Škropilna Naprava nakup rabljenega (6.772)

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: 0701-250008, Röslerjeva transportna tračnica za vzdolžni transport profilov in pločevine. Ta stabilen valjčni transportni sistem je primeren za transport materiala v trgovini z jeklom ali v jekleni konstrukciji. Dolžina transportne valjčne proge je 9,60 m. Transportna proga je pogonska in je bila uporabljena za prevoz jeklenih profilov in pločevine kot povezovalna valjčna proga med Röslerjevim peskalnim strojem in Kaltenbachovo vrtalno-žaginim strojem. Višina Röslerjeve transportne proge je 640 mm, širina valjev je 2700 mm. Premer transportnih valjev je 140 mm. Na željo so za doplačilo na voljo tudi prečni vlačilci kot sistem dvižnih vozičkov. Ljdpfx Asyild Aol Ioab

Leto izdelave: 2023, stanje: rabljeno, številka stroja/vozila: 0799-250012, TM Minibox by Hartner – The compact solution for maximum tool control Laodpfowpr Tnjx Al Ijb Increase your efficiency right at the workstation: The TM Minibox is the smart, space-saving tool dispensing system for your production environment. Whether as an entry point into digital tool management or as a supplement to your existing infrastructure, the TM Minibox will take your production to the next level.

Leto izdelave: 2015, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, The pneumatic butt welding machine type Sv‑63P features a robust vertical structure comprising vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable slides connected to a horizontal cylinder for compressing the workpiece. The movements of the slides are mechanically limited in both directions—for clamping and opening—and the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping at the set jaw distance is controlled via foot pedals. An additional control cabinet with switches and buttons allows for individual or simultaneous clamping and supports both manual and automatic welding. Once welding is complete, the clamping jaws open, and the slides return to their initial position. Welding parameters are set via a controller mounted on the side of the machine. Welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws by laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the machine cover, a compressed air maintenance unit with a pressure regulator is fitted for adjusting the clamping force. The machine’s main power switch is located on the controller used for setting the welding parameters. Lsdsyqr Sxopfx Al Ioab

Stanje: dober (rabljeno), Leto izdelave: 1994, Pomik v osi X 7.300 mm Prehodna širina med stebri 3.100 mm Razdalja od čela vretena do pritrdilne plošče 1.500 mm Ploščno polje 2.500 x 7.000 mm Krmiljenje Heidenhain TNC 415 a samodejni menjalec orodij Ledpfx Aey Ny Dhel Ieab Podpora SR 40, 40 kW, ISO50, 4.000 min-1 Kotna rezkalna glava WFKU, 30 kW, 4.000 min-1 Podaljšek vretena VFL, 30 kW, 4.000 min-1

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, New device with 24 months warranty Stainless steel model Advantages: + Excellent price-performance ratio + Simple and fast installation & operation + Entirely stainless steel housing + Can also be combined with a chilled water system + Device automatically opens the required water supply, hot/cold water + Automatically dispenses the correct mixture until desired temperature is reached + Powerful microprocessor-based electronic system + Water dosing from 0.1 to 99.9 liters or 1 to 999 liters + Temperature fluctuations are automatically compensated + Digital display of water temperature and quantity + Temperature is set via thermostatic mixing valve (rotary knob) + Fast spare parts supply within 1-2 business days Ledpfoivdxmjx Al Isab STANDARD accessories included in price: - 1x drain hose (2 meters length) with hanging hook Technical data: - Dosage volume: 0.1 – 99.9 liters or 1 – 999 liters - Temperature range: 0°C to +40°C (depending on water supply) - Power: 25 W - Water pressure: 2 – 4 bar (recommended) - Connection: 230 V - 1Ph - 50/60Hz - Dimensions: 305 x 120 x 390 mm (W x D x H) - Net weight: 6.8 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, High-quality control cabinet cooling unit from Rittal's TopTherm series in very good used condition. This device is suitable for reliable climate control and cooling of control cabinets and industrial installations. Robust industrial design with a high degree of protection and powerful cooling technology. Manufacturer: Rittal Model: TopTherm SK 3304540 Device type: Control cabinet cooling unit Condition: very good, used Date of manufacture: 10/2018 Serial number: 2018K000166679 Year of construction: 2018 Voltage: 400 V / 50 Hz / 3~ Alternative voltage: 460 V / 60 Hz / 3~ Rated current: 2.2 A Starting current: 11.5 A Circuit breaker: 6.3 – 10 A Power consumption: 0.64 kW Total cooling capacity DIN EN 14511: 1.10 kW Sensible cooling capacity DIN EN 14511: 0.94 kW EER L35 L35: 1.72 Refrigerant: R134a Refrigerant charge: 325 g GWP R134a: 1430 CO2e: 0.46 t Operating temperature range: 10 °C to 55 °C Protection rating (internal circuit): IP54 Protection rating (external circuit): IP34 Weight: 40 kg Hermetically sealed: Yes Leakage tested according to EN-378-2 CE mark present Price per unit; several units available Ledpfxoy Sbvdj Al Ijab

Stanje: rabljeno, Okrogla delilna miza, delilna naprava, strojna okrogla miza Premer mize: 360 mm Višina mize: 130 mm Prenosno razmerje: 120 : 1 Vpenjalna površina: 375 x 430 mm Ledpjy Sbwzjfx Al Ijab Luknjasta mreža vpenjalne površine: 400 x 125 mm, Ø 14 mm - Posredno deljenje z ročnim kolesom na polžnem pogonu, prenosno razmerje: 120:1 - Polžni pogon možno preklopiti za neposredno in posredno deljenje - Zaklepanje z 2 vpenjalnima ročicama v vsakem položaju - Ročica s perforirano ploščo - 1 perforirana plošča s števili lukenj: 22, 24, 29, 36, 37, 49, 57, 63 - 1 perforirana plošča s števili lukenj: 16, 27, 30, 33, 41, 47, 53, 61 - 1 perforirana plošča s števili lukenj: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-reže v mizni plošči - Površina mize rahlo obdelana Skupne dimenzije D x Š x V: 600 x 440 x 130 mm Teža: 81 kg dobro stanje

Leto izdelave: 2026, stanje: rabljeno, NEW Year of manufacture 2026 Automatic loading and unloading station. Suitable for solid wood, MDF, gypsum plasterboards, cement fiber boards, and lumber. Examples: doors, boards, MDF panels, fronts, gypsum boards, facade panels. Adaptations for other products possible. The machine operates at a constant speed and with a preset loading and unloading capacity. This allows you to simply automate your feeding and stacking processes and increase process reliability. The system operates with a 2-circuit vacuum system. Siemens operator panel Technical data: - Manufacturer: Ka-Ma - Model: KR-1300-1 - Working width: 1,300 mm - Including belt conveyor, length 3,000 mm - Working height: 930 +/- 50 mm - PLC control, operation via touch panel, Siemens S7-1200 - Loading and unloading of parts via 2 suction plates, length 442 mm - Automatic signal upon completion of loading process - Max. Horizontal speed: 0.5 m/s - Horizontal stroke: 1,300 mm - Max. Vertical speed: 0.5 m/s - Stacking height: approx. 1,000 mm (incl. pallet under the panel stack) - Loading side: left in direction of travel Ledsy S S Htjpfx Al Isab - Vertical stroke: approx. 1,200 mm - Max. lifting capacity: approx. 85 kg, continuous duty 65 kg - Max. component width: 1,300 mm - Max. component length: approx. 2,850 mm - Max. conveyor speed: stepless up to 10 m/min - Electric motor power: 1.5 kW - Electronic components: Schneider Electric and Siemens - Weight: 1,200 kg Optional: - 2-circuit vacuum system with 4 additional suction cups and preliminary lifting function to raise the panels 15 mm on one side before vertical movement, required for all permeable materials.

Leto izdelave: 1996, stanje: rabljeno, Premični odsesovalnik ostružkov za aluminij ali PVC Lajdpfx Aley Tanhe Isb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2008, obratovalne ure: 7.265 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0866, potovalna razdalja osi X: 550 mm, pomik osi Y: 400 mm, pomik po osi Z: 350 mm, teža obdelovanca (maks.): 1.000 kg, skupna višina: 2.905 mm, skupna širina: 1.740 mm, skupna dolžina: 2.570 mm, skupna masa: 4.700 kg, Oprema: dokumentacija / priročnik, Stroj je redno servisiran, vzdrževan, v odličnem stanju, zelo malo rabljen, kot nov. Ledpfxoy E Nh Us Al Isab Dodatno je opremljen z BOOSTER 80 A , plus avtomatski menjalnik orodij, plus UPS neprekinjeno napajanje , ima C -os selektivno 10. Stroj ima microfinish , polirano ogledalo. Natančnost stroja +-0,001mm. Stroj je priklopljen na električno omrežje in pripravljen na zagon. Stroj se nahaja na naslovu PARECAG 24a, 6333 Sečovlje, Slovenija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, V ponudbi je stroj za lasersko rezanje cevi. Dolžina obdelave X: 6500 mm, maks. premer obdelovanca: 220 mm, moč laserja: 3500 W, izvor žarka: CO2, obratovalne ure: 48817 h, ure laserskega žarka: 9403 h, HF-celica: obnovljena 01/2023. Opremljen z avtomatskim nalagalnikom snopov, izhodno postajo, odsesovalno napravo, hladilno enoto, letno servisiranje proizvajalca dokumentirano. Teža: cca. 9000 kg, skupne mere X/Y/Z: cca. 10500 mm / 4600 mm / 2200 mm. Ogled možen po dogovoru. Ledpfey T N Htjx Al Ieab

Leto izdelave: 1989, stanje: pripravljen za uporabo (rabljen), Process: Nickel strike, alkaline/cyanide zinc; base material: steel, stainless steel; throughput per goods carrier: approx. 11/hour; production time: operating time minus cycle time of the goods carrier; drums per goods carrier: 1; drum inner length: 870 mm; span width: 350 mm; average loading weight per drum: approx. 37 kg; max. loading weight per drum: approx. 50 kg (loading weight depends on the geometric surface area of the parts); anode spacing: 650 mm (700 mm for electrolytic degreasing); operating voltage: 3x 220/380 V, 50 Hz, Mp/SL (-15 to +10%); heating: electric; heat-up time: approx. 5 h at a starting temperature of approx. 15°C; cooling: cooling water; supply: 8°C, return: 12°C; mains water: 2 bar; recirculated water: 2 bar; compressed air: 8 bar; drive/control output: approx. 166 kVA; rectifier output: approx. 240 kVA; heater power: approx. 136 kW; extracted air volume: cyanide/alkaline 12,000 m³/h, acid/alkaline 19,450 m³/h; heat dissipation: approx. 80,000 kcal/h; plant has been completely emptied of all substances; transformers are pollutant-free; complete documentation available. Inspection on site is possible. Lsdpey T N Iqefx Al Isab

Stanje: nepreverjeno (rabljeno), hladilna zmogljivost: 156 kW (212,10 KM), skupna masa: 1.970 kg, Podrobnosti glejte na tipski ploščici Na voljo so večje količine Ledoyzph Hopfx Al Ioab Na voljo tudi v izvedbi 80 kW

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 150 h, Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.920 mm, skupna dolžina: 5.720 mm, skupna višina: 3.360 mm, največja dovoljena obremenitev: 50 kg, ogrevalna zmogljivost: 59 kW (80,22 KM), trajanje garancije: 6 meseci, vhodna frekvenca: 50 Hz, leto zadnje generalne obnove: 2026, 4-chamber ultrasonic cleaning system with automatic goods transport Max. loading weight: 50 kg including basket Usable basket dimensions (internal): 426 x 375 x 470h mm Loading station with trolley 1. Ultrasonic cleaning with bottom and side sonication (25/45 kHz – switchable) 2. Ultrasonic rinsing with bottom sonication (25/45 kHz – switchable) 3. Ultrasonic rinsing with bottom sonication (25/45 kHz – switchable) incl. lift-out function 4. Hot air dryer Unloading station - Tank 1 (ultrasonic cleaning) is also equipped with an overflow and a large, separate oil separator. - Automatic lid on tank 1 Laedpfxey H Uzvs Al Iob - Media filtration on all tanks (via cartridge filter) - Complete system enclosed and with extraction/ventilation - Control: Siemens S7-1500 incl. 12" HMI touch panel - Documentation available in German Connected electrical load: 59 kW The system can also be dismantled and reassembled at a new site by our specialist technicians for an additional charge upon request. Water treatment for tank 4 (final rinse) can be supplied at additional cost. Test cleaning possible at any time, system is powered up.

Stanje: novo, Leto izdelave: 2021, Teža / kg Nosilec MK / Material: železo 200 x 60 x 150 mm Lsdpfxey S Dxhs Al Ieab Velikost odprtine: 150 mm Magnetna sila: 10-20 kg Na zalogi: 4

Stanje: zelo dobro (rabljeno), RTG sortirna naprava. Proizvajalec: TITECH TOMRA Tip: X-TRACT 1200 Leto izdelave: 2012 Naprava je v zelo dobrem stanju. Opravljena je bila popolna prenova. Vir zamenjan: 35.000 € Vsi senzorji zamenjani: 29.000 € Trak zamenjan. Področja uporabe: - Sortiranje kovin - Sortiranje lesa, proizvodnja nadomestnih goriv (EBS) - Sortiranje organskih odpadkov Lajdpfxoy Ra D Re Al Ieb

Stanje: rabljeno, Leto izdelave: 2021, proizvajalec krmilnikov: Siemens, model krmilnika: Simatic, Opis: Lsdpfjy E Ebwjx Al Isab Tehnični podatki: Kapaciteta (maks.): 2.500 l/h

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je avtomatska testna postaja za filtre Lorenz za avtomatsko testiranje filtrirnih medijev, polmask, kanistarskih filtrov in medicinskih obraznih mask. Standardi: EN143/EN149/EN14683/ISO16900-3 in več, modulne komponente: merilnik pretoka/fotometer pred in po preizkušanem izdelku/generator aerosola/enota za sesanje in odsesavanje, aerosoli: parafinsko olje/Emery olje/DOP/DEHS, območje volumenskega pretoka: 8L-300L/min, min. merilno območje filtracijske učinkovitosti: 0,0001%, min. merilno območje dihalnega upora: 5Pa-1000Pa, največja hitrost filtrirnega zraka: 10,2cm/s, največja preizkusna površina: 237,8cm³. Naprava je bila malo uporabljena in ne potrebuje vzdrževanja. Dokumentacija je na voljo. Možen je ogled na lokaciji. Slika je vzorčna. Lasdpfx Asy Tx Sljl Ieb

Stanje: novo, Optični pripomoček za nastavljanje ničelne točke osi Z Za določanje višine v osi Z. Uporaba: Napravo se postavi na obdelovanec, nato se z mirujočim orodjem previdno približamo napravi. Ko zasveti LED-lučka, je dosežena referenčna mera 50 mm. Varnostni vzmetni hod je 2 mm. Ljdpfx Aeym U Twel Ieab Osnovna površina Ø 54 mm Višina 50 mm Merilna površina Ø 15 mm 3 magneti v osnovi Teža 0,35 kg

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Tensión de conexión: 380 V, potencia conectada: 7,5 kVA, consumo energético específico 2 kW/m² Ensayos de intemperismo UV global con espectro global [similar al arco de xenón], pero con lámparas fluorescentes Volumen de la cámara de prueba: 200 litros Superficie de prueba: 0,75 m² Dimensiones de la cámara de prueba (Al x An x Pr): 1100 x 800 x 250 mm Rango de temperatura sin aislamiento: -20°C a +90°C Lodpfxsytr Swe Al Ioab Rango de temperatura con aislamiento: +10°C a +90°C Constancia de temperatura: ±2K Rango de temperatura del punto de rocío: +5°C a +40°C Rango de humedad: aprox. 15 - 95% h.r. Humidificación de muestras con 8 boquillas pulverizadoras El sistema utiliza fuentes de luz UV fluorescente para simular en laboratorio el espectro dañino de la radiación solar, acelerando así los efectos de envejecimiento como cambios de color, pérdida de brillo, formación de grietas, fragilización y degradación del material. Los ciclos programables de exposición UV, control de temperatura y fases opcionales de humedad y condensación reproducen y repiten de forma reproducible las cargas ambientales prácticas. Desmontaje a cargo del comprador.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Upravljalni center za obdelavo profilov, portalni rezkalni stroj Tip: MBZ 72/80-3 Leto izdelave: 2002 Lsdey S Hazspfx Al Ioab Stanje: rabljeno Tehnični podatki: x-os: 7000 mm y-os: 1000 mm z-os: 370 mm Pogonski motor vretena: 6,8 kW Število vrtljajev vretena: 20.000 min⁻¹ Vpenjalna glava: SK30 Vpenjalni vijak DIN 69872 Izmenjevalec orodij: 12 Posebna oprema/dodatki: – Centralno mazanje Vögele – Niels sistem minimalnega mazanja – Vakuumski sistem z 8 vpenjalnimi moduli – 8 vpenjalnih glave za orodje z orodjem – Sonda za merjenje obdelovanca z držalom za orodje – Dokumentacija

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, nosilnost: 2.000 kg, Sideros obračalna naprava, stebrno dvižno obračalno orodje, ena stran premična s pozicionirno mizo. Nosilnost 2 toni. Novo, letnik 2023, neuporabljeno, z daljinskim upravljanjem. Minimalna delovna višina: 350 mm. Maksimalna delovna višina: 1800 mm. Navor: 3000 Nm. Hitrost: 1 obr/min. Hitrost nastavljanja navpično: 560 mm/min. Navpični hod: 1450 mm. Premer vpenjalne plošče: 600 mm. Moč motorja: 4,45 kW. Rotacijsko gibanje: 0,75 kW. Dvižni motor: 1,85 kW. Višina naprave: 2505 mm. Teža pribl. 1050 kg. Stanje kot novo, neuporabljeno. Možna dostava. Vključno z dokumentacijo, načrti ipd. Laodpey Hl H Nofx Al Ijb

Leto izdelave: 2008, stanje: rabljeno, Rabljena industrijska rentgenska preizkusna naprava za neporušno preizkušanje delovnih kosov in nadzor kakovosti s Phoenix x-ray upravljalnim mestom in zaščiteno preizkusno celico. Proizvajalec: phoenix|x-ray Systems + Services GmbH Model: x|argos 160 Tip stroja: Industrijska rentgenska preizkusna naprava Leto izdelave: 2008 Serijska številka: NDT01G0001-131308 Priključek na omrežje: 3x400 VAC Frekvenca: 50/60 Hz Poraba moči: 3000 VA Polni tok obremenitve: 3x4,5 A Zaščitna naprava za kratki stik: 10 A Prekinjalna zmogljivost kratkega stika: 10 kA Rentgenski generator: Gulmay UC225/10 Napetost generatorja: 220 V Frekvenca generatorja: 47–63 Hz Lsdoy S Rwqjpfx Al Ioab Poraba toka generatorja: 2,7 A CE oznaka prisotna Vključno z upravljalno konzolo z monitorji in krmilnim joystickom Zaprta zaščitna kabina pred sevanjem Linearne osi in vrtljiva miza v notranjosti Stanje: rabljeno

Leto izdelave: 2014, stanje: rabljeno, Industrial water treatment and distillation unit for the processing of industrial wastewater and process water, featuring integrated control system, collection tanks, and new pump installed following recent inspection. Manufacturer: H2O GmbH Model: VACUDEST XS-XL Machine type: Industrial water treatment system Year of construction: approx. 2014 Operating manual available Control system with touchscreen HMI USB port available Ethernet port available Serial interface available Industrial PC control New pump installed Recent inspection completed Industrial wastewater collection tank included Laedpfxsy S Rr Us Al Iob Distillate collection tank included Tank material: PP grey Medium: Industrial wastewater Medium: Distillate Medium: Acidic and alkaline aqueous solutions Industrial wastewater tank volume: approx. 10,280 litres Distillate tank volume: approx. 10,732 litres VacuCIP tank volume: approx. 1,306 litres Permissible operating temperature of tanks: 40 °C Permissible operating temperature of VacuCIP tank: 80 °C Specific weight of tanks: 10.00 kN/m³ Specific weight of VacuCIP tank: 11.00 kN/m³ Permissible operating pressure: 0.00 bar VacuCIP alkaline 1.26 pH value: >12 Initial concentration: 1:10 Fully enclosed industrial design Piping and tank system constructed from stainless steel and plastic

Stanje: rabljeno, Leto izdelave: 2020, Load capacity 500 kg Lasdjvg R U Topfx Al Iob Own weight 930 kg Dimensions 1250 x 2590 x 1500 mm Operating manual available For technical data, please refer to the attached PDF.