Ostas Kmrp-1,2 nakup rabljenega (1.021)

Stanje: rabljeno, prevoženi kilometri: 48.811 km, moč: 125 kW (169,95 KM), prva registracija: 04/2021, vrsta goriva: dizel, skupna masa: 3.500 kg, naslednji pregled (TÜV): 03/2027, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, število sedežev: 3, dolžina tovornega prostora: 3.550 mm, širina tovornega prostora: 2.060 mm, višina nakladalnega prostora: 380 mm, Oprema: ABS, centralno zaklepanje, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, * SPRINTER 317 CDI 3-stranski kiper 3,55 m * Aluminijasta kiperska nadgradnja DAUTEL Bdjdpfx Agoy Rbhdo Ejd * Dovoljena skupna masa 3.500 kg + nosilnost cca. 1.195 kg * Št. vozila za povpraševanja strank: 4698 * Polavtomatska klimatska naprava TEMPMATIC * Okoljska značka (zelena) * Aktivni zavorni asistent * Centralno zaklepanje z daljinskim upravljalnikom * OM 654 DE 20 LA 125 kW (170 KM) 3800/min * Redno servisiran s servisno knjižico * Filter delcev * Asistent za bočni veter * Voznikov zračni meh (airbag) * MBUX multimedijski sistem s 7-palčnim zaslonom na dotik * Trosedež * Servo volan * Pnevmatike 235/65 R16 C * Polica nad vetrobranskim steklom * Zunanja ogledala električno nastavljiva in ogrevana * Prikaz zunanje temperature * 3,5-tonski * Medosna razdalja 3665 mm * Toplotno izolirano steklo z obarvanim trakom na vetrobranskem steklu * Obe zunanji ogledali električno nastavljivi in ogrevani * Asistent za luči * Glavni rezervoar 71 litrov * Ojačana sprednja os * Predal pod armaturno ploščo * Umetno usnje ARTICO črne barve * Emisijski razred Euro 6d-TEMP N1 * ECO Start-Stop funkcija * Digitalni radio (DAB) * Pomoč pri speljevanju v klanec * Privezne točke * Priprava za 3-stranski kiper * Koda za domači trg * Kabina S (kratka) * Zadnja stena kabine z oknom * Večfunkcijski volan Brez odgovornosti za tiskarske in pisne napake Prodaja samo pravnim osebam / podjetjem Pridržujemo si pravico do sprememb, napak in vmesne prodaje. Opis služi za identifikacijo vozila in ne predstavlja jamstva v pravnem pomenu. Merodajen je opis v skladu s kupoprodajno pogodbo. * VRHUNSKA STORITEV + KAKOVOST * Pripravimo vam lahko ponudbo za LEASING-FINANCIRANJE-NAKUP NA OBROKE Garancijsko zavarovanje možno na zahtevo pri zavarovalnici * TÜV / UVV LBW / preverjanje tahografa in vgradnja OBU-naprave pri naših partnerjih na lokaciji * Carinska registrska tablica za 30 dni Vsa potrebna carinska dokumentacija za izvoz je možna, a mora biti posamezno zahtevana * PLAČILO CESTNINE (MAUT) za Toll-Collect izvedljivo v podjetju * Brezplačen prevoz z letališča Stuttgart ali železniške postaje Metzingen (Württ) * ŽELEZNIŠKA POSTAJA ZA PRIHOD: 72555 METZINGEN/WÜRTT. * ZA ANGLEŠČINO * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP številka * * ---- Obiščite nas na naši spletni strani * stalno več kot 200 vozil na zalogi

Stanje: novo, Leto izdelave: 2026, Folding machine ZGR2000/1.2 from Prod-Masz available on-site for testing and immediate pickup. On-site professional instruction provided. - Working width: 2140 mm Bsdszfirkjpfx Ag Esdd - Sheet thickness: up to 1.2 mm - Bending angle: up to 145° - Throat depth: 80 mm - Gas pressure springs - Angle scale - Stop for pre-set bending angles - Front depth stop - Sheet metal tray - Weight: approx. 250 kg Accessories – Rotary shear (up to 0.8 mm): 350 EUR Shipping within Germany: 180 EUR All prices are subject to an additional 19% VAT. CE certificate Warranty: 12 months Self-collection Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request.

Stanje: novo, Leto izdelave: 2026, RED Plus 2200/1.2 folding machine by Prod-Masz on site for testing and immediate collection. On-site professional instruction included. Technical specifications: - Working length: 2060 mm - Bending capacity: up to 1.2 mm - Bending angle: max. 160 degrees - Bending beam thickness: 15 mm - Upper beam stroke: 80 mm - Weight: approx. 420 kg - Upper beam height adjustment in three positions Equipment: - Angle scale - Angle stop - Rear frame - Front depth stops Bdjdpfxjzdcmye Ag Esd - CE certificate -12 months warranty Accessories – Roller shear (up to 0.8 mm) €350 Shipping within Germany €180 All prices are subject to an additional 19% VAT Self-collection possible

Stanje: novo, Leto izdelave: 2026, Folding machine RED ZGR-2200/1.2 from Prod-Masz available on site for testing and immediate pick-up. Professional instruction provided on site. Technical data: - Working length: 2060 mm - Bending capacity: up to 1.2 mm - Bending angle: max. 160 degrees - Clamping beam thickness: 15 mm - Upper beam lift: 80 mm - Weight: approx. 420 kg - Upper beam raising in three positions Bdedpfx Agozdcmts Eod Equipment: - Degree scale - Angle stop - Rear frame - Front depth stops - CE certificate - 12-month warranty Accessories – Roller shear (up to 0.8 mm) 350 EUR Shipping within Germany: 180 EUR All prices are subject to an additional 19% VAT. Self-collection possible

Stanje: novo, Leto izdelave: 2026, Prod-Masz folding machine available on site for testing and immediate collection. Professional on-site instruction included. Folding Machine ZGR2500/1.2 - Working width: 2640 mm - Sheet thickness: up to 1.2 mm - Bending beam: 25 mm - Bending angle: up to 145° - Gas pressure springs - Angle scale - Adjustable stop for preset bending angles - Front depth stop - Sheet metal storage tray - Weight: approx. 400 kg Other sizes (1000, 1400, 2140, 2640, 3140, 3640, 4140 mm) available on request Optional accessory: Rotary shear (up to 0.8 mm) 350 EUR All prices are subject to an additional 16% VAT. CE certificate Bjdszdcmgopfx Ag Eedd Self-collection Shipping within Germany: 240 EUR

Stanje: novo, Leto izdelave: 2026, delovna širina: 31.400 mm, Kot upogiba (maks.): 155 °, skupna masa: 700 kg, skupna dolžina: 36.000 mm, skupna širina: 900 mm, skupna višina: 1.100 mm, trajanje garancije: 12 meseci, debelina upogibnega ličeca: 30 mm, prosta razpetina: 80 mm, delovna višina: 900 mm, Oprema: dokumentacija / priročnik, Free delivery up to 150 km. ABKANTBANK-Technik Halver – YOUR competent partner for folding machines. We are your point of contact for high-quality sheet metal processing. As a long-standing distributor for the Polish manufacturer PROD-MASZ, we cater directly to our customers' needs and see ourselves as an extension of the manufacturer's production. Machines can be demonstrated on-site as required, including professional advice and proper instruction. We offer tailored consultations to meet your specific requirements and look forward to your inquiries. Folding machine ZGR3000/1.2 by Prod-Masz in stock for immediate testing and collection. Technical Specifications: - Working width: 3140 mm - Sheet thickness: up to 1.2 mm - Non-ferrous metals: 30% higher sheet thickness - Bending angle: up to 155° - Bending beam: 28 mm - Clearance: 80 mm - Gas struts - Degree scale - Adjustable stop for pre-set bending angles - Sheet support tray - Weight approx. 700 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request. Optional accessory – roller shear (up to 0.8 mm): 350 EUR All prices plus 19% VAT. CE certificate included. Warranty: 12 months. Self-collection possible. Shipping within Germany: 360 EUR. Bsdpozdcmaefx Ag Eedd

Stanje: novo, Leto izdelave: 2026, Free delivery within 150 km. ABKANTBANK-Technik Halver, YOUR competent partner for press brakes We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Machines can be demonstrated if required, along with professional advice and qualified training. We provide personalised consultations—tailored to your requirements—and look forward to your inquiry. Guillotine Shear 3000/1.0mm - Working length: 3000 mm - Stable and robust construction, suitable for steel sheets up to 1.2 mm - Large cast worktable - Open design for continuous cuts - Rear gauge with scale - Declaration of conformity - CE marking Dimensions: Bjdpfx Agszdclps Ejdd Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 700 kg Throat depth: 8 cm Shipping within Germany: €390 All prices are subject to an additional 19% VAT. Self-collection Cash payment upon delivery Other sizes from 1000 mm to 3000 mm available on request Contact:

Stanje: novo, Leto izdelave: 2026, moč: 2,2 kW (2,99 KM), ABKANTBANK-Technika KRUSE, Dodanie zadarmo do 150 km. Váš odborný partner pre NOŽNICOVÉ STRIHAČKY a OHÝBACIE LISY. Sme Vaším partnerom pre kvalitné stroje na spracovanie plechu. Na požiadanie môžeme predviesť príslušné stroje vrátane odborného poradenstva a profesionálneho zaškolenia. Radi Vám poskytneme individuálne poradenstvo podľa Vašich požiadaviek a tešíme sa na Vašu požiadavku. Hydraulické tabuľové nožnice 3000/1,2 mm GLT3050 - Pracovná dĺžka: 3050 mm - Stabilná a robustná konštrukcia pre oceľové plechy do 1,2 mm - Veľký liatinový pracovný stôl - Otvorená konštrukcia vhodná na nekonečné strihanie - Zadný doraz s mierkou - Vyhlásenie o zhode - Značka CE Rozmery: Dĺžka: 3500 mm Šírka: 750 mm Výška: 1150 mm Hmotnosť: cca 1000 kg Priechod: 80 mm - Výkon motora: 2,2 kW - Hydraulický olej: HL 46 Bedpfx Agozdclvj Eedd - Strihacia sila: 4 t - Pracovný tlak: 120-150 bar Doprava po Nemecku: 330 € Všetky ceny sú uvádzané bez DPH 19%. Osobný odber možný Platba v hotovosti pri dodaní

Leto izdelave: 2021, stanje: novo, Cantilever rack, single-sided, 3.70 m height, 1.20 m arms, 500 kg per arm – new equipment: Price ex location incl. loading! 1 rack unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by leaving out or purchasing additional frames, you can also build longer or shorter rack units (also by varying the bay spacing); this example with 4 frames is simply the most common rack solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Bsdpfof Tv T Nex Ag Esdd Single-sided uprights, approx. 3,700 mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable cantilever arms Load capacity with center of gravity at 600 mm: 500 kg per arm / 2,700 kg per upright With 4 uprights per beam level: 4 x 500 kg = 2,000 kg Supplied with longitudinal and diagonal bracing, pitch = 1,300 mm; standard is 1.30 m – unless otherwise specified, racks will be supplied with a bay spacing of 1.30 m. Other bay spacings available – e.g. 1 m, 1.25 m, and for a small surcharge also 1.50 m or special dimensions! As standard, the length of a racking row with 4 uprights is approx. 4,000 mm. Delivered including all bolts and nuts, without floor anchors. Other configurations (frame height, arm lengths, arm designs etc.) available! Please contact us!

Stanje: novo, prevoženi kilometri: 500 km, moč: 70 kW (95,17 KM), vrsta goriva: električni, skupna masa: 4.250 kg, barva: bela, število sedežev: 3, skupna dolžina: 6.040 mm, skupna širina: 2.200 mm, skupna višina: 2.780 mm, prostornina tovornega prostora: 15 m³, dolžina tovornega prostora: 3.400 mm, širina tovornega prostora: 2.080 mm, višina nakladalnega prostora: 1.570 mm, Leto izdelave: 2023, * Orten CityRollup body * All-aluminum body with sectional roller shutters * 2 compartments at 2,057 mm each + 2 compartments at 1,320 mm each Bedpfsqz R Dmsx Ag Ejdd * DEKRA certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf-sprung suspension ORTEN Electric-Trucks E 35 with roller shutter body: Pricing takes available subsidies into account Technical Data - Chassis: Manufacturer: ORTEN Vehicle class: N2 Gross vehicle weight: 4,250 kg (drivable with driver's license class B) Curb weight: 2,295 kg Wheelbase: 3,745 mm Tyre size: 185/75 R 16C Equipment: Seating: 1+2 * Rear axle ratio: i = 4.1 * Rear axle stabilizer * Front disc brakes * Rear drum brakes * Driver airbag * Fog lights * Heat-insulating glass * 'Luxury' driver's seat version * Central locking * Electrically adjustable exterior mirrors * Storage compartments in front doors left and right * Multimedia 2DIN with USB port * Hands-free system * ABS * Summer tyres * Spare wheel, supplied separately * Wheel chock with holder (N2 vehicle class) * Cabin color similar to signal white RAL 9003 * Chassis color graphite black * Rim color silver * Warning triangle * First aid kit * Warning beacon * Operating manual Technical Data - Conversion: * Maximum speed: 85 km/h * Range: approx. 200 km * Battery: Lithium iron phosphate (LFP), nickel and cobalt free * Battery capacity: 80 kWh, 400 V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22 kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70 kW / Peak 92 kW * Torque: 410 Nm / Peak 730 Nm Technical Features: * Regenerative braking * 22 kW on-board AC charger * DC/DC low-voltage converter * Electric power steering support * BMS CAN-BUS-controlled charging technology * Electric 5 kW HV cab heater * Color display showing all relevant battery, BMS, motor, and control unit data * Integrated diagnostics menu for motor control and BMS in the information display * Integrated diagnostics menu for battery cell monitoring in the information display * Structural elements in stainless steel * Battery heating system HV 400 Volt / DC (charging mode only) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup Body Body Dimensions: Overall length: approx. 3,600 mm Floor slope: 0 mm Overall height: approx. 2,360 mm Bay width: front 2,057 mm / rear 1,320 mm Overall width: approx. 2,200 mm Bay height: 1,575 mm Aluminum roller shutters: Spring-assisted rolling. Rubber strap for lowering the shutters. When closed, the doors are centrally secured by a locking handle, which is mounted on both sides of the front wall and can be locked by a padlock. Pallet Stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded, to prevent goods from sliding against the door Underrun Protection: Original chassis underrun protection is used Rear Wall: Fixed rear wall. Double-walled with aluminum cladding and smooth surface. Painting: Body painted on the outside in RAL color tone. Lettering can be applied according to customer specification at extra cost. Side steps: The lateral underrun protection is formed by entry steps with a non-slip surface for the driver. Steps run along the body on both sides of the vehicle, between the axles and behind the rear...

Stanje: rabljeno, prevoženi kilometri: 155.000 km, moč: 51 kW (69,34 KM), prva registracija: 12/2009, vrsta goriva: bencin, naslednji pregled (TÜV): 08/2025, barva: rdeča, vrsta prenosa: mehanski, emisijski razred: Euro 4, število sedežev: 4, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, sistem za imobilizacijo, Hello! We are pleased to welcome you to our company. We are pleased to offer you the following vehicle with this specification: Please be sure to leave your telephone number in your message! * Heated seats * Electric windows on both sides * Air conditioning * Valid general inspection (HU) until 08/2025 * Roof spoiler in vehicle color * Individual interior styling package * Front seat heating * Individual styling package * Titanium X Package 1 * Outdoor temperature display * On-board computer * Electronic brake force distribution * ISOFIX child seat mountings Bdsdpfjtxfn Nsx Ag Eod * Engine 1.2 L - 51 kW 8V CAT * Split/folding rear seat Our services: - Fresh MOT and emissions certificate (TÜV + ASU) - Nationwide delivery across Germany - Test drives possible at any time - Attractive financing conditions - Vehicle trade-in accepted Showroom open Sundays by appointment

Leto izdelave: 1978, stanje: rabljeno, 1,2 t, Außendurchmesser der Coils 1.650 mm Bodpfxotn Dis Ag Esdd 20 - 300 x 0,4 - 3,5 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base foot, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts and washers) Bdedpfsfdkb Tjx Ag Ejd - Delivery time approx. 1 week - No damaged parts! - Spare parts reordering and extension possible at any time - Offer available in larger quantities: approx. 90 uprights in stock Detailed description: - Robust steel construction made of IPE sections (bolted system) - Hot-dip galvanized finish - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - With assembly instructions and load plates C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The subsoil must be concrete, level and suitable for dowelling, and must be able to bear the loads applied. Floor condition, load-bearing capacity and any necessary official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to accident prevention regulations, it is recommended that rack uprights feature at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolt system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams, 1,500 mm cantilever, pre-drilled for on-site roof construction (*excluding timber purlins and trapezoidal sheets for the roof construction) - Including longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and system can be extended at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction using IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments Bdsdsh R Taqjpfx Ag Ejd - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,500 mm center-to-center spacing - Rack length: 12,100 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with scheduling prior to delivery. Material is sensibly packed for easy unloading. The installation surface must be concrete, level, suitable for dowelling, and able to withstand the loads applied. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any official permits that may be required. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to occupational health and safety regulations, it is recommended that the rack uprights have at least 500 mm clearance above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg Bedped Tqalefx Ag Esdd - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) Bdjdpfxsfdkb Uo Ag Eod - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) Bjdpfx Agjmhhy Ne Eedd - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: Bdjdpfx Agsfdkbhe Ejd - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Bdjdoguk Dkopfx Ag Esd - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: pripravljen za uporabo (rabljen), Servo frekvenčni pretvornik Bodpfsx Nmnaox Ag Eedd REXROTH Rexroth Indramat prej je bil vgrajen v DIMTER kapno žago

Stanje: novo, Leto izdelave: 2025, Beading machine for sheet metal 1.2 mm electric Sheet metal thickness (beading): 1.2 mm Adjustable stop bar Roller profiles can be custom-made to order and are included in the machine price Sturdy and robust construction with a modern design Prod-Masz beading machines are perfectly suited for producing a variety of bead types. Includes 4 pairs of beading and edging rollers. Designed for precise shaft support. We look forward to your inquiry! Bdodob Hqbcjpfx Ag Eod We issue invoices at 0% VAT (intra-community delivery) as well as with 19% VAT.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 129 kg, Leto izdelave: 2026, Oprema: hidravlika, nizka raven hrupa, The TEC-POINT KT45S hydraulic breaker—silenced version—is the professional solution for demolition, concrete breaking, foundation work, civil engineering, trenching, landscaping, municipal construction sites, inner-city use, and operations in noise-sensitive environments. The fully enclosed housing reduces noise emissions and protects the internal components. The replaceable upper rotation head ensures flexible applications, while the increased overall length enables an extended reach and efficient energy transfer. ✅ Complete set for mini and compact excavators from 1.2 to 3.0 tons ✅ New device / unused 📍 Immediately available from our Rheda-Wiedenbrück warehouse 🚚 Collection on site or Europe-wide shipping via freight forwarder possible 💶 Price: €1,699 net plus VAT 🧾 Invoice including VAT will be issued 🛠️ Complete set: includes 2 pointed chisels, nitrogen bottle, hydraulic hose set, and service case—ready for immediate use! ⚙️ Technical Specifications: 🔹 Model: KT45 Silenced Type 🔹 Version: sound-insulated 🔹 Suitable for excavator weight: 1.2–3.0 tons 🔹 Weight: 129 kg 🔹 Operating pressure: 90–120 kg/cm² 🔹 Required oil flow: 20–40 l/min 🔹 Blow frequency: 700–1200 blows per minute 🔩 Connection Dimensions / Compatibility: 🔹 Mounting width: 97 mm 🔹 Pin center distance: 92 mm 🔹 Pin/Bore diameter: Ø 30 mm 🔹 Chisel diameter: 45 mm On request, a suitable mount can be supplied to fit your excavator model. 📍 Location TEC-POINT GmbH Kupferstraße 10 33378 Rheda-Wiedenbrück Bsdey Ny Igepfx Ag Eodd Germany 📞 Contact & Viewing Feel free to contact us today—we offer personal advice and will help you select the right hydraulic breaker for your carrier machine. We invite you to visit our warehouse in Rheda-Wiedenbrück. Onsite, you can view, compare, and test our machines and attachments by arrangement. We look forward to your inquiry!

Stanje: novo, Leto izdelave: 2025, Stable and robust design in modern execution The Prod-Masz beading machines are ideally suited for producing various bead types. Includes 4 pairs of beading and flanging rollers. Features precise shaft bearing. - Maximum beading sheet thickness: 1.2 mm - Adjustable bumper regulation - Stable and robust construction in a modern design - Roller profiles can be customized within the machine price (on request) - Option to equip with a gear motor (at additional cost) Bsdpobn Ek Njfx Ag Ejdd We look forward to your inquiry! We issue invoices with 0% VAT (intra-community delivery) as well as with 19% VAT.

Stanje: novo, Leto izdelave: 2025, Company Prod-Masz is your competent and professional partner for the manufacturing of sheet metal working machines. Trust, honesty, and reliability are not just empty words for us! Model: ZGR-2140/1.2 Technical specifications: - Maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (steel sheet) Bjdpsccfh Hsfx Ag Ejdd - Bending angle: max. 145 degrees - Bending beam thickness: 24 mm - Upper beam can be raised in three positions - Gas pressure springs - Clearance opening: 80 mm - Angle scale - Angle stop - Rear frame for sheet support - Front depth stops - Weight: approx. 290 kg - The machine complies with CE regulations and comes with a 12-month warranty. Roller shear for up to 0.8 mm sheet thickness available for an additional 350 Euros Price: €1,550.00 Shipping: €180 Delivery time: 2-4 days Cash payment upon delivery We look forward to hearing from you!

Stanje: novo, Leto izdelave: 2026, Folding Bench by PROD-MASZ – Your Best Choice! Reliable equipment and on-time deliveries. FOLDING BENCH 2.14 m / 1.2mm Bdodpfx Agob Na Eqo Eod Shipping: €180 Those who know us, know that we keep our word :) Bending angle: 145° Working length: 2.14 m Width: 0.90 m Height: 1.20 m Clearance of upper beam: 80 mm Bending beam: 24 mm Steel sheet: 1.2 mm For non-ferrous metals, approx. 30% higher bending capacity. The adjustment system enables precise bends for different sheet thicknesses. The rear support is stable and easy to dismantle. Weight: 290 kg Rotary shear 0.8 mm: plus €350 Manual beading machine: plus €75 Delivery time: weekly Cash payment upon delivery We look forward to your inquiry! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT (German invoice).