Scm Group Spa - Stefani Dvostransko Formatiranje In Robno Lepljenje nakup rabljenega (123.268)

Stanje: rabljeno, Leto izdelave: 2020, Stroj za lepljenje dveh pol za izdelavo velikih škatel Cjdpfx Acex Rc Sdotjha

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MzBs001, Oprema: CE označba, Stroj za tesnjenje s peno, avtomatski stroj za zgornje in spodnje pokrovce, upravlja ga PLC krmiljenje. Trak se s pomočjo nastavljivega ročaja namesti v pozicijo za tesnjenje, na zaslonu na dotik izberete ustrezen model in pritisnete gumb za zagon, kar samodejno prične s tesnjenjem traku. Tesnjenje je ravno in estetsko, spoj pa čvrst. Napravo lahko uporabljate samostojno ali jo vključite v avtomatsko pakirno linijo. Široka uporaba v živilski, prehrambni, hladilni, e-trgovini in drugih industrijah. Cedpfxjxu Agms Actsha

Stanje: novo, Leto izdelave: 2023, RAZPRODAJA ZALOGE!!! Linvincibile SiX je najvišja serija formatnih žag. Glavna prednost je nagib žage v obe smeri (+/- 46°), podporna roka na močnih THK vodilih ter serijsko priložen ''FULL SUPPORT'' voziček z brezžično povezavo na novi 15'' displej EYE-S. O seriji formatnih žag L'invincibile ni kaj dosti za dodati. So vrhunske formatne žage, narejene po uporabnikovih najvišjih zahtevah! Csdpsvzqdkofx Acteha TEHNIČNE LASTNOSTI: - 550 mm žagin list - nagib v OBE smeri (+46° / -46°) - Inverter za vrtljaje motorja - Dolžina voza 3200 - Hitrost vrtenja predrezila 6000 - Širina odreza na desno vodilo 1500 - Predrezilo - moč motorja 0,9 - Predrezilo (mm) 160 - Moč motorja (kW) 9 - Hitrost vrtenja žage (obr/min) 2800 - 4200 - Maks. odrez pri 90°/45° 205 / 130 - Odsesovalni nastavki (mm) 1 x 120 / 1 x 100 !!! Cena ne vsebuje DDV !!! ne zagotavljamo servisa in montaže

Stanje: rabljeno, Leto izdelave: 2001, Spodaj / desno / levo / zgoraj z glodalnimi glavami Centro Fix. Minimalna/maksimalna širina obdelave (končna mera): 23–180 mm. Minimalna/maksimalna višina obdelave (končna mera): 6–105 mm. Minimalna dolžina obdelovanca: 300 mm. Hitrost podajanja: 6 / 12 vrt/min. Hitrost vretena: 6000 vrt/min. Premer vretena: 35 mm. Moč motorja za horizontalna vretena: 7,5 kW. Moč motorja za vertikalna vretena: 5,5 kW. Moč motorja za podajanje: 1 kW. Premer podajnih valjev: 120 mm. Premer priključka za odsesavanje 1 kos: 150 mm. Premer priključka za odsesavanje 2 kosa: 120 mm. Teža: približno 950 kg. Cedpfx Acjym D Eisteha Lokacija skladišča: Nattheim.

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Chjdpfxod Akyzj Actea Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: kot nova (razstavni stroj), pneumatic single-head boring machine with 21 spindles MAGGI Model: Boring System 21 STANDARD EQUIPMENT: - Aluminium fence with 2 stops (each 1,500 mm, right and left) - No. 5 quick-change chucks - No. 2 patented safety pneumatic hold-down cylinders - Connector for suction/extraction unit compliant with EU standards Csdpfx Aod Supgjcteha KEY FEATURES: - Worktable made of cast iron - Boring head made of aluminium - Patented spiral system for fine adjustment of drilling depth - Pneumatic lowering of the boring head, lockable in any position between 0° - 90° - Extendable cast iron side stops with millimetre adjustment, readable on a scale with magnifier - Drill height adjustment via digital counter with decimal display - Fixed stops, 37 mm, for cup hinges - Machine constructed according to CE standards TECHNICAL DATA: - Boring spindles (left red/right black): 21 pcs. (10/11) - Distance between boring spindles: 32 mm - Working width: 640 mm - Max. drilling depth: 65 mm - Number of pneumatic hold-down cylinders: 2 pcs. - Max. workpiece size: 900 x 3000 x 60 mm - Max. workpiece height: 65 mm - Number of motors: 1 pc. - Motor power: 1.5 kW, 400 V, 50 Hz - Motor speed: 2800 rpm - Working pressure: 6-8 bar - Standard air consumption per cycle: 10 l/cycle - Extraction port diameter: 80 mm - Worktable height: 860 mm Overall dimensions (approx.) L x W x H: 1030 x 1030 x 1285 mm Weight (approx.): 260 kg

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Cjdpfx Acjd Etkhetoha Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Chjdpfocrnm Njx Actja Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: dober (rabljeno), Šifra: 0458 Znamka: ARTECH BIESSE GROUP Model: SINGLE 89-N – v skladu s standardom CE Stroj za obrobno obdelavo ravnih in oblikovanih plošč, za obdelavo robov iz lesa, furnirja, PVC-ja, plastičnih laminatov itd. – v skladu s standardom CE Tehnični podatki: Višina delovne površine do 120 mm Debelina obrobe 0,4 – 3 mm Cedoznu Dwspfx Acteha Minimalni polmer upogiba 20 mm Minimalna dolžina plošče 300 mm Kapaciteta rezervoarja za lepilo 3 litre Motorizirano podajanje z nastavljivo hitrostjo Sprednja podaljšek za podpiranje velikih plošč Nagib delovne površine od 0 do 45 stopinj Hitrost podajanja 4/16 m/min z nastavljivo hitrostjo Enota za obrezovanje, sestavljena iz 2 motorjev, nameščenih enega nad drugim Skupna porabljena moč 5,2 kW Delovni tlak 6 bar Celotne dimenzije 1300 x 900 x 1380 mm (v x š x v) Teža 350 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilnik SCM Sandya Win Delovna širina 630 mm Višina brušenja 3 – 140 mm 1 kombinirana enota Električna nastavitev višine Pnevmatska oscilacija Dve vrsti podajalne hitrosti Chodpfxszmg Swj Actsa

Stanje: rabljeno, številka stroja/vozila: 007802, Maks. širina panela: 800 mm Maks. dolžina panela: 2000 mm Chjdpfx Asxn Nf Njctja Dolžina transporterja: 8320 mm Povratek kosov za robno lepilko: levo

Stanje: rabljeno, Leto izdelave: 2005, Delovna širina: 180 mm Delovna višina: 110 mm Število delovnih vreten: 4 Razporeditev vreten: spodaj, desno, levo, zgoraj Chjdpfx Acjyq R Aistea Moč motorja spodnjega in zgornjega vretena: 7,5 kW Moč motorja desnega in levega vretena: 7,5 kW Nastavitev spodnjega vretena: - Nastavitev desnega vretena: - Nastavitev levega vretena: ročni volan Nastavitev zgornjega vretena: ročni volan Skobelni glavi spodaj in zgoraj: Centrolock Skobelni glavi levo in desno: Centrolock v kombinaciji s profilirno možnostjo Hitrost podajanja: 2 Pritisk podajalnih valjev: vzmet Poraba toka: 32,8 A Priključek za odsesavanje: Dolžina stroja: Širina stroja: Teža:

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, moč: 7 kW (9,52 KM), vhodna napetost: 400 V, največja višina reza: 136 mm, največja širina rezanja: 900 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, skupna masa: 690 kg, Oprema: dozator, zaščitni pokrov žaginega lista, Razstavni stroj; art. št. 5504933 s posebno opremo; okvir za obrezovanje s CompeX napravo, digitalni prikaz širinskega prislona. Holzkraft minimax si 4 - 400 / 32 M A, proizvajalec SCM Group, Dolžina reza 3200 mm, višina reza 136 mm, žagin list 400 mm, motor 7,0 kW, predrezovalec z lastnim motorjem, motorizirano nastavljanje višine in nagiba žaginega agregata Hitrost žaginega lista nastavljiva v dveh stopnjah, vklopni/izklopni gumb integriran v pomični voziček, praktična nihajna zaščita za žagin list, Cjdpfeziwz Uex Acteha

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Ferwood koda: AGG0014 - Stanje: Rabljeno - Funkcionalnost: Ni preizkušena - Kompatibilen stroj: CNC SCM - V primeru zanimanja nudimo storitev pregleda, kontaktirajte nas. Teža in dimenzije za transport: 3,5 kg, 36x26x21 cm Chjdpfovu Ahnox Actea

Stanje: dober (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Naprodaj je robusten in preizkušen stroj za ravnanje in gladanje lesa Holzkraft / SCM Minimax FS 30 Genius. Stroj je idealen za mizarje, delavnice za obdelavo lesa, izobraževalne ustanove ter ambiciozne lesarje. Zahvaljujoč masivni liti železni mizi in preizkušeni tehnologiji SCM stroj deluje natančno in zanesljivo. Stroj je v dobrem, rabljenem stanju in si ga lahko po predhodnem dogovoru ogledate in preizkusite. Tehnični podatki Proizvajalec: Holzkraft / SCM minimax Tip: FS 30 Genius Leto izdelave: 2009 Napetost: 400 V / 3 faze Moč motorja: pribl. 3,0 kW Širina ravnjalne glave: 300 mm Širina glodalne glave: 300 mm Kombiniran stroj za ravnanje in gladanje Lita železna miza Aluminijast vodnik za ravnanje Na voljo je priključek za sesalnik Brez podvozja Teža: pribl. 445 kg Oprema Ravnjalna glava Glodalna glava Aluminijast vodnik Zložljiva miza za ravnjanje Pokrov za sesalnik Upravljanje preko glavnega stikala z gumbom za izklop v sili Obseg dobave Holzkraft / SCM Minimax FS 30 Genius Dodatna oprema v skladu s fotografijami Cedpozlqh Hefx Actjha Stroj si lahko ogledate in preizkusite pod napetostjo. Možen je transport za doplačilo! Stroj bo pred prodajo pregledan. Pri rabljenih strojih, izdelanih leta 2009 ali prej, velja ob prodaji poslovnim strankam izključitev garancije. Tehnični podatki in oprema se lahko razlikujejo. Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Vse informacije so podane brez garancije.

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, – zelo dobro stanje – italijanska proizvodnja – leto proizvodnje: 2000 TEHNIČNI PODATKI: OBLIČNI STROJ: – delovna širina: 410 mm – število nožev: 3 kosi – dimenzija dovajalne mize: 1030 x 410 mm – dimenzija izhodne mize: 930 x 410 mm – kotno nastavljivo vodilo – dušilni glavnik DEBELINKA: – višina skobljanja: 3-230 mm Cjdpfx Acoxl D Nqjtsha – premer valja: 72 mm – obrati valja: 5300 obr/min – dimenzije mize: 700 x 410 mm – hitrost podajanja: 7 m/min – glavni motor: 4 kW – dimenzije stroja (d/š/v): 200 / 90 / 120 cm – teža: 400 kg

Stanje: novo, Leto izdelave: 2026, Razdelna vretena 1 0 Število rezkalnih enot 3 kos. Premer vretena HSK, 50 mm Krmilnik Maestro active windoor SCM Windor NT 1 OBDELAVALNI CENTER ZA KOTNE DELOVNE POSTOPKE PRI PROIZVODNJI OKEN IN VRAT ----- Proizvajalec – kratka predstavitev: Windor NT1 je obdelovalni center za kotne delovne postopke pri proizvodnji oken in vrat. Zaradi kompaktnih dimenzij je sposoben izvajati vse delovne korake, kot so: rezanje, izdelava utorov, vrtanje, rezkanje in oblikovanje. Ne glede na oblikovalski koncept, vrsto spoja, prečni prerez itd. ----- Tehnična predstavitev proizvajalca: Položaj "1": Enota za krojenje Lastnosti: - Moč motorja: 4 kW (5,5 KM) - Število vrtljajev: 3000 vrt/min - Max. premer orodja: 400 mm - Premer luknje žage: 80 mm / Premer prirobnice: 100 mm - Pnevmatska vertikalna nastavitev VKLOP/IZKLOP - 1 priključek za sesanje, premer: 160 mm Položaj "2": Enota za utore in utorne spoje Lastnosti: - Visokozmogljivo vreteno, premer: 50x320 mm - Moč motorja: 7,5 kW (10 KM) - Število vrtljajev: 3500 vrt/min - Max. premer orodja: 320 mm - Max. globina utora: 105 mm - Osni hod pod delovno mizo: +15/-300 mm - Avtomatska zaščita pred nastankom robov Jolly - Največji kot utora: ± 60° - Vertikalna nastavitev prek brezkrtačnih motorjev M.C. - Vrtenje v levo - 1 priključek za sesanje, premer: 200 mm Položaj "3": Enota za profilno rezkanje Lastnosti: - Visokozmogljivo vreteno, premer: 50x320 mm - Moč motorja: 7,5 kW (10 KM) - Število vrtljajev: 6000 vrt/min - Min.-max. premer orodja: 130-240 mm - Osni hod pod delovno mizo: +15/-300 mm Codpfx Acey T R S Rotsha - Vertikalna nastavitev prek brezkrtačnih motorjev M.C. - Pnevmatska horizontalna nastavitev VKLOP/IZKLOP s 5-pozicijskim revolverjem (standardno, če ni predvidena možnost 99.06.62) - Vrtenje v desno / levo - Simultana funkcija potopitve za zaščito pred nastankom robov pri obračanju Položaj "4": Enota za profilno rezkanje Lastnosti: - Visokozmogljivo vreteno, premer: 50x320 mm - Moč motorja: 7,5 kW (10 KM) - Število vrtljajev: 6000 vrt/min - Min.-max. premer orodja: 130-240 mm - Osni hod pod delovno mizo: +15/-300 mm - Vertikalna nastavitev prek brezkrtačnih motorjev M.C. - Pnevmatska horizontalna nastavitev VKLOP/IZKLOP s 5-pozicijskim revolverjem (standardno, če ni predvidena možnost 99.06.62) Položaj "5": Enota "DUO" Enota za izdelavo utorov - komplet z: - Premer vretena: 50 mm - Dolžina vretena: 3 mm - Število vrtljajev: 9000 vrt/min - Premer orodja: 154 mm Enota za ločevanje steklenih letvic in/ali rezkanje okov z: - Premer vretena: 30 mm - Dolžina vretena: 35 mm - Število vrtljajev: 6000 vrt/min - Max. premer orodja: – Žaga za ločevanje steklenih letvic: 200 mm – Orodje za rezkanje okov: 240 mm Skupne lastnosti: - Pnevmatsko vrtenje za kot z 2 položajema: 0°-90° - Pnevmatska nastavitev v/izklopljeno VKLOP/IZKLOP s 5-pozicijskim revolverjem - Ročna osna nastavitev - 1 priključek za sesanje, premer: 160 mm ----- Maestro active windoor Upravljanje stroja je organizirano na dveh ravneh. Prva raven obsega industrijsko numerično krmiljenje podjetja BECKHOFF, ki izvaja vse funkcije nadzora SPSS. Druga raven je industrijski računalnik, konzola „eye-M evo“, ki služi kot vmesnik med uporabnikom in strojem. -----

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Kombinirana reškalna in žagalna strojnica SCM minimax fs 41e Letnik proizvodnje 2019 Moč pogonskega motorja 5 kW Priključna napetost 400 V Frekvenca omrežja 50 Hz Valj reškalnih nožev, tip TERSA – 4 reškalni noži Število vrtljajev 5200 min⁻¹ Širina reškaljenja največ 410 mm Hitrost podajanja 6 / 12 m/min Priključek za odsesavanje, premer 120 mm Reškaljenje Podajalna miza, dolžina 1034 mm Odstranitev materiala, največ 5 mm Dimenzije in teža, dolžina približno 2000 mm Širina/globina približno 1110 mm Višina približno 1115 mm Teža približno 430 kg Sistem reškalnih nožev TERSA omogoča izjemno tih delovanje. Poševno nazobčen jekleni valj za enakomeren in stalen vnos materiala Podajanje materiala z dvema hitrostmi Digitalni prikazovalnik za višino žagalne mize Žagalne mize dolžine 2000 mm omogočajo enostavno obdelavo velikih obdelovancev. Cjdpfx Aozi Nhmsctjha Delovne mize so izdelane iz sivega litega železa, žarjene in brez napetosti, zato so odporne in trajno ravne. Stabilna, velika aluminijasta vodilna plošča z okroglimi vodili (1200 x 160 mm) Nastavitev žagalne mize prek ročnega kolesa z digitalnim prikazovalnikom za višino žaganja Visoka teža stroja zagotavlja največjo natančnost in stabilno delovanje Močan industrijski motor Robustna jeklena/litina konstrukcija

Stanje: novo, Leto izdelave: 2025, Dimensions and Weights Length approx.: 2000 mm Width/Depth approx.: 1110 mm Weight approx.: 430 kg Jointer Infeed Table Length: 1034 mm Maximum Cutting Depth: 5 mm Dust Extraction Connection Diameter of Thicknessing Extraction Ports: 2 x 120 mm Codehkz E Tspfx Actsha Thickness Planer Minimum Working Height: 3 mm Maximum Working Height: 230 mm Maximum Cutting Depth: 5 mm Electrical Data Main Drive Motor Power: 5 kW Connection Voltage: 400 V Mains Frequency: 50 Hz Cutterblock Type: TERSA Number of Knives: 4 pcs Speed: 5200 rpm Maximum Planing Width: 410 mm Feed Feed Speed: 6 / 12 m/min The TERSA cutterhead system ensures particularly quiet operation. Helically serrated steel infeed roller for consistent and even material feed Material feed with two selectable speeds Numerical digital readout for thickness table height The 2,000 mm long jointer tables allow easy jointing of large workpieces. Worktables are made of cast iron, annealed and stress-relieved, ensuring durability and long-term flatness Robust, large aluminium fence with round bar guide (1200 x 160 mm) Thickness table adjustment via handwheel with numerical digital height display The high machine weight provides maximum precision and smooth operation. Powerful industrial motor Sturdy steel/cast-iron construction Feature Details Jointer Fence Sturdy, large jointer fence made of aluminium (1200 x 160 mm) with precise round bar guidance Dust Extraction Hose Connection The extraction ports for jointer and thickness planer are both oriented in the same direction, allowing the extraction hose to be connected to both planing modes from one side of the machine. No need for a hose to run around the machine. Cutterhead Assembly Helically serrated steel infeed rollers for consistent and even material feed Heavy-duty anti-kickback fingers to prevent workpiece kickback 4-knife cutterblock ensures an optimal planed finish Chain Drive Robustly designed chain drive Drive sprockets made of steel Massive cast iron bearing blocks Two Feed Speeds Standard with two feed speeds, conveniently selectable from the machine’s operator side Material Feed Helically serrated steel infeed rollers ensure consistent and even material feeding without indentations Multiple teeth engage at the same time for powerful feeding Maintenance-free compared to rubber feed rollers Thickness Table Adjustment Adjustment via handwheel Numerical digital display of planing height Accurate to 1/10 mm Tersa Cutterblock No setting or screwing required Knife changes in seconds Self-locking Exceptionally quiet Perfect planing results Location: Ex stock 54634 Bitburg - immediately available - Subject to prior sale

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and joiners The especially long one-piece surfacing tables enable easy planing of workpieces Working tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening surfacing tables with tension spring support ensure quick and convenient retooling Thanks to the fixed-mounted extraction hood, there is no need to switch the extraction hose during changeover, saving valuable working time The helically toothed steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknesser exit ensures uniform wood outfeed Cjdsff Hdpepfx Actjha Material feed with four speeds Thickness table adjustment via handwheel with integrated height indicator DIGITAL version: with electric thickness table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit Quality made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Joiner/Surfacer Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thickness extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: Dimensions account for maximum travel or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connected voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, Description Technical Data Scope of Delivery Accessories Equipment Options Ideal for demanding craftsmen and joiners The extra-long, one-piece surfacing tables ensure easy workpiece guidance. Work tables are made of cast iron, making them resistant to wear and permanently flat. Rearward, simultaneously opening surfacing tables with spring-assisted support for quick and convenient changeover. Thanks to the fixed-mounted extraction hood, changing the extraction hose during retooling is unnecessary—saving valuable working time. Helically serrated steel infeed roller ensures constant and even feed of the timber. Rubber outfeed roller at the thicknesser exit guarantees smooth timber discharge. Material feed with four speeds. Codpfx Asff Hdmecteha Thicknessing table adjustment via handwheel with integrated display for planing height. On/off switch positioned conveniently for the operator. Powerful industrial motor. The high machine weight ensures maximum precision and smooth operation. Prepared for mortising unit installation. Quality made in Italy. Dimensions and Weights Length approx.: 2250 mm Width/depth approx.: 1370 mm Weight approx.: 695 kg Surfacing Total table length: 2250 mm Max. depth of cut: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Setup Information Required length: 2250 mm Required width/depth: 1440 mm Space requirement explanation: The dimensions account for maximum travel or usable length. Thicknessing Thicknesser table length: 520 mm Thicknesser table width: 850 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. depth of cut: 5 mm Electrical Data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2026, Combined Saw-Spindle Moulder minimax st 3c F 16 Tilting saw blade, tilting spindle moulder, and format sliding table made from anodized aluminium Robust steel and cast iron construction Large support surface and precision-cast table High-precision format sliding table made of anodized aluminium (travel distance 2250 mm) Large crosscut frame (900 x 600 mm) with aluminium telescopic fence extendable up to 2660 mm with professional flip stops Max. saw blade diameter 315 mm with scoring unit, tiltable from 90° - 45° Saw rip fence with fine adjustment Sturdy saw unit and large double trunnion spindle moulder unit ensures maximum stability, precision, smooth operation, and long service life Solid and precise machine table made from stress-free cast iron Three manually adjustable spindle speeds from 3500 - 10000 rpm With forward and reverse spindle rotation Standard arc milling guard Safety reversing aluminium fence jaws Two motors with high power reserves Two removable handwheels for convenient and quick operation Dimensions and Weights Weight approx. 470 kg Dust Extraction Connection Dust extraction port diameter 2 x 120 mm Saw blade guard dust extraction port diameter 60 mm Electrical Data Drive motor power 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Spindle Moulder Chjdpfxshp Rdlo Actoa Spindle tilt 0 – -45 ° Usable spindle length 100 mm Spindle speeds 3500/7000/10000 rpm Max. cutter diameter not retractable 210 mm retractable 180 mm tenoning 275 mm Circular Saw Unit Crosscut length 1600 mm Cut width with rip fence 900 mm Max. crosscut width left of saw blade 2660 mm Saw blade tilt 90–45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade projection 90° 100 mm Max. saw blade projection 45° 78 mm Main saw blade diameter 315 mm Main saw blade diameter explanation independent of scoring unit Main saw blade speed 4000 rpm Sliding Table and Table Table length 1112 mm Table width 430 mm Scope of Delivery: Arc milling guard Anodized aluminium format sliding table Aluminium fence jaws Flip stops Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Combination machine 4-in-1 HOLZKRAFT CU 410c F 26 N Tersa -- Technical Specifications -- - Circular Saw - Edging length: 2,600 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 100 / 79 mm Max. crosscut width to the left of the saw blade: 2,310 mm Rip capacity at parallel fence: 900 mm Saw blade tilt: 90° - 45° - Planer - Working width: 410 mm Planer table length: 1,660 mm Cutterblock diameter / number of planer knives: 72 mm / 3 pcs - Thicknesser - Table dimensions: 410 x 605 mm Chodpfx Aod Dtc Toctja Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 6,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter (saw blade guard): 60 mm - Special Price - Location: Ex stock 54634 Bitburg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, minimax c 26g TERSA – Multi-function combination machine for sawing, milling, planing and thicknessing. The work tables are made from heavily ribbed grey cast iron and the frame is constructed from welded steel, ensuring outstanding torsional rigidity and vibration-free operation. Unique in its class: smooth-running anodised aluminium sliding table with ball contact system. Tilting saw blade from 90° to 45°. Table extension with aluminium crosscut fence for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically-toothed steel infeed roller for constant feed when thickness planing. Radius milling guard for profiling operations, standard with fine adjustment. Milling unit with two speeds. Three independent motors, one for each working unit. Quality Made in Europe. Equipment details Aluminium sliding table With proven ball contact system, used millions of times Dust and dirt-resistant thanks to minimal contact area between ball and trapezoidal rail Permanently smooth-running Saw unit adjustment Manual height and tilt adjustment of the saw unit via handwheel Precise positioning using a scale TERSA planer knife shaft No more setting and screwing Planer knife changes in seconds Self-locking Particularly low-noise Spindle moulder The milling unit features two speeds for flexible tooling options. The machine is equipped with a finely adjustable radius milling guard for profiling. With the aluminium sliding table, tenoning operations are easily possible. Thicknesser With the powerful thicknessing feed, workpieces up to 200 mm height can be planed. The helically toothed infeed roller guarantees consistent material feed. The jointer table folds up space-savingly towards the inside of the machine. Conversion from surface planer to thicknesser is completed within seconds by a single lever. Surface planer Standard with TERSA quick-change planer knife system Large dimensioned planing tables Planing and thicknessing tables made from grey cast iron guarantee maximum smooth running and vibration-free operation. Saw unit Saw tiltable up to 45° With 250 mm diameter saw blade, max. 80 mm cutting height Rip cuts up to 500 mm with parallel fence Table extension With angle scale and aluminium crosscut fence for mitre cuts on panels and large workpieces Scope of delivery: Tersa quick-change planer shaft Anodised aluminium sliding table Mitre fence with flip stop Multi-function fence for rip and surface planing Eccentric clamp arm Model: minimax c 26g TERSA Item no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width left of saw blade: 1200 mm Saw blade tilt: 90 - 45 degrees Max. cutting height at 90°: 80 mm Chodpfx Aodqzh Tjctja Sliding table length: 1140 mm Sliding table width: 201 mm Sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer shaft type: TERSA Planer shaft diameter: 62 mm Number of planer knives: 3 pcs Jointer table width: 260 mm Jointer table length: 1040 mm Saw/jointer fence tilt angle: 90/45 degrees Max. jointer depth of cut: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. working height in thicknesser: 3 mm Location: Ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Spindle Moulder minimax tw 45c With aluminium sliding table and tilting spindle – high performance at a low investment Article number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and Weights Weight (net) approx. 290 kg Dust Extraction Connection Extraction port diameter 2 x 120 mm Work Table Work table length 1000 mm Sliding table length 1000 mm Work table width 435 mm Sliding table width 270 mm Table height 900 mm Installation Information Required length 1945 mm Machine body width/depth 710 mm Required width/depth 2220 mm Working area length 1600 mm Explanation required space The dimensions take into account the maximum travel distances or usable lengths. Working area width/depth 1600 mm Machine body length 1000 mm Working area explanation Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Electrical Data Mains voltage 400 V Main drive motor power 5.0 kW Mains frequency 50 Hz Spindle Moulder Spindle tilt 0 to -45° Spindle speeds 3500/7000/10000 min⁻¹ Usable spindle length 100 mm Spindle shaft diameter 30 mm Cedpfx Acohp Rcyeteha Maximum spindle projection above table 130 mm Maximum Cutter Diameter Max. retractable cutter diameter 180 mm Max. cutter diameter for tenoning 275 mm Max. cutter diameter for profile milling 210 mm SCOPE OF DELIVERY Curved workpiece safety hood Anodised aluminium sliding table Telescopic mitre fence Aluminium fence jaws