Stiskalnica za furnir

Italpresse XL/6

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2025, stiskalna sila: 122 t, Additional Equipment • Mylar film attached to the upper and lower press plates • Electronic Flatness Control (EFC) to prevent incorrect loading Machine Advantages Technical Machine Advantages • Dimensions of heating plates: 3000 x 1300 mm • Number of heating plates: 2 units • Number of stages: 1 • Opening height: 370 mm • Maximum temperature of heating medium: 120°C • Working temperature: 70-90°C • Installed electric heating capacity: 18 kW • Operating voltage: 400 V - 50 Hz - 3 phases Additional Information Features: SIEMENS 4.3-inch TFT touchscreen Digital pressing timer Digital temperature controller Digital working pressure controller Day/week timer for heater start time Automatic hydraulic pressure calculation Error indication and PLC control Storage and retrieval of up to 200 operating programs Pre-pressing pressure and time settings Safety Equipment: Two-hand activation with safety circuit Safety pull cord around the machine Safety support for the lower press table Protective plate for frame/gearbox Safety instruction stickers Compliance with CE standard CE Declaration of Conformity Special machining of the heating plate surface made from solid steel Rsdpfx Abeyan Sgjhon Deactivation of the left cylinder row

Stanje: rabljeno, No. 04493 Combined Machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminum heating plates 2280 x 1000 mm (L x W) Lower plate extendable Opening width approx. 145 mm Total pressing force 40 tons, specific pressing force max. 2 kg/cm² Heating 2x 1.8 kW - Long-belt sander 3 kW Table 2600 x 750 mm (L x W), extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Rjdpfx Aexl Ha Sobhsn Left/right run, speed 19 m/s - Sliding table saw / Veneer saw / Edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, adjustable cutting height 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Dust extraction for sander and saw 0.55 kW Extraction capacity approx. 11 m³/min Push-button control with main and emergency stop switches Machine on undercarriage Footprint according to manufacturer: 7.5 m² Transport dimensions approx. 3900 x 2100 x 1400 mm (L x W x H) Weight approx. 2500 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended. Sale is made in "as is" condition. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded. The following applies: "bought as seen". Terms of payment: Prices plus statutory VAT, payment before collection or dispatch. Delivery conditions: ex stock.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold anodized platens Touch display control - Electric heating platens: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm - Opening height: 350 mm - Loading possible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW Rsdpfxodx R Tfo Abhen - Electric heating platens made of solid hard aluminum with integrated heating wires - Heating capacity: 22 kW - High-pressure insulating panels - Working temperature: 90°C - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Meets CE safety regulations Standard features: - Movement of the press table via rack-and-pinion and parallel guides on 2 corners of the press table made of self-lubricating material - Electronic control unit with touchscreen for machine control and monitoring - Digital timer for pressing time setting and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for pressing time selection - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety support for lower press table Integrated accessories: - Touch Screen TS/400 - EFC Electronic flatness control - Gold anodized heating platens (Busse) Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Kratek opis Dimenzija miz: 3000 mm x 1300 mm Število cilindrov: 6 Tlak: 90 ton Odpiranje miz: 400 mm Ogrevanje z vročo vodo Rodpfexvx Ezex Abhsn Kotlovnica: 20.000 kcal/h

Stanje: novo, Leto izdelave: 2023, OMC PL 105 LC 30/13 Water Heating Veneer Press Working area: 3000 x 1300 mm Opening width: 400 mm 6 cylinders with 85 mm diameter Total pressure: 105 t Maximum heating temperature: 85°C Logic control system Machine control and readings via touchscreen panel Redpfxsiypzlj Abhjn Parameter monitoring: temperature, pressing force, shelf opening time, loading area calculator, gluing process programming Power: 21 kW CE certificate Year of manufacture: 2023 Machine available on order Brand new machine

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 90 t, premer cilindra: 85 mm, hod: 350 mm, število valjev: 6, TECHNICKÉ PODROBNOSTI Rsdpfsxnyqpjx Abhsn Elektrické topné desky: 3 000 x 1 300 mm Počet topných desek: 2 ks Celkový tlak: 90 t Zdvih válce: 350 mm Počet pater: 1 ks Otevření patra: 350 mm Tlakové válce: 6 ks Průměr tlakových válců: 85 mm PODROBNOSTI O STROJI Pracovní teplota: 90 °C Max. teplota: 120 °C Elektrické údaje Provozní napětí: 400 V/50 Hz Příkon: 22 kW Topný výkon: 22 kW Příkon hydraulické jednotky: 3 kW VYBAVENÍ Pohyb lisovacího stolu pomocí hřebene a paralelního vedení Elektronická řídicí jednotka s dotykovým displejem Digitální časový spínač pro nastavení doby lisování Digitální zadávání a sledování lisovacího tlaku Digitální diagnostika a zobrazení chybových hlášení Bezpečnostní obvod s obsluhou oběma rukama Bezpečnostní nouzové táhlo Bezpečnostní držák spodního lisovacího stolu EFC Elektronická kontrola rovinnosti Topné desky opatřeny zlatým eloxováním (Busse) Poznámka: Demontáž a nakládka může být nabízena za cca 1 200 € bez DPH.

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Info: 9 m Kammerlänge x ca. 3 m Durchmesser, Bedienfeld mit Touchscreen, Nennstrom 1100 A, Steuerspannung 24 V, 230 V/50 Hz, Betriebsspannung 400 V, 2 x Honeywell digitale Temperaturregler, Honeywell digitaler Druckregler, Honeywell Rjdpfx Aowintksbhen

Leto izdelave: 2018, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Vacuum Membrane Press Wemhöner Type VARIOPRESS Model Basic 1000 S Rsdpjv Np H Hsfx Abhon Technical Specifications: Heating Plate Size (mm): 2850 x 1550 Electric Heating Plate Design: Aluminium heating plate on top Total Pressing Force (kN): 2400 Max. Chamber Pressure (bar): 6 Max. Operating Temperature: 180 degrees Celsius Max. Batch or Workpiece Size (mm): approx. 2460 x 1180 Thermoplastic Film in Roll Form: Film width: approx. 1430 mm Film thickness (mm): approx. 0.25 - 1 Press Chamber Height (mm): up to max. 180 Connection Data: Installed Power (kW): approx. 46 Required Air Pressure (bar): approx. 8

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, širina reza pri vzporednem vodilu: 1.300 mm, največja višina reza: 204 mm, glavni premer žaginega lista: 550 mm, vrsta nastavitve višine: električni, višina mize: 910 mm, dolžina pomika: 3.200 mm, moč: 5,5 kW (7,48 KM), Oprema: motorna zavora, vrtilna hitrost brezstopenjsko nastavljiva, Altendorf F45 EvoDrive Year of manufacture: 2023, new machine Rjdpfsvw S Hfsx Abhjn - Template holder at the terminal - Extended cutting height, saw blade up to 550 mm, cutting height 204 mm - 5.5 kW (7.5 HP) VARIO motor (stepless speed control) - Preparation for 2-axis scoring unit - Table extension 840 mm - Double roller carriage length 3200 mm - Mitre angle fence - CNC rip fence 1300 mm - Front support roller

Leto izdelave: 2005, Stanje: dober (rabljeno), številka stroja/vozila: C9 15840, Stroj za profilno krtačenje Tagliabue LB 2 Model: LB 2 TEHNIČNI PODATKI: Leto izdelave: 2005 Rjdsg Rn Iaopfx Abhon Tagliabue robni brusilnik s 4 nihajnimi brusilnimi enotami. Dva navpična valja in dva notranja prečna valja za prečno krtačenje.