Hübner Tdp 0,2Lt-4 Analog Tachogenerator + Hübner Fsl Fliehkraftschalter nakup rabljenega (59.879)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, 1. Weishaupt plinski gorilnik WM-G10 / 4-A. Z plinsko progo Dungs DN 50. Izvedba: ZM Leto izdelave: 2011 Moč: 110 - 1250 kW. Priključni tlak: 15-500 mbar. 2. Bdjdpfxszaa Uao Altsf Weishaupt plinski gorilnik WM-G10 / 4-A. Z plinsko progo Dungs DN 50. Izvedba: ZM Leto izdelave: 2005 Moč: 120 - 1250 kW. Priključni tlak: 15-500 mbar.

Stanje: rabljeno, prevoženi kilometri: 1.712.000 km, moč: 309 kW (420,12 KM), prva registracija: 07/2005, vrsta goriva: dizel, skupna masa: 18.600 kg, konfiguracija osi: 2 osi, zavore: retarder, vrsta prenosa: mehanski, emisijski razred: Euro 4, Leto izdelave: 2005, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, parkirni grelec, Informacije v slovenščini: Dodatne informacije: * Nosilnost: 11390 kg * Višina: 3900 mm * Širina: 2550 mm * Dolžina: 5940 mm * Tip | Prva os: Goodyear R * Velikost pnevmatike | Prva os: 355/50 R22.5 * Globina profila pnevmatike znotraj leve | Prva os: 40 % * Globina profila pnevmatike znotraj desne | Prva os: 40 % * Največja obremenitev osi | Prva os: 7100 kg * Tip | Druga os: Michelin R * Velikost pnevmatike | Druga os: 315/60 R22.5 * Globina profila pnevmatike zunaj leve | Druga os: 40 % * Globina profila pnevmatike znotraj leve | Druga os: 40 % * Globina profila pnevmatike zunaj desne | Druga os: 40 % * Globina profila pnevmatike znotraj desne | Druga os: 40 % * Največja obremenitev osi | Druga os: 11500 kg * Medosna razdalja: 370 cm * Kabina: Da * Položaj | Prva os: Spredaj * Znamka | Prva os: Druga * Tip zavore | Prva os: Kolutne zavore * Vzmetenje | Prva os: Zračno vzmetenje * Krmiljena | Prva os: Da * Položaj | Druga os: Zadaj * Znamka | Druga os: Druga * Tip zavore | Druga os: Kolutne zavore * Vzmetenje | Druga os: Zračno vzmetenje * Prestavno razmerje | Druga os: Enostavno prestavno razmerje * Dvojne pnevmatike | Druga os: Da * Pogon | Druga os: Da * Blokada diferenciala | Druga os: Da Dodatna oprema: * Sistem proti blokiranju koles (ABS) * Sistem za nadzor pogonske moči (ASR) * Samodejna klimatska naprava * Zadnji spojler * Blokada diferenciala * Dvojni rezervoar za gorivo * Električni pomik stekel * Električno nastavljiva zunanja ogledala * Elektronski zavorni sistem (EBS) * Sistem za nadzor stabilnosti (ESP) * Sistem za nadzor hitrosti * Spletna stran Bedpfxozi I Sqo Altsdf * Hladilnik * Zračno vzmetenje * Meglenke * Filter trdnih delcev * Radio/predvajalnik CD * Zaviranje s pomočjo retarderja * Kolutne zavore * SemCollection * Avtonomni grelec * Avtonomna klimatska naprava Semtrade B.V. Kontakt | Martin Klaaijsen | Tel: | Whatsapp: | E-pošta: Izvozne stroške | Prosimo, da se vnaprej pozanimate o stroških in postopkih v vaši državi. Lokacija | Maasdijk (NL) | 140 km od meje | 20 km od letališča Rotterdam The Hague. Izjava o omejitvi odgovornosti: Pridržujemo si pravico do sprememb, medprodaje in napak.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, Format 4 Kappa 450 x-Motion 2-osno upravljanje, višina in nagib Tehnični podatki: - Dolžina reza: 2800 mm - Širina reza: 1300 mm Bodpjy Rp D Tjfx Altjdf - Višina reza: 155 mm - Maks. premer žaginega lista: 450 mm - X-motion upravljanje - Kotna lestvica z dolžinsko kompenzacijo - Možnost odsesavanja Ø 120 mm - Moč motorja: 10 kW - Leto izdelave: 2025 Duplex kotni prislon

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Bdsdpfxjwg R I Es Altef Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////

Stanje: novo, Ponujam profesionalno črpalko za sodčke priznanega nemškega proizvajalca Lutz – namenjeno delu z različnimi tekočinami (kemikalije, olja, industrijski mediji). ✅ Stanje: ✔️ Novo ✔️ Ohišje motorja je bilo zamenjano z originalnim (tovarniškim) – prejšnje je bilo poškodovano med transportom ✔️ Popolnoma delujoča, pripravljena za uporabo 🔩 Tehnični podatki: Proizvajalec: Lutz Pumpen GmbH (Nemčija) Model črpalke: MP PP 50/41-R DL SS Motor: MI 4-230 Napajanje: 220–230 V / 50 Hz Moč: 450–500 W Tok: 2,5 A Zaščitni razred: IP24 Dolžina cevi: 1200 mm Material: PP (polipropilen) + nerjavno jeklo (SS) ⚙️ Uporaba: Bodpfxjyzulws Altjdf industrijska kemija olja, tehnične tekočine industrija, delavnice, proizvodnja praznjenje sodov in rezervoarjev 📦 Komplet vsebuje: ✔️ Črpalka Lutz ✔️ Motor MI 4-230 ✔️ Cev + oprema, vidna na slikah 🌍 Država izvora: 🇩🇪 Nemčija ℹ️ Dodatne informacije: Visokokakovostna oprema – nemška proizvodnja Idealno za profesionalno uporabo Možnost pošiljanja ali osebnega prevzema

Stanje: zelo dobro (rabljeno), Naprodaj električni motor podjetja Kaltenbach Maschinenfabrik Cena velja za 1 kos Stanje: uporabljen, delujoč Motor preverjen s testerjem Bjdpfsyv Uvxjx Altedf Vidne običajne sledi uporabe in skladiščenja Tehnični podatki: Proizvajalec: Kaltenbach Maschinenfabrik Tip: DKV 112M 238 4 Trifazni motor Moč: 1,7 / 2,6 kW Napetost: 400 V, 50 Hz Zaščita: IP54 Izolacijski razred: F Število vrtljajev: 700 / 1415 obr/min Dahlander večhitrostni motor Premer gredi približno 28 mm

Stanje: zelo dobro (rabljeno), Stanje: rabljeno, delujoče Proizvajalec: BÜHNEN / MELER Model: HB 6050-2 NI120 Bdsdsy Aam Njpfx Altef 📋 Opis stroja: Na prodaj profesionalni lepilni agregat HOT-MELT BÜHNEN / MELER 6050, namenjen industrijskemu nanašanju lepila. Visokokakovostna naprava – evropska proizvodnja, uporablja se v: pakiranju pohištveni industriji lesnopredelovalni industriji proizvodnih linijah ⚙️ Tehnični podatki (iz tablice): Napajanje: 230V / 50-60 Hz 400V (3-fazno) Moč: do 4,7 kW Maks. temperatura: 200°C Maks. tlak: do 160 bar Izhodi: 2 Model: HB 6050-2 NI120 📦 Komplet vključuje: ✔️ Lepilni agregat BÜHNEN / MELER ✔️ 4 grelne cevi (celoten komplet!) ✔️ Kable in priključke, vidne na fotografijah 🔍 Stanje: predmet rabljen normalni znaki uporabe v dobrem tehničnem stanju notranjost rezervoarja vidna na slikah prodaja se natančno kot na fotografijah

Stanje: zelo dobro (rabljeno), Nudim profesionalni lepilni agregat BÜHNEN 6040, namenjen za industrijsko nanašanje lepil (npr. hot-melt). Naprava rabljena, v dobrem tehničnem stanju, z običajnimi sledmi uporabe. Zanesljiva nemška izdelava – idealno za proizvodne obrate, pakirnice, mizarje, tapetnike ipd. ⚙️ Tehnični podatki (iz tablice / vidni na fotografijah) Napajanje: 230V / 50 Hz Moč: 235 W Maks. tlak: do 160 bar Maks. temperatura: do 200°C Model: 6040 Proizvajalec: BÜHNEN GmbH (Nemčija) 📦 V kompletu: ✔️ Lepilni agregat BÜHNEN 6040 ✔️ 4 ogrevane cevi (komplet) Bjdpoy Aagiofx Altodf ✔️ Kabli/priključki vidni na slikah ✔️ Krmilni in priključni elementi 🔍 Tehnično stanje: naprava rabljena vidne običajne sledi uporabe brez vidnih mehanskih poškodb notranjost rezervoarja vidna na fotografijah prodaja točno tako, kot na slikah

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 1.800 h, No. 3131 CNC Machining Centre FORMAT-4 profit H10 22.43 Used, year of manufacture 2017 Operating hours approx. 1800 h Package consisting of CNC Machining Centre FORMAT-4 profit H10 22.43, Feeding Unit FORMAT-4 L-Motion, and Extraction System FELDER RL 300 CNC Machining Centre FORMAT-4 profit H10 22.43 Technical Data: Phenolic resin matrix table system Grid table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control console Handheld terminal for remote axis control Two vacuum pumps, rated output 2 x 250 m3/h Bedpfx Asrrh T Ajltsdf Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24,000 rpm Central extraction via combined connections (D=250mm) Software: Woodflash German (H20/H08/H10/H50) Axis travel H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working area: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Feeding Unit FORMAT-4 L-Motion Technical Data: Year of manufacture 2017 2-axis version with 4 storage positions for loading an H10 with lifting table CNC loading Gentle transport Fully automatic panel handling Workpiece dimensions: Length 2000-4200 mm / Width 600-2100 mm / Thickness from 8 mm / Panel weight 200 kg Density: Chipboard 650 kg/m3 / Raw MDF 750 kg/m3 Stack height 1800 mm Extraction System FELDER RL 300 Technical Data: Year of manufacture 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar at 40 NL/min Operating pressure in the unit 6 bar Chip container volume 500 l Fire extinguishing system with powder extinguisher, 12 kg dry powder extinguisher Sale on behalf of customer, ex location Leipzig, without dismantling, transport, or installation Errors in description and price reserved Dismantling and loading by us is available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; sold as seen Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: novo, Leto izdelave: 2026, vrsta goriva: dizel, proizvajalec motorjev: Kohler KDI2504TCRCAC-SV, Namen uporabe: Gradbeništvo Lastna teža: 1.500 kg Moč generatorja: 50 kVA Bdsdpoynrkcofx Altjf Dimenzije tovornega prostora: 254 x 114 x 165 cm CE oznaka: da Raven emisij: Stage V / Tier IV final Prostornina vodnega rezervoarja: 250 l Država proizvodnje: ES Za več informacij kontaktirajte ekipo DPX. = Druge možnosti in dodatki = - Baterija - Nadzorna plošča - Jeklena streha - Cisterna

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2642308, vrsta goriva: dizel, proizvajalec motorjev: Deutz TD2.9L4-SV, Namen uporabe: Gradbeništvo Lastna teža: 1.400 kg Moč generatorja: 43 kVA Dimenzije tovornega prostora: 230 x 114 x 165 cm CE oznaka: da Emisijski standard: Stage V / Tier IV final Volumen vodnega rezervoarja: 250 l Bdedpfxsyz Irke Altjf Država proizvodnje: ES Za več informacij kontaktirajte ekipo DPX. = Druge možnosti in dodatna oprema = - Baterija - Krmilna plošča - Jeklena streha - Cisterna

Stanje: novo, Leto izdelave: 2026, vrsta goriva: dizel, proizvajalec motorjev: Caterpillar C3.3, Namen uporabe: Gradbeništvo Lastna teža: 851 kg Moč generatorja: 33 kVA Dimenzije nakladalnega prostora: 196 x 90 x 134 cm CE oznaka: da Prostornina vodnega rezervoarja: 50 l Za dodatne informacije kontaktirajte ekipo DPX. = Druge možnosti in dodatna oprema = - Baterija - Nadzorna plošča - Jeklena streha Bjdpfx Aey R I Eveltsdf - Cisternsko vozilo

Stanje: rabljeno, Tool Presetting Device GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of manufacture: 2002 Travel range X-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Tool holder on mounted rotary table: Ø 50 mm Pitch circle diameter of tool holders on mounted rotary table: Ø 340 mm Internal taper on mounted rotary table: Ø 245 mm Tool holding plate as rotary table with 8 mounting holes Ø 50 mm Bedpfx Aohbal Djltedf Centering diameter of installed tool holding plate: Ø 102 mm Rotatably mounted flange holder with centering diameter: Ø 102 mm Rotatably mounted flange holder with outside diameter: Ø 155 mm Rotatably mounted flange holder with 3x M10 mounting holes, pitch circle: Ø 130 mm Power supply: 230 Volt, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circular ground glass plates - Fixed ground glass with crosshairs - Axis movement via manual rapid adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Required space (L x W x H): 1100 x 1000 x 800 mm Weight: 400 kg In good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, 1. WEISHAUPT WM-G10/4-A (z dovodom za plin) - Moč: 100-1100 kW - Izvedba: ZM-LN - Leto izdelave: 2020 2. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2015 (1 kos), 2013 (na voljo 2 kosa) 3. WEISHAUPT WM-G10/2-A - Izvedba: ZM-LN - Moč: 75-630 kW - Leto izdelave: 2021 Bdsdpjwgyrtefx Altsf 4. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 125-900 kW - Izvedba: ZM-LN - Leto izdelave: 2011 5. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2011 6. WEISHAUPT WM-G10/3-A (z dovodom za plin) - Moč: 100-1000 kW - Izvedba: ZM - Leto izdelave: 2009

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm Bsdpfx Aefdkb Tjltedf - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times Bdodpfx Asd Tbbdjltef - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Bdjdsd Tqaljpfx Altof - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) Bdodpfx Aefdkb Ueltsf - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) Bdodpfx Aoguk A Heltef - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Bdjdpfx Asguk Dkeltjf Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) Bedsfdkbhopfx Altodf - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) Bodsguk Dvopfx Altjdf - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, Leto izdelave: 2013, vrsta prenosa: drugo, prva registracija: 01/2013, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: in transit / incoming, Body: ARCHIVE IMAGE Dismantling of Iveco Stralis AT260S46Y/FS 6x2, wheelbase 4,800mm -78220- Bdedpswgbvtsfx Altjf Vehicle has run approx. 150,000 km VIN: WJME2NTH40C272639 Location: A&K ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted!

Stanje: rabljeno, Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, moč: 10 kW (13,60 KM), vhodna napetost: 400 V, potovalna razdalja osi X: 4.050 mm, pomik osi Y: 2.560 mm, pomik po osi Z: 280 mm, dolžina obdelovanca (maks.): 3.120 mm, širina obdelovanca (maks.): 2.160 mm, višina obdelovanca (maks.): 105 mm, število osi: 4, število mest v zalogovniku orodij: 16, Oprema: CE označba, For sale is a highly equipped CNC machining center: FORMAT-4 profit H10 22.32, year of manufacture 2015. This machine is ideally suited for precise machining of wood, MDF, plastics, and panel materials. The FORMAT-4 H10 impresses with high traverse speeds and a robust design. Notable features include the powerful 10 kW HSK-F63 spindle, a 360° C-axis, and a total of 16 tool positions. Technical Data: * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year: 2015 * Machine type: CNC machining center Working area * X-axis: 3,120 mm * Y-axis: 2,160 mm * Z-axis: 105 mm Traverse paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse speeds * X/Y: 100 m/min * Z: 30 m/min Milling spindle Bdedpfx Aey Smi Asltjf * 10 kW HSK-F63 spindle * Speed range: 1,000 – 24,000 rpm * Right- and left-hand rotation * Ceramic bearings * Air-cooled Tool changer * 2 tool changers with a total of 16 tool positions * HSK-F63 holders * Tool positions on the machine stand and arranged laterally Additional units * C-axis 0–360° Vacuum / Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two stop rows Control / Software * FORMAT-4 H10 control * WoodFlash software * DXF import * 3D graphical display * Parametric programming * Tool database for up to 500 tools * Mobile operating panel * Handheld terminal Additional equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for boring head * Operator tools and documentation available Condition: Machine currently in operation, well maintained. Inspection by appointment possible.

Stanje: dober (rabljeno), The delivery includes: 56x stackable transport boxes, used Manufacturer: SSI Schäfer Model: 14/6-4 Version: recessed grips on both sides Color: blue Material: polypropylene External dimensions LxWxH: 210x150x123 mm Internal dimensions LxW: 190x123 mm Bdjdspl Tfwspfx Altef Usable height when stacked: 110 mm Capacity: 2.50 liters Stackable: yes Weight per piece: 0.266 kg Note: These are used stackable transport boxes. Scratches, dirt, and color deviations may be present. Application area: The stackable transport boxes are suitable for storing tools, small hardware, and various small parts. General information about this item: This item is offered for collection only. Any delivery or shipping services desired beyond this will incur additional costs, which can be requested separately from us depending on the delivery location and scope.