Zopf Stroj Za Upogibanje nakup rabljenega (86.762)

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) Gisdpfx Afjnh R Ekjwet OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. Gjdpfx Asnfvx Nefwoit With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. Gjdpfx Afendk N Aewsit POTENTIAL APPLICATIONS: • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: Godeng Amkspfx Afwoit • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: Gsdpfjng A R Sex Afwoit • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance

Stanje: novo, Leto izdelave: 2025, THE COST-EFFECTIVE MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for complex geometries with standard radii of 2xD for tube dimensions from 20 - 90 mm. Depending on the material quality and wall thickness ratio, radii of 1.5xD are also feasible for series production. With a tool height of 120 mm, there are also ample possibilities for special profiles. The highly precise and powerful electric drive of the bending axis, as well as the stable and robust construction of the mandrel carrier and bending arm, contribute to the desired bending results. Quick-change bending tools allow rapid conversion to different tube dimensions. The clamping pressure for tube securing is optimally adjustable. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited programs for bend angles, lengths, and rotation angles for up to 50 bend sequences per tube. For monitoring spring-back values, a freely programmable database is available for up to 200 materials. The control offers two operation modes: In "Simple Bending", tube segment lengths and rotation are automatically displayed in relation to each other. In "Controlled Bending" mode, data is entered beforehand and a continuous target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gearbox-assisted positioning for length and rotation. POTENTIAL APPLICATIONS: • Plant construction, e.g., chemical industry • Hydraulic piping • Metalworking • Prototype construction • Piping installation TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Bending radius min/max: 40 mm / 250 mm • Minimum bending radii: 1.5 x Ø (Standard: 2 x Ø) • Multifunction machine control for angle adjustment (0.1°) • Mandrel bar lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600-3200 kg (depending on version) • Ergonomic operation via safety foot pedal OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-change chuck • Larger bending radius up to 300 mm • Positioning of length and rotation via automatic brake function or manual stops using foot pedal • Semi-automatic length and rotation positioning using servomotors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to perform test production at our in-house demo room • Consultation and information meetings at your site • Leasing/financing advice and processing via JUTEC • Trade-in of your current machine Giodpfxenh R Suo Afwst • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance Gijdonfvy Uspfx Afwet

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation Giedpsng Ax Sofx Afwjt TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Swing Bending Machine Manufacturer: Schröder Model: SPB EVO 3200//4.0 DU used Godpfslnixisx Afwoit Year of manufacture: 2011 Usable length: 3240 mm Max. sheet thickness: 4.0 mm Bending beam lowering: 200 mm Upper beam stroke: 650 mm Bending axis adjustment: 80 mm Max. speed: 100/100 mm up/down Max. bending speed: 90 Max. bending speed DU: 150 mm Max. bending angle: 150° Min. inside bending radius: 1.5 x t mm Upper beam motor power: 2x4.24 kW Dimensions (LxW): 6332 mm x 2380 mm Weight: 12,260 kg.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Stroj za upogibanje betonskega železa P74 Evo Letnik 2023 (kot nov, uporabljen samo za testiranje) s programiranim digitalnim prikazovalnikom z modularno delovno mizo z valji, 2 metra z Uniq orodjem za stremena za 2 materiala 16 mm serijska št. 400V-50Hz, osnovni 3-fazni izmenični tok Motor 7,5 kW, CE izjavo oùna predizbira kota upogiba s pomočjo vstavnih zatičev 5 obr./min Giedpfx Afsy Awzkowjt Premer krožnika 720 mm Maksimalni premer puše 400 mm Nožno stikalo Dimenzije: 160x116x96 cm Teža: 1600 kg Zmogljivost upogibanja pri R=65 kg/mm2: okroglo 60 mm pri R=86 kg/mm2: okroglo 50 mm s pušami po fotografijah z enim kvadratnim zatičem HS-šifra: 8462 5900

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2011, obratovalne ure: 18.972 h, številka stroja/vozila: 363/11, vrsta aktuacije: hidravlični, število valjev: 4, premer spodnjega valja: 150 mm, delovna širina: 1.500 mm, najv. debelina pločevine: 5 mm, TEHNIČNE PODROBNOSTI Maks. debelina pločevine: 5 mm Maks. delovna širina: 1.500 mm Premer zgornjega valja: 130 mm Premer spodnjih valjev: 150 mm PODROBNOSTI O STROJU Krmiljenje: CNC Pogon: hidravlični Število valjev: 4 Število pogonskih valjev: 4 Dimenzije in teža Dimenzije (D x Š x V): 3.700 x 1.200 x 1.200 mm Transportna teža: 2.000 kg Transportni paketi: 2 Gedpfx Aoy Hhwqsfwoit Obratovalne ure: 18.972 h OPREMA Konusno upogibanje CE oznaka

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Širina lima 2550 mm Debljina lima 10,0 mm ST Savijanje 8,0 mm ST Prečnik gornjeg valjka ~ 205 mm Prečnik bočnih valjaka ~ 195 mm Upravljanje konv. Zapremina ulja 80,0 litara Napon 380 V Ukupna snaga 7,5 kW Težina 4500 kg Dimenzije D-Š-V 5000 x 1500 x 1300 mm Giedjy Ez A Ropfx Afwot Oprema: - robustna elektro-hidraulična mašina za kružno savijanje sa 3 valjka - koncept sa 3 valjka omogućava raznovrsne mogućnosti savijanja i kruženja - upravljačka jedinica na preklop, napred * upravljanje – kontrola svih valjaka, odnosno osa mašine * digitalni prikaz pozicije * ručno upravljanje preko JOY-stick-ova - mogući prečnici do 1,1 puta od prečnika gornjeg valjka - kovani i kaljeni valjci sa tvrdoćom 53-55 HRC - mašina sa malo održavanja i stabilnom konstrukcijom - čvrsta čelična varena konstrukcija - elektro-hidrauličko klap-ležište za lako vađenje cevi - manometar / prikaz pritiska za valjke - sigurnosni uređaj (sigurnosno uže sa sklopkom) - uputstvo za rad (PDF)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, STROJ ZA UPORABLJENJE ARMATUR B 50 / Demonstracijski stroj -CE-oznaka -Leto izdelave: 2025 -Nožni preklopnik -Popolnoma opremljen stroj z obsežno dodatno opremo -Tehnični podatki po podatkovnem listu Dimenzije D x Š x V: 1,4 x 1,3 x 1,5 metra / Teža: 450 kg Pridružujemo si pravico do napak ali napačnih vnosov Gjdpfx Afey Efukjwjit

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, Ponúkam na predaj úplne novú, nikdy nepoužitú ohýbačku značky DAVI. HLAVNÉ TECHNICKÉ ÚDAJE MCP 18 Gijdpfoy N Rbwsx Afwjt 1. Typ a kapacita - 3 hydraulicky poháňané valce, pyramídové usporiadanie - Hriadele s priemerom Ø 180 mm – to je význam označenia "18" pri MCP 18 - Ohýbanie: okrúhle, štvorcové, obdĺžnikové rúry, uhlové profily, pásoviny, UPN, IPE, HEA či všetky profily b235 2. Orientačné kapacity série MCP Výrobca Davi nezverejňuje presný technický list MCP 18 online, avšak v porovnateľnej sérii MCP: Profil Orientačná kapacita MCP 18 Okrúhla rúrka Ø 6" až 8" podľa hrúbky Plný štvorcový profil 80x80 mm až 100x100 mm Uhlový profil 120x120x12 mm UPN UPN 200 - 240 IPE s ležiacou prírubou IPE 200 - 240 Skutočné hodnoty závisia od hrúbky a kvality materiálu. Ø18 cm na hriadeľoch znamená stroj vyššej strednej kategórie. Pre všetky možnosti si pozrite fotografie v inzeráte.

Stanje: dober (rabljeno), Leto izdelave: 1993, številka stroja/vozila: 93212004, Ponudba 26084 Tehnični podatki: - maks. delovna širina: 2040 mm - maks. debelina materiala pri 40 kg/mm² trdnosti: 4 mm - nastavitev kota upogibanja elektronsko prednastavljiva: 0 – 135 ° - avtomatsko zaporedno krmiljenje za celoten delovni proces - največja odprtost / hod zgornje preme: 350 mm - možnost nastavitve višine: - upogibne preme: 100 mm - spodnje preme: 100 mm - pogon zgornje preme: 400 V / 4 kW Giodoy Em Dgepfx Afwst - pogon upogibne preme: 400 V / 4 kW - nastavitev upogibne preme - zadnji omejevalnik nastavljiv s kolesom na roko - električni nožni pedal - potrebna površina z zadnjim omejevalnikom: pribl. Š 3200 x V 1650 x G 2100 mm - teža pribl. 4500 kg

Stanje: rabljeno, Leto izdelave: 1986, Širina pločevine 2040 mm Debelina pločevine 4,0 mm Razmik med stojali 2100 mm Premer valjev 150 mm Skupna potrebna moč 7,0 kW Teža stroja cca 2,2 t Potrebni prostor cca 2,95 x 1,0 x 1,75 mm Gjdpoy Ezzyjfx Afwoit Stroj za ukrivljanje pločevine s 3 valji - 2 pogonska valja - zadnji valj električno nastavljiv - konično ukrivljanje - nožno stikalo - naprava za izklop v sili

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D06L/7457, Številka ponudbe: D06L/7457 Vrsta stroja: Stroj za upogibanje žice in traku Godpfx Afjwi S Rteweit Znamka: BIHLER Model: RM25 Leto izdelave: 1963 Premer področje: 0,5–2,5 mm Širina traku: 50 mm Dolžina izvleka: 170 mm Število upogibnih sani: 5 Prebijalna sila: 5 t Učinkovitost – kosov/min: 225 Lokacija: Pri nas na zalogi

Stanje: novo, Ta stroj za upogibanje žice in trakov, opremljen z osmimi motorji Yaskawa in numeričnim krmiljenjem na računalniku z operacijskim sistemom Windows, je idealen za izdelavo večjih kosov v 2D ali 3D tehniki. Prednosti te opreme vključujejo nizke stroške orodij, enostavno programiranje, nizke stroške vzdrževanja, zanesljivost in ponovljivost dimenzij izdelanih kosov. Gijdpfx Ajpiucxsfwst

Stanje: rabljeno, CNC press brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Hydraulic press brake with 6-axis backgauge and CYBELEC control system Gjdpfoya Iaqjx Afwjit Serial no.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Distance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis travel: 620 mm Backgauge R-axis travel: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Electrical connection: approx. 25 kW Mains supply: 400 Volts, 50 Hz, 50 Amps - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Ram equipped with servo valves and measuring system Y1 and Y2 - Safety light curtain FIESSLER AKAS - Operation via electric foot switch and/or two-hand control panel - Hydraulic tool clamping for upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for lower tool, height 160 mm x width 60 mm, with slot 14 x 23 mm - Tool system TRUMPF, without tools Required space L x W x H: 0 x 2500 x 3400 mm Transport height: 3360 mm Weight: 17000 kg In good condition

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 18402, Ponudba 26114 Tehnični podatki: - Postopek upogibanja se izvaja ročno, s pomočjo protiuteži - Vpenjanje zgornjega pritiskača z bočno ekscentrično ročico in nožnim pedalom - Maks. delovna širina: 2040 mm - Maks. debelina materiala St 40: 1,00 mm - Nastavitev kota upogiba prek končnega prislona: 10 - 180° Gjdpoy D Rxrefx Afwjit - Maks. hod zgornjega pritiskača: pribl. 70 mm - Maks. nastavljivost upogibne letev: 10 mm - Potrebni prostor: pribl. Š 2800 x V 1200 x G 900 mm - Teža: pribl. 520 kg - Različne upogibne letve kot prikazano na sliki

Stanje: novo, Leto izdelave: 2026, New machines directly from a reliable and experienced manufacturer. No risk! We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; professional advice and support during and after the warranty period. Guaranteed. Advice, delivery, or maintenance? Always happy to help. Looking for individual machines or entire packages? No problem. We know all our equipment inside and out. For years. And as the manufacturer, we are always up to date. We look forward to hearing from you. Giodpfsg In Azsx Afwjt Folding Machine RED-2200/0.8 incl. Transport Wheels Folding machine/box and pan brake with side cut-outs for top-to-bottom bending. Thanks to this, you can easily finish window sills. The machine frame offers a 6 cm high up and down clearance for bent workpieces. This is a modern sheet metal folding machine capable of bending sheet metal from three sides. Technical specifications: - Maximum working width: 2080 mm - Bending capacity: up to 0.8 mm (mild steel) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Clamping beam thickness: 15 mm - Top beam can be raised in three positions - Top beam lift: 80 mm Angle scale Angle stop Rear support for holding sheets Front depth stops - Weight: approx. 250 kg Roller shear (max. cutting capacity 0.8 mm/mild steel) available for an extra €350 - Manual seaming machine available for an extra €75 The machine complies with CE regulations and includes a 12-month warranty. Delivery costs: €180 Price: €2,200 Delivery date: weekly Cash on delivery We look forward to your inquiry! Invoices are issued at 0% VAT as intra-community delivery or with 19% VAT as applicable.

Stanje: rabljeno, Leto izdelave: 2011, Širina pločevine 1270 mm Največja debelina pločevine 4,5 mm Predupogib 4 mm Premer valjev 120 mm Hitrost valjanja 8 obr/min Minimalni premer upogibanja 180 mm Skupna moč 2,2 kW Gisdpeyv Nq Rsfx Afwst Teža stroja cca 1250 kg Dimenzije 2470 x 750 x 1000 mm

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Lease rate: €305.28 Shaft diameter: 50 - 60 mm Top roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square bar (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round bar (cross-section / min. diameter): Ø 35 mm / 350 mm; Ø 10 mm Tube (cross-section / min. diameter): Ø 60x2 mm / 600 mm; Ø 15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Square tube (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron legs out (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron legs in (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN legs out (cross-section / min. diameter): UPN 80 / 600 mm; UPN 30 / ... UPN legs in (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / ... IPN flat (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the two lower rollers Hardened universal rollers Gedpfeyn R E Sjx Afwsit Lateral straightening rollers, manually adjustable in 3 axes Usable in horizontal and vertical position Digital display for lower roller positions Machine and equipment compliant with CE regulations Operating manual in GERMAN and ENGLISH

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €63,900 Leasing rate: €1,207.71 Bending length: 4,200 mm Sheet thickness (420 N/mm²): 1.5 mm Max. sheet thickness – stainless steel: 1 mm Max. sheet thickness – aluminium: 2 mm Drive: Motorized Length: 5,450 mm Width: 2,200 mm Height: 1,900 mm Weight: 5,350 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming via input of the respective axis values - Open or closed hemming function - Multi-radius functions for folding or bending - Programming of material quality, sheet thickness, springback, bending corrections, and creation of a database for various material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, providing virtually unlimited storage capacity - Remote maintenance via WLAN Gsdpswirrqsfx Afwjit - Detailed alarm, tool, and parameter pages Motorized drive (servo motors) for upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo motor, 1,000 mm, rectangular configuration, with ball rolls in the sheet metal trays Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection Three-way foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for the bending beam Manual crowning system Second foot pedal Side gauge Rear light curtain protection 2D or 3D graphic control PC software Special omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Stanje: novo, Condition: New Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €53,600 Leasing rate: €1,013.04 Bending length: 2,050 mm Sheet thickness (420 N/mm²): 3 mm Max. sheet thickness - stainless steel: 2 mm Max. sheet thickness - aluminium: 4 mm Drive: Motorized Length: 3,350 mm Width: 2,200 mm Height: 1,900 mm Weight: 3,800 kg Backgauge: 1,000 mm CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on swivel arm - Tabular programming by input of respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material type, sheet thickness, springback, bending corrections, and creation of a database for different material types, sheet thicknesses, and sheet lengths - Piece counter - Authorization via password - 128GB HDD, virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool, and parameter pages Giedpewiq E Nsfx Afwst Motorized drive (servo motors) for the upper beam and bending beam (Z and Y axis) Motorized backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in sheet platforms Upper beam opening: 220 mm (without tools) Manual adjustment of bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail, 20° with R1 2 pcs. bending beam rails (7 or 10 mm, 15 or 25 mm) Front light curtain protection 3-position foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo drive for bending beam Manual crowning system Second foot pedal Side stop Rear light curtain protection 2D or 3D graphical control PC software Special Omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder