition : Very good – ready for demonstration. Ideal for training workshops, maintenance, etc. Please click here for a video of the machine : MDU260/4 Delivery : ex-stock – as inspected Payment : strictly net on collection – after receipt of invoice

Stanje: rabljeno, Leto izdelave: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you the following ex-stock, subject to prior sale and errors: W E I L E R LZS - Universal Lathe with Digital Readout Model: PRIMUS VC Year of manufacture: 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special Equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis, and additional Z-axis (compound slide) • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, 140 mm diameter, mounted • Machine base for tool storage with integrated control cabinet, coolant system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex-stock – as inspected Payment : strictly net upon collection – after receipt of invoice Nedpovm Dv Djfx Ah Ujct We look forward to receiving your order. Further lathes of all sizes in stock – please feel free to enquire.

Stanje: dober (rabljeno), Leto izdelave: 1988, 1 rabljeni stružnica z vodilnim in vpenjalnim vretenom Proizvajalec: Weiler Tip: 160 B Leto izdelave: 1988 Nedpfx Ahew Sdr Hs Ujct Tehnični podatki Razdalja med konicama: 650 mm Premer obdelave nad posteljo: 320 mm Premer obdelave nad prečnim suportom: 192 mm Višina konic: 160 mm Premer vretena: 40 mm Nazivna moč: 2,4 / 3 kW Hitrosti vrtenja: 48 – 2500 obr/min Dimenzije: pribl. D 2,20 x Š 1,10 x V 1,40 m Teža: pribl. 1 t Oprema Digitalni prikazovalnik Heidenhain Glava Multifix z različnimi vložki 3-čeljustna glava Nujna zaustavitev

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1992, Lathe WEILER Precision Center Lathe in Ergonomic Design The Weiler Ergodor is the first German lathe designed with an ergonomic concept. It provides a more humane workplace and helps prevent health issues. The key feature: the operator can use this lathe both standing and sitting. Technical Data Distance between centers: 470 mm Turning length: 430 mm Center height: 145 mm Swing diameter over cross slide: 160 mm Swing diameter over bed: 300 mm Spindle head, short taper flange Bayonet mount DIN 55022 Size 5 or Camlock mount D 1-ASA-4 Spindle bore: 36 mm DIN 55022 Size 5 spindle internal taper Spindle speeds Speeds: 30 – 3550 rpm S Speeds: 15 – 3550 rpm Brake motor 3 kW Brake motor 1.5/3 kW Cross slide travel: 150 mm Top slide travel: 100 mm Feeds and thread pitches on the gearbox selectable in 30 steps Section 2 1.5/3 kW 38 Gearbox reduction: 3 20 Longitudinal feeds: 150 mm via change gears, 100 mm via toothed belt Ncjdpfsvgqu Hox Ah Uot Face feeds = 1/2 longitudinal feed rates Metric threads: 0.2 – 12 mm Module threads: 0.1 – 4 Dimensions: 1450 x 640 x 1500 mm Net weight: 1000 kg Acceptance as per toolmaker's accuracy to DIN 8605 20 Built according to occupational safety regulations, official test no. A. EM 11 1545/80. Dimensions (French: Encombrement): 1450 x 640 x 1500 mm

Stanje: dober (rabljeno), Distance between centres: 800 mm Nsdpfxsukrtnj Ah Ujct Spindle bore: 38 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle speed: 24–2800 rpm Dimensions: 1600 mm x 600 mm x 1250 mm Weight: 850 kg

Stanje: novo, Schinfa MachineREVISIE has been the specialist for overhauls for more than 27 years. All work is carried out in-house. We are able to grind up to 2700 mm. Njdpjfhnr Ijfx Ah Uect We restore machines precisely according to DIN standards. We can overhaul your existing machine or supply you with one of our own machines.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Premična luneta za Weiler E 50, letnik 2020. V zelo dobrem stanju. Nedpfxeyfnwms Ah Usct Vpenjalni razpon: 12 - 125 mm.

Leto izdelave: 2010, stanje: skoraj kot novo (rabljeno), We offer the following accessories for the Weiler E30 lathe: 1x Faceplate Schunk 250mm, Price: €600 Spindle nose DIN 55027 size 5 2x Faceplate Röhm 260mm, Price per piece: €650 Spindle nose DIN 55027 size 5 1x Travelling steady, Price: €450 Ncedjgabvnjpfx Ah Ujt 2x Driving flanges, Price per piece: €210 Spindle nose DIN 55027 size 5 All parts are in very good condition.

Stanje: dober (rabljeno), Konvencionalni stružnica WEILER COMMODOR B iz izobraževalne ustanove -GS - identifikacija -3-osni digitalni prikazovalnik "NOVO" -Višina konic 180 mm -Razdalja med konicama 1000 mm -Skozi vreteno 56 mm -Obrati vretena 15 - 2000 min⁻¹ -Avtomatski vzdolžni in čelni pomiki Nodpfx Asyf U E Dsh Ujct -Navojni postopki / metrični / colski / modul / diametralni -Električna zaščita vpenjalne glave -2x nujni izklop -Multifix z vložkom -Štiriprvemna vpenjalna glava - Röhm -Zadnja stena za ostružke -Naprava za hlajenje -Zelo lepo ohranjen originalni stan -Dokumentacija Dimenzije: DxŠxV 2,3x1,2x1,7 metra / Teža 1600 kg Možne so napake in napačni vnosi podatkov.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, As-New Condition, Year of Manufacture 2019 Technical Data: >> Year of Manufacture: 2019, Machine No. OD08 >> Center height: 160 mm >> Swing over bed: 320 mm >> Swing over cross-slide: 190 mm >> Distance between centers: 650 mm >> Spindle speeds from 30 to 4000 rpm (stepless) >> Spindle bore: 43 mm >> Camlock spindle nose, DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Number of feeds: 24 >> Longitudinal feed: 0.02 to 0.63 mm/rev >> Cross feed: 0.006 to 0.2 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 1150 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L) x 1.7 m (H) x 0.89 m (D) Accessories and Equipment: >> Weiler digital position display >> Collet chuck system, new collets from 3 to 26 mm >> 160 mm three-jaw chuck with one set of jaws Ncodpfx Aew Swkvsh Ujt >> Multifix size B quick-change tool post with 3 holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts list For safety: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Position Display: >> 8-inch color screen >> 3 axes for bed, cross-slide, and compound slide >> 99 tool memory >> Oriented spindle stop >> Option to input constant speed or cutting speed >> Feed and thread settings displayed >> Thread cutting with electronic stop About the Machine: Offered is a Weiler Praktikant VCD precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2019, in as-new condition and original paint. The machine is, of course, fully functional and equipped with new collets and chuck. Take advantage of the opportunity to inspect this machine under power on site and see its condition for yourself.