Stiskalnica Za Pohištveni Okvir Vrat nakup rabljenega (90.326)

Stanje: novo, Hydraulic Punching and Shearing Machine SAHINLER HKM 65 Ljdpfeggbuhex Aamsrp Applied force: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x Thickness 20 mm Throat depth: 305 mm Punch stroke: 55 mm Working height: 1,030 mm SHEARING: Flat bars: 300 x 20 mm 375 x 15 mm Blade length: 380 mm Round bars: Ø 45 mm Square bars: 45 mm Angle profiles at 90°: 120 x 120 x 12 mm Angle profiles at 45°: 70 x 70 x 10 mm NOTCHING: Max thickness: 10 mm Width: 45 mm Depth: 90 mm Working height: 900 mm

Stanje: novo, Leto izdelave: 2024, Electro-hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: - Submerged motor power unit 400 V 50-60 Hz. - Rapid approach and return pump preset at 20 bar. - Pressure pump adjustable via handwheel to achieve the required power. - Maximum pressure valve with mechanical lock to prevent overpressure. - Standard manometer for extremely precise adjustment of delivered power. The P110 MR is the only hydraulic press featuring two uprights in a monolithic FE 510 structure, laser cut with no welds at points of maximum stress. This feature endows it with exceptional robustness. It is deformation-resistant, ensuring tight working tolerances. The P110 MR is equipped with a 30-liter tank and achieves a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Ljdofh R N Depfx Aamsrp Max capacity: 110 t Rapid operation capacity: 34 l/min Slow operation capacity: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max absorbed current: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, sesalna zmogljivost: 20.000 m³/h, proizvodna zmogljivost: 1.300 enota/h, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Kladivni mlin (letnik 2021) ima le približno 2 delovni uri! Linija je primerna za slamo, seno, lucerno, kompost, les in druge kmetijske surovine! TEHNIČNI PODATKI Kapaciteta (odvisno od materiala) maks.: 1.300 kg/h PODATKI O STROJIH Lredpfezgf A Usx Aamjp Moč kladivnega mlina: 75 kW Peletirnica: 75 kW brez krmiljenja Razstavljalnik bal: 35 kW z vključenim krmiljenjem Kapaciteta filtrov za prah: 20.000 m³/h z vključenim krmiljenjem Delovne ure celotna linija: pribl. 1.500 h kladivni mlin: pribl. 2 h OPREMA Peletirnica Transportni trak Dvigalo Hladilnik za pelete z vibrirajočim sitom Zaloga posoda s praznenjem 2 ciklona z radialnim zapornim ventilom Ventilator za odsesavanje hladilnika Nova prstanasta matrica Razni rabljeni rezervni deli 10 m dovajalna miza za razstavljalnik bal Razstavljalnik bal z vključenim krmiljenjem Kladivni mlin z vključenim krmiljenjem Centrifugalni ločevalnik BigBag postaja za filter za prah Tehnologija odpraševanja: EU-ATEX Direktiva 2014/34 pozitivno poročilo o eksplozijski varnosti za prah iz leta 2023 Opomba: Linija je že demontirana in pripravljena za natovarjanje.

Stanje: rabljeno, Leto izdelave: 1999, številka stroja/vozila: H 40, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.200 mm, skupna širina: 1.100 mm, skupna višina: 1.800 mm, temperatura: 120 °C, Pritisna stiskalnica za furnir 2200 x 1100 mm z ogrevanjem, pritisk prek ročne črpalke. Lredpfx Aeyuva Ujamsp

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, vrsta upravljanja: NC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, model krmilnika: 4 axis digital readout, število valjev: 4, premer spodnjega valja: 350 mm, premer zgornjega valja: 370 mm, premer valja: 370 mm, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, delovna višina: 1.900 mm, najv. debelina pločevine: 40 mm, skupna masa: 15.000 kg, skupna dolžina: 5.300 mm, skupna širina: 2.100 mm, skupna višina: 2.400 mm, moč: 25 kW (33,99 KM), vhodna napetost: 380 V, število digitalnih zaslonov: 4, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, 4-valjna pločevinasta preša Faccin model hidravlični 4HEL2,5 30/25, letnik 1999 Valjčno gibanje po linearnih vodilih širina pločevine: 2500 mm Debelina pločevine: 30 mm Lrodpfx Aaozd Sw Tomjp Zmogljivost valjanja: 2500 x 30 mm Predgibanje: 2500 x 25 mm Premer zgornjega valja: 370 mm Premer spodnjega valja: 350 mm Uporabna dolžina valjev: 2550 mm Napetost: 380 V / 50 Hz, vgrajena moč: 25 kW Nameščena konfiguracija Površina vseh 4 valjev je kaljena Konusno upogibanje pločevine Hidravlično odpiranje spuščenega konca Digitalni prikaz položaja valjev NC programabilni 4-osni sistem Električni kontrolni panel

Stanje: rabljeno, Uporabljena vročepressa Italpresse UT/6 za obdelavo z nanašanjem furnirja na ploščice iz lesnih vlaknenih plošč, večplastne materiale, MDF, masivno leseno ploščo ali plastične laminate, tudi za aluminij in druge kovine. Plošče preše so masivne plošče iz perforiranega jekla. Mere plošč: 3000 x 1300 mm. Maksimalna odprtina: 400 mm. Ogrevanje plošč s toplotnonosnim oljem in električnim grelnikom, opremljenim s črpalko za kroženje. Grelnik z močjo 27 kW - 380 V. Stikalo za izbiro uporabe 50 % moči grelnika (13,5 kW) v prvem položaju ali 27 kW v drugem položaju. Nastavitev časa stiskanja z avtomatskim odpiranjem. Maksimalni pritisk: 300 bar. Možnost izklopa 2 stranskih cilindrov preko nadzorne plošče. Zaščitna folija Mylar na ploščah. Dimenzije stroja: 3700 x 1700 x V 2100 mm. Teža: 6600 kg. Stroj je v skladu z direktivo CE. Ljdszkt Tiepfx Aamerp

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 370, skupna širina: 2.500 mm, skupna višina: 4.000 mm, skupna dolžina: 7.000 mm, skupna masa: 14.000 kg, vrsta vhodnega toka: trifazni, potrebna širina: 2.500 mm, zahteva za prostor dolžina: 7.000 mm, potrebna višina: 4.000 mm, vhodna napetost: 380 V, kapaciteta rezervoarja za olje: 200 l, pritisk: 300 letvica, obratovalni tlak: 250 letvica, moč: 37,51 kW (51,00 KM), leto zadnje generalne obnove: 2023, raven hrupa: 80 dB, Oprema: hladilna enota, nujno zaustavitev, *Prodam mobilno opremo za proizvodnjo lesenih briketov. *Stroj Ruf RB440, zmogljivost: več kot 2 toni/uro. Ledswhw Syjpfx Aamsrp *Velikost briketov: D 150 x Š 80 x V 80–110 mm. *Stroj je popolnoma prenovljen in priložene so vse potrebne dokumentacije. *Tehnični pregled tovornjaka veljaven do januarja 2026, vozilo je pripravljeno za uporabo, tudi v okoljskih conah / zelena nalepka / oproščeno plačila cestnine!!! Registrirano kot delovno vozilo. *PE- vrečke za pakiranje, dovolj za približno 90 ton, so vključene. *Hidravlična črpalka Linde, nova. *Izpust menjalnika, nov. *Motor sesalne turbine 7,5 kW, nov. *Celotna menjava hidravličnega olja z oljnim filtrom 200 l, novo. *Na voljo je veliko rezervnih delov zaradi zaprtja obratovalne enote. *Tovornjak MAN 14.232 / 335937 km, leto izdelave 1990. *Na tovornjaku je nova, ojačana nadstavba, proizvajalec: Suhr. *Tehnični pregled, nov. *Vse pnevmatike (6 kosov) so nove. *Zavora prednje osi je nova. *Prodam vse skupaj, vključno z navodili za uporabo. *Če ste zainteresirani, me kontaktirajte po e-pošti.

Stanje: skoraj kot novo (rabljeno), dolžina police: 3000 mm širina police: 1300 mm razdalja med policami: 30 cm Ledpfxozlgm So Aamerp vodno ogrevanje 6 hidravličnih cilindrov varnostna sklopka

Stanje: novo, Stanje novo Dobavni rok pribl. 10 tednov od naročila Država izvora Turčija Cena 5.100 € Leasing obrok 98,43 € Dolžina upogibanja 1050 mm Maks. upogibna zmogljivost - konstrukcijsko jeklo 2 mm Lredpfoy Dvlkex Aamep Premer zgornjega valja 75 mm Moč motorja 1,5 kW Dolžina 1610 mm Širina 700 mm Višina 1160 mm Teža 385 kg 3 valji Asimetrična razporeditev valjev 2 pogonska valja z zavornim motorjem Nastavitev zadnjega valja z ročico z zaskočnikom Žlebovi za vstavljanje žice pri spodnjem in zadnjem valju Zgornji valj izklopljiv Desni/levi tek z dvojnim nožnim stikalom Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI IZBIRNO (CENA NA ZAHTEVO): kaljeni valji

Stanje: novo, Stanje: novo Dobavni rok: cca 10 tednov po naročilu Država izvora: Turčija Lrodpowiqnkofx Aamjp Cena: 7.000 € Leasing obrok: 135,1 € Dolžina upogibanja: 1.550 mm Najv. zmogljivost upogibanja – konstrukcijsko jeklo: 2 mm Premer zgornjega valja: 90 mm Hitrost valjanja: 6 m/min Moč motorja: 1,5 kW Dolžina: 2.130 mm Širina: 700 mm Višina: 1.200 mm Teža: 545 kg 3 valji Asimetrična postavitev valjev 2 gnan valja prek zavornega motorja Zadnja valja nastavljiva z ročnim kolescem Kanali za žico na spodnjem in zadnjem valju Zgornji valj izmetljiv Desno/levo vrtenje z dvojnim nožnim stikalom Naprava za konično valjanje Navodila za uporabo v NEMŠČINI ali ANGLEŠČINI MOŽNOSTI (CENE NA ZAHTEVO): kaljeni valji motorizirano nastavljanje zadnjega valja digitalni prikazovalnik

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: hidravlični, število valjev: 3, premer zgornjega valja: 350 mm, premer stranskega valja: 325 mm, premer valja: 350 mm, dolžina valja: 3.050 mm, delovna širina: 3.000 mm, delovna višina: 1.500 mm, najv. debelina pločevine: 25 mm, najv. debelina jeklene pločevine: 25 mm, maks. debelina pločevine iz nerjavečega jekla: 20 mm, skupna masa: 13.000 kg, skupna dolžina: 5.400 mm, skupna širina: 1.950 mm, skupna višina: 2.350 mm, moč: 25 kW (33,99 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, število digitalnih zaslonov: 2, Oprema: dokumentacija / priročnik, kaljeni valji, naprava za krivljenje stožcev, nujno zaustavitev, zavrtljivi zgornji valj, VALJČNI STROJ ZA UPLETANJE PLOČEVINE PINCH PIRAMIDA NA LINEARNIH VODILIH Zmogljivost upogibanja - Širina pločevine: 2500 mm - Debelina pločevine pri valjanju: 25 mm - Debelina pred-upogiba: 20 mm Lrjdpszdk Tysfx Aamop - Uporabna dolžina valjev: 2550 mm - Zgornji valj: Ø 350 mm - Stranska valja: Ø 325 mm Kaljena visokotrdnostna površina vseh treh valjev Vrtenje valjev poganja hidravlični motor z menjalnikom Stožčasto upogibanje z nastavitvijo hidravličnega naklona stranskih valjev Sistem za previjanje – zvarjene školjke zaobljenje Odpiranje – hidravlično nagibanje zgornjega valja s sprednjim padnim koncem Elektromotorji 25 KM na hidravlični enoti, 380 V/50 Hz Digitalni prikazovalniki pozicije upogibnih valjev Priložena navodila za uporabo Dimenzije 5400 x 1950 x V 2350 mm – teža 13 ton

Stanje: zelo dobro (rabljeno), Hess korpusna stiskalnica Tip: Export, pnevmatska Proizvajalec: Hess Tip: Export Velikost korpusa: maks. 2.500 x 1.500 mm Tlak stiskanja: 1.400 kp zmogljivost na stiskalno enoto pri 15 bar Število cilindrov, vertikalno: 2 + 2 tlačni cilindri Število cilindrov, horizontalno: 2 + 2 tlačni cilindri Mere: 3.900 mm x 2.500 mm x 600 mm Teža: 1.060 kg Hess korpusna stiskalnica Export, pnevmatska 2 vertikalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, 2 horizontalni stiskalni agregati, vsak z 2 tlačnima cilindroma, premer cilindra 80 mm, hod cilindra 110 mm, 1.400 kp tlačne zmogljivosti na agregat pri 15 bar, pri tem je zgornji zaradi protiuteži zelo lahko premikljiv, postopek stiskanja se upravlja preko 2 vrtljivih drsnih ventilov z nastavitvami Stiskanje - Stop - Sprostitev, servisna enota z redukcijskim ventilom 0 - 15 bar, manometer in oljna megla, anodizirane merilne letve, snemljive noge Lokacija: pri stranki Lredpfoxgvwpox Aamop - takoj na voljo -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold anodized platens Touch display control - Electric heating platens: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm Ledpfxodx R Tfo Aamsrp - Opening height: 350 mm - Loading possible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW - Electric heating platens made of solid hard aluminum with integrated heating wires - Heating capacity: 22 kW - High-pressure insulating panels - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Meets CE safety regulations Standard features: - Movement of the press table via rack-and-pinion and parallel guides on 2 corners of the press table made of self-lubricating material - Electronic control unit with touchscreen for machine control and monitoring - Digital timer for pressing time setting and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for pressing time selection - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety support for lower press table Integrated accessories: - Touch Screen TS/400 - EFC Electronic flatness control - Gold anodized heating platens (Busse) Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, Gannomat Concept 70 Eco Lamella case clamp with rapid traverse Technical Specifications: Lamella case clamp from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Top lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is infinitely adjustable electronically via 2 potentiometers and set via a frequency converter—thus, torque transmission is absolutely wear-free. - Pressing force for the horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Including options: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speeds 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45° carcasses. Ledpfxsy Egz Sj Aamerp Simple operation via 6 separate push-buttons, freely selectable pressing time preselection with automatic opening, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2026, AREA - CARCASE PRESS GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-resistant frame made of steel, welded and bolted construction - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, bottom) are 25 mm thick, coated, continuous support plates - Electromotive adjustment of the press beam via precision trapezoidal-thread spindles (with increased pitch and running accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) Ledpfsw Sgnkjx Aamsrp - Pressing force of the press beam can be continuously adjusted electronically via potentiometer and regulated via frequency inverter, therefore press force control is completely wear-free - Press force for vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speed of the press beams with fine positioning, via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawers, etc. - Very easy operation via two separate pushbuttons; two motion sequences (open/close) can be selected via the controller - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short-term

Stanje: novo, Leto izdelave: 2026, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Lodpfx Aslht H Eoamjrp Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Technical data: Laminated carcass press from our showroom; Working range: Width from 150 - 2,550 mm, Height from 150 - 1,400 mm; Depth from 150 - 700 mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 daN (kg) for the side pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 daN (kg) for the upper pressing beam. Easy operation via 6 separate pressure buttons, freely adjustable pressing time preselection with automatic opening function, loading height 300 mm. Lredpfx Aob Eln Doamjp The machine is available for immediate delivery from our showroom. Location: ex stock 54634 Bitburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as this unit was run at our in-house exhibition. Operating hours: 1 Immediately available – subject to prior sale. Once it's gone, it's gone! Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. A key feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Lrjdpfxjtnz Tte Aamep Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with wear-resistant, chrome-plated jaws - Pre-compactor with end-position dampened cylinder and bolted cover - Control panel with PLC control system Hydraulic system: - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and gear motor Screw conveyor channel with discharge screw and gear motor Accessories: - Briquette length monitoring - Automatic on/off Location: 54634 Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, new hydraulic hot press Manufacturer: ITALPRESSE Type XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates 3,000 x 1,300 mm - Total pressing force 90 t - Number of heating plates: 2 pcs. Ledpsxgbxfefx Aamjrp - Number of levels: 1 pc. - Cylinder stroke: 350 mm - Daylight opening: 350 mm - All-round loading capability - Number of hydraulic cylinders: 6 pcs. - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V / 50 Hz - Safety standards according to CE Standard equipment: - Movement of the press table by rack-and-pinion and parallel guideways at 2 corners, made of self-lubricating material - Electronic control unit with touch screen for machine operation and monitoring - Digital timer for adjusting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for setting pressing duration - Digital fault diagnostics and error display - Safety circuit with two-hand control - Emergency safety cable - Safety holder for lower press table Included accessories: - Touch Screen TS/400 - EFC Electronic Flatness Control - Gold-anodized heating plates (Busse) Location: ex works - immediately available -

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Lredpfoiidm Nex Aamsp Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput capacities of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foams, light metals, paper, or biomass. Numerous additional options can be implemented, such as an oil cooling system for multi-shift operation. All machines are available in both left- and right-hand designs. Installation on a stable base frame ensures quick setup and allows for mobile use. User-friendly operation thanks to Siemens PLC control To uphold our performance promise, we design and manufacture all control cabinets ourselves at our Ilsfeld location, equipping them with reputable international components. This guarantees the highest quality in a compact build. The Siemens PLC control system is perfectly tuned to the requirements of the briquetting process. Foreign-object-resistant conveyor screw via cardanic suspension The conveyor screw, which transports material into the briquetting press pre-compactor, is mounted on a cardan joint. This prevents foreign objects from damaging the conveyor screw. As always, the choice of mounting depends on the specific application. For metal processing, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (litres): 250 Weight (approx. kg): 1100 Lrjdpfx Aajil Hggjmjp Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2026, Your Advantages - Stable pressing mechanism with low-wear, chrome-plated pliers - Press chamber wear bushing - Pre-compactor with end-position damped cylinder and bolted cover Ledpscnz U Eefx Aamerp - Control cabinet with PLC control - Screw channel with discharge auger - Separate oil tank with pump motor and valve control - Safety switch for oil temperature - Mounted on a stable base frame with rubber feet - Briquette length monitoring Robust design, low-maintenance technology, minimal space requirement: The machines of the C-series are particularly suitable for small and medium-sized businesses with a required throughput rate not exceeding 50–80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, such as wood, styrofoam, foam materials, paper, or biomass. All machines are available in left- or right-handed configurations. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Throughput rate up to (kg/h): 50 (depending on material) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil volume (liters): 100 Weight (approx. kg): 800 Outstanding Features at a Glance - Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor designed for long operating periods - Briquette length monitoring: Controls briquette length for uniform sizing - Press chamber wear bushing: Prevents wear in the pressing area Location: Ex works – free loaded

Stanje: novo, Leto izdelave: 2026, Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foams, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press: - High-performance pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted lid - Control cabinet with PLC control Hydraulics: - Separate oil tank with pump motor and valve control - Oil temperature safety switch Tank with agitator and gear motor Screw channel with discharge screw and gear motor Lsdpobtnf Eofx Aamsrp Accessories: Briquette length monitoring Automatic On-Off Location: 54634 Bitburg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2026, obratovalne ure: 1 h, Super special price, as the machine was operated during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: These are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: the screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press Powerful press mechanism with low-wear, chrome-plated jaws Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Bin with agitator and gearbox motor Ledpfetnz Hbsx Aamsrp Screw channel with discharge screw and gearbox motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Montažna linija za ohišja, sestavljena iz: Pritisna naprava Ligmatech se lahko proda ločeno in je bila izdelana leta 2010, ostali del linije je bil izdelan leta 1996. Poz. 1 Montažna miza s trakom 2500*800 mm in regalom za drobne dele. Poz. 2 Transportni sistem z valji, približno 6000*800. Poz. 3 Postaja za nanašanje lepila na stranice ohišij z 1 lepilno pištolo. Poz. 4 Transportni sistem z valji, približno 4000x800 mm. Poz. 5 Postaja za odlaganje ohišij, približno 3000*800; višina od 850 mm do 300 mm. Poz. 6 Pritisna naprava Ligmatech MPH 510/25/09/S Profiline, izdelana leta 2010, z avtomatskim dovodom in odvodom ohišij (transportni trak), varnostna svetlobna pregrada na sprednji strani. Tehnični podatki stroja: Lrsdpfx Aozi N Rusamop za ohišja z dolžino: 250-2500 mm širino: 250-1000 mm višino: 150 -1400 mm pritisk: 14 KN hitrost pozicioniranja: 25 mm/s delovna višina: 300 mm potreben prostor: 4000 x 750 x 2300 mm teža: 2200 kg Poz. 7 Postaja za postavljanje ohišij, približno 3000*800 mm. Poz. 8 Transportni trak, 4000*800. Poz. 9 Postaja za izhod ohišij, 1200*800 mm. Poz. 10 Postaja za montažo ohišij, nastavljiva po višini s transportnim trakom, 4000*800.