Fliegl Zts 200 Mähdrescher nakup rabljenega (16.872)

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT45001013946, lastna masa: 12.100 kg, največja dovoljena obremenitev: 37.900 kg, skupna masa: 50.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2025, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.200 mm, skupna dolžina: 13.750 mm, skupna širina: 2.550 mm, skupna višina: 4.070 mm, vzmetenje: zrak, velikost pnevmatike: 205/65 R 17,5 ", največja hitrost: 90 km/h, barva: modra, Leto izdelave: 2024, Oprema: dvižna zadnja plošča, The images shown are archive photos; the vehicle may still be in use! Jumbo Low Loader Semi-Trailer Chassis Suitable for the transport of construction machinery up to 36,000 kg and a maximum external machine width of 2,500 mm, fifth wheel plate with replaceable 2" kingpin. Rear slope approx. 1,500 mm with a 7° angle. Ramp shaft at the top closed with steel/chequer plate. Trailer B-measurement = 12,000 mm Clear swing radius to the rear approx. 2,350 mm Spare wheel holder with one spare wheel Plastic toolbox In the low-bed area: Omega profile rail laterally underneath the outer frame as a lashing bar for tarpaulin and spacers for lashing points, not in the wheel area. Lashing Points: Iedpfxsylkywo Ab Aetg Gooseneck: - 5 pairs of lashing rings integrated in the outer frame, each rated at 5 t - 2 pairs of lashing pins integrated on top and side in the outer frame, each rated at 10 t Low bed: - 7 pairs of lashing pins integrated on top and side in the outer frame, each rated at 10 t - 9 pairs of lashing rings integrated in the outer frame, each rated at 5 t - 3 pairs of foldable lashing rings additionally recessed in the load floor, each rated at 10 t: 1x before the cranked area, 1x before the 1st axle, 1x behind the 3rd axle Axles & Suspension: - Drum brake axles - Last 2 axles with trailing steering - Air suspension with raise & lower valve + auto-reset function - H & S function with quick air release Wheels & Tires: - 205 / 65 R 17.5 for 8,000 kg axle load, technically at max. 90 km/h - Steel twin wheels Braking System: - 2-line compressed air brake system - Spring-loaded parking brake - 2 fail-safe coupling heads at the front, without connecting line - Knorr EBS Electrics: - 2 pairs of double LED warning panels, illuminated and extendable - 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front - 24 Volt, multi-chamber LED lights - Flashing side marker lights - Rotating beacon with bracket - LED work light inside on front wall - 2 additional LED work lights at the rear, switched via reversing light Floor: - Designed for a forklift axle load of max. 10,000 kg with at least 300 mm tire width (Deformation possible!) Posts: - 3 pairs of sliding stakes, adjustable along the entire length, with 4-fold plug-in pockets; only the rear 2 fields are equal in length - Pair of stake positions: 1x at the gooseneck, 3x in the low bed Drop-in Slats: - 5 rows of wooden drop-in slats Access Ramps: - Ramp surface with "Mega Grip" made of serrated grating (maximum forklift axle load 9,000 kg at least 200 mm tire width) - Hydraulically operated via own electro-hydraulic unit mounted in a stainless-steel box on the front right, incl. ramp controls, additionally via radio remote control (including rear support control, at customer's risk!). NATO socket on the truck required, including connection cable to truck as spiral cable (must not be connected while driving!). Truck installation not included. - Ramps made of steel across full width, approx. 3,300 mm long + 3 aluminium folding sections approx. 900 mm long making a total ramp length of 4,100 mm; if necessary, additional anti-slip plywood under the aluminium folding parts, max. 9 mm thick for lower approach angle - Ramp load capacity: 26,000 kg, reinforced version, over ramp shaft with steel/chequer plate; ramps secured for driving with top link! Exact equipment specification on request!

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 110 kW (149,56 KM), vrsta goriva: električni, barva: drugo, skupna masa: 21.360 kg, Leto izdelave: 2026, Čeljustni drobilniki običajno drobijo 200 do 300 ton na uro, odvisno od njihove zmogljivosti. Drobilnike z večjo zmogljivostjo je mogoče izdelati po naročilu glede na potrebe strank. Čeljustni drobilniki se na splošno uporabljajo za drobljenje najtrših kamnin, kot so bazalt, granit in gabro. Zaradi svoje močne in vzdržljive čeljustne konstrukcije so že vrsto let ena izmed najbolj priljubljenih izbir v rudarski industriji. Z nastavitvijo odprtine čeljusti je mogoče zelo natančno dobiti želen frakcijski izdelek in zmogljivost. Nastavljanje je enostavno izvedljivo s pomočjo hidravličnih cilindrov. SPLOŠNE ZNAČILNOSTI IN LASTNOSTI: - Pogon preko jermenice in škripca - Čeljustne plošče iz posebej ulitega manganovega jekla z visoko odpornostjo proti obrabi - Ekscentrična gred iz kovanega jekla, legiranega s Cr, Ni in Mo Itedpsy Dpl Rofx Ab Aog - Nastavljiva odprtina čeljusti s hidravličnim reguliranjem - Varnostne vzvodne plošče (toggle plate) za zaščito ob preobremenitvi - Površine, izpostavljene obrabi, so zaščitene z oblogami TEHNIČNE SPECIFIKACIJE: • Model: FABO CLK 1175 • Tip: Primarni čeljustni drobilnik • Vhodne dimenzije: 1070 x 760 mm • Nastavljiva odprtina čeljusti: 45–160 mm • Največja vhodna velikost: 760 mm • Zmogljivost: 200–300 ton/uro • Motor: težkoindustrijski GAMAK, 110 kW • Ležaji: težkoindustrijski SKF-FAG • Teža: 21.360 kg • Dimenzije: 2730 x 1698 x 2492 mm • Vključno z motorjem in varnostnimi zaščitami. * Vsi naši izdelki so izdelani skrbno in so pokriti z 1-letno garancijo! * Montaža in šolanje operaterjev BREZPLAČNO ZA VEČ INFORMACIJ NAS PROSIMO KONTAKTIRAJTE!

Stanje: zelo dobro (rabljeno), Profesionalna čelna rezkarica priznanega proizvajalca GARANT (Hoffmann Group), namenjena visoko zmogljivi obdelavi. Skupni premer: 200 mm. Vpenjalna odprtina: 60 mm. Opremljena z izmenljivimi ploščicami – enostavno upravljanje, primerna za delo v težkih industrijskih pogojih. Zelo dobro ohranjeno, orodje pripravljeno za uporabo. Idealna izbira za uporabo v obdelovalnih centrih in industrijskih rezkalnih strojih. Isdpfx Abew Sav Uj Aetg

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 07/2005, barva: drugo, Leto izdelave: 2005, Prazna masa: 4.200 kg Iodpfxsywtctj Ab Aotg Os 1: levo 4-8 mm, desno 10-10 mm Os 2: levo 10-10 mm, desno 12-12 mm Os 3: levo 4-8 mm, desno 4-4 mm Možna je zlaganje prikolic!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Viessmann Vitocrossal 200 Type: CM2 Year of manufacture: 2016 Output: 311 kW We speak Russian! Viewing only by prior telephone arrangement! Preferred sale to dealers, commercial traders or for export. All information provided without guarantee; subject to errors and prior sale. The seller accepts no liability for typing or data transmission errors. Of course, we also handle all formalities. Itedpfxstu Truo Ab Aog Loading possible.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viessmann Vitoplex 700 kW Year: 2014 Model: SX2A Output: 700 kW Inspection by prior telephone arrangement only! Preferred sale to dealers, commercial operators, or for export. All information is provided without guarantee; subject to errors and prior sale. R2ru7mxt2v The seller assumes no liability for typographical or data transmission errors. Naturally, we will also handle all formalities. Ijdpfetu T I Uex Ab Astg Loading possible Request more information

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Viessmann Vitorond 200 Moč: 160 kW Gorilnik: po želji je na voljo olje ali plinski Weishaupt gorilnik Iedpfemnqc Hox Ab Aotg Ogled le po predhodnem telefonskem dogovoru! Prednost imajo prodaja trgovcem, podjetnikom ali za izvoz. Vse informacije so brez garancije, pridržujemo si pravico do napak in predhodne prodaje. Prodajalec ne prevzema odgovornosti za napake pri vnosu ali prenosu podatkov. Seveda uredimo tudi vse formalnosti. Nakladanje je možno.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EDGE CELOVITA LINIJA VKLJUČUJE: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE POLNILNIK V200, leto izdelave 2010 15.120 delovnih ur Kapaciteta 9.000 kartonov na uro 2. TETRA PAK ACHX 10-0400-44 HELIX AKUMULATOR KARTONOV V400, leto izdelave 2010, 17.431 delovnih ur 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM NADGRAJEN V300, leto izdelave 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 Itedpfxsya Nf Is Ab Aog V200, leto izdelave 2010, 10.914 delovnih ur 5. TETRA PAK FILM WRAPPER 32 V400, leto izdelave 2010, nikoli uporabljen, samo 45 ur! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, leto izdelave 2010, wrap around 7. TETRA PAK LINE CONTROLLER LC30+ 8. TRANSPORTNI SISTEM 9. VKLJUČEN TISKALNIK VIDEOJET 1620 LINIJA JE V STANJU KOT NOVA. LOKACIJA – ŠVEDSKA. TAKOJ PRIPRAVLJENA ZA DEMONTAŽO IN POŠILJKO. CENA PO POVPRAŠEVANJU.

Stanje: rabljeno, Leto izdelave: 2003, Used Steam Boiler Manufacturer: Viessmann Model: Vitomax 200 Year of manufacture: 2003 Nominal thermal output: 375 kW Boiler water capacity: 1,400 l Operating overpressure: 8 bar Gas Burner: Weishaupt G/1E – Model ZMD-LN Output: 80-550 kW Iodpfsfm E Ifex Ab Aetg Year: 2003 Connection pressure: 15-500 mbar With existing Dungs DN40 fittings We speak Russian! Viewing by prior telephone arrangement only! Preferred sale to dealers, commercial customers or for export. All information is provided without guarantee; errors and prior sale remain reserved. The seller accepts no liability for typographical or data transmission errors. We are happy to buy your used boiler or burner! Naturally, we handle all formalities. Loading possible.

Stanje: novo, Leto izdelave: 2025, Our SAPI pressure blasting unit type "Mammut" with a 200-liter vessel capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The blasting unit is also equipped with a permanently mounted water separator, which removes moisture from the compressed air and prevents the blasting medium from clumping due to excessive moisture. For safe operation of the sandblasting equipment, our safety shutoff is included. This starts and stops the blasting process by actuating the hand lever, which is mounted on the blasting hose. The scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - 1 1/4" pressure regulator, permanently installed - 1 1/4" water separator, permanently installed - SAPI safety shutoff Technical data pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-certified with certificate - Fixed piping 1 1/4" inside and outside - Rubber-coated metal cone with rubber seal - Generously sized handhole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Total height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg Itedpfx Aewc Rk Esb Aeg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shutoff - Fastest switching times while complying with trade association regulations (VBG 48) - Pressure settings can be precisely adjusted before blasting – continuously adjustable from 0.1 – 12.0 bar - Reduced blasting media consumption, as the pressure vessel remains constantly pressurized with no unnecessary run-on - Upon restarting, full blasting pressure is instantly available at the nozzle – no pressure build-up required → lower consumption & less hose wear - No condensate forms in the vessel, as it remains pressurized at all times → no venting or aeration at each start/stop - Optimal media dosing with hardened fine-dosing valve - Lower compressed air requirement → noticeably reduced diesel consumption - Single-person operation possible, as the pressure can be read and adjusted directly at the manometer – even without starting - No failure-prone components such as control valves, membranes, or seals → maintenance-friendly and reliable in operation - Only the blasting hose in the safety shutoff needs to be checked and replaced if necessary

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33802011324, lastna masa: 5.340 kg, največja dovoljena obremenitev: 29.660 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2021, dolžina tovornega prostora: 10.000 mm, vzmetenje: zrak, velikost pnevmatike: 385 / 65 R 22,5", barva: siv, Leto izdelave: 2021, The images are archive photos; the vehicle may still be in use! Chassis Semi-Trailer Container Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin 24 t, 2-speed landing gear, single-sided operation, with semi-circular base and straight mounting plate, equipped with load compensation, 2 wheel chocks with holders, aluminium side underrun protection, foldable steel rear underrun guard, half-shell mudguards with anti-spray flaps behind each axle 8 timber bolster cradles as per manufacturer specification, with 16 lashing eye & hook combinations, bolted to frame, each with 2 telescopic timber stakes adjustable from approx. 2000 to 2800 mm, load capacity per pair 7 t. Axles & Suspension SAF disc brake axles with 430 mm disc diameter, air suspension with raise/lower valve, first axle automatic lift axle, additionally manually lowerable, operated via hand control on the vehicle Wheels and Tyres 385 / 65 R 22.5", Athos tubeless steel rims, factory silver Braking System 2-line compressed air braking system, spring-loaded parking brake, 2 interchangeable connectors up front, without connecting hoses, EBS (Electronic Braking System) with EBS socket at the front, without connection cable. NOTE: The trailer may only be towed by vehicles capable of ensuring effective operation of the ABS! Vehicle - Driving Stability System, EBS 2S/2M Electrics 24 Volt, multi-chamber lights, yellow LED side lighting, 2 x 7-pin interchangeable sockets at the front (without connection cable), 2 x reversing lights at the rear Bulkhead Steel/mesh front bulkhead, approx. 2300 mm high Registration / Signs Isdjwk Hcgjpfx Ab Aotg Country of registration: Spain, EC type approval according to 2007/46, prepared for dual licence plate holders (single row) 1 x plastic, 1 x stainless steel, both interchangeable

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 08/2011, vzmetenje: zrak, Leto izdelave: 2011, Oprema: ABS, = Additional Options and Equipment = - EBS (Electronic Braking System) - Lifting axle - Air suspension = Further Information = Axle Configuration Suspension: Air suspension Rear axle 1: Lifting axle Rear axle 2: Steering axle Weights Unladen weight: 7,100 kg Payload: 31,900 kg Gross vehicle weight (GVW): 39,000 kg Condition Technical condition: good Visual condition: good Warranty Disclaimer: No liability for typographical or printing errors. Subject to change, prior sale, and errors. Further Information Please contact Emad Al Shogran for further details. Vehicle number: Trailer: 12 Fliegl / BPW / Steering + Lifting axle / Extendable Serial No.: WFDFLT333501001822 German vehicle TÜV: General Inspection (HU): 05/2024 - Safety Inspection (SP): 11/2023 F.1 Technically permissible total mass in kg: 39,000 G Unladen weight: 7,100 kg Isdpeydqn Eofx Ab Aotg Steering + Lifting axle BPW axle Extendable = Company Information = Disclaimer: No liability for typographical or printing errors. Subject to change, prior sale, and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email:

Stanje: rabljeno, Leto izdelave: 2020, FLIEGL SDS350 15 metrov X-TRA DOLGA RAVNA kontejnerska šasija za 2 izmenljivi nadgradnji ali 2 kontejnerja !EKSTRA DOLG! !! Dolžina 14,85 m!! • Pripravljeno za 2 x 7,45 m nadgradnji • ali 2 x 20-ft kontejnerja • ravno šasijo • 3 x SAF zračno vzmetene osi, vsaka 8 t • Dvigalo/spuščanje • ABS • ASR Mere in teža vozila: • Dovoljena skupna masa: 35.000 kg • Lastna teža: 4.100 kg • Mere: 14.850 x 2.550 x 1.200 mm • Pnevmatske gume: 385/55 R22.5 • Globina profila: 13/13/11/12/12/9 mm - zelo dobro stanje, skoraj ni bil v uporabi! - Tehnični pregled / HU / SP: NOVO! - SP: 01/26 - Nemška polprikolica! - Prvi lastnik Pridržujemo si pravico do napak in vmesne prodaje! Ijdpfxowtbvte Ab Astg = Dodatne informacije = Letnik: 2020 Za več informacij kontaktirajte Joannis Arpantzanis ali Kai Bühler.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT33902028370, lastna masa: 6.015 kg, največja dovoljena obremenitev: 28.985 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 04/2021, naslednji pregled (TÜV): 10/2026, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 3.000 mm, skupna dolžina: 13.850 mm, skupna širina: 2.550 mm, skupna višina: 4.030 mm, vzmetenje: zrak, velikost pnevmatike: 435/50 R19,5", barva: črn, Leto izdelave: 2021, Oprema: EBS (Elektronski zavorni sistem), Chassis semi-trailer for freight forwarding Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly tapered with "Load-Lock profile" for lashing strap hooks, if present on the frame Note: To hook in straps in conjunction with sideboards, the sideboards must be opened! 24 t, two-speed landing gear, single-sided operation, with straight lower section, without compensating support Note: Free landing leg base dimension or free rear swing radius approx. 1930 mm, without supports, rear extending ladder, side-mounted door holders 2x wheel chocks with holders Aluminum side underrun protection Galvanized steel rear underrun protection Quarter shell mudguards in front of the 1st axle and behind each axle With anti-spray mudflaps behind each axle Rear impact guard, double-sided pallet limit (approx. 15–20 mm high), bolted design, loading height reduced by approx. 15–20 mm Plastic toolbox with drawer and storage shelf, w=650 / h=520 / d=670 mm, lockable with padlock (padlock not included) Axles & suspension SAF disc brake axles "Axle/chassis laser alignment" reduces tire wear and fuel consumption, air suspension, without lift axle Braking system 2-line compressed air braking system, color-coded piping for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, no connection cable included Attention: The trailer may only be towed by tractor units that ensure effective ABS operation! With lift & lower valve Vehicle stability control system Wheels and tires 435/50 R19.5", brand at manufacturer’s discretion, alternative 385/55 R19.5 Steel rims, factory silver Electrics 24 volt, multi-chamber lights, lateral yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, no connection cables included Floor Approx. 30 mm thick phenolic birch plywood, on longitudinal crossbeams for high point-load capacity, forklift axle load up to max. 7100 kg Bodywork Bodywork mounted Front wall / front corner posts 2,580 mm high, volume-design steel corner posts, release device for side curtain at front wall Isdpfxsx Sqmre Ab Astg "Crash-blocker", internal lower protection at approx. 140 mm height with steel impact guard Center posts 3 pairs of sliding posts, adjustable over the entire length, with 4-position sockets and a long lower pocket 3 pairs of post positions Insert slats 5 rows of wooden insert slats Rear wall / rear corner posts Rear corner posts in steel up to the lower roof edge, curtain mounting with round tube and curtain tensioning ratchet Double-wing rear portal doors, each with 2 internal locking bar closures Tarpaulin Tarpaulin with welded horizontal and vertical straps Tension locks made of stainless steel Roof Sliding roof, end lift foldable at the rear, roof can be slid from rear to front, L-roof beam for automotive industry, internal width between roof beams approx. 2,490 mm, tarpaulin color: white Non-elastic roof, minimal deflection of roof beam during loading and unloading EcoLift lifting roof, height adjustable by approx. 380 mm on both sides with gas strut support, three driving positions at front: internal height at front approx. 2900 mm / 2950 mm / 3000 mm, set to approx. 3000 mm Optimized rain gutter at rear, on top of rear crossmember, above the doors

Stanje: rabljeno, lastna masa: 7.950 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2013, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.850 mm, prostornina tovornega prostora: 95 m³, velikost pnevmatike: 385/55 R22,5, medosna razdalja: 1.310 mm, barva: črn, Oprema: ABS, Disc brake EBS Payload 27,050 kg Air lift suspension Sliding tarpaulin Platform Isdpfeuiytlsx Ab Aetg SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Subject to errors and omissions

Stanje: rabljeno, lastna masa: 7.950 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 01/2013, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.470 mm, višina nakladalnega prostora: 2.850 mm, prostornina tovornega prostora: 95 m³, velikost pnevmatike: 385/55 R22,5, medosna razdalja: 1.310 mm, barva: črn, Oprema: ABS, Disc brake EBS (Electronic Braking System) Payload 27,050 kg Air suspension with lift axle Sliding tarpaulin Platform Iodpjuiyvysfx Ab Aetg SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Subject to errors and omissions

Stanje: novo, številka stroja/vozila: 745183e095a8a43501797c66c, konfiguracija osi: 2 osi, prva registracija: 12/2022, velikost pnevmatike: -, Further information Tandem Platform Trailer Type: TPS 180 Standard Building Materials with Forklift Mount Weights and Dimensions: Gross weight: 18,000 kg Unladen weight (base version) approx.: 4,600 kg +/- construction tolerance Payload approx.: 13,400 kg Drawbar load: 1,000 kg Overall length approx.: 9,925 mm Overall width max.: 2,550 mm Overall height approx.: 3,150 mm Internal length approx.: 7,750 mm Internal width approx.: 2,480 mm Platform height approx.: 1,200 mm Coupling height approx.: 380 mm Drawbar length approx.: 2,150 mm Chassis: Central axle trailer Fine-grained steel welded structure Outer frame slightly angled, new design with load-lock profile for lashing strap attachment 1 pair of mechanical support legs at the front, with straight base and single-side operation on the front right 2 wheel chocks with holder Side underrun protection: aluminium Rear underrun protection: steel Quarter-shell mudguards 2 plastic toolboxes with drawer and shelf insert, dimensions W=650 / H=520 / D=670 mm, can be locked via a padlock (padlock not included) Mounting bracket for truck-mounted forklift at rear, incl. 2 fork insertion sleeves, 2 extendable support tubes, mounting bracket for chain securing with locking pin. Rear underrun protection with lighting unit foldable. Includes 2 loose rubber guards to protect the rear wall, counterweight recommended! Note: Limited ground clearance possible when forklift is mounted, reduced tracking performance possible, no warranty! (Forklift own weight up to max. 1,900 kg on trailers). (With proximity switch for forklift control in combination with lift axle) Due to the forklift mounting, the axles are moved rearwards; consider load distribution when driving without forklift. Customer risk! Notice! Forklift mounting: Carrying a forklift can significantly relieve the drawbar load. Front counterweight required! On wet and slippery roads, an additional customer-side ballast weight or a load of at least 2 t at the front end wall is required; the speed must then be reduced and the driving behavior adjusted to road and load conditions. The forklift must always be secured with chains during transport. Distance from lift mast to body max. 45 mm, or the vertical forklift tines must rest against the end of the forklift pockets. We assume that the towing vehicle has neither a steering nor a lift axle, or that the steering axle is always locked, or the lift axle is always on the ground. Drawbar Central Axle Trailer Drawbar with certified 50 mm drawbar eye, logistics version (not suitable for trucks with tail lifts) Underrun drawbar Folding bracket with spring assist on the drawbar for guiding connection cables to the truck Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment to reduce tire wear and fuel consumption Air suspension with raise/lower valve 1st axle: automatic lift axle with proximity switch, for lift axle (for use only with forklift) Ijdondwdhspfx Ab Aetg Wheels and Tires 385 / 65 R 22.5 At manufacturer’s discretion Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle driving stability system Duomatic connector at front, with connection to the truck, right hand side EBS: Electronic Brake System with EBS plug at front, with connection cable Attention: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber LED lights, side amber LED lighting, license plate

Stanje: novo, številka stroja/vozila: 8af4af460e7016a96d927f8f6, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/55 r22.5, Further information Chassis: Center axle swap trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Pair of guide rollers removable, front and rear 4 container locks with robust outriggers on 20‘-base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support feet at the front, with straight lower part and single-side operation on front right 2 wheel chocks with holders Aluminum side underrun protection Side underrun protection set inward for optimal clearance to the swap body supports Rear underrun protection, steel Half-shell mudguards Splash flaps Center axle trailer coupling device Drawbar with tested 50 mm towing eye, freight forwarding version (not suitable for trucks with tail lift, or precise assessment required with each order) Drawbar clamped/bolted, easily replaceable and partly length-adjustable! Lower coupler drawbar, free drawbar length approx. 2,200 mm Coupling height: 380 (Note! Not shown on offer, please compare with technical data on first page) Folding bracket with spring support on drawbar, for guiding connection cables to truck Axles & Suspension SAF disc brake axles Axis/chassis laser alignment for reduced tire wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, color-coded lines for easier service Air reservoir 208 liters Spring-actuated parking brake 2 non-interchangeable coupling heads at front, with connector lines to motor vehicle, connection at front right EBS, Electronic Braking System with EBS plug at front, including connector cable, connection at front right Note: The trailer may only be towed by tractor units that ensure the efficiency of the ABS! With lift & lower valve, hold function in both lift and lower position Vehicle stability system Wheels and tires 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin non-interchangeable plugs at front, with connection cable, connection at front right Additional LED work light, recessed at the rear, switched via reverse light LED work light at the front, center between the supports, pointing rearwards, switched via reverse light Registration/country plates Germany With Dekra inspection and certificate (per §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, white on sides and red at rear Paint Ijdpfx Abji Riw Uj Aotg Frame: DB 7350 Nova Grey 10-year warranty against rust-through Please note: Archive images!

Stanje: novo, številka stroja/vozila: 06b624786df9f4b5c196a36b0, lastna masa: 3 kg, največja dovoljena obremenitev: 11 kg, skupna masa: 14 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 285 / 70 r 19,5, Further information Chassis Central axle tipping trailer Steel welded construction, continuous tipping shaft at rear with 80 mm ball tipping bearing 2-speed gear support leg at the front Foldable rear support Wheel chocks with holder Steel underride guard Rear splash guards across the full width Quarter shell mudguards Lockable storage compartment for loading ramps beneath the loading area Drawbar device for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & Suspension SAF drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalization (rocker compensation) Wheels and Tires 285 / 70 R 19.5 Manufacturer’s choice Steel rims, factory silver Braking system 2-line air brake system Spring-actuated parking brake 2 interlock-proof coupling heads at the front, with connecting lines to the tractor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrics 24 Volt, multi-chamber lamps, yellow side LED lighting 2 white position lights in front 2 white/red lane marker lights at the rear All lamps in LED version (Note! With certain towing vehicles, diagnostic errors may occur, although functionality is ensured) 1 x 15-pin plug at the front, with connecting cable Hydraulics Three-way tipping system, hydraulic multi-piston press with stroke limitation and safety cable Ijdpei Ri Ipjfx Ab Astg Low-pressure cylinder up to max. 170 bar, without flow restrictor. If required, this must be retrofitted on the truck. Operation hydraulic via truck PTO Hydraulic connection with SVK plug NW 10/3, including connecting hose Tipper body Sturdy tipping body with 4 mm steel plate floor, steel drop sides, continuous, foldable and pendulum-mounted with central locking at the bottom. Corner stanchions at the rear plug-in. Tailgate foldable and pendulum-mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 bottom hinges. Side wall return springs (not possible with split side walls) Rear wall pendulum-mounted and as 2-wing door (not foldable), with door retainer and side protective rubber Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 t Country of registration / plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective strips according to ECE R 048, white on side and red at rear Paintwork Frame hot-dip galvanized including passivation; 15-year warranty against rust-through Side walls/body RAL 3002, carmine red Note! Body inside only primed! Attention: Archive images!

Stanje: novo, številka stroja/vozila: 5b4d5b70c0e4954373dd5bf0b, lastna masa: 3 kg, največja dovoljena obremenitev: 14 kg, skupna masa: 18 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 435/50 r19,5, Further information Chassis Swap Central Axle Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with stable arms on 20-foot base for swap bodies 7.15 / 7.45 and 7.82 1 pair of gearbox support legs at front, with straight lower part and single-sided operation on FR right 2 wheel chocks with holder Iedpfx Aei Ri Iwjb Aotg Side underrun protection aluminum Rear underrun protection steel Half-shell mudguards Splash flaps Drawbar for central axle trailer Drawbar with tested 50 mm towing eye, forwarding specification (not suitable for trucks with tail lift, or detailed examination necessary upon order) Lower coupling for drawbar, free drawbar length approx. 2200 mm Coupling height: 380 (Note! Not printed on offer, compare with the technical data on page one) Axles & Suspension SAF disc brake axles Axles/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Brake system 2-line compressed air braking system with color-coded routing for easy service Air reservoir 208 liters Spring-actuated parking brake 2 mix-up proof coupling heads at front, with connecting hoses to the tractor unit, connection in FR-right EBS electronic braking system with EBS plug at front, with connecting cable, connection in FR-right Note: The trailer may only be towed by vehicles ensuring effective ABS operation! With lifting & lowering valve, hold function in both positions Wheels and Tires 435/50 R19.5, brand as selected by manufacturer Steel rims, factory silver Electrics 24 Volt, multi-chamber tail lights, side yellow LED lighting 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin mix-up proof plugs at front, with connecting cables, connection in FR-right 2 additional LED worklights at rear, switched via reversing light 1 LED worklight front center between beams, rearward facing, switched via reversing light Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paintwork Frame DB 7350 Novagrau 10 years warranty against rust-through Note: Archive images!

Stanje: novo, številka stroja/vozila: d0373d7a64f0aead858df4eb5, lastna masa: 2.621 kg, največja dovoljena obremenitev: 15.379 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 385/55 r22.5, Further Information Chassis Swap Drawbar Trailer Fine-grain steel welded construction Fliegl V-Stream frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers at front and rear 4 container locks with stable extensions on 20-foot basis for swap bodies 7.15 and 7.45 Turntable with robust slewing ring Wheel chocks with holder Side underrun protection made of aluminium (Fliegl standard) Side underrun protection set inward for optimal clearance to swap body supports Rear underrun protection made of steel (Fliegl standard) Itodpfsi Ri Rgex Ab Aeg Rear underrun protection shortened for optimal clearance to swap body supports, lighting system mounted protected Half-shell mudguards (front where technically feasible, otherwise with metal cover + quarter-shell mudguards) with anti-spray mud flaps behind each axle Rubber buffer at rear Drawbar trailer coupling arrangement Drawbar with certified 40 mm towing eye Parking sockets for electrics/ABS on drawbar Brake/electrical connector plate on drawbar, EBS and electrics removable, all connection lines to towing vehicle as coiled cables Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to minimise tyre wear and fuel consumption Air suspension Brake system 2-line compressed air brake system, coloured line routing for easy service. Air reservoir 208 litres Spring-loaded parking brake Duomatic coupling at front, with connecting line to tractor unit, as spiral cable Wabco brand EBS, electronic braking system with EBS plug at front, connection cable as removable spiral cable Note: The trailer must only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve, hold function each in lowered/raised position + auto-reset function, quick-release valves on all axles Vehicle stability system Axle load detection via EBS CAN bus signal, for display in cab, truck must be pre-equipped, no truck installation (not a certified weighing system) Wheels and Tyres 385/55 R22.5, brand at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber rear lights in LED with resistor, side yellow LED lighting, number plate lighting in LED (Note: with certain tractor units there may be false diagnostics, even if functioning correctly) 2 white front position lights in LED 2 rear lane marking lights in white/red LED 1 x 15-pin connector at front, with removable spiral cable Additional LED work light at rear, switched via reverse light LED work light at front, centrally between supports, shining rearwards, switched via reverse light Country of Registration / Plates Germany with manufacturer’s confirmation + brake calculation 24/7 service hotline prepared for single-line number plate holder Warning panel according to ECE-70 Contour marking with reflective strips according to ECE R 048, white at sides, red at rear Paintwork Frame DB 7350 Novagrau, 10-year corrosion warranty Note: Archive images!

Stanje: novo, številka stroja/vozila: 9de849c07b4d917b8d8e1d037, lastna masa: 2.990 kg, največja dovoljena obremenitev: 15.010 kg, skupna masa: 18.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 265/70 r19,5, Further information Chassis Swap Dolly Fine-grain steel welded structure Front stop, longitudinally adjustable and foldable Pair of guidance rollers, removable, front and rear 4 container locks with robust outriggers on 20-foot basis for swap bodies 7.15 and 7.45 m Isdpfji Ri Rnex Ab Ajtg Dolly equipped with strong slewing ring Wheel chocks with holder Side underrun protection made of aluminium Side underrun protection recessed for optimal clearance to the swap body supports Underrun protection made of steel Underrun protection shortened for optimal clearance to the swap body supports, lighting system protected mounting Quarter shell mudguards at the front and half shell mudguards at the rear Drawbar coupling for trailer dolly Drawbar with tested 40 mm towing eye Drawbar mechanically length adjustable by 6 x 100 mm increments (approx. 1700 - 2300 mm), drawbar length set to 2200 mm Axles & Suspension SAF disc brake axles Axles/chassis laser aligned to reduce tyre wear and fuel consumption Air suspension Braking System 2-line compressed air braking system; colour-coded line routing for easy servicing Air reservoir: 180 litres Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the truck EBS by Wabco, electronic braking system with EBS socket at the front, including connecting cable Note: The trailer may only be towed by towing vehicles that ensure the proper functioning of the ABS! With raise & lower valve, holding function for both raised and lowered positions Wheels and Tyres 265/70 R19.5, brand at manufacturer's discretion Steel twin rims, factory silver Electrics 24 Volts, multi-chamber LED lights with resistor, side yellow LED lighting, LED license plate lighting (note: certain towing vehicles may generate false diagnostics despite proper function) 2 white front position lights in LED 2 white/red lane marker lights at the rear in LED 2 x 7-pin fail-safe connectors at the front, with connecting cable Additional LED work lights at the rear, both sides, operated via reversing light LED work light at the front, mounted centrally between the beams, rear-facing, operated via reversing light Registration/Country and Plates Germany With Dekra approval and report (according to §13 EG - FGV) 24/7 service hotline Incl. loading for 2/3 stack arrangement, loading frames available against deposit Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at rear Painting Frame DB 7350 Novagrau 10 years warranty against rust-through Note: Archive images!

Stanje: novo, številka stroja/vozila: 195f80ad09517628522e33a91, lastna masa: 7.300 kg, največja dovoljena obremenitev: 16.700 kg, skupna masa: 24.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 235 / 75 r 17,5, Further Information Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection Rear mudflaps across the entire width Quarter shell fenders in front of 1st axle 1st pair of wheel recesses embedded after the kink in the loading bed area, ramped entry, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! The frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses embedded between the axles in the loading bed area, ramped entry, length at the bottom approx. 600 mm, approx. 300 mm deep. Note! The frame in the main beam area is 300 mm higher than the wheel recess. Sliding extensions for widening, extendable to 3,000 mm (not in tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) Sliding extensions for widening, extendable to 3,000 mm, also at the bottom in the wheel recesses, foldable at the wheel recess extensions (extension not in the tail ramp area) (The track width of the construction machines or vehicles to be transported must not exceed the external frame width of 2,550 mm) 70 mm timber planks for extension to 3,000 mm Tie-down points on low loader Ijdpfei Ri Rvox Ab Ajtg 1 pair of lashing cutouts embedded in the longitudinal beam at the front in the kink, each rated at 10 t 4 pairs of lashing holes in the outer frame, each rated at 5 t (for attaching tie-down straps) 7 pairs of lashing mushrooms recessed at the top and side in the outer frame, each rated at 10 t 1x at the front in the kink 6x in the loading bed First lashing point 250 mm from the front and last max. 250 mm from the rear, spacing between lashing points no greater than 1,100 mm Drawbar for turntable trailer Drawbar with certified 40 mm towing eye Axles & suspension SAF drum brake axles Laser axle/chassis alignment – reduces tire wear and fuel consumption Parabolic spring suspension with maintenance-free steel-rubber bushings Wheels and tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-applied parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrics 24 Volt, multi-chamber lights, LED side marker lights, 2 white position lights at the front 2 white/red lane guidance lights at the rear 2 x 7-pin fail-safe connectors at the front, with connection cable, 1 LED rotating beacon with holder, switched via side light (removable beacon) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Front kink with steel/checkered plate covering Storage box embedded in the ramp to the kink, then with 70 mm softwood floor, in the wheel arch area with steel/checkered plate covering Tail ramp with 70 mm softwood floor Low loading area including tail ramp: 6,500 mm Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Wood-covered With spring assist Operating Instructions For 10,000 kg axle load an exemption is required, only indivisible loads allowed! The stated gross weight is technically possible, but depending on the type of load, the gross weight may not be achievable within the pe

Stanje: novo, številka stroja/vozila: eca976917d325d4adc41b69e8, lastna masa: 7.200 kg, največja dovoljena obremenitev: 27.800 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, velikost pnevmatike: 385/65 r 22,5, Further Information Chassis Semi-Trailer Freight Forwarding High-strength fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2-inch kingpin, main frame reinforcement for 25 t at the center of gravity over 3 m load length in the retracted state. 13 pairs of welded hooks for lashing strap attachment on the cross members 23 pairs of recessed lashing rings in the outer frame, each rated for 3.5 t Outer frame with load-lock profile for securing lashing straps Note! Not suitable for use with side walls! 24 t 2-speed landing gear in reinforced design for coupling/uncoupling under load, single-sided operation, with semi-circular lower part and straight mounting plate, with push compensation Wheel chocks with holder Aluminum side underrun protection Rear underrun protection Half-shell mudguards With anti-spray flaps in accordance with EC standards 1 spare wheel holder for 1 spare tire, with wheel fastening kit 1 stake storage box sealed on the sides, open at the top, beneath the loading floor, doors on both sides, width = 450 mm / height = 400/420 mm / depth = 2460 mm 6 pairs of extendable stanchion pockets for square stanchions 80x80 mm, extendable from load width 2000 mm to 3100 mm 4 pairs of stanchion pockets recessed in the outer frame, for square stanchions 80x80 mm 11 stanchion pockets embedded centrally in the floor, for square stanchions 80x80 mm, with reinforcement carrier, positioned between the outer stanchion pockets 5 x 3 pairs of stanchion pockets recessed in the outer longitudinal beams, for square stanchions 80x80 mm, including reinforcement carriers – for front and rear load securing during reinforcing mesh transports, 2x5000 mm or 2x6000 mm 6 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with upper cable guide for strap tensioning 12 lightweight insert stanchions, W=80/T=80 mm, usable height approx. 1850 mm, hot-dip galvanized, with welded lashing eyes at the bottom on both sides Note: Stanchion pockets and insert stanchions are not designed for the sole securing of long material, pipes, etc. without lashing 2 plastic toolboxes, with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (lock not included) 6 reinforcing steel winches with wire rope and counter hooks, with cable passage through the outer frame, 1 detachable mounting gearbox for the rebar winches – supplied loose (without frame mount) Telescoping Main frame telescopable Extendable by max. 4,000 mm and can be locked in place approx. every 500 mm Locking with pneumatic locking pin + frame lock indicator on both sides, operation via manual button, controls for brake/lock and suspension on the front left of the chassis in front of the axles Storage compartment between longitudinal beams in extended position Axles & Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via manual button, as well as manual switching in the towing vehicle (pin 10), without truck installation. Axle spacing staggered mm Air suspension 1st axle automatic lift axle, additionally electrically controllable from the truck, with traction aid, without truck installation (traction aid functional up to 30% axle overload and up to a speed of max. 25 km/h) Brake System 2-line compressed air brake system Itodoi Ri Szspfx Ab Ajg Color-coded piping for easy maintenance Spring-loaded par

Stanje: novo, številka stroja/vozila: 1acf251a278ec5cde4067a7b1, lastna masa: 5.800 kg, največja dovoljena obremenitev: 22.200 kg, skupna masa: 28.000 kg, konfiguracija osi: 2 osi, velikost pnevmatike: 235/75 r17,5, Further information Chassis: Semi-trailer, fleet use Fine-grain steel welded construction, fifth wheel plate with interchangeable 2'' kingpin Outer frame with slightly sloped design, new version with load-lock profile for attaching tension straps 24 t two-speed landing gear, single-side operation, straight base, without compensating slide Free support foot dimension or free rear swing radius approx. 1920 mm 2 wheel chocks with holders Side underrun protection: aluminium Rear underrun protection: steel Quarter shell mudguards in front of and behind each axle 1 spare wheel carrier for 1 spare wheel, with wheel fastening kit 1 plastic toolbox, with shelf, width=620/height=360/depth=440 mm, lockable with a padlock (padlock not included) Axles & suspension Drum brake axles as per manufacturer's choice Axles/chassis laser-aligned to reduce tyre wear and fuel consumption Air suspension Braking system Two-line compressed air braking system, colour-coded line routing for easy service Spring-loaded parking brake Duomatic connection at the front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise/lower valve Vehicle stability control system Wheels and tyres 235/75 R17.5, make as per manufacturer's choice Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable Flooring Anti-slip phenolic plywood, approx. 30 mm thick, for high point loading, suitable for forklift axle loads up to max. 5,600 kg Front wall / corner stanchions 25 mm aluminium hollow section, approx. 1,350 mm high, steel corner stanchions in volume version Iodpfx Abskv Uvzs Astg Country of registration / Plates Germany with Dekra inspection and expert report (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized incl. passivation, 15-year warranty against rust-through Front wall aluminium Attention! Archive photos shown!