Weiss Klimatska Komora Z Vlago 34 Litrov nakup rabljenega (51.373)

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 The type designation of the CTS chamber series is structured as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for lithium-ion battery testing Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in clear text Ethernet interface RS 232 interface Free switching channels for external specimen control Test Chamber Lighting: Energy-efficient, high-intensity LED light strip mounted on the door Rack: Stainless steel, load surface 970 x 980 mm Maximum load per rack: 35 kg Total load with maximum rack assembly: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Tests: Temperature range -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C Lsdpfxjvba Rao Al Ioab The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without thermal compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1 m front distance) Weight: approx. 1000 kg Heat dissipation to ambient: 10.4 kW Refrigeration Unit: Water-cooled, low-noise, fully hermetic overall stepless power adjustment via electronic monitoring and control system environmentally friendly refrigerants R404A/R23 For your safety as a buyer—the following will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by telephone.

Leto izdelave: 2020, stanje: zelo dobro (rabljeno), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Laedpfjw R Rt Iox Al Ijb Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: Designed for a maximum load of 250 kg Technical specifications for temperature tests: Temperature range: -55°C to +180°C Temporal temperature fluctuation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Technical specifications for climatic tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Climatic performance data (excerpt) Humidity range: 10 to 98% relative humidity (r.h.) Temporal humidity deviation: At center of test space, under stabilized conditions, depending on climate value: ±1 to ±3% r.h. Temporal temperature deviation: At center of test space, under stabilized conditions, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to set value (in range > 20% r.h.): ±0.5 to ±1 K Operating data: LED strip 24 V, 6.8 W / 2 x halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with Greenmode Weight: approx. 2050 kg For your safety as the buyer, please note the following information! The following steps are carried out in advance on all our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) If you have any further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 Ledpstz Rqmsfx Al Isab - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Heraeus Vötsch Temperature Test Chamber We offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Cooling rate: 5.0 K/min Heating rate: 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1595 mm x Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1 m distance (free-field measurement): < 69 dB (A) Side port: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerants: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your safety as a buyer, we provide the following information! The following steps are carried out on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated measuring equipment. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors reserved!) Lsdpfx Aeir D U Del Ijab For further questions, please do not hesitate to contact us by phone.

Stanje: zelo dobro (rabljeno), ENGLISH: Espec Type: TSA-202E-W Water-cooled thermal shock chamber Ledpfx Alswc R A Is Ioab Cold zone: -55°C to 0°C Hot zone: +50°C to 200°C System: Two-zone test via damper switching Temperature fluctuation: ±0.5°C Hot chamber: Heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold chamber: Cooling time: Ambient temperature (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz; 65 A Refrigerants: R404A 5 kg, R23 2.0 kg Weight: approx. 1200 kg For your safety as a buyer, please note the following information! The following points are carried out in advance of delivery on our offered chambers: 1. Functional check and replacement of necessary components. 2. If necessary, refill with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and error!) We will be happy to answer any further questions by phone.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Lasdpfx Asvitmdjl Ijb Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C Laodsu U Ixmspfx Al Ieb approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all data provided without guarantee!) Please feel free to contact us by phone for any further questions.

Stanje: zelo dobro (rabljeno), Atlas Type: SC 350 MHG Atlas Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with sun simulation by MHG lamp). This unit is suitable for performing standardized weathering and aging tests under combined exposure to radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water tank - Cooling via water or air system (optional) - Feedthroughs for measurement cables available - Operation via control panel or interfaces (RS232 etc.) - Solid test chamber floor, loadable up to 60 kg (optionally reinforced up to 150 kg) General Data: Model: SC 340 MHG Lasdpfxsxbd Ras Al Ieb Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Irradiated area: approx. 3,300 cm² Weathering: spectrum 300–3,000 nm, Standard-compliant testing according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Sound level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! We carry out the following checks on our offered chambers prior to sale: 1. Function test and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors reserved!) Further questions? We will be glad to answer them by phone.

Stanje: dober (rabljeno), Vötsch Type: VCS 7130-15 Vötsch Climate Test Chamber, Water-cooled Technical data for temperature tests: Temperature range: -70°C to +180°C Temporal temperature deviation at chamber center: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Technical data for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation at chamber center: ±1 to ±3% r.h. Heat compensation: max. 8,000 W Technical data - housing dimensions: External dimensions with hinges and door lock: Height: 1,995 mm, Width: 1,680 mm, Depth: 1,855 mm External dimensions without hinges and door lock: Height: 1,995 mm, Width: 1,300 mm, Depth: 1,855 mm Internal dimensions: Height: 950 mm, Width: 1,100 mm, Depth: 950 mm Test chamber volume: approx. 1,300 liters Feedthroughs: The chamber is equipped with feedthroughs on both the right and left sides. These allow measurement leads and test equipment to be routed into the test chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Test chamber lighting: Halogen bulb 24 V, 50 W 3/N/PE AC 400V ±10% 50 Hz Rated power: 44.0 kW Rated current: 63.0 A Fuse (site): 100 A slow-blow Max. heat emission to ambient: 2.2 kW Approved specimen weight: Total load on shelves: 100 kg Test chamber floor: 150 kg, Insert grid: 50 kg Refrigerant: R404A / R23 Weight: 1,900 kg Lasdpfx Alswvgwbo Iob Important safety information for you as the buyer: The following actions are carried out on all chambers we offer before sale: 1. Function check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See image) (Technical specifications subject to change; errors and omissions excepted!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: Ljdpfxjihb Amo Al Ieab

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch Temperature Test Chamber, Climate Chamber VLM 3068/S Air-cooled (top-loading test chambers for building materials) Control Panel The control panel is mounted on a console on top of the temperature test chamber. All control and operation commands can be triggered by simply touching the function symbols. The operating manual for the control panel is included. Main Switch The main switch is located at the front of the temperature test chamber. Air Treatment Chamber The air treatment chamber is located inside the test chamber and contains the assemblies necessary for temperature control. In the air treatment chamber, the air is conditioned (heated/cooled) and circulated by the test chamber fan. Air is drawn in through the center of the side wall and re-enters the test chamber via air duct panels located along the longitudinal sides. Feedthroughs The temperature test chamber can optionally be equipped with feedthroughs, allowing cables and test equipment to be introduced into the test chamber. Feedthroughs: front 2 x 82 mm Ø, rear 1 x 85 mm Ø Internal Dimensions: Width 2000 mm x Depth 570 mm x Height 600 mm External Dimensions: Width 3000 mm x Depth 870 mm x Height 1060 mm Technical Data: Mechanical loading data: Max. load for specimens/test material Test chamber floor (evenly distributed) 600 kg Point load 50 kg Temperature test data: Temperature range: -30°C to +125°C Temporal temperature deviation at center of working space: ±1 K Temperature change rate: Heating approx. 1 K/min Cooling approx. 2 K/min Lsdpfxerbiyfj Al Isab Operational data: Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 3 kW Rated current: 9 A Customer-side fuse: 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume: approx. 680 l Weight: approx. 700 kg Refrigerant: R-404A Noise level: Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of delivery: (See image) (Subject to technical modifications and errors; all information is without guarantee!) Further questions can be answered by phone.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Laedpjxdi Ezjfx Al Ijb 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Water-cooled Test chamber lighting: halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Ljdpfsq Dpzyjx Al Isab Temporal temperature deviation at chamber center: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8,000 W Heat compensation at -20°C: 3,000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Temporal temperature deviation at chamber center: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation at chamber center: ± 1 to ± 3% RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 24 A Rated power: 16.0 kW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 Important information for your security as buyer! The following points are completed on all chambers we offer, before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Laedpfxexr A R Tj Al Ieb Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK11-1000/40 For sale is a professional climate test chamber Weiss Umwelttechnik WT-WK 1000/40, equipped with a fully automatic cold-regenerating adsorption dryer. The installed components currently in the test compartment can be removed if required. At present, due to these installations, the switch cabinet is limited to an operating temperature range of −40°C to +60°C. After dismantling these components, the manufacturer can extend the temperature range back to the standard values of −40°C to +180°C, as the existing installations are not suitable for these high temperatures. The unit is suitable for precise temperature and humidity testing on components, assemblies, and devices. Ideal for applications in industry, development, quality assurance, and research. Ljdpfx Alsx Hxkzj Ijab Weiss climate test chamber, water-cooled Specifications for temperature testing: - Temperature range: -40°C to +60°C - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Specifications for climate testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% r.H. - Temporal temperature fluctuation at workspace center: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temporal humidity fluctuation at workspace center: ±1 to ±3% r.H. Heat compensation: - Within +25°C to +95°C - At relative humidity up to 90%: 500 W Humidification system specifications: - Reservoir volume: 20 liters - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 µS/cm³ - Water consumption: - At constant +40°C, 92% r.H.: 21/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber interior dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm Exterior dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V + 10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data remain reserved!) Feel free to contact us by phone for any further questions.

Stanje: dober (rabljeno), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 650 mm External dimensions: Height 2025 mm x Width 1000 mm x Depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to ± 0.8 Spatial temperature uniformity: ± 0.5 to ± 2 Cooling rate: 10 K/min Heating rate: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left: 1x side port ∅ 125 mm Left: 1x side port ∅ 50 mm Right: 1x side port ∅ 125 mm Chamber is water-cooled Test chamber lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Laedpfx Aoxzgn Ijl Ieb Rated current: 30 A Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your security as buyer, please note the following information: The following points are carried out in advance for the chambers we offer: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change or error!) For further questions feel free to contact us by phone.

Stanje: novo, Leto izdelave: 2025, Genie Z34/22N electric articulated boom lift, new, used, and demonstration machines available. Ljdpsvmxd Njfx Al Ijab

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: nepreverjeno, številka stroja/vozila: GTTS 220, skupna višina: 144 mm, skupna dolžina: 135 mm, skupna širina: 96 mm, Oprema: dokumentacija / priročnik, Rabljena klimatska komora Votsch/Weiss GTTS 220 Proizvajalec: Votsch/Weiss Model: GTTS 220 | 20 Zunanje dimenzije: 135 cm x 96 cm x 144 cm (dolžina x širina x višina) Maksimalne notranje dimenzije: 65 cm x 92 cm x 54/40 cm (širina x globina x višina) Napetost: 220/380 V Vrsta hladilnega sredstva: R12 S priloženim priročnikom (navodila za montažo in uporabo) Lodpfox H N Drsx Al Isab

Stanje: rabljeno, Rabljeno pokončno telo reaktorja iz nerjavnega jekla BCD Engineering Ltd. Približna nazivna prostornina je 4.000 litrov. Enota meri približno 1.800 mm v premeru in ima 1.700 mm ravnega boka. Opremljena je z zvarjenima izbočenima pokrovoma zgoraj in spodaj. Notranji projektni tlak je 10 barov / popolni vakuum, temperatura od -29 do 200°C. Zunanja spiralna jakna iz nerjavnega jekla ima približno 324 litrov prostornine, tlak 6 barov / popolni vakuum, delovna temperatura -29 do 200°C. Enota vključuje zgoraj nameščen siderno mešalo iz nerjavnega jekla, brez pogona/menjalnika. Nameščena na stranskih nosilcih. Laedjykn Ipopfx Al Isb

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Feutron climate chamber Model: 3703/13 Humidity: 70% Year of manufacture: 2012 See additional information in the attachments Door is damaged (paint damage) Laedpfx Asvwm Nuol Ijb

Leto izdelave: 2013, stanje: rabljeno, Prosimo za dodatne podrobnosti! Na voljo 2 enoti. Ljdpjx Nih Asfx Al Isab

Stanje: novo, WEISS 5.5AZK 71L-4T B14P105 motor, serijska številka: 303194, nerabljen, 100% funkcionalen, dobava v skladu s fotografijami Ljdpfsy Sdu Aox Al Isab

Stanje: novo, Naprodaj je nov trifazni električni motor priznane nemške znamke Motore Ehlert GmbH. Motor je povsem nov, skladiščen, nikoli uporabljen. Vizualno in tehnično brezhiben, pripravljen za montažo. Tehnični podatki: Proizvajalec: Motore Ehlert GmbH Tip: 1TZ9003 1AB53 4AB4 Z Moč: 3 kW Lajdpfxsyv R Nhe Al Ijb Hitrost vrtenja: 1460 obr/min Napetost: 400V 50Hz Tok: 6,2 A Razred učinkovitosti: IE3 Zaščitni razred: IP55 Izolacijski razred: F Velikost: 100L Izvedba: IM B3 Teža: cca 27 kg Uporaba: Motor je namenjen delu v industriji, idealen za črpalke, ventilatorje, proizvodne stroje ter druge industrijske aplikacije. Stanje: Nov

Stanje: novo, Naprodaj nov Siemens električni motor Motor ni bil uporabljen, skladiščno stanje Brez znakov uporabe, popolnoma delujoč in pripravljen za delo Tehnični podatki Proizvajalec: Siemens Ljdpfeyv Inusx Al Ioab Model: 1LE16032AA434AB4 Z Moč: 30 kW Št. obratov: približno 2955 obr/min Napetost: 400 / 690 V Frekvenca: 50 Hz Stopnja zaščite: IP55 Energetski razred: IE3 Mehanska velikost: 200L Tip montaže: B3 Robustna industrijska izvedba Idealen za industrijske stroje, črpalke, ventilatorje in pogone

Stanje: novo, Leto izdelave: 2024, nosilnost: 3.000 kg, 3,000 kg load capacity welding turntable, very robust Lasdpfx Ajtuqd Uel Isb Speed continuously adjustable from 0.05 to 0.7 rpm Turntable diameter: 1,400 mm Tilting up to 135° Height horizontal: 1,465 mm, tilted to center: 1,265 mm Dimensions: 2.12 m (length) x 1.4 m (width) Comes with hand-held remote control and dual foot pedal control