Stroj za obročno in profilno upogibanje

OSTAS OPK-32

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be floor-mounted or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross rails (lateral conveyor systems). - In automated systems, chain conveyors are most commonly used. These conveyors operate continuously and offer an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing different items simultaneously—such as operating multiple booths with different paint colors—flexible solutions using non-powered conveyors are applied. This is the most expensive option. Psdpfx Ajfz U S Ejgxjpr All installations are custom-built to customer specifications. Continuous conveyor systems for hanging chains are designed and manufactured according to individual customer orders. This system also enables the integration of floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Crossbeams (lateral transporters) are engineered and produced for the specific demands of each installation. Use of a photoelectric sensor The use of a photoelectric sensor in the component area allows length measurement and enables automatic activation of spray guns when a part enters their range, followed by immediate deactivation after painting. The photoelectric sensor is part of the standard equipment. Parts can also be identified by special markings. Above the conveyor loop, there are plates with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric sensor, detects the painted part and switches the guns on and off at the correct time, thus saving energy and powder paint. Vertical shape recognition. By utilizing light barriers with horizontal detectors, the PLC can analyze the vertical geometry of a component. The PLC measures the time during which the part should appear in the spray area, allowing selective activation and deactivation of the spray guns. Multi-sensor light barriers, both horizontally and vertically, enable precise measurement of component dimensions and the control of handling robots.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, For sale is a welding robot system with the following components: - Elite Robot CS620 (1750 mm reach) with programming flange and software - Fronius TPSi 500 - rotateZERO 500 positioner with 1800 mm x 800 mm sub-frame - Machine frame Pjdpfov Dvllex Agxjpr The unit is immediately ready to weld.

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically - Foot switch - Emergency stop Ppsdpfxegg N Twe Agxer - Documentation - 400V

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Cell with FANUC Arc Mate 100iD welding robot Year of manufacture: 2019 Ppsdpjt Rwwrsfx Agxer Axes: 6 Reach: 1441 mm Payload: 12 kg Fanuc System R-30iB Plus robot controller and housing measuring 2 m x 2 m x 2.7 m (without Kemper extraction system)

Stanje: rabljeno, Kompleti valjev za profilno upogibalko, 3-valjna obročna upogibalka HERKULES WETZLAR Valji so primerni za profilno upogibalko HERKULES WETZLAR tip BO 238 N Premer osi: 60 mm z 18 mm utornico 2 kosa valjev komplet št. 1, premer valja = 110 mm, širina valja = 180 mm Pedpfx Aoglaq Isgxjpr 2 kosa valjev komplet št. 2, premer valja = 160 mm, širina valja = 40 mm 3 kosi valjev komplet št. 3, premer valja = 150 mm, za premer cevi Ø 33 mm, širina valja 87 / 115 mm - Komplet št. 3 z adapter obročem iz Ø 93 na Ø 60 mm brez utornice Stroj je imel 2 gnana valja Teža vseh valjev 57 kg dobro stanje

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, premer gredi: 50 mm, premer valja: 155 mm, skupna masa: 400 kg, moč: 1,5 kW (2,04 KM), vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, nujno zaustavitev, Brand: Sahinler Ppjdpfx Ajwt Sy Aegxor Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (kg) approx.: 400 Units in stock: 4 Manufactured in: Turkey Maximum diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC - Outer cover in ABS - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Ppedpot Akxaefx Agxjr Operating key Operating manual

Stanje: rabljeno, Technical specifications: Psdpfsu Icn Eox Agxepr Sheet width: 1500 mm Sheet thickness: 2.25 mm Frame opening: 1600 mm Backgauge: no Shearing angle: not specified ° Blade gap adjustment: no mm Hold-down device: via pressure bar, units Height above floor: 850 mm Table size (LxW): 1800 x 350 mm Machine weight approx.: 0.85 t Machine dimensions: 2.0 x 0.8 x 1.3 m Simple mechanical guillotine shear with right/left tray 305 x 100 mm Operation via ON/OFF

Stanje: delavnici obnovljeno (rabljeno), Rational SCC201E, peč po generalnem remontu, osebni prevzem ali pošiljanje Ppsdpfoxayybjx Agxor

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 400 kW (543,85 KM), Obrat za oplemenjevanje rudnin za nikelj, baker, cink, grafit, zlato, srebro, kromit, kremen/solno kislino Ppsdpfxeq Nw Uqo Agxer V današnji konkurenčni rudarski in metalurški industriji je maksimiranje vrednosti rude ključnega pomena. Naš sodoben obrat za oplemenjevanje rudnin ponuja celovito rešitev, zasnovano za povečanje vsebnosti in kakovosti surove rude, ki jo pretvori v tržen izdelek, pripravljen za nadaljnjo predelavo ali neposredno prodajo. Zasnovan za širok spekter mineralov, vključno z nikljem, bakrom, cinkom, grafitom, zlatom, srebrom, kromom in kremenom/solno kislino, naš obrat zagotavlja vrhunsko zmogljivost, učinkovitost in zanesljivost. Uvod Rudarska podjetja po vsem svetu se soočajo z izzivom predelave rud, ki imajo pogosto nizke vsebnosti kovin in zahtevajo obsežno oplemenitenje, da so ekonomsko upravičene. Oplemenjevanje – proces povečanja koncentracije uporabnih mineralov – ima ključno vlogo pri zniževanju obratovalnih stroškov, povečanju izplena in posledično zagotovilu dobičkonosnosti. Naš obrat za oplemenjevanje rudnin, poznan tudi kot obrat za predelavo rude ali obrat za pripravo rude, integrira napredno tehnologijo in robustno inženirstvo, ki zagotavljata učinkovite procese drobljenja, mletja, razvrščanja in ločevanja. Naš obrat je zasnovan za obdelavo različnih vrst rud in predstavlja idealno rešitev za rudarska podjetja, ki želijo optimizirati svoje procese pridobivanja in predelave. Ne glede na to, ali predelujete nikelj, baker, cink, grafit, zlato, srebro, krom ali kremen/solno kislino, naš sistem ponuja potrebno prilagodljivost in zmogljivost za doseganje najzahtevnejših industrijskih standardov. ## Kaj je obrat za oplemenjevanje rudnin? Obrat za oplemenjevanje rudnin je industrijski obrat, kjer se surova ruda predela z namenom izboljšanja kakovosti in povečanja koncentracije uporabnih mineralov. Proces običajno vključuje več tehnoloških faz: 1. Drobljenje: Surova ruda se zmanjša na manjše delce za učinkovitejšo nadaljnjo predelavo. 2. Mletje: Nadaljnje zmanjšanje velikosti delcev za sprostitev uporabnih mineralov iz jalovine. 3. Razvrščanje: Ločevanje rude v različne frakcije glede na velikost z uporabo sito ali hidrociklonov. 4. Ločevanje: Uporaba različnih fizikalnih procesov, kot so magnetna separacija, flotacija ali gravitacijsko ločevanje za koncentriranje uporabnih mineralov. 5. Odtavanje (dewatering): Odstranitev odvečne vode za pripravo koncentrata na nadaljnjo predelavo ali transport. Ta integriran proces poveča vsebnost kovin in hkrati zmanjšuje količino odpadkov, kar pomeni večjo stroškovno učinkovitost in okoljsko trajnost.