Stroj za izsekovanje

KRAUSE-BIAGOSCH Y50-12EM-2-68

Stanje: generalkompletno obnovljen (rabljeno), Maximum pressing force: 180 kN (18 tons). Stroke rate: 100 to 600 strokes per minute. Maximum strip width: 60 mm. Maximum feed length: 60 mm. Iedpfx Afsfmavxj Teal Maximum strip thickness: 2 mm. Adjustable stroke: 4 - 36 mm. In very good condition. Programmable speed and number of strokes. Three operating modes: manual, single stroke, and automatic. Pneumatic clutch and brake. Machine comes with a 6-month warranty. Machine dimensions: 600 mm x 600 mm x 1850 mm. Machine weight: approx. 1.2 tons. Power consumption: 2.2 kW. Technical air supply: 8 bar. More high-speed presses in stock, including Bruderer models BSTA 18, 20, 30, 200, 50, as well as Schaal and Mabu presses.

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Iodpfxevvi I Re Af Toal Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: novo, Leto izdelave: 2025, Working width: 300 mm Working length: 1100 mm Brush diameter: 190 mm Brush speed: 1500 rpm Spindle diameter: 40 mm Number of brushes: 2 pcs. (metal + plastic) Maximum feed belt speed + stepless adjustment: 0–10 m/min Working height: 940 mm + 50 mm Maximum material height: 300 mm Suction port diameter: 2 x 120 mm Overall dimensions Length: 1240 mm Height min/max: 1350/1650 mm Width: 950 mm Weight: 435 kg Total power: 4.65 kW Voltage: 400 V Robust housing for high stability Working height of 940 mm + 50 mm and max. material height of 300 mm give you the freedom to process large workpieces Iaedpfjgykauex Af Tjl Two independent brushes (steel, plastic) with powerful motors and precise manual adjustment enable high product quality Two independent extraction units ensure effective removal of sawdust and debris The machine is built from high-quality materials, guaranteeing reliability and top-quality workpieces Stepless feed belt speed adjustment allows you to achieve smooth operation and the desired productivity Many years of manufacturing experience at Optimat enable us to meet even the highest demands – a machine tool for any budget.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Pressure: 105 t Bending length: 3,100 mm Distance between uprights: 2,600 mm Table width: 100 mm Table height: 750 mm Control system: DELEM DA 65 Installation height: 200 mm Working speed: 0 - 10 mm/sec Return speed: 0-100 mm/sec Rapid traverse upward max.: 100 mm/sec Electrical connection: 380 V / 50 Hz Total power requirement: 11 kW Machine weight approx.: 7.5 t Space requirement approx.: 4 x 2.2 x 2.8 m Iaodovq R Uuopfx Af Tel Equipment: - CNC control DELEM DA65 graphic video - Motorized backgauge with 2 axes - New lower tool - Two-hand operation / foot pedal

Stanje: rabljeno, številka stroja/vozila: 59062, Creasing & gluing machine for covers – Karl Tränklein CGM Serial number: 59062/5 Maximum working width: 500 mm Online video-inspection via Skype available. We would be pleased to welcome you for an on-site visit – more machines in stock. Immediately available – can be inspected. Iajdoh Axd Nepfx Af Tjl Located in our warehouse in Emskirchen / Nuremberg – test runs possible.

Stanje: rabljeno, Kündig Premium-2 1350 RP Kakovosten izdelek iz Švice STROJ S FIKSNIM OGRODNJIM MIZO / samodejno nastavljanje glave Širokopasovni avtomatski kalibracijsko-fini brusilni stroj 1. agregat: žlebljen gumijasti kontaktni valj 80 Sh Nivo kontaktnega valja brezstopenjsko nastavljiv glede na zrnavost 2. agregat: pnevmatski brusni blazinasti agregat Moč motorja pogona traku 15 kW Delovna širina 1350 mm Maksimalna višina obdelovanca 200 mm Hitrost podajanja brezstopenjsko nastavljiva 3-15 m/min Samodejno nastavljanje debeline obdelovanca ENORMATIC hitro nastavljanje s sprožitvijo podajanja (za dolge obdelovance) SPS upravljanje z zaslonom na dotik in Teach-in shranjevanjem za avtomatizacijo in upravljanje vseh delovnih programov Vtikalne in izstopne mize z valjčno podporo Dodatna izstopna miza, preklopna Stroj je SERVISIRAN S STRANI KÜNDIG TOVARNE Iedpfx Afjx A T Epj Teal Prva dostava 2018 iz izobraževalne delavnice / pokoj Malo delovnih ur Na voljo iz zaloge Lieboch / možnost leasinga

Leto izdelave: 2014, Stanje: pripravljen za uporabo (rabljen), Maximum throughput: 370 kg/h, connected load: 0.25 kW, length: 950 mm, width: 950 mm, height: 1115 mm, weight: 75 kg, including automatic filling, frame structure, level control valve, inspection hatch, and documentation. Iaedpfx Afeh Akm To Tsl

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, + Različica Varn Kompac sistem vlaženja Barvni noži z lasersko režo Isdpfsxy Nzbex Af Tsal

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, nastavitev hidravličnega cilindra: 40 mm, vgradna višina: 2.400 mm, skupna širina: 17.000 mm, dolžina mize: 400 mm, širina mize: 400 mm, stiskalna sila: 25 t, nastavitev hoda: 17 mm, delovna širina: 200 mm, skupna masa: 2.500 kg, leto zadnje generalne obnove: 2023, moč: 0,003 kW (0,00 KM), Manufacturer: MABU Model: 25 VPR. Ijdpoq Ikhpsfx Af Tjal Made in Germany. Completely overhauled in Dec. 2023. Max. force: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power output: 3 kW. Power supply: 230 / 400 V. Air connection: 5.5 bar. Feed unit: Silicon SFS 200, left side. Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with inspection window. Technical documentation and operating manual in English and German included. CE certificate and EUR-1 certificate of origin. In stock, tested and ready for shipment. Additional used machines from Mabu, Bruderer, Bihler, and Schaal available for sale from our inventory.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Pressure: 100 t Bending length: 2250 mm Distance between uprights: 2050 mm Stroke of press beam: 275 mm Vertical opening between upper and lower beam: 410 mm C-frame depth: 300 mm X-axis travel (CNC programmable): 550 mm Z1+Z2 axis travel (CNC programmable, manual adjustment, 4 backgauge fingers): mm R-axis travel (CNC programmable): 130 mm Approach speed: 100 mm/sec Bending speed: 0–10 mm/sec Opening speed: 100 mm/sec Operating hours: 13,000 h Length: 3500 mm Iasdpfsvzcm Dex Af Tjl Width: 2000 mm Height: 2600 mm Weight: 5700 kg Total power requirement: 9 kW Space requirement approx. 4x2x2.7 m All machines can be inspected under power at any time. Machine demonstrations possible at any time. Front safety light curtain, motorized adjustment (Fissler) Rear SICK safety light curtain Manual crowning Promecam tool holders