Bacci Sharp nakup rabljenega (461)

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23NEOS04, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film application and cutting. 99 individually programmable programs Includes 1 remote control – additional units optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Film power stretch: 120-400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film application tension electronically controlled by control unit Quick-load IEF system for easy film roll change Film specification: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit Film tension storable in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height "machine with mast (pallet included): 2,150 mm Height detection by light sensor or by manual input via display Protective bar for emergency stop of drive unit Emergency stop switch compliant with CE regulations Acoustic warning signal and warning light when machine is started Fall protection for the film carriage Pushbutton for start & stop Machine operation compliant with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All function parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet up to 80 m/min Carriage speed independently adjustable upwards and downwards - Carriage speed upwards: 1.3 to 5.4 m/min Pgsdpfxoykug Se Anpju - Carriage speed downwards: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting of pallet wrapping height - Film application tension for base & top wrap / ascent & descent independently adjustable - Film pre-stretch for base & top wrap / ascent & descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 savable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (only upwards or only downwards) - Wrapping cycle with defined start and stop height - Wrapping to a saved height (switching off light sensor for height) - Wrapping cycle for large-sized pallets - Wrapping cycle for top sheet film - Soft start cycle for application of edge protection - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film breakage on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Other units available from stock in Ludwigsburg for immediate delivery

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 994.522 km, moč: 338 kW (459,55 KM), prva registracija: 07/2011, vrsta goriva: dizel, velikost pnevmatike: 385/65 R 22.5, konfiguracija osi: 6x2, medosna razdalja: 5.100 mm, gorivo: dizel, barva: drugo, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, število sedežev: 2, skupna dolžina: 9.100 mm, skupna širina: 2.500 mm, skupna višina: 3.700 mm, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 11.500 kg, dovoljena osna obremenitev (os 3): 7.500 kg, dolžina tovornega prostora: 6.600 mm, širina tovornega prostora: 2.380 mm, višina nakladalnega prostora: 1.970 mm, Leto izdelave: 2011, Oprema: zapora diferenciala, Konstrukcija Prostornina: 31 m3 = Dodatne informacije = Splošne informacije Kombinacija: Spacecab, enojna Registrska tablica: BZ-HT-71 Tehnične informacije Število valjev: 6 Prostornina motorja: 12.902 cm3 Pogonski sistem Znamka motorja: DAF Konfiguracija osi Zavore: kolutne zavore Sprednja os: mera pnevmatik: 385/65 R 22.5; maks. obremenitev osi: 9000 kg; vodena; profil pnevmatik na levi strani: 70%; profil pnevmatik na desni strani: 70%; vzmetenje: listno vzmetenje Zadnja os 1: mera pnevmatik: 315/70 R22.5; dvojne pnevmatike; zapora diferenciala; maks. obremenitev osi: 11500 kg; profil pnevmatik na levi strani (notranji): 40%; profil pnevmatik na levi strani (zunanji): 40%; profil pnevmatik na desni strani (notranji): 40%; profil pnevmatik na desni strani (zunanji): 40%; vzmetenje: zračno vzmetenje Zadnja os 2: mera pnevmatik: 315/70 R22.5; dvojne pnevmatike; maks. obremenitev osi: 7500 kg; vodena; profil pnevmatik na levi strani (notranji): 40%; profil pnevmatik na levi strani (zunanji): 40%; profil pnevmatik na desni strani (notranji): 40%; profil pnevmatik na desni strani (zunanji): 40%; vzmetenje: zračno vzmetenje Teže Lastna teža: 11.610 kg Nosilnost: 16.388 kg Dovoljena skupna masa: 28.000 kg Funkcionalnost Kiper: zadaj Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Število ključev: 2 = Informacije o podjetju = Za več fotografij glejte: Pgsdjy R Dwuopfx Anpsu Zakaj kupujete pri Thomas Trucks? Izbira je preprosta. Thomas Trucks je eno od vodilnih neodvisnih trgovinskih podjetij na svetu, specializirano za gospodarska vozila. Tu lahko izbirate med nenehno spreminjajočo se ponudbo rabljenih tovornjakov, traktorjev, priklopnikov in polpriklopnikov. Naša ponudba obsega vse evropske znamke, letnike izdelave in cenovne razrede. Tu vedno najdete dobro vozilo po ugodni ceni! Thomas Trucks vedno ponuja: - Konkurenčne cene - Dobro storitev - Prostorne, hitro spreminjajoče se zaloge - Preverjeno kakovost - Uredno poslovanje - Govorimo več jezikov - Pomoč pri prijavi in transportu - Hitra ureditev (izvoznih) registracijskih tablic - Profesionalne tehnične storitve - In še več. Obiščite spletno stran: in si oglejte našo celotno ponudbo in konkurenčne ponudbe Odprti smo 6 dni v tednu. Potrebujete pomoč pri izvozu, uvozu ali transportu vašega vozila? Obrnite se na našo prodajno ekipo. Prav tako je možno, da nam prodate vaše trenutno vozilo. Prizadevamo si, da bi podatke prikazali čim bolj natančno, vendar iz teh podatkov ne moremo izpeljati nobenih pravic. Lahko vam tudi uredimo financiranje na Nizozemskem.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, barva: drugo, širina tovornega prostora: 2.530 mm, dolžina tovornega prostora: 6.850 mm, NCH, odprto stanovanje Pod iz lesa Strel v glavo 20-palčni vrtljivi zaporniki Rong Gaten Popolno 685 x 253 = Dodatne informacije = Letnik: maj 2004 Tehnično stanje: zelo dobro Optično stanje: zelo dobro = Podatki o podjetju = Za več fotografij glejte: Zakaj kupujete pri Thomas Trucks? Izbira je preprosta. Thomas Trucks je eno od vodilnih neodvisnih trgovinskih podjetij na svetu, ki se ukvarja s prodajo gospodarskih vozil. Ponujamo stalen izbor rabljenih tovornih vozil, traktorjev, priklopnikov in polpriklopnikov. Naša ponudba vključuje vse evropske znamke, letnike in cenovne razrede. Pri nas boste vedno našli dobro vozilo po ugodni ceni! Thomas Trucks vedno ponuja: - Konkurenčne cene - Kvalitetno storitev - Prostorno, pogosto obnavljano zalogo - Znano kakovost - Uredno poslovanje - Govorimo več jezikov - Pomagamo pri postopkih prijave in transportu - Hitra ureditev (izvoznih) registrskih tablic - Profesionalne tehnične storitve - In še več. Obiščite spletno stran: in si oglejte našo celotno ponudbo ter konkurenčne cene. Odprti smo 6 dni v tednu. Potrebujete pomoč pri izvozu, uvozu ali pošiljanju vašega vozila? Obrnite se na našo prodajno ekipo. Prav tako je možno, da nam prodate svoje trenutno vozilo. Prizadevamo si, da bi podatke prikazali čim bolj natančno, vendar iz teh podatkov ni mogoče izpeljati nobenih pravic. Pgjdpfx Aez A Hdvenpou Prav tako lahko uredimo financiranje za vas na Nizozemskem.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FTR-124-1217, skupna dolžina: 2.150 mm, skupna širina: 2.205 mm, skupna višina: 2.320 mm, skupna masa: 3.750 kg, vhodna napetost: 400 V, višina obdelovanca (maks.): 150 mm, vhodna frekvenca: 50 Hz, moč: 25 kW (33,99 KM), širina obdelovanca (maks.): 80 mm, dolžina obdelovanca (maks.): 80 mm, vhodni tok: 50 A, Ta Q-Fin F1200 XL VAC se nahaja v razstavnem salonu v Bergeijku in je bil uporabljen izključno za demonstracijske namene. Stroj je zato deloval le omejeno in si ga lahko še vedno ogledate in preizkusite v naši razstavni sobi. F1200 XL VAC je zmogljiv, večnamenski stroj za obdelavo, namenjen odstranjevanju ostrih robov, zaokroževanju in končni obdelavi pločevin širine do 1200 mm. Zahvaljujoč kombinaciji več obdelovalnih postaj je mogoče izvajati različne obdelave v enem samem ciklu. Stroj je opremljen z vakuumskim sistemom, ki med procesom obdelave varno pritrdi obdelovance na transportni trak. Pgsdpfx Aozzlqnonpju Prva obdelovalna postaja je opremljena z brusno enoto. S to enoto se odstranjujejo ostri robovi in nepravilnosti z površine izdelka, obdelovanec pa se pripravi za naslednje obdelave. Nato se ostri robovi izdelka obdelujejo z oscilirajočimi krožnimi ščetkami. Ščetke obdelujejo konture in vdolbine obdelovanca iz različnih smeri, kar omogoča enakomerno zaokroževanje robov. Odvisno od uporabljenih ščetin se stroj lahko uporablja tudi za odstranjevanje oksidne plasti in zmanjšanje hrapavosti površine. Izvedba XL ima dodaten drugi brusni agregat. To omogoča izvedbo dodatne končne obdelave po odstranjevanju ostrih robov in zaokroževanju. Vse obdelovalne postaje je enostavno upravljati preko HMI-na zaslonu na dotik. Različne nastavitve je mogoče shraniti v programih, kar omogoča hitro ponovno nastavitev za serijske izdelke in visoko stopnjo ponovljivosti. Samodejno nastavljive postaje poleg tega zmanjšujejo potrebo po ročnem nastavljanju in zmanjšujejo možnost napak pri nastavitvah s strani operaterja. F1200 XL VAC je primeren za obdelavo nerjaveče jekla, aluminija in jekla ter združuje odstranjevanje ostrih robov, zaokroževanje robov in končno obdelavo v enem stroju. Poleg tega F1200 omogoča integracijo z rešitvami ERP in sistemi za manipulacijo, kar omogoča vključitev stroja v nadaljnje avtomatizirane proizvodne procese.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 154 kg, vhodna napetost: 220 V, skupna širina: 660 mm, skupna dolžina: 1.500 mm, skupna višina: 1.310 mm, HP DesignJet XL 3600 MFP - Skupna številka natisnjenih m2: 23.105 - Vključuje kalibracijski list Pgsdszpyfispfx Anpju - Model »vse v enem« - Vključuje možnost PostScript Zelo visoka produktivnost zahvaljujoč hitremu prvemu tisku in visoki hitrosti tiskanja. 📐 Idealen za CAD-, GIS- in gradbene načrte, z ostrimi linijami in natančnimi barvami. 📄 Samodejno podajanje zvitkov s vgrajenim zbiralnikom za natisnjene izpiske. 📱 Neposredno tiskanje iz USB-pomnilnika, omrežja, e-pošte in mobilnih naprav. 🖥️ 15-palčni na dotik občutljiv zaslon za enostavno upravljanje. 🔒 Izčrpna varnost, vključno s šifriranim shranjevanjem in varnostjo omrežja. 📦 Primeren za velike količine tiskanja, zato je priljubljen pri oddelkih za reprodukcijo in v tehničnih risalnicah. Ta stroj je bil pregledan in obsežno testiran s strani našega specializiranega tehničnega oddelka. Če želite več informacij, nas prosim kontaktirajte. Omogočamo tudi pošiljanje po vsem svetu.

Stanje: novo, Leto izdelave: 2025, The skyCUBE M laser processing center – the new benchmark in laser material processing! PFEIFER Laser Processing Center skyCube M Laser machine with 200W CO2 laser – available immediately Pedpfx As Sfanonpsgu Mclass = Processing area X 1250 x Y 650 x Z 300 mm skyCUBE M Laser Processing Center – the new Mclass multifunction laser engraving and cutting machine – easy laser processing, high precision – laser engraving and cutting with high speed and quality. Our new and best multifunctional system impresses even the most experienced user with its innovative design. This CO2 laser/fiber laser demonstrates outstanding performance in all industrial applications as a CO2 or fiber engraving laser as well as a CO2 or fiber cutting laser. With an optional laser power of up to 1000W (1kW), the CO2 laser device/fiber laser system is extremely versatile for use in your production environment. skyCUBE laser units comply with all requirements of Class 1 according to DIN EN 60825-1, offering you maximum safety. Depending on the selected and installed laser power, this CO2 laser/fiber laser is perfectly suited for cutting and engraving a wide range of materials such as metals, acrylic glass, solid wood and wood composites, wood-based materials, paper, cardboard, various plastics and foams, textiles, and much more. The excellent engineering – 100% produced in Plauen – guarantees users from metal fabrication to laser source a high working accuracy with consistently high quality. With cutting speeds up to 8000 mm/s and engraving speeds up to 4000 mm/s, the advanced laser technology ensures clean, ultra-sharp cutting edges and precise laser engravings. The ergonomic design featuring a pull-out worktable simplifies loading the machine. A drawer in the lower section collects processed material efficiently. User-friendly and intuitive – the included skyCUBE PC software (ready for Windows®). A straightforward, practical user interface adapted to the Windows standard enables fast and effective operation. High system stability, professional monitoring, efficient machine operation and control, as well as compatibility with conventional file formats characterise the software. Data output is organised by layers – each layer defined separately, including sequencing and process type. Parameters such as laser power and processing speed are automatically stored for each layer and can be retrieved from a materials database at any time. Laser projects are transmitted to the skyCUBE M processing center via a computer connected through LAN/USB interface. Projects can be executed repeatedly, even without the PC being on. A modern touch control panel provides access to all system information and functions. skyCUBE M Laser Processing Center at a glance: - German industrial-standard welded steel construction for secure and vibration-free mounting of laser components and axis systems, equipped with mobile industrial leveling feet - 8" touchscreen display – better overview, more control, enhanced communication with the skyCUBE M laser processing center - Redundant safety system – Class 1 laser

Stanje: novo, Leto izdelave: 2026, The PROFESSIONAL machine with the best international price-performance ratio! Ergonomic operation with a constant view of the cutting edge! Direct from the renowned Swiss manufacturer The original from BERGER technologie, known for over 40 years for their extremely robust and highly durable DRILL BIT GRINDING MACHINES MADE in SWITZERLAND! WTG-1 Professional Mortise Chisel Grinder and Planer Knife Grinding Machine Description: For precise and efficient work, a perfectly ground, razor-sharp cutting edge is an absolute must. With our grinding machine, you can sharpen your tools quickly, easily, precisely, and cost-effectively. You can grind mortise chisels, planer knives, gouges, chisels. Your advantages: - Highly precise, stable, and durable construction - Fast: grind a perfectly burr-free edge in just 30 seconds - Extremely user-friendly, even suitable for trainees and unskilled operators - Dry grinding principle, meaning no issues with moisture (water/oil) - Continuously variable cutting angle adjustment - Purchase fewer new tools, reducing maintenance and fixed costs Manufactured in SWITZERLAND = Swiss Quality Where is the WTG used? Anywhere conventional woodworking is carried out. For example: joineries, carpentries, timber construction, schools, technical colleges, training/workshops. Design of the grinding machine: The WTG is powered by a robust 500-watt motor. A dust-protected, high-precision, ball-bearing profile guide rail serves as the sliding carriage, used thousands of times in machine tools, industrial robots, and precision special-purpose machines. The continuously variable grinding feed is ensured via a precise and self-locking dovetail guide. Tool clamping is secure and stable thanks to a parallel clamping system. Our WTG grinding machine offers a unique price-performance ratio. See for yourself or let us advise you. Pgedpsbxudksfx Anpeu Technical Data: - Weight: approx. 24 kg - Dimensions: approx. 55 x 35 x 30 cm - Connection: 230 Volt / Plug Type J - Motor: 550 watts - Speed: approx. 3,000 rpm - Sharpenable tool width: 5 - 60 mm - Cutting angle adjustment: 25° - 30° infinitely variable - Main grinding wheel: Special corundum ø 100 mm - Polishing wheel/buffing wheel: Special type ROTAX ø 150 mm - Other polishing and grinding wheels available on request. Sales price: EUR 2,225.00 excluding shipping costs A different perspective A high-quality mortise chisel with a width of, for example, 28 mm and a usable blade length of approx. 120 mm costs on average CHF 50.00. With our WTG (Wood-Tool-Grinder), you can regrind such a chisel perfectly and burr-free in about 30 seconds and do this on average 200 times, assuming a new tool with normal edge wear each time. This allows the machine and hand tools to be amortized rather quickly. Above all, recurring high variable costs for tools and grinding services can be minimized every year. Once you own a WTG machine, you will always be working with perfectly ground tools, which also has a positive effect on quality and working speed, among other things. You benefit several times over... Notes If you are sharpening a mortise chisel or a hand plane blade by hand or with a

Stanje: rabljeno, Pivoting Bending Machine KRAMER Type A-Maut. II 1000 Serial No. 48 287 Year of manufacture: 1990 Working length: 1060 mm Max. sheet thickness: 3.75 mm Stroke of upper beam: 180 mm Adjustability of bending beam: 60 mm Back gauge: 480 mm Drive power, bending beam: 4 kW Drive power, upper beam: 1.5 kW Power supply: 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via preset angle selector disc - One-piece sharp rail 135° - Back gauge with handwheel adjustment and simple measuring scale - Continuous stop rail Pgedjfnabyjpfx Anpju - 3-way electric foot switch Required space (L x W x H): 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), RAS Turbo Bend Plus 62.25 Neue Getriebe von RAS eingebaut Biegelänge: 2.540 mm / 2,5 Meter Maximale Materialstärke: 2,5 mm Vier äußerst dynamische und schnelle rampengeführte Achsbewegungen unter CNC-Steuerung System 6000 CNC-Touchscreen – neue Steuerung 2016 installiert Erweiterte Hinteranschläge Lichtschranken Mobiler Werkzeugwagen Baujahr: 2007 / Neumaschine Im Lieferumfang enthalten: J-Form Hinteranschlag Komplett mit segmentierten und geraden Werkzeugsätzen sowie Werkzeugwagen Werkzeuge (im Lieferumfang der Maschine): Standard-Oberwange „scharf“ – 3 x 845 mm Längen Unterwerkzeug, einteilig – 1 x 2,54 m Länge, 10 mm breit Unterwerkzeug, einteilig – 1 x 2,54 m Länge, 20 mm breit Geißfuß-segmentierte Oberwerkzeuge – 110 mm Höhe: 200 mm breit – 10 Längen 60 mm – 1 Länge 55 mm – 1 Länge 50 mm – 1 Länge 45 mm – 1 Länge 40 mm – 1 Länge 35 mm – 1 Länge 30 mm – 1 Länge 120/90 mm LH-Kastenende – 1 Länge 120/90 mm RH-Kastenende – 1 Länge Segmentierte Unterwerkzeuge: 200 mm breit – 10 Längen 120 mm – 2 Längen 60 mm – 1 Länge 55 mm – 1 Länge 50 mm – 1 Länge Pgjdpfsgd Dgqox Anpou 45 mm – 1 Länge 40 mm – 1 Länge 35 mm – 1 Länge 30 mm – 1 Länge Werkzeugwagen inklusive

Stanje: novo, lastna masa: 128 kg, največja dovoljena obremenitev: 622 kg, skupna masa: 750 kg, konfiguracija osi: 1 os, dolžina tovornega prostora: 2.304 mm, širina tovornega prostora: 1.256 mm, višina nakladalnega prostora: 300 mm, prostornina tovornega prostora: 0,7 m³, vzmetenje: drugo, velikost pnevmatike: 13, medosna razdalja: 155 mm, barva: srebrn, Leto izdelave: 2023, Oprema: spojka prikolice, SHIPPING TO GERMANY, AUSTRIA, FRANCE, ROMANIA, ITALY, IRELAND, BELGIUM, CZECH REPUBLIC, DENMARK, AND THE NETHERLANDS POSSIBLE! Manufacturer: UNITRAILER Product Code: UT004047 Model: Garden Trailer 230 Tilt Gross Vehicle Weight (GVW) max.: 750 kg Load area length: 2304 mm Load area width: 1256 mm Tyre size: 155/70 R13 Spare wheel with bracket: optional Wheel location: outside cargo area Suspension type: unbraked axle up to 750 kg Number of axles: 1 Sidewalls: steel Braked: no Sidewall height: 300 mm Load floor type: phenolic plywood Tilting mechanism: yes Application: relocation, internal goods transport Unladen weight: 129 kg Total payload: 620 kg Plug type: 7-pin, adapter from 13-pin to 7-pin possible GVW min.: 300 kg Reversing light: no UNITRAILER Garden Trailer 230 TILT What’s new with our latest TILT model? Our new model has finally arrived! The new TILT series features upgraded characteristics: - The new model is not only equipped with a new hinge structure for the sidewalls, but also features a unique, newly designed sidewall. Psdpfx Asir H Sqonpogu - The ribbed surface of the sidewalls ensures safe usage and no sharp edges. - The lower edge of each sidewall is flattened to enhance your safety during loading and unloading. - The new sidewalls are 30 cm high, making them more compact than ever! - We've made this model even more user-friendly. It now features improvements such as better-spaced tarpaulin rope hooks and an enhanced foldable drawbar design, significantly reducing the storage space required for the trailer. - The frame hoop has been redesigned, making the frame beams easier to assemble. When you purchase our trailer set with high frame hoops, you receive more vertical beams, increasing the stability of the entire structure—no more water pooling on the cover! - This model includes revolutionary rear wall stops, enhancing the security of the tailgate when the trailer is stored upright. This not only saves space but also ensures the integrity of your tailgate. The UNITRAILER Garden Trailer 230 is our latest transport trailer. This model is currently our second-largest car trailer with a GVW up to 750 kg. The trailer features a fold-down tailgate, allowing for loading and unloading within minutes. The use of a tiltable drawbar allows the trailer to be stored vertically on its tailgate. We handle all the administrative formalities associated with the purchase for you. The trailer is delivered to your specified address together with all registration documents within 5 working days. Once you receive the trailer, you only need to register it to be able to use it fully. The purchased car trailer is shipped within 48 hours with the complete set of documentation. Order online now! The car trailer is tilt-featured and extremely robust. Shipping from: €129

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Baty SM300 Profile Projector – Compact and Precise Optical Inspection Pedouyh N Sopfx Anpjgu The Baty SM300 profile projector is a versatile and precise projector, specifically developed for demanding quality control in workshop or production environments. With a vertical light path and a 300 mm screen, it is ideal for inspecting small and medium-sized components. The SM300 offers high resolution of 0.5 microns and a measuring range of 150 mm x 50 mm, allowing for detailed and accurate measurement of parts. The device is available with various magnification lenses, including 10x, 20x, 50x, and 100x, to meet your specific inspection requirements. The GMR display, which provides complete geometric measurement capabilities, is available as a display option for this profile projector. These features make the SM300 an ideal choice for use in quality control, where precision and efficiency are critical. Features: - 300 mm screen with finely ground glass for clear projections. - Rugged design suitable for use in harsh environments. - Magnification options: 10x, 20x, 50x, 100x. - Measuring range of 150 mm x 50 mm with a resolution of 0.5 microns. - Integrated profile and surface illumination for sharp and precise images. - Digital angle measurement and comprehensive geometric measurement functions with the GMR display system. The SM300 is particularly suitable for workshops where reliable and precise inspection is required. Its robust construction ensures a long service life and consistently high measurement accuracy, even under challenging conditions.

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. Pgjdponh R Ekefx Anpsu TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The DANIBRUM SIP series of brush sanding machines provides a comprehensive solution for professional finishing of wooden panels, MDF, milled or composite materials. Encompassing the SIP610, SIP810, SIP813, and SIP1013 models, the range caters to the varying requirements of woodworking shops as well as medium and large industrial facilities. The SIP610 is an automatic brush sander designed with state-of-the-art technology for precise finishing of both flat and contoured surfaces. This equipment is ideal for rounding sharp edges, removing fine dust from surfaces, and preparing workpieces for painting or lacquering. Whether used in a medium-sized workshop or an industrial production line, the SIP610 ensures consistent output and uniform finish quality, with minimal manual intervention required. High-quality brushes deliver precisely controlled and adjustable pressure, enabling efficient removal of imperfections without damaging the material. Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is user-friendly, even for less experienced operators. Preset programs allow for quick adaptation to different types of materials. Thanks to SICK brand encoders and an electric adjustment system for the working units, highly accurate positioning can be achieved, with a deviation of just 0.1 mm. From solid wood to MDF and composite panels, the SIP610 can be successfully employed for a wide range of applications, delivering consistently superior results. Individual electric adjustment for each sanding head allows fine tuning according to the material Rotating discs with dual rotation direction and oscillation for full coverage of the workpiece Synchronously oscillating drums, ensuring uniform contact with the surface Fast Release system for sanding discs Side-extractable working units for easy maintenance and quick brush replacement High-traction rubberized feed belt with a machined profile for optimal grip Timing belt drive with gearbox for oscillation, reducing vibration and noise Recirculating ball linear guides for smooth, precise movement Schneider electrical components and XINJE frequency inverters ensure reliability and consistent control Ergonomic pivoting control panel allows intuitive operation from various positions LED lighting for increased visibility in the work area Built on a solid steel frame, the SIP610 is engineered to withstand demanding industrial environments. The four vertical cylinders supporting each sanding unit deliver evenly distributed pressure, reducing wear and tear. While the SIP610 is recommended for medium workshops or industrial environments with continuous production, the SIP810, 813, and 1013 models are designed for more complex requirements or higher workloads. Psdpewgw Tzefx Anpsgu All SIP models feature similar advanced digital control technologies, efficient extraction systems, and industrial-grade components. With automated features, precise control, and adaptability to a variety of panel types, the SIP610 is a reliable partner for any production environment. With the addition of the SIP810, SIP813, and SIP1013 models, the SIP series fully meets the needs of the modern woodworking industry. Technical support available in Romanian, English, and German.

Stanje: novo, Leto izdelave: 2025, Premer cevi (maks.): 48 mm, moč: 0,55 kW (0,75 KM), vhodna napetost: 400 V, Bei Duralbend fertigen wir hochwertige Entgratmaschinen, die auf die Anforderungen verschiedener Branchen zugeschnitten sind. Das Entgraten ist ein entscheidender Prozess zur Entfernung von scharfen Kanten und Oberflächenfehlern an Metallrohren, um eine saubere und glatte Oberfläche zu gewährleisten. Unsere Entgratmaschinen, die Rohrdurchmesser bis zu 48 mm und 60 mm bearbeiten können, sind ideal für Branchen wie die Automobilindustrie, Möbelherstellung und das Baugewerbe geeignet. Pgjdjvx D Ecspfx Anpou

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Št: 11155. 2021 Horizon Stitchliner Mark III Najnovejša generacija, popolnoma avtomatiziran sistem za zlaganje listov in izdelavo brošur s sponkami. Lastnosti: Enostavna in hitra nastavitev, ki jo lahko izvede tudi neusposobljen operater. Deluje z ravnimi listi, ki so razdeljeni na bloke po 4 strani. Ni potrebnega predhodnega pregibanja. Integriran avtomatiziran sistem za nastavitev z rezilom (3 rezila). Visokokakovostne brošure z jasno definiranim hrbtom. Sestava: 30 postaj (1 x VAC 1000Ha + 2 x VAC 1000Hm) – 10-postajna stolpna enota za zlaganje s sesalnim sistemom z upravljanjem na dotik, nadzorom za dvojne in manjkajoče liste. Psdsz Hz Evjpfx Anpegu ST-40 – enota za zlaganje Akumulator/enota za pregibanje ACF-40 z dvojnim preklopnim mehanizmom; SPF-40 – enota za spenjanje s sponkami z 2 x spenjalnimi glavami Hohner 43/6S; HTS-40 – rezalna enota s tremi rezili PK-30 – enota za izmet Transportni trak za izmet. Specifikacije: Največja velikost lista: (portretna orientacija: 356 × 508 mm) (ležeča orientacija: 267 × 610 mm) Najmanjša velikost lista: 140 × 194 mm Končna velikost brošure (približno): Največja: 352 × 303 mm Najmanjša: 120 × 85 mm Tipični formati: A3, A4, A5, B4, B5 Gramatura papirja: nepremazan: 52–350 g/m²/ premazan: 73–350 g/m² Največja debelina sponke: 5 mm Ekvivalentno ~10 mm debelini brošure (~50 listov papirja z gramaturo 80 g/m²) Spenjanje z zanko: največja debelina sponke ~3 mm Debelina žice: običajno 0,4 – 0,6 mm (razpon št. 24–27) Širina obrezovanja: 2 – 25,4 mm Največja debelina obrezovanja: 10 mm Največja hitrost: do 6.000 brošur na uro A4 (ležeča orientacija): 5.300/uro

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1600mm, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 100 mm, najv. debelina jeklene pločevine: 100 mm, maks. debelina aluminijaste pločevine: 100 mm, najv. debelina bakrene pločevine: 100 mm, maks. debelina medeninaste pločevine: 100 mm, skupna dolžina: 5.000 mm, skupna širina: 2.200 mm, skupna višina: 2.600 mm, skupna masa: 8 kg, vhodna napetost: 380 V, dolžina mize: 4.300 mm, širina mize: 1.600 mm, višina obdelovanca (maks.): 100 mm, vhodna frekvenca: 50 Hz, širina obdelovanca (maks.): 1.600 mm, dolžina obdelovanca (maks.): 2.000 mm, višina mize: 1.000 mm, potrebna širina: 300 mm, vhodni tok: 70 A, Ključne prednosti ✅ Izjemno velika širina obdelave 1600 mm za serijsko proizvodnjo velikih obdelovancev ✅ Multifunkcijska naprava 3 v 1: odstranjevanje ostrih robov, faziranje in brušenje, ena naprava za več uporab ✅ Popolnoma avtomatska obdelava v enem prehodu, visoka učinkovitost in stabilna natančnost ✅ Velika prilagodljivost za različne kovinske materiale in industrijske scenarije ✅ Nastavljivi parametri za podporo prilagojenim končnim obdelavam Pgodpfx Anez Ii H Dopeu ✅ Robustna konstrukcija, nizka stopnja okvar in odlično razmerje med ceno in zmogljivostjo Ključne zmogljivosti in funkcionalne lastnosti 1. Izjemno velika delovna širina 1600 mm za proizvodnjo v velikih količinah Naprava ima delovno širino 1600 mm, kar omogoča obdelavo velikih kovinskih pločevin in obdelovancev v enem prehodu. Primeren je za obdelavo celotne širine v neprekinjenem toku, pa tudi za serijsko obdelavo majhnih in srednje velikih delov, kar zagotavlja odlično prilagodljivost proizvodnje in visoko kompatibilnost. Optimiziran transportni sistem zagotavlja stabilen in sinhroni prenos obdelovancev po celotni širini, kar preprečuje odstopanja od položaja, nepopolno obdelavo in nestanovitno natančnost. Zmanjšuje ponavljajoče se postopke vpenjanja in pozicioniranja, skrajšuje proizvodne cikle in je popolnoma primeren za množično obdelavo velikih kovinskih komponent. 2. Popolnoma avtomatsko odstranjevanje ostrih robov (brez ostankov) Naprava je opremljena z visokimi gostotami fleksibilnih abrazivnih čopičev in večsmernimi brusnimi sestavi, kar omogoča popolno odstranjevanje ostrih robov na zgornjih in spodnjih površinah ter na robovih. Učinkovito odstranjuje trde ostre robove, odlitke, ostanke po rezanju in oksidacijske plasti, ki nastanejo pri obdelavi in stiskanju kovin. Z inteligentno nastavljivo hitrostjo in nadzorom konstantnega tlaka se sistem prilagodi različnim kovinskim materialom in različnim debelinam ostrih robov za ciljno obdelavo. Popolnoma odstrani ostre robove, ne da bi pri tem poškodoval osnovni material obdelovanca ali izvirno dimenzijsko toleranco, kar zagotavlja gladke in čiste površine, ki ustrezajo strogim industrijskim standardom za montažo in natančno proizvodnjo. 3. Nastavljivo faziranje za standardizirano obdelavo robov Naprava omogoča prilagodljivo faziranje in zaobljanje robov s prosto nastavljivim kotom in velikostjo. Zagotavlja enakomerno in gladko faziranje na ravnih, ukrivljenih in nepravilnih robovih obdelovancev, kar rešuje težave neenakomernosti, nizke učinkovitosti in slabe natančnosti pri ročnem faziranju. Visoko natančna konstrukcija stroja z fiksnim kotom zagotavlja identično natančnost faziranja za vsak obdelovanec. Optimizirana obdelava robov učinkovito odstranjuje ostre robove, kar izboljšuje varnost obdelovancev, prileganje pri montaži in kakovost površine. Široko se uporablja za mehanske dele, strojno opremo, električne ohišja, avtomobilske kovinske komponente in splošne kovinske izdelke. 4. Enakomerna obdelava z brušenjem za vrhunsko kovinsko teksturo Naprava je opremljena s profesionalnim modulom za brušenje, ki ustvarja nežne, enakomerne in estetske linearne teksture na nerjavnem jeklu, ogljikovem jeklu, aluminijevi zlitini, bakru in drugih kovinskih površinah. Učinkovito odstranjuje sledove orodij, praske po brušenju, sledove oksidacije in neenakomernosti na površini. Globina brušenja in hrapavost površine sta natančno nastavljivi, kar omogoča fino brušenje v ravni liniji, mat brušenje in prilagojene površinske učinke.

Leto izdelave: 2025, obratovalne ure: 1 h, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SFERA21Kommission4, Stretch wrapper ATLANTA SFERA Easy 6 individually programmable programs Wrapping height: 2200 mm Mast height: 2050 mm (fits through almost any door) FE electromagnetic film brake Film tension electronically controlled via control unit Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76mm GMK (compass): Start and end points of wrapping always identical Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series 160 pallets per charge – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or by measurement input on display Protective bar for emergency stop on drive unit Emergency stop switch in accordance with CE regulations Acoustic warning and flashing light at machine startup Fall protection for film carriage Push-button for start & stop Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL: All function parameters adjustable via display F00 - Display lock for program modification F02 - Adjustable machine speed around the pallet up to 80 m/min Carriage ascent and descent speeds adjustable independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Setting of pallet wrapping height F13 - F16 - Film tension for base/top wraps and ascent/descent independently adjustable F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL: 6 programmable wrap cycles for SFERA EASY F01-1 - Cross wrapping (up/down) F01-2 - Simple wrapping (up or down only) F10 - F11 - Wrapping cycle with specified start and stop height F12 - Wrapping to a preset height (disabling the height photoelectric sensor) F21 - Wrapping cycle for large dimension pallets Pgedpfxjz Inavj Anpju F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for corner protection application F30 - F31 - Reinforced wrapping cycle with adjustable number of wraps Soft start function to reduce film tears on sharp pallet corners Wrapping cycle with manual or motor-driven rope forming (optional) Optional photo sensor for dark goods *Leasing: Term 48 months // 0 down payment Unit was in operation as a replacement device at a customer for 3 months. Has a few scratches – also on the housing – see pictures. Unit is in excellent condition. We are happy to send you further images. Unit can be inspected in Ludwigsburg by appointment. Available immediately. Price ex stock Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – charging time: 8–10 hours - High-frequency battery charger with LED display - Wrapping height “machine with mast (pallet included): 2,150 mm - Height detection via photoelectric sensor or manual input on the display - Safety bar for emergency stop of drive system - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light on machine start-up - Fall protection for the film carriage - Push buttons for Start & Stop - Machine function per CE regulations Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: - All operating parameters adjustable via display - F00 – Display lock for program change - F02 – Adjustable machine speed around the pallet up to 80 m/min - Carriage speed up/down independently adjustable - F03 – Carriage speed upwards from 1.3 to 5.4 m/min - F04 – Carriage speed downwards from 1.3 to 5.4 m/min - F05 – Number of wraps at pallet base (1–10 wraps) Pgodpsz Induefx Anpju - F06 – Number of wraps at pallet top (1–10 wraps) - F09 – Pallet wrap height setting - F13–F16 – Film application tension for foot & head wrapping / upward & downward travel adjustable independently - F17–F20 – Film pre-stretch for foot & head wrapping / upward & downward travel adjustable independently - F62 – Ergonomic height for film change - Display of film consumption (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 – Cross wrapping (upwards/downwards) - F01-2 – Simple wrapping (upwards or downwards only) - F10–F11 – Wrapping cycle with predefined start and stop height - F12 – Wrapping to a stored height (with deactivation of photoelectric sensor for height) - F21 – Wrapping cycle for large pallets - F22 / F23 – Wrapping cycle for top sheet - F29 – Softstart cycle for application of edge protection - F30–F31 – Wrapping cycle with reinforcement and adjustable wrap count - Softstart to reduce film tears on sharp pallet edges - Wrapping cycle with manual or motorized rope forming (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Brake manually adjustable from the carriage using tension roller - Film specifications: Max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm - Option: Stretch film with core Ø50 mm or coreless stretch film - Standard connection values: 230 V – 1L+N+PE – 50 Hz Available options: - Wrapping height up to 3,500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic rope forming for wrap reinforcement - Automatic cutting system to produce 3 strips for “BANDEROLL WRAPS” - Cold-store version for operating temperatures down to -5° C - BATTERIES: LITHIUM RELION 2 x 12V Additional units available from stock in Ludwigsburg. Image may differ from actual product.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi3, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at wrap start and at end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for film carriage Push buttons for machine power on, start & stop functions, reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program change F02 - Stepless turntable speed adjustment 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage ascent speed from 1.3 to 5.4 m/min F04 - Carriage descent speed from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 turns) F06 - Number of wraps at pallet top (1 - 10 turns) F09 - Photo eye delay for wrapping height F13 - F16 - Film tension for foot & head wrap / up & down wrap independently adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 savable wrapping programs F01-1 - Cross wrapping (upward/downward) F01-2 - Simple wrapping (up or down only) F01-3 - Push button for manual functions F10-F11 - Wrapping cycle with preset start and stop height F12 - Wrapping to a stored height (deactivates height photo sensor) F22 / F23 - Wrapping cycle for top sheet F29 - Soft start cycle for edge protection placement F30-F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet corners Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on film carriage Film specification: max. outside diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total output: 1.2 kW / 6A Optionally available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Built-in frame Photo sensor for black products Cutting device etc. Other units available from stock in Ludwigsburg. Images may show options subject to additional charge. Pgedez Ipclspfx Anpsu

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height 500 mm – core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Options available: Ramp OPRS film carriage with PreStretch 200% Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optionally 1650 mm) Wrapping height (including pallet) 2,200 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed upward/downward Acoustic signal at start of wrapping and cycle end Emergency stop switch, CE compliant Turntable always stops at the same home position Fall protection for film carriage Pushbutton for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON OPERATOR PANEL All functional parameters adjustable via display F00 – Display lock for program change F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speed for up and down independently adjustable F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor wrapping height delay F13–F16 – Film tension for bottom/top wraps & ascent/descent independently adjustable Pgedpfx Ajz Ipdvonpju F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE OPERATOR PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (up only or down only) F01-3 – Pushbutton for manual functions F10–F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated) F22/F23 – Wrapping cycle for top sheet F29 – Soft start cycle for edge protection application F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via pushbutton Further machines available from stock in Ludwigsburg.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S25NEOS05, Mobile Stretch Wrapper NEOS TECHNICAL DETAILS: HMI touch panel 7" Two maintenance-free AGM batteries 12 V – 120 Ah, connected in series Standard charger: 230 V - 1L+N+PE - 50 Hz Autonomy: 200 - 300 pallets per charge High-frequency battery charger with LED display Wrapping height (including pallet): 2,150 mm Height detection via photoelectric sensor or manual input at the display Protective bar for emergency stop of drive system Emergency stop switch in accordance with CE regulations Audible warning signal and warning light at machine start Fall protection for film carriage Push button for start & stop function according to CE standards, Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: F01 - 01 - Cross wrapping (upwards/downwards) F01 - 02 - Simple wrapping (upwards or downwards only) F01 - 03 - Full wrapping cycle with bottom wraps at the same start height F01 - 04 - Quick cycle (with limited or no film overlap) Pgedez Ipk Nspfx Anpou F01 - 05 - Layer cycle F01 - 06 - Economy wrapping program Soft start cycle for application of edge protectors Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized roping (optional) ADJUSTABLE PARAMETERS VIA CONTROL PANEL: 99 programmable wrapping cycles All function parameters adjustable via display F00 - Display lock for program modification Adjustable machine travel speed around the pallet up to 90 m/min Carriage speed up and down adjustable independently Carriage up speed: 1.3 to 5.4 m/min Carriage down speed: 1.3 to 5.4 m/min Number of bottom wraps (1 – 10 wraps) Number of top wraps (1 – 10 wraps) Adjustment for pallet wrapping height Film tension for bottom & top wrap / ascent & descent independently adjustable Film pre-stretch for bottom & top wrap / ascent & descent independently adjustable Ergonomic height for film replacement Film consumption display (option for PRS – PS) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE: Brake tension manually adjustable by tension roller directly on carriage Film specification: Max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm Optional: stretch film with core Ø50 mm or coreless stretch film Standard connection: 230 V - 1L+N+PE - 50 Hz Options available: -Wrapping height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% -FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120-400% -PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic film blowing and cutting, incl. infrared remote control -Manual roping device on film carriage for reinforcement -Automatic cutting unit (FE, PRS & PS) -Version for operation down to -5° C (only available without HMI touch panel) Other machines available immediately from Ludwigsburg stock Image for reference only.

Leto izdelave: 2026, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope forming attached to the frame for pallet reinforcement TECHNICAL DETAILS: Low-profile turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Audible signal at cycle start and stop Emergency stop button in accordance with CE regulations Turntable always stops at same home position Carriage anti-fall safety device Push buttons for machine on/off, start/stop & reset according to CE standards, Ø 22 mm Pgodpfxez Ipnhs Anpeu ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display/program change lock F02 - Infinitely adjustable turntable speed, 5–12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Delay on photocell for wrapping height F13–F16 - Film tension (base/top wraps and up/downwards) independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS 6 storable wrapping programs F01-1 - Cross wrapping (up/down) F01-2 - Simple wrap (up only or down only) F01-3 - Push button for manual functions F10/F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to preset height (with photocell deactivated) F22/F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for edge protection application F30/F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set at 200% Film tension electronically controlled through control unit Film specification: max. outer diameter Ø250 mm, height = 500 mm, core Ø76 mm Standard connection: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300% available Further units available from stock in Ludwigsburg.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with flat turntable Turntable height: 25 mm Short ramp: 500 mm in length TECHNICAL DETAILS: Turntable, LOW PROFILE · Height: 25 mm · Maximum pallet dimensions: 1000 x 1200 mm · Maximum load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Pgjdpfx Anjz Ipwcjpou Height detection by light sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable for upward/downward movement Signal tone at wrap start and end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Infinitely variable turntable speed: 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / ascent & descent independently adjustable F62 – Ergonomic height for film change Display of film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (upward/downward) F01-2 – Simple wrapping (up only or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with defined start and stop height F12 – Wrapping to a preset height (deactivates light sensor height detection) F22/F23 – Wrapping cycle for top sheet film F29 – Soft-start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle by push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Additional units available from stock in Ludwigsburg.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), številka stroja/vozila: S23Synthesi07, StretchWickler Synthesi KnickArm TEHNIČNE PODROBNOSTI Vrtljiv ploščad / Osnovna konstrukcija / Ø 1.500 mm Maks. dimenzije palete: 800 x 1.200 mm Maks. nosilnost: 2.000 kg Višina ovijanja (vključno s paleto) 2.200 mm (opcijsko do 2.400 mm) Višina vrtljivega ploščada 75 mm Preverjanje višine s svetlobnim senzorjem Frekvenčno reguliran pogon vrtljivega ploščada (mehak zagon – vklop/izklop) Frekvenčno regulirana hitrost dvigalne tirnice navzgor/navzdol Zvočni signal ob začetku in koncu ovijanja Gumb za nujni postanek v skladu s standardi CE Ustavitev vrtljivega ploščada vedno v istem začetnem položaju Zaščita proti padcu za tirnico folije Tipkalo za vklop stroja ter funkcijo vklopa in izklopa ter ponastavitev v skladu s standardi CE, premer 22 mm NASTAVLJIVI PARAMETRI NA NADZORNI PLOŠČI Vsi funkcionalni parametri so nastavljivi preko zaslona F00 – Zaklepanje zaslona, sprememba programa F02 – Stopenjsko regulirana hitrost vrtljivega ploščada 5-12 vrt/min Hitrost dvigalne tirnice navzgor in navzdol, nastavljiva neodvisno druga od druge F03 – Hitrost dvigalne tirnice navzgor od 1,3 do 5,4 m/min F04 – Hitrost dvigalne tirnice navzdol od 1,3 do 5,4 m/min F05 – Število ovojev na dnu palete (1–10 ovojev) F06 – Število ovojev na vrhu palete (1–10 ovojev) F09 – Zamuda svetlobne celice, višina ovijanja F13 – F16 – Napetost folije pri ovijanju dna in vrha / dvig in spuščanje, nastavljivo neodvisno F62 – Ergonomska višina za menjavo folije Psdpfx Ajz Iqtfjnpogu Prikaz porabe folije (opcijsko) NASTAVLJIVI PROGRAMI OVIJANJA NA NADZORNI PLOŠČI 6 programov ovijanja, ki jih je mogoče shraniti F01 - 1 - Križno ovijanje (navzgor/navzdol) F01 - 2 - Enostavno ovijanje (samo navzgor ali samo navzdol) F01 - 3 - Tipkalo za ročne funkcije F10 - F11 - Cikel ovijanja z določeno začetno in končno višino F12 - Ovijanje na določeno prednastavljeno višino (ob izklopu svetlobnega senzorja za višino) F22 / F23 - Cikel ovijanja za zaščitno folijo F29 - Mehak začetni cikel za pritrditev zaščite robov F30 - F31 - Cikel ovijanja z okrepitvijo in nastavljivim številom ovojev Mehak zagon za zmanjšanje trganja folije pri ostrih robovih palete Cikel ovijanja z ročno ali motorično tvorbo vrvice (opcijsko) Okrepitveni cikel s pomočjo tipkala TIRNICA ZA FOLIJO TIPA „FM“ Z MEHANSKO ZAVORO preko ročno nastavljivega zavornega valja na tirnici folije Specifikacija folije: maks. zunanji premer Ø 250 mm – notranji premer Ø 76 mm – višina = 500 mm Standardne vrednosti priključkov: 230 V - 1L+N+PE - 50 Hz Skupna moč: 1,2 kW / 6A Na voljo tudi: TIRNICA ZA FOLIJO TIPA „OPRS – ONE PRE STRETCH“ Razmerje prednapetosti folije nastavljeno na 200 % Velikost vrtljivega ploščada do Ø 2600 mm Višina jambora do 3900 mm Rampa Montažni okvir Svetlobni senzor za črne izdelke Naprava za odrezovanje itd. Druge naprave so na voljo v skladišču v Ludwigsburgu. Slike lahko vsebujejo nekatere opcijske možnosti, ki so dodatno plačljive.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Tehnični podatki Številka izdelka SK 11-320 Leto izdelave 2006 Dolžina rezila/lista: 517 mm Višina: 900 mm Širina: 750 mm Dolžina: 980 mm Moč: 1 kW Napajanje: Električno, 400V 50Hz 3N Odblačilni stroj Townsend SK 11-320 je kompaktna, visokokakovostna naprava za odstranjevanje membran z vseh vrst mesa. Namenjena je mesnicam in proizvodnim obratom. Stroj ima vgrajen nož dolžine 517 mm. Naprava je enostavna za čiščenje in upravljanje. Za razstavljanje in čiščenje niso potrebna nobena orodja. Za več informacij in video posnetkov jih lahko pošljem na elektronski naslov zainteresiranih. Psdpfoxdvq Rjx Anpjgu Naprava je v idealnem stanju brez kakršnih koli napak, po celovitem servisu. Valj je zelo oster. Nova ležaja in tesnila.