Dixi 60S nakup rabljenega (11.979)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Arburg 270 S-250 - 60 Zapiralna sila: 25 ton Leto izdelave: 2002 Razmak med stebri: 27 x 27 cm Krmiljenje: S Vključuje transportne trakove Rodpfx Aex I Rdvjfajw

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 7 kg, 10 kosov cilindričnih čelnih rezkarjev HSS novo DIN841 Ø 60 mm Višina 60 mm Vpenjalni premer Ø 27 mm Rodpsxvq U Iefx Afajw Z vzdolžnim utorom

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 8 kg, 9 kosov valjnih čelnih rezkarjev HSS novi DIN841 Ø 60 mm Višina 60 mm Rsdpfjxvrlzex Afasw Vpenjalna odprtina Ø 27 mm Vzdolžni utor 2 kosa valjnih čelnih rezkarjev HSS novi DIN841 Ø 70 mm Višina 35 mm Vpenjalna odprtina Ø 27 mm Vzdolžni utor

Leto izdelave: 2011, stanje: rabljeno, Year of manufacture: 2011 Condition: good Paper baler Rsdpjk Nmnfjfx Afajw

Leto izdelave: 2006, stanje: rabljeno, Letnik izdelave: 2006 Stanje: dobro, funkcionalno 1. stolp - števec: 8,5M 2. stolp - števec: 10,4M Redpfoww Hv Tsx Afaow Konfiguracija: - 1x DC 10/60 - 10 postaj - povezovalni most - vakuumsko podajanje

Leto izdelave: 2023, stanje: novo, The SEMIX Mobile 60 S4 is equipped with concrete mixers with a capacity of 1500/1000 litres, which can be configured as single-shaft, twin-shaft or planetary mixers. Depending on the silicon content in the concrete mix design, SEMIX concrete mixers use NiHard4 or Hardox 450 wear parts. The aggregate storage bins can be loaded by wheel loaders using a single ramp. The aggregates are weighed on the weighing conveyor, which then transfers the aggregates to the transfer conveyor. Two separate conveyors ensure weighing accuracy and allow for higher concrete output. All SEMIX concrete batching plants are controlled by a SCADA system with an integrated Schneider PLC. Users can track all materials used and integrate them into their CRM system. For service purposes, the SEMIX engineering team can access the automation system online. Rjdpsgaw Urjfx Afaow

Leto izdelave: 2023, stanje: novo, SEMX compact concrete batching plants are designed for limited space conditions and easy overseas transport. The SEMIX Kompakt 60 fits into two containers and can be fully assembled within 3 days. The SEMIX Kompakt 60 is equipped with concrete mixers with a capacity of 1500/1000 liters, available as single-shaft or planetary mixers. Depending on the silicon content in the concrete mix, SEMIX concrete mixers use NiHard4 or Hardox 450 wear parts. Rsdpfxega D I Re Afaew All SEMIX aggregate storage bins have a trapezoidal shape for increased stability. The robust steel construction ensures a long service life. Aggregates are weighed in the weighing conveyor, which delivers the aggregates to the transfer mechanism. SEMIX compact concrete batching plants offer a variety of aggregate transfer mechanisms. Even in compact batching plants, users can choose either a skip hoist mechanism or a transfer conveyor for aggregate transfer. All SEMIX concrete batching plants are controlled by a SCADA system with integrated Schneider PLC. Users can track all materials used and integrate their CRM system. For service purposes, the SEMIX engineering team can access the automation system online.

Stanje: rabljeno, Leto izdelave: 2013, 1. Clamping force: 60 tons (600 kN) Rodjwp E Hzspfx Afaew 2. Injection unit orientation: Vertical 3. Rotary table: Included 4. Screw diameter: Approx. 35 mm 5. Shot size: Approx. 4.4 oz (125 g) 6. Injection pressure: Up to 210 bar 7. Injection speed: Approx. 139 mm/s 8. Mold opening stroke: 305 mm 9. Ejector stroke: 106 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Arburg 270 S 250-60 (2004) Zapiralna sila: 25 t Razdalja med veznimi palicami: 270 mm × 270 mm Dimenzije plošč: 400 mm × 400 mm Maks. hod odpiranja orodja: 275 mm Min. višina orodja: 198 mm Maks. dnevna odprtina: 279 mm Hod izmetalca: 95 mm Sila odpiranja orodja (maks.): 14 kN Dimenzije stroja (Š × D): 1250 mm × 3800 mm Teža stroja: ca. 1900 kg Premer polža: 22 mm Prostornina hoda: 39 cm³ Tlak vbrizga: 1810 bar Količina vbrizga (2 črpalki): do 8,1 cm³/s Zmogljivost materiala (PS): do 22,0 kg/h Leto izdelave: 2004 Rsdpsxl Tp Tsfx Afaew Tip: hidravlični brizgalni stroj

Stanje: generalkompletno obnovljen (rabljeno), PRICE ON REQUEST! > Used & Inspected Completely overhauled, all wear parts replaced - Fully measured - Gear backlash: Axis 4 – 0.02 WM Axis 5 – 0.02 WM Axis 6 – 0.01 WM - Central hand newly adjusted - 8-hour continuous test at 100% load - Delivery in a special box (insured shipping) - Central hand on exchange basis Rjdeg A Itqepfx Afaew (without exchange available upon request) - Gearbox overhaul of axes 1-6 - 12 months warranty - 18 months available for an additional charge IMMEDIATELY: More than 100 central hands in stock, various models. Just ask us! Express overhaul of your KUKA central hand also available – 48 to 72 hours from receipt. In addition, we also offer repair of ABB wrists.

Leto izdelave: 2021, stanje: novo, PRICE ON REQUEST! Rodpeg A Ivdsfx Afajw - NEW – unused - fully measured - Gear backlash: Axis 4 – 0.005 mm Axis 5 – 0.005 mm Axis 6 – 0.005 mm - Central hand newly calibrated - Endurance test: 8 hours at 100% load - Delivered in a special box (insured shipment) - Central hand on exchange basis (without exchange on request) - Gearbox overhaul of axes 1-6 - 12-month warranty 18 months available at an extra charge IMMEDIATELY available: more than 100 central hands in stock, various models. Simply inquire! Express overhaul of your KUKA central hand also available – turnaround 48–72 hours from arrival. Additionally, we also offer repair of ABB wrist units.

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 10.000 mm, skupna širina: 3.000 mm, skupna višina: 1.105 mm, barva: modra, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces within in-house transport operations. Multiple trailer operation: The trailer components are not intended (without a trailer coupling) for multi-trailer operation. Payload: Rodpfx Afoxrr Uhjasw 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections Loading platform: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, platform decked with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles; drawbar can be raised, removed, and swapped from front to rear; hitch height on towing vehicle approx. 650 mm (alternative heights permitted only upon notification); towing eye according to DIN 74054, diameter 40 mm; track rods with adjustable ball joint heads, diagonal or towing rods adjustable and fitted with low-maintenance joint bearings; drawbar safety lock according to UVV. Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even load distribution on the wheels; wheels with solid rubber cushion tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and lifetime lubrication. Paintwork: Finish coat RAL 5002 ultramarine blue For rent or sale EU-wide.

Stanje: skoraj kot novo (rabljeno), skupna dolžina: 6.000 mm, skupna širina: 2.500 mm, skupna višina: 1.012 mm, barva: modra, Operating Conditions: The heavy-duty trailer is designed for use on level, paved surfaces for in-plant transportation. Train Operation: The trailer components are not (without a trailer coupling) designed for operation in combination with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) on the loading platform between the axles. Point or strip loads are permitted only upon notification. Main Frame: Robust welded construction made of section steel profiles. Loading Platform: Rodpfx Aeuf Rw Tefasw Dimensions approx. 6000 x 2500 mm, loading height approx. 1012 mm, platform covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 pendulum axles, towing bar can be raised, removed, and attached from front to rear. Hitching height on towing vehicle approx. 650 mm (other hitching heights only permitted upon notification), towing eye as per DIN 74054, diameter 40 mm. Track rods with adjustable ball joint heads, diagonal or tie rods adjustable and fitted with maintenance-free joint bearings. Drawbar drop safety as per accident prevention regulations (UVV). Chassis: 4 steered pendulum axles, 2 steered axle lines to ensure even wheel load distribution, wheels with solid rubber tyres approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Finish: Top coat in RAL 5002 Ultramarine Blue. Additional Equipment: - Optional: Two-line compressed air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded actuators, also acting on 4 wheels. - On each longitudinal side, 2 lashing or crane eyes made of round steel welded horizontally into the outer frame members; use of crane eyes only when the trailer is not loaded. - Inner turning radius approx. 2100 mm - Outer turning radius approx. 5500 mm - Towing bar length approx. 1500 mm Rental or sale EU-wide.

Leto izdelave: 2023, stanje: novo, The SEMIX Mobile 60 S4 is equipped with concrete mixers with a capacity of 1500/1000 liters, which can be single-shaft, twin-shaft, or planetary mixers. SEMIX mixers are manufactured using NiHard4 or Hardox 450 wear-resistant components, depending on the silicon content specified in the concrete mix design. Aggregate bins can be loaded by wheel loaders using a single ramp. Aggregates are weighed on a weighing conveyor, which transfers them to the main transport conveyor. The use of two separate conveyors ensures both weighing precision and efficiency, enabling higher concrete output rates. Redpfjgaxbmex Afajw All SEMIX concrete batching plants are controlled by a SCADA system integrated with a Schneider PLC controller. Users can monitor all utilized materials and integrate data with their CRM systems. The SEMIX engineering team is able to provide remote Automation system support and services online.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.524 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, širina mize: 660 mm, dolžina mize: 1.670 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, Ta vertikalni obdelovalni center HURCO VMX 60 je bil izdelan leta 2008. Opremljen je z upravljanjem MAX in ima 3 osi. Stroj ima hitrost vretena 10.000 vrt/min. Prednosti stroja Kakovostne prednosti • Dobro stanje Tehnične prednosti Rsdpfxsyi Ekxo Afaew • Revolver za orodje s 24 pozicijami • Oprema z različnimi orodji • Dodatna oprema: sesalec ostružkov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 7.186 h, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: ITNC530, največja hitrost vretena: 12.000 obr/min, število osi: 5, Ta 5-osna DMG MORI DMU 60 MonoBlock je bila izdelana leta 2010. Opremljena je z avtomatskim menjalcem orodij za 60 orodij, največjo hitrostjo vretena 12.000 min⁻¹ in držalom za orodje SK40. Druge lastnosti vključujejo merilno sondo Heidenhain TS649, 3D quickSET in hlajenje skozi vreteno pri 40 bar. Idealna za kompleksne in natančne obdelovalne naloge. Za več informacij o tem stroju nas kontaktirajte na Islandiji. • Hlajenje skozi vreteno: 40 bar • Razpršilna pištola • Elektronski ročni kolešček • BA4 način delovanja Rsdpfx Aox D Iirsfajw Dodatna oprema: • Merilna sonda Heidenhain TS649 • 3D quickSET (kalibracijski/preverjalni sistem) Tehnične specifikacije Stožec SK 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, potovalna razdalja osi X: 1.524 mm, pomik osi Y: 660 mm, pomik po osi Z: 610 mm, največja hitrost vretena: 10.000 obr/min, število osi: 3, Ta 3-osni vertikalni obdelovalni center Hurco VMX 60 je bil izdelan leta 2008. Vertikalni obdelovalni center z upravljanjem MAX ponuja pomik osi X 1.524 mm, osi Y 660 mm in osi Z 610 mm. Opremljen je z vretenom s hitrostjo 10.000 obr/min, vretenom s konusom BT40 ter revolverjem z 24 pozicijami za orodja. Izkoristite priložnost za nakup vertikalnega obdelovalnega centra Hurco VMX 60. Za več informacij o tem stroju nas kontaktirajte. • Velikost mize: 1.670 x 660 mm • Revolver za orodja: 24 pozicij Dodatna oprema • Razna orodja • Odsesavanje odrezkov Rodpfx Aoygmtvofaew Tehnične specifikacije Tip konusa: BT 40

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.339 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 510 mm, pomik po osi Z: 510 mm, število osi: 3, Ta 3-osna DMG DECKEL MAHO DMU 60 monoBlock je bila izdelana leta 2005. Opremljena je s transporterjem za ostružke in hladilnim sistemom, kar je idealno za zahtevna obdelovalna opravila. Če iščete visoko kakovostni rezkalni stroj, razmislite o DMG DECKEL MAHO DMU 60 monoBlock, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Heidenhain TNC530 • 24 mest za orodja • SK-40 vpenjalo Rjdpjx D Nwkjfx Afajw • Hitrost vretena: 18.000 • Merilna tipala Tehnične specifikacije Hlajenje skozi vreteno: Da

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Koda Ferwood: RU0011863 - Koda proizvajalca: 4-075-02-0231 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušeno - Združljiv stroj: - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. 16KG 46X39X27 Rsdpfx Afoymdzweaow

Stanje: rabljeno, Model: H-600 Serijska številka: 11-122-116 Delovne ure: 17395 Napetost: 380 V, 50 Hz RPM: 1425 HP: 1 Tok: 4,0 A Rjdpfx Asyzzldsfaew Faze: 3

Stanje: dober (rabljeno), Grezilnik, stožčasti grezilnik, grezilnik za odstranjevanje robov -Velikosti: 2x20/2x30/3x45/4x60 mm -Grezilnik: 90° -Proizvajalec: Bilz -Prodaja: samo kompletno -Teža: 5 kg Rsdpfx Aeb A Rccefajw

Leto izdelave: 2025, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, LTW Verbau VB 60 Box — Letnik izdelave 2025 Rjdpjy A E I Sofx Afaow Rabljeno iz profesionalnega najemnega parka Kurt König Baumaschinen GmbH, Einbeck. Stanje in informacije: - Stanje: Rabljeno iz najema, redno servisirano - Funkcija: Popolnoma delujoče - Fotografije izdelka bodo kmalu na voljo — v primeru interesa nas kontaktirajte za aktualne slike - Ogled je možen na naslovu 37574 Einbeck po dogovoru Cena 3.950 EUR + DDV | EXW Einbeck | Dostava po dogovoru

Stanje: rabljeno, Leto izdelave: 2021, obratovalne ure: 20.000 h, Funkcionalnost: popolnoma funkcionalen, Na voljo dve toplotni črpalki. (Fotografija z dvema toplotnima črpalkama je iz časa postavitve, vse ostale fotografije so aktualne) - vsaka skupaj z upravljalno omarico - samo ogrevanje - malo uporabljene, glej posnetke zaslona Navodila za montažo in uporabo (vključno s tehničnim listom) v prilogi Rodpfowta T Rox Afaow Navedena cena velja za en kos

Stanje: pripravljen za uporabo (rabljen), * Znamka: Metso /CFBK * Tip: 18/60-3 Redpfx Aoywnh Rofaow * Površina: 6000 x 1800 mm – 3 palube. * Vključuje: vzmeti in 22 kW elektromotor.

Stanje: pripravljen za uporabo (rabljen), * Znamka: Hazemag/Krupp * Tip: 21/60-3 Rodpfoywnh Djx Afasw * Površina: 6000 x 2100 mm – 3 krovi. * vklj.: vzmeti.