Center stružnica

Weiler Praktikant VCD

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as new, no signs of wear, including new maintenance and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guide length: 350 mm Bed width: 205 mm Turning tool section (height x width): 20 x 20 mm Hedpfx Agjx I Rtksxjl Height from top slide to centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: Metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight, without packaging and accessories: approx. 1150 kg Length / width / height, net: 1720 x 890 x 1700 mm Headstock / rear panel / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Stanje: rabljeno, Leto izdelave: 2009, Cutting diameter: 15 – 560 mm Cutting range at 90 degrees: flat 560 x 630 mm Saw blade dimensions: 7,400 x 54 x 1.60 mm Hjdpsvxwkfefx Agxel Control system: KASTO Material feed – single stroke: 900 mm Multiple feed length max.: 9,999 mm Minimum cut-off length: 6.00 mm Saw motor: 5.50 kW Cutting speed: 13 – 127 m/min Material support height: 700 mm Total power requirement: 12.00 kW Machine weight approx.: 6.00 t Space requirements approx.: 3.70 x 2.50 x H2.50 m Two-column automatic bandsaw with KASTO Compact Control; frequency-controlled saw drive; minimum quantity lubrication; swarf conveyor; powered infeed conveyor 6m + 3x short roller conveyors 1m each; outfeed conveyor 2m; machine can be inspected under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: used, very good, as new, incl. new service and measurement protocol before sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Hsdpfx Aex Ivy Nsgxsl Top slide swivel range: +/-65° Bed saddle guide length: 350 mm Bed width: 205 mm Tool cross-section (height x width): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle nose to ISO DIN 702-3 (DIN 55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle internal taper: 50 metric Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gearbox stages: 1 Number of spindle speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill internal taper: 3 MT Weight, without packaging and accessories: approx. 1150 kg Dimensions (L x W x H), net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety guard: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Overhauled BRUDERER high-speed stamping press BSTA300 incl. new press control system Technical specifications: ----- Press force: 300 kN Die installation opening: 750 mm Stroke rate: 80–1,400 (depending on selected stroke) Hsdetvnlbepfx Agxsl Adjustable stroke: 13, 16, 19, 25, 32, 38, 44, 47 mm Ram adjustment range: 51 mm Tool installation height: 171–239 mm (depending on selected stroke) Bolster plate: 740 x 480 mm Ram area: 630 x 360 mm Strip passage width: 206 mm Base plate opening: 710 x 160 mm Strip feed height: 50–120 mm Strip travel direction: left to right Feed unit: servo feed Machine weight: approx. 5,150 kg Machine color: RAL 1013 pearl white Attachment color: RAL 7016 anthracite Control cabinet color: RAL 7035 light grey

Stanje: zelo dobro (rabljeno), Weiler Primus VC Precision Centre Lathe with 3-axis HEIDENHAIN digital readout (new generation) with VC drive, stepless speed control, and CE certification, in geometrically as-new condition Technical Data: Year of manufacture: 1999 Machine No.: 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short-taper spindle nose to DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Tailstock quill travel: 40 mm Longitudinal feeds: from 0.02 to 0.63 mm/rev Cross feeds: from 0.005 to 0.2 mm/rev Metric threads: from 0.25 to 8 mm Module threads: from 0.2 to 4 mm (19 positions) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories & Features: Hodpfjyglk Hsx Agxjl - 3-axis HEIDENHAIN digital readout (newer generation) - RPM display - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Spindle brake switchable - Operating manual - Machine lamp This machine originates from a vocational school and is in exceptional, near-mint condition. Thanks to its safety equipment and renowned WEILER precision, the machine is ideally suited for training purposes as well as for tool and machine construction. Note to all private buyers: The machine price is well into the five-figure range.

Stanje: rabljeno, Leto izdelave: 2006, Technical details: X travel: 800 mm Y travel: 800 mm Z travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Hsdepumdcjpfx Agxsl Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, Double pallet changer, High-pressure coolant system 40 bar, Preparation for Renishaw MP 10 infrared probe (without probe), Mechanical tool breakage monitoring, Minimum quantity lubrication (MQL), Through-spindle air blast, Electronic oil mist extraction, Electronic handwheel, TRANSMIT function, Accuracy package, BA 4, Laminated safety glass pane right side door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, shelf handling device, master computer, and 10 pallets Approx. 98,500 operating hours, main switch ON Approx. 45,500 spindle hours

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, moč vretenovega motorja: 13.000 W, največja hitrost vretena: 6.300 obr/min, število osi: 2, This EMCO E45 turning and milling center was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range of up to 6300 rpm. The VDI30 tool turret with 12 stations supports 6 driven tools, enhancing versatility. Equipped with the SINUMERIK 828D OPERATE control system for precise machining and a robust build, it includes a chip conveyor and high-pressure coolant system. Contact us for further details on this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0-6300 rpm • C-axis on the main spindle • Tool turret: 12-position VDI30, axial • Direction logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tool speed: 0-5000 rpm Tailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tube Control & Software • SINUMERIK 828D OPERATE • SHOPTURN conversational programming • USB interface • Network / Ethernet • 10.4" TFT color display • 3D simulation Media & Machine Features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit • Chip conveyor interface • CE certificate • Documentation Tool measurement (E45) • Measuring arm mounted in the working area • Tool measuring on the turret • Short setup times / precise measurement / cost-efficient Workpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jaws Other (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Hjdpfsyffgrex Agxol Additional Equipment Bar loader / Magazine (SL1200 - as referenced) • Bar length: 850-1200 mm • Bar diameter: Ø 8-95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support surface: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operator side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090-1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • Documentation Spindle extension (for bar loader use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reduction sleeves (3 pieces) • Required for use with SL1200 Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mm High-pressure coolant system • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant supply • Interface & software Robot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual mode switching Additional Components • PC keyboard USB (QWERTY) • Machine status LED: Green (automatic), Red (alarm), White (material handling) Installation and Mounting Material • 4× vibration dampers • 4× mounting brackets • 4× heavy-duty anchors Part catcher • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with 1 chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter (subspindle): 32 mm Max. front drilling diameter: 12 mm Max. front tapping diameter: M10 Max. rear tapping diameter: M10 Spindle bore diameter: 37 mm Number of mountable tools: up to 25 (depending on type) Rapid traverse X/Y/Z axes: up to 32 m/min Bar feeder length: 2,500 mm Coolant tank volume: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Hodpsydaadjfx Agxjl Z2: 212 mm X3: 313 mm Z3: 430 mm A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or currentness of the information provided.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: A-07/471A, Sheet width - max.: 130 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Feed rollers: 2+2 Hjdpjcxxx Rsfx Agxel Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Strip straightening machine with integrated infinitely variable VARI drive, forward and reverse operation, mode selector switch for manual and automatic operation, entry roller basket, position display of the straightening rollers via analog display, adjustment of straightening roller positions via handwheels, automatic loop control, very good condition

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Hjdpfxjcirnis Agxol Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Machine lamp Fixed centre Set of machine mounting plates