Šivalni Stroj Za Skrčljive Rokave nakup rabljenega (85.786)

Stanje: rabljeno, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 900 mm, največja hitrost vretena: 1.200 obr/min, hitrost pomika os X: 900 m/min,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Skupna višina: 1350 mm Širina z nadzorno omarico: 850 mm Bwedpfx Ahoza Af Ujnen Globina: 1420 mm Moč motorja: 1,5 / 3,0 kW Premer diska: 200 mm Razrez do: 40 mm

Stanje: novo, Leto izdelave: 2005, Screw diameter: 60 mm Shot weight in polystyrene: 607 g/PS Clamping force: 3200 kN Control system: SELOGICA Mould installation height: 300 mm Mounting platen: 1040 x 1040 mm Opening stroke: 700 mm Total power requirement: 96 kW Machine weight: approx. 17 t Space requirement: approx. 7 x 2.2 x 2.3 m This injection moulding machine is in very good condition, can be inspected at the seller’s site by appointment, and is offered including Multilift H. Bodpsvkqfajfx Ahnewn Operating hours: 42,878 h

Stanje: rabljeno, Dolžina brušenja 600 mm Širina brušenja 200 mm Višina obdelovanca 250 mm Premer brusnega koluta 200 mm Širina brusnega koluta 20 mm Teža stroja ca. 1000 kg Bedpfx Ahju N I Nkenjwn Potrebni prostor ca. 2000 x 1200 x 1650 mm

Stanje: rabljeno, Table length 400 mm Table width 300 mm X-axis travel 300 mm Y-axis travel 250 mm Z-axis travel 250 mm Machine weight approx. 1.2 t Bedpsvwgq Sefx Ahnewn Space requirement approx. 2000 x 1200 x 2500 mm The machine is supplied with a very comprehensive range of accessories.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Table length: 3000 mm Table width: 1500 mm Torch heads: 1 Control: FANUC AF3500i-C Total power requirement: 3.5 kW Machine weight: approx. 12.5 t Space requirement: approx. 12300 x 6000 x 2200 mm Model: Amada LCG3015 3.5 kW Laser resonator: AF3500i-C Pallet changer: LST 3015 G-Series Controlled axes: X, Y, Z axes (three axes controlled simultaneously) Axis travel (X/Y/Z): 3070 x 1550 x 100 mm (Z-axis) Max. material thickness: - 20 mm mild steel Bjdpfovwgu Dsx Ahnewn - 10 mm stainless steel - 8 mm aluminium (A5052) Max. processing dimensions: 3070 mm x 1550 mm Maximum simultaneous feed rate (X/Y): 170 m/min Positioning accuracy: +/- 0.01 mm Max. material mass: 920 kg Rated output: 3500 W Working table height: 840 mm Machine width: 2840 mm Machine height: 2166 mm Machine weight: 8,200 kg

Stanje: novo, Technical specifications: Drilling capacity in steel: 40 mm Tapping capacity: M 20 Spindle: MT 3 Reach: 260 mm Bsdpfxowhd Afj Ahnewn Speeds: (12) 55 - 2520 rpm Quill stroke: 130 mm Table size: 585 x 190 mm Travel X: 380 mm Travel Y: 190 mm Column diameter: 115 mm Motor power: 2.2 kW Weight, approx.: 300 kg Equipment: - Cross table - Thread draw spindle - Tapping device - Rotatable table - Height-adjustable safety cover - Spindle guard protected by limit switch

Stanje: novo, MIOTAL® GB 50 VG Column Drilling Machine with Tapping Device Technical Specifications: Drilling capacity: 50 mm Tool holder: MT 4 Quill stroke: 200 mm Tapping capacity: M33 Face mill: 100 mm Shank mill: 25 mm Throat depth: 340 mm Table size: 600 x 600 mm Column diameter: 180 mm Number of T-slots: 2 T-slot size: 22 x 35 mm Motor power: 3 kW Weight, approx.: 750 kg Features: Bwedpfx Ahopxmlionen - Coolant system - Automatic spindle feed - Tapping device - LED machine light - Height-adjustable safety cover - Swiveling table - Manual fine feed - Spindle guard with safety limit switch

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Ott robni lepilni stroj model EUROMATIC-FÜ - Letnik 2003 - BL-F avtomatsko vhodno vodilo, ogrevano - FÜ – lepilna enota - KM avtomatski magazin za robne trakove - RM-V avtomatski magazines za kolute - Lepljenje 0,4–15 mm - Predgretje robnega traku - K16 – dvojna enota, nastavljiva za 15°, žagine plošče 140x3,2x16 - HF 10.1 enota za poravnavo zgoraj in spodaj, vključno z orodjem Bjdpfx Ahjy S Rz Aenewn - HFF – enota za posnemanje zgoraj in spodaj, vključno z orodjem - HFR – zaoblitvena enota zgoraj in spodaj, vključno z orodjem - AR 4 – 4-motorna enota za kopiranje vogalov, vključno z orodjem - ZK – profilna strgala, vključno z orodjem - KE-G – stroj za končno čiščenje robov - ZKF – strgala za površine, vključno z orodjem Stroj je še vedno mogoče ogledati in preizkusiti pri stranki.

Stanje: rabljeno, IL 2 upravljanje za ILSA Multimatic Bwedpfx Ahey Uv Uajnjn

Stanje: rabljeno, Leto izdelave: 1997, Izvenos stojala: 920 mm Pomik: pribl. 15 m/min Debelina furnirja: pribl. 0,4 - 2 mm Potreben je priklop stisnjenega zraka Lokacija skladišča: Nattheim Bwsdpjy H Hgkefx Ahnjn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 920 mm, dolžina rezanja (maks.): 920 mm, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Opravljeno je bilo novo menjavanje olja za hidravliko in menjalnik. Nov barvni zaslon s programsko prilagoditvijo. Bwsdjzbiwyspfx Ahnsn Števec rezov pri približno 871.000. - ED programirano upravljanje - Svetlobna pregrada - Zračni miza - Preklopni zadnji pokrov mize - Navodila za uporabo (kopija) - Rezervni nož - Pribor za menjavo noža Stroj je takoj na voljo iz zaloge. Preizkus in ogled sta seveda mogoča po predhodnem dogovoru.

Stanje: rabljeno, Električni pogon Proženje cikla z nožnim stikalom V dobavo je vključenih več orodij: 1 x zgornji/spodnji nož s polmerom 4 mm 1 x zgornji/spodnji nož s polmerom 6 mm 1 x zgornji/spodnji nož s polmerom 7 mm 1 x zgornji/spodnji nož s polmerom 8 mm Bwsdpfeythzuox Ahnjn 1 x zgornji/spodnji nož s polmerom 9 mm 1 x zgornji/spodnji nož s polmerom 15 mm (trenutno nameščen)

Stanje: rabljeno, Izsekovalni stroj za npr. pokrove s številnimi izsekovalnimi orodji Bodpfoxw N Ntex Ahnown

Stanje: rabljeno, delovna širina: 500 mm, Električni stroj za lepljenje robov z integrirano enoto za utore. Vhodna širina cca 500 mm Vključeni so naslednji valji za nanašanje lepila (lepilni rezervoar je mogoče prilagoditi zahtevani širini valja): 1 x 13 mm širina 1 x 15 mm širina 1 x 17 mm širina 1 x 19 mm širina Bjdpfjytxw Hsx Ahnswn 1 x 21 mm širina 1 x 23 mm širina 1 x 25 mm širina 1 x 27 mm širina 1 x 33 mm širina

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Bwsdpfodd Hi Eox Ahnen Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Bodpfxev Tb Hge Ahnswn Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Bsdpfjr A Eq Rjx Ahnewn Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! Bedpfx Ajhy Tlrshnewn • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer's warranty. The 3.3 m long F 2 is not only economical and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure perfectly prepared workpieces for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Features: Edge banding machine F2 next With PLC control (including touchscreen) Bwjdel D Rp Eepfx Ahnjn Hot-melt glue application onto the workpiece for edge material up to 3 mm Jointing cutter (including diamond-tip tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change capability and glue drainage device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic cutter adjustment and replaceable insert cutter (combi version) Robust chain feed Double roller top pressure with ball bearings Inspection window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 Surface scraper (incl. pneumatic lift-off) F2/30 Pneumatic 3-point adjustment (radius, bevel, flush trimming) F2/27 Nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Bedpolc Ewiofx Ahnjwn Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg

Stanje: zelo dobro (rabljeno), Edge cutting device Bsdpowiwnqsfx Ahnown Working height: 800 mm Dimensions (L x W x H) approx.: 1,060 x 720 x 930 mm Compressed air connection: 6 bar Weight approx.: 120 kg Cutter included

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards Bwodod Supgjpfx Ahnen KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Roller Coating Machine BÜRKLE easy coater RCL 12M and UV Curing System easy cure UV - TRUV with 2 Lamps and 2 x Roller Conveyors BÜRKLE easy coater RCL 1300: For single-sided coating of flat surfaces from above Operator side: left Touch screen control TP 177 Micro Rubber-coated applicator roller Hard-chromed dosing roller, finely adjustable via worm gear Controlled belt transport with exposed counter roller for reliable workpiece transport Quick-change system with split bearing and disc coupling for easy replacement of the applicator roller Oscillating doctor blade, quick and easy to replace for cleaning Separate, infinitely variable FU direct drives for applicator and dosing rollers as well as for the transport system Reversible dosing roller Motors and limit switches in explosion-proof design on the machine Control cabinet and operator panel in non-explosion-proof design, located outside the hazardous area of the machine Mobile version Electric provision for integrating the roller coating machine into a coating line Technical Data: Working width: 1300 mm Workpiece height: 3 - 80 mm Min. workpiece length: 400 mm Rubber-coated applicator roller diameter: 240 mm Chromed dosing roller diameter: 172 mm Conveying speed: 2 - 15 m/min, variable Connected load: approx. 2.4 kW Dosing roller speed: 1.0 - 3.0 m/min Working height: 900 mm (+/- 20 mm) Safety devices compliant with CE standards Incl. control cabinet Weight: approx. 1650 kg UV System e.a.s.y. cure UV - TRUV with 2 Lamps: Single-sided curing of UV-curable coatings on flat workpieces from above Incl. control cabinet Bjdpfxot Dx U Se Ahnswn Max. working width: 1300 mm Max. workpiece height: 80 mm Number of lamps: 2 (replaced 10/2023) UV lamp power: 120 W/cm² each Speed: 2 - 15 m/min, variable Transport: conveyor belt Exhaust duct: 2 x 250 mm Connected load: 39 kW Weight: approx. 750 kg 2 x Roller Conveyor RB 1300: Working width: 1300 mm Length: 4000 mm Speed: 2 - 15 m/min, variable Connected load: 2 x 0.37 kW Total system length: 12,450 mm

Stanje: zelo dobro (rabljeno), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with separate motor approx. 0.2 kW Sanding belt dimensions: 3000 mm x 200 mm Front sanding table: 980 x 340 mm Rear sanding table: 750 x 300 mm Space requirement (L x W x H) approx.: 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table infinitely adjustable in angle Angle stop on the rear worktable Oscillation via geared motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic, adjustable belt tensioning Extraction with blower Possible attachment of feed device 2 side support tables for radius sanding Note on used machines: • Errors in technical details and prior sale excepted. Bjdpfx Ahsuxqzuonewn • Quoted prices are ex works—free loading at location! • Machine has been cleaned and function tested. • All machines are sold as inspected, without any claim to warranty. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)